CE/TP1-088/2022-23

Amount

Removing of existing metal jelly of size 20 mm having a average thickness of 50mm and stacking in the shape of tapezoidal prism on an almost plane and firm ground and height of prism not less than 1.00m and side slope of stack not to be flatter than 1.5:1 with proper drianage on all sides including cost of all labour, lead, lift and all head load, levelling the top surface etc., complete.

Dismantling of existing structure plinths in RCC at proposed area above / below ground level as identified by engineer at site at 110 KV vadagathipatty SS and disposing it with an initial lead of 10m,lift etc., complete.

Earth work excavation for foundation in all soils and sub-soils to full depth inclusive of shoring shuttering and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. In Hard gravelly soil

Earth work excavation for foundation in all soils and sub-soils to full depth inclusive of shoring shuttering and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.In soft distengrated rock not requiring blasting

Earth work excavation for foundation in all soils and sub-soils to full depth inclusive of shoring shuttering and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. In medium rock and dense medioum rock not requiring blasting

Earth work excavation for foundation in all soils and sub-soils to full depth and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification. Hard rock requires wedging & chessling

Providing anti- termite protection treatment (Pre-Construction) for the Foundation and flooring of control room extension portion by drilling holes of 150mm depth at 300mm C/C and filling the holes with anti termite liquid and refilling the holes with earth compacted by plate compaction as per IS 6313(Part-II) including cost of all materials, Labour charges, Lead, Lift, T&Ps ,Charges for plate compaction etc., complete .

M.Sand filling for Foundation of control room extension portion including cost of sand, filling charges, labour for watering and consolidation leads and lift etc., complete.

PCC 1:3:6 using 40mm size HBGS metal, without formwork for Plinth foundation , control room extension portion foundation ,Fire Barrier wall foundation including cost of cement (of approved brand), labour charges, curing, consolidation, all lead, lift, loading and unloading charges etc. complete. (Without form work)

PCC 1:2:4 using 12 to 20 mm HBGS metal for Plinth foundation without form work including cost of cement (of approved brand), labour charges, curing, consolidation, all lead, lift, loading and unloading charges etc. complete. (Without form work)

PCC 1:2:4 using 12 to 20 mm HBGS metal for Plinth foundation with form work including cost of cement (of approved brand), labour charges, curing, consolidation, all lead, lift, loading and unloading charges etc. complete. (With form work)

Supply and filling the basement in layers with gravel with a lead of 10 Kms for proposed yard area, well rammed including filling charges as per standard specification (watering & consolidation) with all leads, lifts as per standard specification etc., complete.

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Fire barrier wall Foundation, Control room extension portion Foundation and Floor / Plinth Beam of Fire barrier wall with form work as directed by the Engineer in charge including cost of all materials, labour charges, vibrating charges, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement.

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Columns of Fire barrier wall and Control room extension portion with form work as directed by the Engineer in charge including cost of all materials, labour charges, vibrating charges, curing, scaffolding , all T&P, lead, lift etc., complete. but excluding cost of steel reinforcement . (Below Ground level)

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Columns of Fire barrier wall and Control room extension portion with form work as directed by the Engineer in charge including cost of all materials, labour charges, vibrating charges, curing, scaffolding , all T&P, lead, lift etc., complete. but excluding cost of steel reinforcement . (From above Ground level to (+)3.5m level)

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Columns of Fire barrier wall and Control room extension portion with form work as directed by the Engineer in charge including cost of all materials, labour charges, vibrating charges, curing,scaffolding, all T&P, lead, lift etc., complete. but excluding cost of steel reinforcement . (From above (+)3.5m level to (+) 8.00m)

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for roof slab, sunshades in Control room extension portion with form work as directed by the Engineer in charge including cost of all materials, centering, Shuttering,scaffolding, labour charges, vibrating charges, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Roof beam, sill beam, lintels of Fire barrier wall and Control room extension portion as directed by the Engineer in charge including cost of all materials, centering, Shuttering, scaffolding, labour charges, vibrating charges, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. (From above Ground level to (+) 3.5.00m)

RCC 1:1.5:3 using 12mm to 20mm HBGS metal for Roof beam, sill beam, lintels of Fire barrier wall and Control room extension portion as directed by the Engineer in charge including cost of all materials,centering,Shuttering,scaffolding, labour charges, vibrating charges, curing , all T&P, lead, lift etc., complete but excluding cost of steel reinforcement. ( From above (+)3.5m level to (+) 8.00m )

Labour charges for Refilling with excavated earth well -watered and consolidated in layers of not more than 150mm thick in foundation and basement of control room extension as directed by the Engineer in charge including all Labour charges, Lead, Lift, T&Ps etc., complete.

