CA NO GE/ND20/202223 SPECIAL REPAIRS TO TOILETS OF C BLOCK, PROVISION OF RAINWATER HARVESTING PITS, ADDITION/ALTERATION AND SPECIAL REPAIRS IN KITCHEN IN P3 MAIN BUILDING AND PROVISION OF METALLIC WIRE MESH ON TERRACE SHIFTING AREA IN A,B AN

Amount

Taking up or down steel tubing and connections of 15mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Taking up or down steel tubing and connections of 20mm bore dia of pipe including cleaning for refixing or removal to store complete in all respect as specified

Supplying and laying of 20 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

Supplying and laying of 25 mm dia CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors including cement solvent and all fitting complete all as specified.

S & F 20 mm dia Brass Elbow

S & F 20 mm dia Brass Elbow (3/4 x 1/2)

S & F Union 16 / 20 mm

S & F 20 mm dia Brass Tee

S & F Male Brass Threaded Adaptor (MTA/ MBTA) ) 20 mm dia

S & F Female Brass Threaded Adaptor (FTA/ FBTA) 20 mm dia

S & F CPVC BALL VALVE of dia 20 mm

Dismantling 100mm/75mm dia bore cast iron soil, waste and vent pipes including fittings complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S & F 110 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash / Supreme/ Prince

S & F 75 mm dia PVC (SWR) pipes 5 mm thick (6 kg/ cm2) pressure pipe, single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed. Make:- Prakash / Supreme / Prince

S & F 110 mm PVC (SWR) bends any radius

S & F 110 mm PVC (SWR) branch piece, single (single Y) equal or unequal

S & F 110 mm PVC (SWR) junction single, (Single T) equal or unequal

S & F 110 mm PVC (SWR) Couplers

S & F 110 mm PVC (SWR) reducers

S & F 110 mm PVC (SWR) Cowl

S & F 75 mm PVC (SWR) bends any radius

S & F 75mm PVC (SWR) branch piece, single (single Y) equal or unequal

S & F 75 mm PVC (SWR) junction single, (Single T) equal or unequal

S & F 75 mm PVC (SWR) Couplers

S & F 75 mm PVC (SWR) reducers

S & F 75 mm PVC (SWR) Cowl

S&F 110 mm PVC (SWR) 'P’ trap

S&F 150mm PTMT Symet Bath assets Grating square hole/without hole fixed in position over Rain Water Pipe/nahani trap with cement slurry complete in all respect as specified and directed.

S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165 complete in all respect as specified and directed.

S&F in repairs 20mm bore gun metal globe or with iron wheel, screwed both ends for iron pipes fixed complete in all respect as specified and directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each but with shutters (without taking off the shutter from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m (without taking off shutters from the frame) all as specified.

Taking down chowkats or frames exc 1.5 sq. m but n exc 4 sq. m but with shutters (without taking off shutters from the frame complete in all respect as specified and directed.

Taking down Shutters of any description exc 1 sq. m but n exc 2 sq. m each all as specified.

S and F Solid PVC Door Frame of size 50mm x 47 mm made out of 5mm prelam PVC sheet and edges will be painted to match with prelam sheet, reinforced with MS square tube used as per specifications and drawings

Supply and fixed Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick prelam Moulded PVC Sheet on the front face 2mm thick plain PVC sheet on back face to be fixed on frame at site as per specification & drawing complete all as specified and directed.

S & F for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed..

S&F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc(with out sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauze etc size of members as specified in SSR part-I, section 8, clause 8.24(a) supplied and fitted to chowkhats all as specified and directed.

S and F 35 mm thick 2nd class H wood Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified.

S& F glazed and gauzed three track aluminium powder coated sliding window made out of Jindal extruded aluminum window classic 18mm series as mentioned below and glazed with 5 mm thick glass fixed with rubber beading/gasket and GI fly prrofing and aluminiun powder coated beading all around and lock type handle of size 75mm, including Aluminium powder coated decorative grill with 6.3mm thick aluminum section and 100X100mm openings, weighing not less than 1.75Kg/Sqm and anodized aluminium 'U' shape channel frame work alround the grill and fixed with steel screws complete all as specified and directed. (a) outer Frame with rectangular section -14035, frame bottom with section 20957 and frame top and sides with section-20958 (b) Shutter: top and side with section-20606 interlocking with section-20605 and bottom with section-20604 (to be fixed in bathroom for ventilator purpose)

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as directed

S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S & F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples

S&F 200 mm Aluminium, anodised, barrel tower bolts of extruded section

S&F 150 mm Extruded aluminium alloy handles, fabricated type., anodised

S&F Butt hinges in 100 mm Size, heavy weight, cold rolled mild steel, and fixed

Supply and fixed Floor door stopper 140mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring,

S & F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed all as specified.

