SPECIAL REPAIR TO BLDG NO VII (PORTION OF 6 DET SCLU), SPECIAL REPAIR/REPLACEMENT OF TOILET OF OR MD ACCN OF BLDG NO P-XVI (GROUND FLOOR) INSIDE FORT, PROVN OF BOUNDARY WALL FROM EMB HQ GAURD POST NO 01 TO MT SHED OF EMB HQ AND PROVN OF SANITARY ANNE

Amount

Surface dressing n. exc. 15cm deep and getting out in soft/ loose soil all as specified and directed.

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, etc., n. exc. 10 sqm on plan getting out complete all as specified and directed.

M&L sand filling under floors or in foundation including watering, well ramming & consolidating in layers not exceeding 25cm thick complete all as specified and directed.

Returning filling in including spreading, leveling, watering & well ramming in layers not exceeding 25cm thick in soft/ loose soil complete all as specified and directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for broken stone or boulders hardcore of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Supply only Integral liquid Water Proofing Compound conforming to IS: 2645-2003.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling mass concrete, sub base of floors etc. complete all as specified and directed.

M&L for providing RCC (1:1½:3) type A-1 using 20mm graded stone aggregate as in plinth beams complete all as specified and directed.

M&L RCC (1:1½:3) type A-1 using 20 mm graded aggregate in Fins, fascias, louvres, parapets, & the like complete all as specified and directed.

M&L reinforced cement concrete RCC (1:1½:3) type A-1 grade using 20 mm grade granite stone aggregate as in lintel, roof beams all as specified and as directed

M&L for RCC (1:1½:3) type A-1 using 20mm graded stone aggregate as in roof slabs supported on walls, beams and columns in floors, roofs, deck slabs and the like all as specified and directed.

M & L for PCC 1:2:4 Type B-1 (using 20mm graded stone aggregate) as in roof kerbs levelling course .finishing the surface by even and rough for receiving floor finishes complete as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:4) complete all as specified and directed.

M&L Cutting holes into or through brickwall built in cement mortar and making good in CM 1:3 or cement concrete 1:2:4 type B-1 as required of superficial area exc 150 sqcm but n.exc 400 sqcm all as specified and directed by Engr-in-Charge.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, including supports, overhangs, etc. also splays between floors and beams complete of flat rough finished surfaces of concrete all as specified and directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work, not exc. 200mm thick (Horizontal or sloping) for fair finished surfaces of concrete flat complete all as specified and directed.

Use and waste of formwork to fins, louvers, fascia. Fair finished surfaces of concrete flat all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings exc. 1.5sqm but n. exc. 4 sqm each complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n.exc 1.5sqm each complete all as specified and directed.

S&F 2nd class hardwood plain solid straight chowkats and frames wrought framed rebated on solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

S&F 2nd class hardwood factory made panelled shutters 35mm thick, plain framed (any no of panels) with panels of timber flat on both sides (feather edged) or 12mm veneered particle board commercial veneering on both faces, the size of rail and stile as per IS :1003(Part-I), kiln seasoned and chemically treated and fitted to chowkats all as specified and directed.

S&F 2nd class hardwood glazed and skelton shutters 35mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mltred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.24 (a) supplied and fitted to chowkats with plain, chamfered or rounded mited and rebated bars any numbers.

Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastener all as specified and directed.

S&F factory made solid PVC moulded door shutter with particle board core, 28 to 30mm thick(stiles) with 2,4,6 raised panel design with 2mm thick moulded prelam PVC sheet on front face and 2mm thick moulded prelam PVC sheet on back face supplying and fixing in frame at site as per specification an drawing and all as directed ,

S&F mild steel butt hinges, medium weight cold rolled 100mm size all as specified and as directed.

S&F stainless steel butt hinges, medium weight cold rolled 100mm size all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 200mm long all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long all as specified and as directed.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size

S&F extruded aluminium alloy handles cast type anodised 150mm size all as specified and directed.

S&F aluminium alloy anodized sliding door bolts; 250mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolts 300mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections complete all as specified and directed.

S&F Aluminium alloy wire mesh, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S&F fixed in repairs Aluminium alloy wire mesh, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed.

S & F of 2nd class hard wood fillets Exc 13 & n.exc 25 sq.cm in square, rectangular in section clean sawn secured with screws etc complete all as specified and directed.

M&L for mild steel TMT bars in reinforcement, 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and as directed.

M&L mild steel TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

M&L for rolled mild steel joist, channels, angles, or tee sections, fixed independently, without connecting plates, etc as in Madras Terrace roof of Fe-410-W (gde-E-250) Quality B all as specified and directed by Engr-in-Charge.