Brick work in CM 1:5 using chamber burnt Class II clay bricks of size 9”x 41/2”x3’’ for super structure of building and fire barrier wall as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, Lead, Lift, T&P etc., complete. ( Up to Ground level of yard and Control room extension)

Brick work in CM 1:5 using chamber burnt Class II clay bricks of size 9”x 41/2”x3’’ for super structure of building and fire barrier wall as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, Lead, Lift, T&P etc., complete. ( From Ground Floor to (+) 3.5 m level )

Brick work in CM 1:5 using chamber burnt Class II clay bricks of size 9”x 41/2”x3’’ for super structure of building and fire barrier wall as directed by the Engineer in charge including cost of all materials, scaffolding, labour charges, curing, Lead, Lift, T&P etc., complete. ( From (+) 3.5m Level to (+) 8.00m)

Supplying and fixing the MS Angles inside the cable duct including cost of all mateirals lead,labour, lift etc, complete as directed by the Engineer-in-charge at site.

Supply and fixing of 90 lbs rails for transformer plinth including cost of material, lead, labour, lift etc, complete as directed by the Engineer-in-charge at site.

Supplying and fabricating and placing in position of MS/RTS steel reinforcement of SAIL or equivalent brand as approved by engineer at site for RCC works including labour for cutting, bending, tying and fixing in position as per specification including cost of all materials, lead, lift,labour, cost of binding wire, etc., complete.

RCC 1:1.5:3 mix using 12mm to 20mm HBG metal (machine crushed) for precast slab with form work including cost of cement, all materials , labour, lead, lift, curing ,consolidation using vibrators, hire charges for T&P etc complete but excluding cost of steel reinforcement as directed by the Engineer-in-charge at site.

Labour for Transporting, laying and fixing of RCC cover slab for Cable duct including cost of all labour, lead, lift etc., complete.etc., complete.

Fabrication of Template and assembling in correct position for various equipment plinth and grouting the foundation bolts including cost of all materials, labour, lead, lift etc. complete.as directed by the dept. Engineer at site.

Fabrication and supply of foundation bolts of 25mm dia (1.2m length) and other various sizes and lenghts as instructed by engineer at site including providing cleat at bottom and threading at top and galvanizing the top of bolt including Double Nut and Washer including cost of all materials, labour lead lift etc., complete.s as directed by the Engineer incharge at site.

Supplying and fixing chicken mesh 10mmx10mm of 20G over junction of Brick work with reinforced concrete columns, beams etc., Mesh shall have a minimum lap of 75mm on either side of the joint, and shall be fixed to brick work/concrete before plastering as directed by the Engineer in charge including cost of all materials, labour charges, curing, Lead, Lift, T&P etc., complete

Plastering in CM 1:3, 10mm thick all ceiling surfaces, Sunshades, Lofts, bottom of waist slab etc., including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Plastering in CM 1:5, 12mm thick for exterior surfaces of all walls of Fire barrior wall, structure plinths, transformer plinths and cable duct wall including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Plastering in CM 1:5, 20mm thick in two layers for exterior surfaces of all walls of control room extension including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete

Plastering in CM 1:5, 12 mm thick for interior surfaces of all walls of control room extension and cable duct wall including cost of all materials, scaffolding charges, Labour charges, curing, Lead, Lift, T&P etc., complete.

Providing floor finish with vitrified tiles of size 600 x 600 x 8 mm of approved make, colour and pattern over 10mm thick Cement mortar 1:3 bedding and pointing with same coloured cement in all floors as directed by the Enginer incharge at site including cutting chase in walls wherever required, cost of all materials labour charges lead, lift, curing T&P etc., complete. - 10M²

Skirting with vitrified tiles of approved make, colour, pattern, quality with 8mm thick over 10mm thick Cement mortar 1:3 bedding for 150mm height and pointing with same coloured cement in all floors for cutting chase in walls wherever required as directed by the Enginer incharge at site including cost of all materials labour charges lead, lift, curing T&P and etc., complete.

Providing and fixing in position Anodized Aluminum frame with powder coating glazed sliding window/UPVC window of required size as per specification and drawing as detailed below including cost for chipping the existing wall, finishing it after fixing the window in position, including cost of all materials including rubber beeding,aluminum beeding etc., labour charges, leads and lifts etc complete. i) Vertical Post - Anodized Aluminum section 63x38mm of thickness 2.45mm with country wood filled at maximum spacing of 600mm c/c ii) Horizontals - Anodized Aluminum section 63x38mm of thickness 2.45mm with country wood filled at maximum spacing of 750mm c/c iii) 5.5mm thick pin head Glass. iv) Aluminum cleat angle of weight not less than 0.12Kg/m on both sides of frame.