S&F in repair 15mm bore dia Stainless Steel finish angular stop cock with wall flange quarter turn full Antique including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : QQT-7053 or equivalent in Kohler / Hindware

S & F in repair 15mm bore dia Stainless Steel finish 2 way Bib Cock quarter turn including cover plate complete in all respect as specified and directed by Engr-in-Charge. Make:Jaquar Code : KUB-35041 or equivalent in Kohler / Hindware

Supply and fixed in repair 15mm bore dia Stainless steel finish quarter turn central hole basin mixer round spout with popup Waste assembly with 10mm dia , 450 mm long copper pipes complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code : FLR-5169 or equivalent in Kohler / Hindware

Supply and fixed in repair 15mm bore dia Stainless steel finish concealed stop cock with adjustable flange quarter turn complete in all respect as specified and directed by Engr-in-Charge. Make:- Jaquar Code : KUB-35089 or equivalent in Kohler / Hindware

Supply and fixed CP finish CP Towel Ring Square complete in all respect as specified and directed by Engr-in-Charge. Make:-JAQUAR CAT Part No:AQN-7721 or equivalent in Kohler / Hindware

S&F in repairs chromium plated health faucet including flexible pipe 15mm bore horse connecting pipe 1.2m long with check nut and washers complete all as specified . Make : Jaquar Cat No ALD 573 or equivalent in Kohler / Hindware / PRAYAG

Supply and fixed in repairs chromium plated finish paper holder complete in all respect complete as specified and directed by Engr-in-Charge. Make : Jaquar Code : : AKB-35753 or equivalent in Kohler / Hindware

Supply and fixed in repairs 600 mm long C P finish CP Towel Bar complete in all respect as specified and directed by Engr-in-Charge. Make:- Hindware Cat. No. F840013 or equivalent in Kohler / Jaquar

S&F in repairs vitreous china wash hand basin counter top type of size 705mmX450mmx200mm in 18 mm thick granite (colour as approved) machine cut as in platforms, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 including required angles, 32mm bore dia CP waste coupling, and all required fittings complete in all respect as specified and directed MAKE : Kohler / Hindware

S & F in repairs PVC connections 15mm size with PTMT steel nuts of length 450mm complete in all respect as specified and directed

S&F in repair CP Wall mixer (wall mounted model ) 3-1 system (Code: QQT-7281) including provision for telephonic shower and overhead shower complete with 115mm long pipe connecting legs and flanges. including Hand shower (Code : HSH-1721) 105mm dia round shape multi flow with air effect (ABS body & face plate chrome plated) with rubbit cleaning system and over head shower 105mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubbit cleaning system Code (Code : OHS-1709) and with shower arm 20mm x 600mm long round shape for wall mounted shower with flange (Code : SHA479L600) or equivalent in Kohler / Hindware complete all as specified and directed by EIC

S & F PVC mirror cabinet of size 350 mm x 450 mm x150 mm with openable single looking mirror with PVC inner & outer shelves of any colour, including taking down old looking mirror & wooden cupboard mirror complete all as specified and directed MAKE : Commander /Jindal / PRAYAG

Supply and fixing in repairs PVC (SWR) floor trap for 100mm diameter of outlet, with wall thickness exc 5 mm with stainless steel grating of 100 mm including jointing with solvent cement complete all as specified and directed.

Supply and fixed peg set of 6 fixed with rawl plug Make : Prayag Cat no BEA-30 or equivalent in CERA / Hindware

S & F in repairs Hindware Cat No. F-840004 Soap Holder (Brass) with tumbler holder MAKE : Hindware Cat No. F-840004 or equivalent in Kohler / Jaquar

S&F in repairs Drapery curtain rods decorative type stainless steel 304 Grade, 25mm nominal dia and having wall thickness 1.40 mm of approved quality/make including fixing of two number decorative brackets fixed in brick/concrete wall, Two number knob on both ends of curtain rods ( The length of each curtain rod will be 1.00m to 2.50m long) complete all as directed and specified.