M&L for 40mm thick Damp proof course to horizontal or vertical surfaces including necessary formwork in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate all as specified and directed by Engr-in-Charge.

M&L for Applying evenly a coat of blown type bitumen @1.50 kg / Sqm and blinding with clean dry sand @ 0.05 Cum/ Sqm all as specified and directed by Engr-in-Charge.

S&F powder coated aluminium window and ventilator shutters side hung type without sash bar using aluminium section weighing not less than 0.55 Kg/RM including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings viz. 150mm long peg stay- 01 No., 100mm long hinge type B-21- 02 No. and suitable aluminium handle 01 No. complete all as specified and directed.

S/F fixing aluminium ventilators using alumimium section weighing not less than 0.62 Kg per RM for frame louvers aluminium anodised snap beads, screws and fixed alongwith with 5mm thick frostes/pin headed glass fixed with glazing clips, and one for wiremesh shutter fixed on frame etc (The rate is inclusive of all fixings of builders hard ware such as wirmesh hinges, bow handles, locking arrangements etc complete all as directed by Engr-in-Charge.

S&F Anodised Aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of gade AC15)pf approved design/pattern, with approved standard section and fixed to the existing window frame with C.P.brass/stainless steel screwa @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete as per requirement and direction of Engineer-in-Charge.

S&F Powder coating Anodised aluminium frame for doors, windows ventilators with one or more rebates (minimum thickness of powder coating 50 micron) including joining cleat for fixing etc. complete all as specified and directed by Engr-in-charge.

S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 or Fe 310-O all as specified and directed by Engr-in-charge.

S&F Hand rails, half round or other steel section or core for wooden hand-rail straight portion,drilled and countersunk for balusters running bars, fordoors, balusters, nosing to stepsincluding embeding in concreteand screwing etc. wind ties for roof including securing boltsposts and struts in fencingincluding cutting tops to shape as directed, drilling holes,notching for wire, etc.; flat iron fillets (for securing wire meshetc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engr-in-charge.

S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) all as specified and directed by Engr-in-charge.

M & L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/;itre and UV resistance as per IS 25489-2004, Alkali & fungal resistance, (Company Depot Tinted) with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

S&F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified.

M&L for light shade vitrified ceramic tiles 10mm thick (square/ rectangular) polished, area of each tile exc. 0.36 sqm but n. exc. 0.42 Sqm on vertical surfaces as in skirting laid over and including 15mm thick plaster in cement mortar (1:4) set & jointed in neat cement slurry & pointed in white or coloured cement to match complete all a specified and directed.

Ditto all as per item No 2 but on vertical surfaces as in skirtings over 10 mm thick plaster in CM(1:4) complete all a specified and directed.

M&L Non skid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.11 Sqm but n. exc. 0.18 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and as directed.

All as per Item No 56 above but as in skirting set and jointed in 10mm thick CM 1:4 complete all as specified and as directed.

M/L backing coat in CM 1:3, 10mm thick for fixing stone on vertical surfaces as skirting/dada/raiser to steps around pillars complete all as specified and as directed.

M & L for non skid ceramic coloured tile 7 to 8 mm thick Concept tiles design as approved (Sqaure or rectangular) area of each tiles eexceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc of pattern as approved over and including 15 mm thick screed bed in Cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and as directed.

Material and labour for glazed coloured ceramic Concept designer tiles of grade B-III, 7mm thick of size 300 X 600 mm as approved by GE, fixed in vertical surfaces such as in dado set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 10mm thick all as specified and directed.

M&L glazed coloured ceramic tiles of size 350mm x 250mm x 7mm/ 450mm x 300mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:4) complete all as specified and as directed.

Material and labour for glazed coloured ceramic designer tiles in vertical surfaces of size 300 X 200 mm as approved by GE set and jointed in neat cement slurry and pointed in white or coloured cement to match floor tile over and including a backing coat in Cement Mortar 1:4, 15mm thick all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixure of pigment to match the shade of granite stone including cutting & polishing over 15mm thick screed in CM(1:4) all as specified and directed.

M&L 100mm thick PCC type E-2, (1:5:10) using 40mm graded stone aggregate as in sub base complete all as specified and directed.

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base of flooring/ path complete all as specified and directed.

M&L 100mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate in panels finished even and smooth without using extra cement complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in plinth protection/ foot path etc. finished even and smooth without using extra cement complete all as specified and as directed.

M&L 20mm thick rendering in cement mortar (1:4) mixed with water proofing compound applied on roof surface complete all as specified and directed.