Supplying & fixing Aluminum grills of approved design for windows using 20x12mm Aluminum flats and middle portion16mm grill including cost of all materials and labour charges for cutting, welding and fabrication charges, cost of consumable such as gas, electrodes screws, fixing and transporting, lead, lift, etc. complete

White washing two coats using white cement including cost of all materials, lead, lift etc, complete.

Colour washing Inside building with two coats of Acrylic Emulsion (First quality - Apex or its equivalent) over a coat of water based primer with applying two coats of Wall Putty paste of approved quality over the priming coat one coat by one coat and making the interior walls smootheing by scrapping with nice sand paper for interior surfaces as directed by the engineer at site including cost of all materials such as Oil bound distemper, Wall Putty paste, Primer and scaffolding, water charges,Labour, Lead, Lift etc., complete.

colour washing Outside building with two coats using ready mixed Weather Proof Exterior Emulsion (First quality - Apex or its equivalent) of approved quality and colour over a coat of exterior emulsion water based primer exterior surfaces including through scrapping, clean removal of dirt, cost of all materials, scaffolding,water charges, Labour, Lead, Lift etc., complete.

Supplying and spreading of stone dust to finished thickness of 10 cm including cost of all materials, lead, lift, watering and levelling surface etc., complete.

Providing one course of best pressed tiles of size 230x230x20mm as weathering course for roof slab embedded in 12mm thick Cement mortar 1:3 mixed with crude oil @ 10% by weight of cement over a bed of brick jelly in pure slacked lime in the ratio of 32:12.5 (32 parts of Brick jelly to 12.5 part of lime) to an average thickness of 80mm laid with required slope well beaten with wooden mallet and pointed with the same oiled mortar including cost of all materials, Labour, Lead, Lift etc., complete

Supply and laying of 110mm (4Kg/M2) dia PVC pipe of FINOLEX or equivalent approved make and quality with ISI monogram as directed by the Engineer in charge for Downfall Pipes as directed by the Engineer in charge including cost of all materials, all specials such as Tees, Elbow, shoes, Special clamps, bends and screws, gratings etc., making holes in masonry/concrete, restoring the disturbed area to original condition, making water tight jointing with no leakage, Labour, scaffolding, Lead, Lift etc., complete.

Providing plinth protection flooring alround the building for a width of 1m from the face of the basement wall by laying PCC 1:3:6 using 20mm HBG metal for an average thickness of 100mm and Flooring over with CM 1:3 and the finished surface is to have a slope away from the plinth to drain water from down fall pipes with slope towards rain water harvesting structure as directed by the Engineer in charge including cost of all materials, labour charges, curing, lead, lift etc., complete.

Spreading of existing stacked metal jelly inside the 110 KV and 33 KV yard having size 20 mm to a thickness of 5 cm including cost of all materials lead, lift watering and levelling surface etc., complete.

Supplying and spreading of metal jelly of 20 mm to finished thickness of 5 cm including cost of all materials, lead, lift watering and levelling surface etc., complete.

Providing and fixing the pvc pipes using couplers and bends, earth work and refilling and leak testing of fixed pipes including cost of all materials, labour, lead, lift etc. complete. ( 20 mm dia pipe )

Providing and fixing the pvc pipes using couplers and bends, earth work and refilling and leak testing of fixed pipes including cost of all materials, labour, lead, lift etc. complete. ( 12 mm dia pipe )

Supplying and fixing of 12mm bib cock including cost of all materials, labour, lead, lift etc. complete.

Supplying and fixing of Gun metal gate valve including cost of all materials, labour, lead, lift etc. complete.

Dismantling of windows in brick wall of existing Control room building including removal of frames, hinges, shutters, fastenings and iron work and disposing it with an initial lead of 50 m away from site including cost of labour, T & P, lead, lift and all head load and disposing it as instructed by engineer at site, complete

Dismantling of brick wall of existing Control room building for making passage to new control room extension and disposing it with an initial lead of 50 m away from site including cost of labour, T & P, lead, lift and all head load and disposing it as instructed by engineer at site, complete

Wiring with 2X4sqmm PVCC insulated unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with 150X100X113mm Metal box with paint 3mm thick hylum sheet cover for 5 Amps 3 pin non interlocking flush type CS plug with continuous earth wire connection of 4 Sq.mm multistand wire and making good of the concealed portion with suitable colour for concealed PVC plug point including cost of all materials such as cables, pipes, etc. complete. (Wiring shall extend from existing control room)

Supplying and run of 4 of 6 Sqmm (84/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earthing for providing 6 Sq.mm multistand PVC wireand making good of the concealed portion with suitable colour including cost of all materials such as cables, pipes, etc, complete.