S & F Glass Shelf assembly Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F corner shelf 200mm size 5mm thick toughened glass MAKE : CERA / Hindware / PRAYAG

Demolition of Brickwork or stone/boulder masonry, built in Cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles

M&L for brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4. complete all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L Granite (of any type) tiles 20mm thick machine cut, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, moulding and polishing complete all as specified and directed.

M&L 20 mm thick granite (of any type) machine cut as in vertical surfaces and like, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone incl grinding and polishing laid over and including 15 mm thick rendering in CM 1:4 complete all as specified.

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises.

M & L Non skid joint less coloured ceramic tiles 7-8mm thick area of each tile exc 0.11 Sqm not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed by Engr in charge Make :- Somany or equivalent in Kajaria/Orient/Nitco

M & L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over including screeding 10 mm thick in CM 1:3 on wall complete in all respect as specified. Make :- Somany/Kajaria/Orient/Nitco

M & L Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick cement screed 1:4,complete in all respect as specified. Make :- Somany/Kajaria/Orient/Nitco

Ditto all as per above item but in skirting only ditto

Dismantling water tanks and S & F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I of capacity 1000 Ltrs Incl making connection for inlet & outlet as specified & directed Engr-in-Charge.

S & F in repairs ball brass valves high pressure with polythene float & flynut complete screwed for Iron pipe or brass ferrule of 20 mm dia and fixed specified & directed Engr-in-Charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for all as specified.

M&L Racking out of hair line cracked joints and repair/filling with crack filler silicon of Dr fixit, Fosroc, Sika or equivalent on walls complete all as per the directions of manufacturer and directed.

Taking down cement plaster on brick walls, raking out joints locking for key, scrubbing down with water etc all as specified

M&L for rendering 15 mm thick ready mix plaster (Make - Ultratech) on fair or other than fair faces of brick or concrete external surfaces of walls finished even and smooth complete all as specified and directed. (water proofing compound shall be measured and paid separately)

M&L for rendering 15 mm thick ready mix plaster (Make - Ultratech) on fair or other than fair faces of brick or concrete internal surfaces of walls finished even and smooth complete all as specified and directed. (incl new brick work)

Supply only water proofing compound liquid @ 200 ml / per 10 sqm area of plaster complete all as specified and directed.

M&L preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of Birla putty all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L 10 mm thick rendering on ceiling surfaces with ready mix plaster complete all as specified and directed.

M&L Preparation of new plastered or un-plastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of ceiling by mechanical grinder and applying three coats of white wash over a coat of primer and over incl one coat of 3 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl one coat 3 mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of Exterior Emulsion paint (APEX ULTIMA) over one coat of primer and over incl one coat of 3mm thick wall care putty all as specified and directed.

M&L preparation of old wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer.

M&L preparation of new or previously untreated surface of wood applying two coat of synthetic enamelled paint over a coat of pink primer in any approved pattern and colour, exceeding 10cm width or grith not other wise provided

M&L preparation of old steel and iron surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide.

M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide all as specified and as directed.

Demolition cement concrete(reinforced) in ground floors and upto 4 storey of any description and in any position incl MS pipes Scaffolding and making arrangements with hessian clothes for protection from falling of concrete & all other safety precautions complete all as specified and directed.

M&L for reinforced cement concrete M-25 (Design Mix) using 20 mm graded aggregate as in slab supported on walls, beams and columns in floors, roofs, landings,balconies, canopies, deck slab and in shelves and the like. complete all as specified and directed.

M&L Form work to soffits of suspended slabs as roof slabs, floor slabs, landings and similar work n.exc 200mm thick for rough finished surfaces complete all as specified.

M&L TMT bars 10mm dia and over, cut to length, bent to shape required,including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as directed by Engr-in-Charge.

Ditto as per item no above here-in-before but 6 to 8 mm dia

M & L uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) bldg

M & L Brushing neat cement slurry with 3.0 kg of cement per sq meter (For Sunken floor)

M & L 10 mm thick rendering over roof finish surface ready mix plaster even and smooth cement all as specified. (water proofing compound shall be measured and paid separately) (For Sunken floor) Note: Water proofing compound to be mixed with neat cement slurry and apply in two coats (for Sunken floor)

M&L providing cement concrete type E-2, 1:5:10 (40mm graded aggregate) in mass concrete and filling etc complete all as specified.

