Provision of Additional Facilities to Destitute and Rehablitation Centre at Toovipuram Thoothukudi

Amount

Dismantling Brick Work using deploying machineries and labour charges and all incidential charges such as water , curing etc., complete as per standard specifications

Dismantling RCC using deploying machineries and labour charges and all incidential charges such as water , curing etc., complete as per standard specifications

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one cement four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38

Vertical Shuttering

Column Shuttering

Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors.

Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 3500 Kg/ 10cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS staandards. (No separate payment will be made by the Department for the excess usage of materials)

Brick work in CM 1:5 (one cement & five sand) using Country bricks of size 83/4"x41/4"x23/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Finishing the top of floor with Granolithic Finish with CC 1: 2: 4 (one cement, two M-Sand & four HBG jelly) using chips of grade 10 mm and below for 25mm thickness and rubbed smooth etc, complete as per standard specification

Plastering with cement mortar (1:4) 20mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Colour washing Two coats with freshly burnt shell lime in all floors using best quality and approved vareity of colour pigments including cost of `materials brushes scaffolding charges etc.complete complying with standard specification(stainer and colour solution not be used) S.I.336

Painting two coats with ready mixed Exterior Emulsion Paint approved quality and colour including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m S.No 358

Supplying and fixing in position Cement based hydrualically pressed Anti-Skid tiles (Eurcon pattern design) 20 mmthick in cement mortar 1:3 - 20mm thick & pointed with same colour of cement etc., complete as per standard specification

Supplying & Fabrication & Placing in position of RCC pre cast slab of 10cm (4”) the including all cost using double matt reinforcements

Supply and delivery of Solid Core Flush Shutters with teakply on both side with teakwook lipping alround 35mm thick, Labour wrought and put up in position Shutters for fully panelled doors internal five plywood panels including labour charges for fixing furniture fittings complying with standard drawings and standard specification and Labour charges for fixing doors alongwith frames in position etc., complet

Electrical Arrangement

Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (6 points per coil) SD-20

Supply and fixing of single box type 4'40 W fluorescent fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed FRLS copper leads from terminals to the fitting

Supply and fixing of 1200mm (48") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mm down rod on the existing clamp

Supply and fixing of 5Amps 3 pin and 2 pin combined modular type switch conscealed in manufacturer's GI mounting box in flush with wall..SD-134

Supply and fixing of 5A / 15A 3pin combined flush type wall socket with 15A flush type switch concealed in suitable MS box in flush with wall with painting .SD 137

supply and fixing of 30W LED street light fitting with LED (Lower end) with 25mm dia. GI pipe (class B) with 1 no.25mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting. SD 447

Wiring with 2x1.5sq.mm PVC insulated SC unsheathed FRLS copper conductor of 1100V grade insuitable PVC rigid pipe on wall and ceiling with PVC accessories with 150x100x113mm TW switch box for 5A 3pin non interlocking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5sq.mm copper wire for open PVC plug point SD 36

Wiring with 2x1.5sq.mm. PVC insulated unsheathed FRLS SC copper conductor of 1100V grade insuitable PVC rigid pipe concealed in wall and ceiling with PVC accessoires with TW switch box and 5A FT switch in flush with wall with 3mm thick hylum sheet cover for making good of the concealed portion with suitable colour for PVC concealed light point / fan point (for electronic regulator) SD 24

Supply and fixingof TNEB meter board suitable for 32A three phase service connection with 3Nos. 32A fuse unit (500V) 32 A neutral link and earth link (1"x1/8" copper flat)on TW plank of size 600mm x 450mm x 19mm with supporting TW reepers of 1" thick an either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit with 1 No 40 Amp 30 MA Four Pole RCD / RCCB (Lower End) with suitable necessary connection

Supply and fixing of 300mm (12") sweep (light duty) AC exhaust fan complete with necessary wall opening and making good of the wall SD 114

Supply and fixing of 1.5 sq.mm Copper cable including all charges etc., complete

Supply and fixing of 15 W LED Light including all charges etc., complete

Supply and fixing of 32 A Fuse Unit including all charges etc., complete

Plumbing Arrangements

Europeon Water Closet with all fittings and 10lit capacity flusing tank

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm white glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone M.Sandcushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone M.Sandand Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to CI soil pipes (including the cost of 100mm dia CI pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing PVC Rain water down fall pipes of following dia meter etc., complete.

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supplying laying and jointing PVC Pipe below ground level (Internal)

Letout Waste Pipe 110mm

Waste Water 65mm

Water In 25mm

Supplying laying and jointing PVC Pipe Above ground level (Internal)

Letout Waste Pipe 110mm

Waste Water 65mm

Water In 25mm

Water In 25mm

Cost and Supply of 1.5 HP Centrifugal Pump including all charges etc., complete

Cost and Supply of 500 Litre HDPE Tank including all charges etc., complete

Cost and Supply of S.S Wah Basin including all charges etc., complete

Supplying laying and jointing PVC specials etc., complete

110mm dia PVC Plain Bend

110mm dia PVC Plain Tee

75mm dia PVC plain Bend

75mm dia PVC Door Bend

75mm dia PVC Plain Tee

25mm dia Gate valve

25mm dia PVC Tap

25mm dia PVC plain coupler

25mm dia PVC plain Bend

25mm dia PVC Plain Tee

Aluminium Works

Supplying, fabricating and fixing in position of Aluminium anodised natural colour matt finish door with shutter 2/3rd plain glass of 5.5mm thick 1/3rd both side prelaminated with Alu. Grill (two leaves) With floor spring

Windows

Mild Steel Works

Supplying and fabricating and fixing MS grill works to windows and grill gate using necessary MS flst for inner and outer members should be fixed to window frames

Supplying and fixing colour galvalume sheet roof of 0.47mm thickand steel tubular box section of 100x50x3mm of 1meter interval including priming coat fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

AAC Block Works

Room Partitions: Creating additional rooms through partitions and Toilet Side Wall for ensure security by using AAC Blocks.

Painting two coats with ready mixed Interior Plastic Emulsion Paint approved quality and colour with Primer for Plastic Emulsion Paint, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m S.No 358

Terracotta Jally Works

Compound Wall Height Extension: Extending the compound wall height to ensure security and privacy for residents by using CLAY JOLLY. Supply and fixing of Clay Jolly by using Cement paste and Painted by Terra-Cotta Finishing. Terracota Jally of size 20 x 20 x 0.75mm

Stainless Steel Works

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete (PWD SOR - M-0651)

Additional Painting Works

Painting two Coat with Emulsion Paint over the All Surfaces of Building by approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Painting Two Coat with Ready Mixed Enamel Paint over the Old Iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.

Debris Works

Debris and Bushes Cleaning work around the Building and Dismantling old structure near septic tank.

Dismantling of Plain Cement Concrete including all charges etc., complete (Building Surrounding)

Bunds Removal and Cleaning Sites

Bushes Cleaning Area

Cuddappah Stone Works

Brick work in CM 1:5 (one cement & five M-Sand) using Country bricks of size 83/4"x41/4"x23/4"including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar (1:4) 20mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306)

Painting two coats with ready mixed Interior Plastic Emulsion Paint approved quality and colour with Primer for Plastic Emulsion Paint, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m S.No 358

Supply and fixing of Kadappa slab for Dining Area including All charges

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

IJ Constructions (BID ID -1183222)