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton Greaves/Equivalent)) suitable for LED lamp with 9W bulb including cost of all materials such as cables, pipes, etc, complete.

Supply and fixing of single box type 4'x19W LED flu fitting complete with copper choke and condensor (Philips / Crompton / Wipro/Equivalent) with TW round blocks on wall or ceiling with flu tube with PVC unsheathed copper leads from terminals to the including cost of all materials such as cables, pipes, etc, complete.

Supply and fixing of 1200mm (48’) AC ceiling fan confirming to IS 374 /1979 complete with stepped electronic regulator with 1 meter down rod on the existing clamp as brand approved by engineer at site, including cost of all materials such as cables, pipes, etc, complete - 1 No.

Supply of RSJ 200X100 as per latest IS.

Supply of Chequrred Plate 6mm as per latest IS.

Supply of MSC 125X65 as per latest IS.

Supply of MSC 100X50 as per latest IS.

Supply of MSA 100X100X8 as per latest IS.

Supply of MSF 65X10 as per latest IS.

Supply of MSR 40 mm as per latest IS.

Supply of MSA 50X50X6 as per latest IS.

Supply of MSF 50X8 as per latest IS.

Supply of MSR 20 mm as per latest IS.

Loading, Unloading and Transporting 180Kms., average

Manufacturing and supply of bolt of required length of 18 - 20 mm dia GI rod including cost of GI rod and 2Nos. GI nuts & washer as directed by the field Engineer. Grout bolt & Eye bolt.

Supply and provision of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Fabrication, supply and fixing of equipment board of various size & fire stand & etc, as per drawing and as directed by the Executive Engineer, including cost of all materials.

Manufacturing and supply & fixing of LC / Key board out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos. plain glass of 5 mm thick fixed with metal roller moving on Alu. channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and clossing wall clamp made out of 6mm plate should be provided on as per drawing and as directed by the field Engineer including cost of all materials.

Manufacturing & supply of fire bucket of 10 lit capacity made out of 26Swg (0.46 mm) M.S.Sheet painted with white & red namal paint in side & out side respectively bottom of bucket shall be 'U' shapped out side of the bucket shall be written as Fire in English / Tamil in white enamal paint including cost of all materials.

Fabrication supply & fitting of CT / PT junction box out of 14 SWG (2mm) M.S.Sheet wherever required as directed by the field Engineer. The box shall be vermin proof shall have sturday hinges, provision for mounting terminal blocks and locking arrangements including cost of all materials. 400W X 150D X 300H

Fabrication, supply and fixing of AC distribution box of size 750W x 250D x 750 H mm out of 14SWG (2mm) M.S.Sheet wherever necessary as directed by the field Engineer. The box shall be vermin proof shall have sturdy hinges, provision for mounting MCB and MCCB detachable gland plate and locking arrangements including cost of all materials.

Manufacturing & supply of yard light box of size 200W x 200H x 150D mm out of 18SWG (1.2mm) M.S.Sheet with cable entry holes, fixing arrangements for fuse units and mounting clamps as directed by the field Engineer including cost of all materials.

Labour charges for removing rust, primer coat, first & second coat painting both sides & in M.S.board R.S.Joist & Yard light pole etc., including cost of enamel paint (Dulex, Asian, Berger preferred) and other consumables directed by the field Engineer.

Supply and Erection of LED lamp 72W fitting with fixture and fuse box including wirng and testing for burning condition; including the cost of 15 amps 2Way strip connector and other consumable.

Labour charges for writing details in Finished Surface boards including cost of enamal paint (Dulex, Asian, Berger preferred) and other Consumables as directed by the field Engineer.

Labour charges for drawing layout and writing details in LC / Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer.

Supply and erection of 40mm dia, `B` Class GI pipe for extension of tandum / down pipe for AB Switches and for any other work as required by and as directed by field Engineer including cost of GI Pipe.

Supply & fixing of 16Amps, ISI mark bakelite HRC / rewireable fuse holder in panels / boxes for AC / DC / PT circuits wherever required as directed by the field Engineer.

Supply & fixing of 32Amps, ISI mark bakelite HRC / rewireable fuse holder in panels / boxes for AC / DC / PT circuits wherever required as directed by the field Engineer.

Supply & fixing of 63Amps, ISI mark bakelite HRC / rewireable fuse holder in panels / boxes for AC / DC / PT circuits wherever required as directed by the field Engineer.