Taking down cement/lime plaster on brick work or stone walls etc. including racking out of joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering CM 15mm thick in two coats in CM 1:6 10mm thick under coat on 5mm thick in CM 1:4 finishing coat mixed with liquid water proofing compound 200ml pet 50kg bag of cement finished even and smooth without using extra cement. (Note:- Water proofing compound will be paid under measured seperatly) all as specified and directed.

M&L for rendering 5mm thick in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10mm thick in cement mortar (1:3) on concrete surfaces as in ceiling, finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on brick masonry surfaces or surface other than fair face of brickwork in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for applying three coats of white wash on ceilings including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying three coats of white wash on walls including preparation of newly plastered surfaces complete all as specified and as directed.

M&L for applying two coats of weather proof paint (APEX of approved shade) over a coat of alkali resistant primer incl preparation of newly plastered surface all as directed by Engr -in Charge.

M&L for preparation of old decorated plastered surfaces of walls including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceilings including brooming down or by steel wire brushing, scrapping down smoke soot, moss and efflorescent salts and treating oil & greasy spots and applying one coat of white wash complete all as specified and as directed.

M&L for applying two or more coats of 100% Premium acrylic amulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over new surfaces complete.

M&L for applying two coats of distemper oil emulsion over a coat of alkali resistant primer on newly plastered surfaces of walls including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and washing with water and bleaching powder solution, and applying two or more coats of 100% Premium acrylic amulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43litre/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm over old decorated plastered surfaces complete.

M&L for complete removel of existing treatment with electric operated blade, washing, rubbing down and stopping of distempered surfaces of wall and applying two coats of oil bound distemper over a coat of alkali resistant primer all as directed and specified

Supply and fix sheet glass 4mm thick plain, ordinary quality and glazing with oil putty in squares n.exc 0.50 sqm in each pane complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L for preparation of new wood surface of any description exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.

M & L for applying one coat of synthetic enamel paint including preparation of old treated steel surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed.

M & L for applying one coat of synthetic enamel paint including preparation of old treated wood surfaces of any description not otherwise described over 10 Cm girth or width all as specified and as directed.

S & F Vitreous china ware wash hand basin white flat back size 550x450mm, incl brackets and 32mm waste coupling and waste pipe fixed in repairs all as specified and directed complete all as specified and directed.

S&F 600mm x 450mm beveled edge looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs 600mm x 450mm beveled edge looking mirror 6mm thick with aluminium frame work fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F Hand dryier complete all as specified and directed by Engr-in-Charge.

Supply and fixed soap dish, matt finished chromium plated (MCH/Colour CP) as per cat noACN 1131N of Jaquar all as specified and directed by engr in charge

Supply and fixed vitrous china wash basin oval type of Make Prayag CAT PART No.4790 including waste coupling, waste pipe and brackets etc all as specified and directed by Engr in charge.

M&L Chromium plated Bottle trap with internal partition 33 mm size with 300 mm end 190 mm long wall connection pipes and wall flange as per cat No ALD 769L 300X190 of JAQUAR fixed in repairs all as specified and directed.

S&F Auto Soap Dispenser complete all as specified and directed by Engr-in-Charge.

S&F Auto Tissue Paper Dispenser complete all as specified and directed by Engr-in-Charge.

S&f in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers & waste; including bedding in CM to dwarf wall or including fixing cantilever brackets & connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm all as specified and directed by Engr-in-Charge.

S&F in repairs Vitreous China wash down water closet pan(Pedestal pattern), including Plastic seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device all as specified and directed.

SF in repairs Vitreous china squatting pan 'Orissa' pattern, size 580 x 440 mm white, with integral foot rests complete all as specified and directed.

S&F in repairs PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed.

S&F PVC low level flushing cistern 10 litre with complete accessories such as PVC flush pipe, over flow pipe etc. complete all as specified and directed.

S&F Vitreous China Urinal, Half stall type, white as per cat part No.4998 PRAYAG (excluding flushing cistern, flush pipe & waste pipe) complete all as specified and directed.

S&F in repairs 15mm PVC connection 450mm long with PTMT nuts of superior quality all as specified and directed.

S&F in repairs 15mm PVC connection 600mm long with PTMT nuts of superior quality all as specified and directed.

S&F bib taps brass chromium plated with crutch or butter fly handle screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs bib taps brass chromium plated with crutch or butter fly handle screwed down, screwed for 15mm bore iron pipe or for brass ferrule complete all as specified and directed.

