ADDN ALTN TO OUTER PERIMETER WALL OF COD AGRA UNDER GE (WEST) AGRA

Amount

Excavation in trenches n exc 10Sqm on plan, n exc 1.5 m deep and n. exc 1.5 m wide and getting out in any type of soil complete all as specified & as directed.

M&L for PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base and mass concrete complete all as specified & as directed.

S&F mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

S&F mild steel TMT bars 5 mm and upto 10mm dia asin stirrups, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Use & waste of form work to sides of concrete foundation and plinth beams and similar work vertical or to batter, flat, rough finished surface complete all as specified and directed.

M&L RCC (Nominal mix) 1:11/2:3 type A1 (using 20mm graded stone aggregate) as in foundation beams/plinth beam complete all as specified and directed.

M&L RCC 1:2:4, type B1 (using 20mm graded stone aggregate) as in copings,bed block and the like including weathering, slightly rounded for chamfered angles and throating including use & waste of necessary form work complete all as specified and directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 M mean radius, built in CM 1:4 complete all as specified & directed

M&L 15 mm thick plastering in cement mortor 1:4 on fair faces of brick/concrete surface of walls, surfaced finished even and fair all as specified & as directed.

M&L 15 mm thick plastering in cement mortor 1:4 on other than fair faces of brick/concrete surface of walls, surfaced finished even and fair complete all as specified and directed.

S&F in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S&F galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed

S&F concertina coil 450mm dia, number of turns 50, approx weight of coil is 6.25 kgs and coil stretch length is 4-5mtrs complete all as specified and directed

Dismantling and Re- fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

Dismantling and re-fixing galvanized, 2 strand, steel barbed wire, 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossing with and provision of galvanized MS wire staples or steel pins etc as specified. (each line wire to be measured). complete all as specified and directed

Dismantling and re-fixing concertina coil 450mm dia, number of turns 50, approx weight of coil is 6.25kgs and coil stretch length is 4-5mtrs complete all as specified and directed

M & L preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed .

M & L preparation of new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Returning , filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and directed

Removing excavated soil n.exc 50m, depositing where directed at a level n exc. 1.5 m from the starting point complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and pre-cast concrete articles complete all as specified and directed.

Demolition of cement concrete (reinforced) in roofs, floors (other than ground floors), beams, Copings, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed

M&L for brick work with sub class ‘B’ bricks old size (EXCEPT BRICKS), straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed. Note:- Old bricks retrived under item No 21 here in above shall be reused after cleaning.

M&L for PVC (SWR) pipes single socketed, in any length as in weep holes of wall complete all as specified and directed.

SHRI SAINATH ENGINEERS

MNR ASSOCIATES

M/s K S Builders

M/S JAIN CONSTRUCTION CO.

GLOBAL DEVELOPERS COMPANY

M/s Max Enterprises

SahaDevSingh Constructions