Renovation of IIIC at Central Block (Room No. 104) NIT, Hamirpur (SH Civil, Electrical Network passive devices work)

Amount

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

1:1½:3 (1 Cement: 1½ coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size)

20 mm cement plaster of mix :in 1:4 (1 cement: 4 coarse sand) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing stainless steel sink (Diamond make) with Single hole of size 610x460 mm size including fixing on RCC shelves CP waste & brackets complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubularsections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDMrubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architecturaldrawings and the directions of Engineer-in-charge. (Glazing, panelingand dash fasteners to be paid for separately) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)

Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15)

Providing and fixing 4 mm (Four millimeters) thick bakalite sheet of best quality including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber /neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

With float plane/forested glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm)

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing floor spring including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screwsetc. complete : 250x16 mm, including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) over and including water thinnable priming coat with cement primer including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 15 mm dia CP brass angle cock Quarter Turn of Jaquar or its equivalent in CERA / Hindwear make /Parrywearincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing 15mm dia chromium plated brass pillar tap (heavy duty) Quarter Turn of Jaquar or its equivalent in CERA/Hindwear/ Perryware make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing G.I. Pipes (medium grade) of Jindal/Unik Make complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

15 mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 15 mm nominal bore, including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing PVC pipe 75 mm dia including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and laying bend including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and laying CP brass grating including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and laying P trap 75 mm dia including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and laying clamp 75 mm dia including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and laying socket 75 mm dia including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable of Havells/Plaza/Finolex make in surface/ recessed medium class PVC conduit as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

2 X 1.5sq. mm + 1 X 1.5 sq. mm earth wire

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

4 X 2.5 sq. mm + 2 X 2.5 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable of Havells/Plaza/Finolex make in the existing surface/recessed steel/ PVC conduit as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

3 x 2.5 sq. Mm

Supplying and fixing of 25mm size of medium class PVC conduit (ISI) along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following modular switch/ socket of Legrand-Myrius/Schneider-ZENcelo /MK-Blenze/CabtreeMurano /Indo asian make on the existing modular plate & switch box including connections but excluding modular plate etc. as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

5/6 amps switch

3 pin 5/6 amp socket outlet

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following size/ modules, GI box along with as required.modular base & cover plate for modular switches in recess etc. including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

8 Module (125mmX125mm)

Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

8 Module

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 A & 15/16 A modular socket outlet and15/16 A modular switch, connections etc. as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V,8 way (4 + 24), Double door, onsurface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts,C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required of Legrand-DX3/Schneider-Acti9/Siemens-Betagard/Hager make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Single pole

Supplying and fixing following rating, four pole, 415 V, 63 Amps isolator in the existing MCB DB complete with connections, testing and commissioning etc as required of Legrand-DX3/Schneider-Acti9/Siemens-Betagard/Hager make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing following rating, Double pole, 230 volts, 40 Amps, EL+MCB with overload protection (RCBO), having a sensitivity current upto 300 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc of Legrand make. as required and directed by Engineer-in-Charge of Legrand-DX3/Schneider-Acti9/Siemens-Betagard /Hager make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Realignment of existing lights and Ceiling fans compete as required at site including connectios ,dismentalling and reinstallation welding fan hooks if any as required in newly created cabins aginst this project including cost of material including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying and fixing MCCB 100 Amps rating 36 KA, 4 pole 550 volt 50 HZ of Legrand make with megnato thermal release i/c drilling holes on the board connections earthing the body as required with two sets of spreaders including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing, installation testing & commissioning of Rack and other components RACK19'' 6 U wall mounting cabinets complete in all respect including standard accessories :1U Cable Manager (1), Hardware Packet (1 Pkt) 4 Socket 5 Amp. Power Distribution Unit (1 No) Roof Mounted Fan Unit (1 No) , of Panduit (Pannet)/ Systimax/Rackom/ D-Link/ iball/mass/ Com-Rack make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing, installation testing & commissioning of Cat 6 UTP patch panel fully loaded complete in all respect of D-Linkl/Panduit (Pannet)/ Systimax/Com-rack/rackom make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing, fixing, testing and commissioning of CAT 6, UTP LAN cable of Molex/ Schneider/ Amp/ D- Link/Legrand make in the exiting PVC/ steel conduit as required along punching & numbering both ends (patch pannels switch side and IO port Side) of cable with testing including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing and fixing of 25mm dia PVC/ Steel conduit (ISI Mark) along with the accessories in surface/ recess including painting in case of surface conduit or cutting the wall and making good in the same in case of recessed conduit as required including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Providing, installation testing and commissioning of CAT 6 Information outlet complete in all respect including British/American style face plate and Surface mount Box back of Molex/ Schneider/ Amp/ D- Link/Legrand make in the exiting PVC/ steel conduit with punching & numbering both ends (patch pannels switch side and IO port Side) as required along with testing including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

Supplying,installation testing & commissionig of Cat 6 UTP Patch cord 1 Mtr of D-Link /Panduit (Pannet)/molex/ Legrand make including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals.

RITESH SOOD

Himachal Techno Engineers