S&F in repairs 15mm dia concealed brass angle stop valve chromium plated fancy type with long shank and cup concealed type screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F for 15 mm bore pillar tap chromium plated long neck with aerator fancy type with crutch handle screwed down high pressure with long screwed shanks and fly nuts srewed for iron pipes or for brass ferrule as per alvanize No.CON-021 of JAQUAR all as specified and directed.

S&F for 15 mm bore bib taps fancy type,chromium plated screwed down for pipes or brass ferrule as per catlouge No.CON- 037 KN of JAQUAR all as specified and directed.

S&F for angular stop cock 15 mm bore chromium plated with alvan or butterfly handle, fancy type with long shank screwed down both ends for pipes or for union as per alvanize No.CON 053 KN of JAQUAR fixed as in repairs all as specified and directed.

Supply and fixed of 15 mm pillar taps, fancy type , cast copper alloy with capston heads, CP, with scrwed down, high pressure with or without lettered hot or cold with long body, fixed in repairs complete all as specified and directed.

S&F brass stop valves chromium plated fancy type screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for union complete all as specified and directed.

S&F Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 20 mm dia bore pipes

S&F Gun metal globe or gate valve with iron wheel head screwd both ends for iron pipe and fixed for 25 mm dia bore pipes

S&F in repairs Brass CP shower rose 125mm size complete all as specified and directed.

S&F in repairs 60cm long PTMT towel rail fixed with and including chromium plated brass screws and plastic cleats (minimum weight 175g) complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall etc. with steel clamps at 2m c/c complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floor/ trenches etc. complete all as specified and directed.

Supply and fix in repairs PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or in floors of 75 mm dia internal bore

Supply and fix in repairs PVC (SWR) single socketed in any length with rubber ring joints laid in trenches or in floors of 110 mm dia internal bore

S&F 110mm dia PVC (SWR) bend with access door any radius complete all as specified and directed.

S/F PVC (SWR) bend any radius 110mm dia. Complete all as specified and directed.

S&F 110mm bore PVC SWR vent cowl complete all as specified and directed.

S&F 110mm bore PVC (SWR) branch single (single “Y”) equal or unequal complete all as specified and directed.

S&F PVC (SWR) floor trap, plain with grating including joining with solvent cement 110mm dia of outlet complete all as specified and directed.

S & F in repair for PVC (SWR) Floor trap, plain with grating incl jointing with solvent cement out let of pipe of 75mm dia complete all as specified and directed.

S & F in repair for PVC (SWR) Floor trap, plain with grating incl jointing with solvent cement out let of pipe of 110mm dia complete all as specified and directed.

S&F 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 500 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

S&F 20mm bore ball brass valve, high pressure with polyethylene high density float and fly nut complete, screwed for iron pipe complete all as specified and directed.

M & L for Ball valves suitable for 20 mm dia pipes high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm – 690 gms) as in repairs complete all as specified and directed.

S&F alvanized steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

M & L for making good of cornices architectural matching with existing alva at Rain water pipes cutting portion cutting channels, grooves exc 15cm and n.exc 30cm girth and making good by PCC 1:2:4 or Cement mortar 1:3 whatever suitable for site complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 20 mm Bore pipe complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for refixing or removal to store of 15 mm Bore pipe complete all as specified and directed.

Refixing 15mm dia old steel tubing and connections in new or old positions complete all as specified and directed.

S&f In repairs PVC connections 15mm bore of length 450mm with two brass nuts and washers complete all as specified and directed.

S&F galvanized steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

S&F galvanized steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc fixed to walls, concealed in walls/ ceilings or laid in floors etc., complete all as specified and directed.

M&L cutting into existing manholes for connecting new drains upto 150mm dia and making good to pipe & rendering, cutting out existing benching for & forming branch channel (1/2 round or ¾ section) in cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate smooth finished & reforming benching as required complete all as specified and as directed.

Demolition of PCC in any situation n. exc. 15cm thick including removal of debries outside MD land complete all as specified and directed.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not other wise specifically provided for complete all as specified and directed.

Taking down old PVC (SWR) pipes of 75/110mm dia fixed in any position complete all as specified and directed

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc, including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

one bell/buzzer point controlled by one bell push

S&F switch piano flush type 5 amps single pole one way and including taking down old u/s.

S&F socket outlet 2 in 1, 3pin 5 amps 230 volts complete all as specified and directed by Engr-in Charge

As per above items No 147 but One socket outlet three pin 15 amps control by one switch independent board with cable 2.5 sqmm size (two run) & 1.5sqmm (one run) .