S & F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)including sheet cover complete all as specified. MAKE : CERA / Hindware / Jaquar

S and F in repairs PVC valveless, syphonic action type, flushing cistern of 10 lit capacity low level, white, with inlet,ball valve, float and handle including brackets with 32 mm CP Flush pipe of Low level cistern complete all as specified. MAKE : CERA / Hindware / Jaquar

S&F in repairs 15 mm dia brass chromium plated long body Bib tap fancy type with capstan head screwed down for iron pipe complete in all respect as specified. MAKE : Kohler / Hindware / Jaquar

Taking down carefully old point wiring with aluminium/ copper conductor (Light / Fan/ Socket/ power Point ) complete including fittings such as ceiling rose, pendent holders, regulators and socket point etc and making good the disturbed surface & wall/ floor complete all as specified and directed.

M&L of point wiring with PVC FRLS insulated unsheathed multi stranded copper conductor of size 1.5 Sqmm 1100 V grade including one run of PVC insulated unsheathed multi stranded copper conductor of size 1.5 sqmm as earth continuity conductor connected to common earth dolly, in and including conduits and its accessories, including replacement of factory made steel boxes suitable for modular switch/sockets including modular plates and sheets of suitable size as per site requirement for the following Note:if Cutting & chasing required shall be measured/paid under relevant items. Make:-Polycab/Havells/RR

One light/fan/exhaust fan point controlled by one nos, one way switch.

One three pin 5 Amp socket outlet point controlled by one no, one way switch on independent board

M&L for point wiring with PVC insulated unsheathed multi-stranded, single core, FRLS type, copper conductor cable of size 2.5 sqmm 1100 Volts including one run of PVC insulated unsheathed multi-stranded, single core, FRLS type, copper conductor cable of size 2.5 sqmm as earth continuity conductor connected to common earth dolly, in and including PVC concealed rigid non-metallic conduit medium grade in floor/wall and its accessories including provision of new galvanised modular concealed box with suitable back & front plate for housing the modular switches, sockets etc.

S & F in replacement of switch Modular type 230/250 volts grade, on top covers (catered in point wiring above) :-

Single pole, one way modular switch, 5 Amp rating Make:-Anchor/Indoasian/Havells

S & F in replacement of socket outlet, multipurpose type, non-shuttered, non-interlocking, Modular type, 230/250 volts grade on top covers (catered in point wiring above) :-

5 Pin 5 Amp Modular socket outlet Make:-Anchor/indoasian/Havells

S&F in replacement of ceiling rose 3 terminal / PVC/ Polycarbonate, insulated body ISI Marked.

Disconnecting mains connection and taking out old sub main wiring two run of single core 6 sq mm and one single core 4/6 sq mm aluminium conductor cable from the concealed conduit from the wall or ceiling and making good to surface.

M&L for submain wiring with PVC insulated unsheathed copper conductor multi stranded FRLS type 1100V grade 2 x 4 sqmm complete drawn in new PVC concealed conduit and its accessories along with 1x 4 sqmm PVC insulated unsheathed copper conductor multi stranded FRLS type cable for continuous earth wire and duly connected to common earth dolly all as specified and directed. Make:-RR/Polycab/Havells

Disconnecting mains connection and taking out old metal clad DB's of any type SPN with 200 amp rated bus bar.

S&F plug metal clad single pole & neutral with a 2 pin & earth plug and socket complete with MCB SP 20 Amp, 230 volts complete all as specified. Make: Standard/Havells/Indoasian

M & L for taking down of geyser of any capacity and servicing complete including replacement of thermostat,heating element,outer cover,top cover,base plate,copper tank,gun metal valve,safety nut and indicator light and refixing the same complete all as specified and directed by Engr-in-charge.

M&L for taking down of exhaust fan of any size and servicing complete, greasing, painting ,changing of ball bearing of any type,Copper rewinding and marking of MES No. etc at site and refixing complete all as directed by Engr- in -charge.

M&L Excavating over areas, n exc 1.5m deep and getting out in soft / loose soil complete all as specified and directed.

M&L Boulder filling dry, hand packed tightly of 230 mm thick with 150 to 200 mm boulder size complete all as specified and directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5m above the starting point complete all as specified and directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5m in depth and getting out in soft / loose soil complete all as specified and directed. (o to 1.5 M soft soil)

All as per Item No 126 above but for each additional 1.5m or part thereof in depth beyond the first 1.5m but getting out in mud complete all as specified and directed. (1.5 m to 3 m Mud)

Supply and laying 500 mm thick layer of sand

Supply and laying 1000 mm thick layer of boulders 40 mm dia

Supply and laying of Gravel 20 mm dia

M&L Cement concrete in surface channels and drains type C 2 (1:3:6) complete all as specified and directed.

