PROVN OF OPERATION THEATRE AND PHARMACY AND CERTAIN SINGLE OFFRS ACCN AT MFVH AT KG UNDER GE 881 EWS

Amount

Total Amount of Sch 'A' Part - I (Building Works)

Total amount of Sch 'A' Part-II (Internal electrification works)

Total amount of Sch 'A' Part-III (Internal water supply works)

Total amount of Sch 'A' Part-IV (Plumbing works)

Total Amount of Sch 'A' Part- V (Site clearance works)

Total Amount of Sch 'A' Part - VI (Sewage disposal works)

Total Amount of Sch 'A' Part - VII (Area drainage works)

Total Amount of Sch 'A' Part - VIII (Road/Path Works)

Total Amount of Sch 'A' Part - IX (Protective Works)

Total Amount of Sch 'A' Part -X (External water supply works)

Total Amount of Sch 'A' Part -XI (External electric supply works)

SCHEDULE 'A' PART- XII (Misc item of work) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs. 0.00" under col of "Pre Priced rate" signifies this fact only.

(A) Internal Electrification work

LED tube light fittings retrofit batten in acrylic linear tube 20 watt, 230 V for LED tube light including 20 W LED power driver, connector block, etc complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make : Havells Cat part No LHEXBLP7PN 1W020 or equivalent make of Philips/ Bajaj.

300mm sweep 230V, AC 50 Hzs heavy duty Exhaust fan with 1400 RPM single phase with accessories, and connection from fan to connector by providing flexible copper conductor cable of size 0.75 sqmm 3 core upto ceiling rose all as specified and directed. Make : Havells Cat Part No Turbo force SP or equivalent in Crompton/Bajaj as approved.

Integral LED light luminaire comprising of epoxy power coated cast aluminium housing enclosed with glass cover with lens in frame 25W, IP 66 protection. 230 volts,50Hz including MCPCB suitable for fixing on pole & duly connected all as required at site . Make C&S or equivalent make of Bajaj/Philips.

(B) Sewage Disposal works

Construction of LLDPE septic tank designed to carry sewage and sludge, excavation in any type of soil, connections etc, conventional type complete all as shown in drgs and specified in particular specification for 05 Users

Construction of LLDPE septic tank designed to carry sewage and sludge, excavation in any type of soil, connections etc, conventional type complete all as shown in drgs and specified in particular specification for 10 Users

(C) External Water supply work

Cutting the existing 50mm tubing of size 50 to 100 mm dia and inserting new GI tee including necessary screwing threading,tail pieces,short pieces jointing material etc complete as as specified and directed by Engr-in-Charge

Brick masonary chamber (Valve pit) for opening and closing valve with internal dimensions of size 110x110x90cm build in CM 1:6 including necessary excavation and earth work in any type of soil/strata including fixing MS sheet cover 6 mm thick over angle iron frame of size 25x25x6mm with laying and locking arrangement with two coat of synthetic enamel paint over one coat of red oxide primer and 15 mm thick plaster in CM 1:4 internally, complete all as specified and directed.

(D) External Electric supply work

Construction of platform suitable for 63 KVA Transformer /Voltage stabilizer of size 2.0m x 2.0m x 0.6 m (Plateform shall be made out of brick masonary One feet below ground level and one feet above ground level hollow space and to filled by PCC 1:3:6 type C-2 , watered and well rammed with 100 mm thick cement concrete 1:2:4 type B-2 as in floor of platform, plastering in CM 1:4, complete all as specified and directed.

Voltage stabilizer outdoor type for automatic operation, three phase for unbalanced load naturally oil cooled,outdoor type & designed for input variation between 210 V to 480 V with output voltage stabilized at 415 with accuracy ± 2.5% and speed of correction 8 Volts per second and of capacity 63 KVA. Make: Electricfield/Volina/AE

LED street light Fitting 45 watt LED, IP-65 protection, single peice pressure die cast aluminium housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartment with high voltage surge protection device up to 5 KV, prewired including 1.60 mtr. Long 40mm bore light gade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts,nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified.

FRP pole mounting box wether proof type of size 155mm x 155mm x 100mm with three terminal and one 6 Amps MCB mounted inside complete all as specified and direcyed by EIC. Make: Sintex/National/Standard.

Cutting of existing bituminous road or PCC path for laying of cables GI pipes, Hume pipe culvert and similar items all as specified and directed by Engr-in-charge.

Sub total of Schedule 'A' Part-XII

Note:- The contract sum shall be arrived after deduction of amount of Sch of credit Rs 375000.00 as listed in tender Documents.

SUNIL KUMAR SANGEET KUMAR AND SONS