S& F for modular metal flush box 2 module complete all as specified and directed by Engr-in-Charge

S& F for modular metal flush box 4 module complete all as specified and directed by Engr-in-Charge

S& F for modular metal flush box 6 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 2 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 4 module complete all as specified and directed by Engr-in-Charge

S& F for modular cover plate with frame 6 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 6 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular sockets suitable for type AC 240V, 6 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular switches suitable for type AC 240V, 16 amps 1 module complete all as specified and directed by Engr-in-Charge

S&F modular power sockets suitable for type AC 240V, 16 amps 2 module complete all as specified and directed by Engr-in-Charge

S&F modular fan regulator suitable for type AC 240V, 2 module complete all as specified and directed by Engr-in-Charge

S&F modular bell switch suitable for type AC 240V, 16 amps complete all as specified and directed by Engr-in-Charge.

S&F call bell of multi music type A/C 230 volts complete all as specified and directed by Engr-in Charge.

S&F ceiling rose , polycarbonate, isolated body with 2 to 3 terminals complete all as specified and directed by Engr-in Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Five star rated with brushless direct current motor complete all as specified and directed by Engr-in Charge.

Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engr-in Charge.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed by Engr-in Charge.

S&F lamp holder insulated body with back plate for batten fittings/angle holder as required and including taking down old damaged holder complete all as specified and directed by Engr-in Charge.

S&F of LED bulb 9 w high sutable for lamp holder complete complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 20Watts LED light fitting, basic all purpose surface and wall mounted LED batten 20Watts with aluminium housing and integrated electronic driver including 20W LED tube - 1No on surfaces of wall or ceiling including taking down the old fitting complete all as specified and as directed by the Engineer-in-Charge Make Cropton Cat No CCS-103-20-65-SL-DP-NWH or equivalent of other specified makes all as specified and as directed by the Engineer-in-Charge.

supply and fix 10 Watts environmental friendly, ultra moders, energy saving, surface mounted , decorative oval bulk head edge-lit LED luminaire comprising of high brighthess LEDs all as per Cat No CCS-103-10-65-SL-DP-NWH or equivalent of other specified makes all as specified and as directed by the Engineer-in-Charge.

Supply and fix 45 Watts Environment friendly, new generation, aesthatically, ultra modern designed Recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong/Grid ceiling all as per Cat LTCRSLM45WATT2X2 of C &S or equivalent of other specified makes fixed to ceiling including taking down the old fitting all as specified and as directed by the Engineer-in-Charge.

S&F sub main wiring complete with two runs of 4 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling etc including unsv excisting sub main wiring complete and with one run of 4 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable + one run of earth wire and one run of conduit including accessories shall be measured as one length.

S&F sub main wiring complete with two runs of 6 sqmm PVC insulated unsheathed single core multistrand copper conductor cable of 1100 volts grade drawn through new non metalic rigid PVC conduit pipe concealed in wall alongwith accessories fixed on walls/floors/ceiling etc including unsv excisting sub main wiring complete with one run of 6 sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor all as specified and directed by Engr-in-Charge. Note:- Two runs of PVC insulated cable + one run of earth wire and one run of conduit including accessories shall be measured as one length.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 430 volt 4 way MCB DB, TPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one.

S&F of MCB 415V, TPN 10 KA capacity 100 Amps complete and including taking out old u/s one

S&F MCB of SPN of rating 40 Amps B curve including taking down the old one.

S&F MCB distribution board made of CRCA sheet, powder coated paint comforming of IS 13032, double door fixed in switch boards/wall at various places of capacity 240volt 8 way MCB DB, SPN with 200 Amp rated bus bar shall conform to IP 38 protection incluidng taking down the old one.

S&F MCB of rating 240 Volts,SPN 40 Amps including taking down the old one.

S&F MCB of Single pole of rating 6 to 32 Amps C curve including taking down the old one.

S&F for modular 25 Amp motor starter switch with w module one piece including indication both red and green complete all as directed

Earthing complete with galvanised steel earth plate electrode 60cm x 60 cm x 6.3 mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15 mm bore light grade connected upto switch board incl 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No.3 of SSR Part I including dearth chamber of PCC 1:2:4 type B1 using 20mm grade aggregate with RCC cover slab 1:2:4 type B1, 40mm thick with 15mm dia MS bar 100mm C/C both ways and 6 MM dia MS hooks complete all as specified inlcuding testing on completion.

M/SJAYAM CONSTRUCTIONS

KS CONSTRUCTIONS

G.L.THIRUMALAI NAIDU AND COMPANY

DJ Group

SCION ENTERPRISES