Trial borewell of 200 mm dia upto 200 mtr deep below the ground level in any kind of soil/strata incl hard stone/boulders incl electronic logging, MS cap, MS flt iron clamp, reducing socket etc complete all as specified and directed.

Development of trial bore by reaming upto 300 mm for 100 mtr from ground level in any type of soil/strata incl hard stone and boulders etc for accommodating UPVC casing pipe (regular pipe or slotted pipe as per requirement) of 200 mm internal dia UPVC casing pipe conforming to IS-4985-2000 in 6m length of pressure rating 10Kgs/sq Cm with all necessary fittings including jointing materials all as specified and directed. make : Finolex/Reliance/Kamplast and filling the gap with pea gravels all as directed by Engg in charge including disposal of surplus soil to a distance n.exc. 50 mtr all as specified and directed.

Supply, installation and testing of UPVC pipe for Air vent-150 mm Dia (SCH-40) with all necessary fittings including jointing and jointing materials all as specified and directed.

Supply and Installation of Submersible pump, electric driven 415 V, ( Casing pipe size 200/250 mm) complete above 5 WHP upto 10 WHP inclusive of 40 metre long submersible cable and starter.

Supply, installation, testing and commissioning of LLDPE 60 mtr Pipe 150 mm(6") Dia

Note for item nos. 123 to 138 (i) The depth of drilling bore shall be upto water table and will be directed by Engr-in-charge (ii) The rates quoted in above items srl no 135 is deemed to be inclusive of all T&P equipments and labour required for execution of this item at site including transportation charge for the said T&P equipments and no extra cost shall be paid for the same. (iii). Cost of pea gravels should be included in the quoted rates

Dismantling floor, hearth or wall tiles including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F 20mm bore dia medium grade, galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and directed.

Taking down cement plaster on brick walls, raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for rendering 15 mm thick plaster in CM (1:6) on fair face of brickwork or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 600x300 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including screeding of 10 mm thick in CM 1:3 on wall with colour and pattern as decided by Engr-in-charge complete all as specified and directed.

M&L for one coat of synthetic enamelled paint in any approved pattern and colour including preparation of old decorated surfaces of wood exceeding 10cm width or grith not otherwise provided for, complete all as specified and directed.

M&L for preparing old surfaces of steel and iron work of any description not otherwise described, over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

M&L for complete removal of existing treatment from old surfaces of wall by mechanical grinder and applying two coats of oil bound distemper over a coat of primer and over incl one coat of Birla putty complete all as specified and directed.

M&L for one coat of white wash including preparation of old decorated surfaces of ceiling complete all as specified and directed.

M&L Polymer modified cementious bonding coat , prepared and applied on the concrete/ masonry surfaces with I part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight.Coverage of SBR latex-0.25Ltr / sqm for one coat complete all as specified and directed. Make of SBR emulsion/latex: Sika, Fosroc, STP,Dr Sunanada, BASF

M&L for 15 mm thick polymer modified plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and directed. (Note: SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion. Make of SBR emulsion/latex: Sika, Fosroc, STP, Dr Sunanada, BASF

M&L for brickwork with old size subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

Supply and fixed in repair 32mm bore dia CP finish copper alloy bottle trap heavy complete in all respect as specified and directed by Engr-in-Charge. Make : Jaquar Code - ALD-769B or equivalent in Kohler or Hindware.

S&F Steel rolling shutters of thickness of laths 1.25 mm, with ball bearing, safety lock of four levers incl connected items as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed.

S&F Expanded metal, cut to length, bent to shape required and fixed with frame with welding and mild steel wire not less than 0.9 mm dia or fixing with galvanized steel staples supplied and fixed complete to wood or steel members (weight n exc 4 kg per square meter) complete all as specified and directed. (Dia of MS wire, shape and size of mesh decided by engr in charge)

S&F Wire netting of stainless steel wire 1.40mm dia with mesh size 20 mm, fixed with tinned tacks of wire staples complete all as specified and directed.

S&F Framed work as in doors or gates of angle Fe-410-W (Gde E-250) quality B or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. (size of angle section decided by engr in charge)

M&L for rendering 15 mm thick plaster in CM (1:6) on fair face of brickwork or concrete surfaces complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide primer complete all as specified and as directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of 2 mm thick putty complete all as specified and directed.

SANJEEV ENTERPRISES

Ex Serviceman Enterprises

MRITUNJYA ASSOCIATES

M/S SONU ENTERPRISES

M/S MSD & Associate