Supply & fixing of 2/5/10Amps, ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC / DC / PT Circuits wherever required as directed by the field Engineer.

Supply & fixing of 32Amps, ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC / DC / PT Circuits wherever required as directed by the field Engineer.

Supply & fixing of 63Amps, ISI mark HRC Fuse without holder of reputed make in panels / boxes for AC / DC / PT Circuits wherever required as directed by the field Engineer.

Supply & fixing of 15Amps, ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the Field Engineer.

Supply & fixing of 32Amps, ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the Field Engineer.

Supply & fixing of 200Amps, ISI mark porcelain rewirable fuse unit of reputed make in panels, boxes for AC Circuits wherever required as directed by the Field Engineer.

Supply and fixing of wooden board 25mm / Hylam sheet 10mm thick for fixing fuse units wherever required As directed by the field Engineer.

Supply & fixing of 3 Pole 63 Amps, ISI make MCB (AC) in panels / Boxes of reputed make as directed by the field Engineer.

Supply and fixing of AC 3 Phase 4 pole 415V, 200 Amps ISI mark change over switch of reputed make as required and directed by the field Engineer.

Suply & fixing of mounting channel suitable for CBTM 5 terminal block in pannel / box as required and as directed by the field Engineer.

Supply and fixing of disconnected type terminal block suitable for CT Circuits in panels / box as required & as directed by the field Engineer.

Supply and glanding of 19mm, ISI mark cable glands of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer.

Supply and glanding of 25mm, ISI mark cable glands of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer.

Supply and glanding of 28mm, ISI mark cable glands of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer.

Supply and glanding of 32mm, ISI mark cable glands of reputed make including removing insulation of cable and providing suitable holes as directed by the field Engineer.

Supply and termination of cable core end including cost of cable socket, lug, ferrules, strap etc, as per cable schedule and as directed by the field Engineer.

Supply & fixing of (Godrej) 6 lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply and providing of 600mm mean dia, 300mm height 36mm thick cement coller for identification of earth electrode location including 1primer and 2 coats of colour wash as directed by field Engineer.

Manufacturing & supply of sand drum made out of oil drum of size 580 mm dia and 420 mm height with conical cover made out of tin sheet provided with handle including cost of barrel, sand and consumables as directed by the field Engineer.

Supply and fixing of flexible copper tape / rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer.

Supply & Provision of 2.5 Sq. mm multi stand / single core flexible Finolex / Indo Cable for Panel wiring work / for any other purpose as directed by the field Engineer.

Supply & fixing of 2Pole 32Amps, ISI make DC MCB in panels / Boxes of reputed make as directed by the field Engineer.

Supply of 8.0M long stepped tubular pole for yard light as per drawing and primer coat and as directed by the Dept. Engineer at site.

Labour, machineries, consumables for fabrication of Heavy Section without length wise welded joints (Sectional weight 14kg / m and above)

Labour, machineries, consumables for fabrication of Light Section with joints wherever necessary (Sectional weight below 14kg/m)

Painting for Labour for rust removing, leaning painting of first primer coat (Red - Oxide paint) of all sections including cost of paint, brush and consumables.

Removing, cleaning painting (Aluminium) of first finishing coat of all sections including cost of paint, brush and consumables.

Labour for painting (Aluminium) of second finishing coat of all sections including cost of paint, brush and consumables. Works carrying out on Line Clear condition

Labour charges for structure erection Heavy section (Sectional weight 14kg / m and above) Works carrying out on Line Clear condition

Labour charges for structure erection Light section (Sectional weight below 14kg/m) Works carrying out on Line Clear condition

Labour for erection of SF6 Circuit Breaker 110KV, with own crane arrangement and connecting link rod, SF6 Gas filling and other consumables and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for erection of VCB / SF6 CB 33KV, with own crane arrangement and connecting link rod, SF6 Gas filling and other consumables and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for erection of 110KV CT (One Single Phase unit), with own crane arrangement including providing holes whereever required, fixing junction box and other consumables and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for erection of 33KV CT (one S. Ph or 3Ph unit) including providing holes whereever required, fixing junction box and other consumables and as directed by the field Engineer Works carrying out on Line Clear condition. Using manual labour or crane own arrangement

Labour for erection of CT junction box including fabrication of clamp 110kV

33KV / 433V distribution transformer with own crane arrangement. Works carrying out on Line Clear condition

Labour for erection of AB Switches, without earth, hand operated 110KV including cost of lubricant, consumable and wiring (if necessary) allignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for erection of 33KV AB Switches, including cost of lubricant, consumable and wiring (if necessary) allignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for erection of Station type 110KV LAS, single stage or multi stage including fabrication of base if required.

Labour for erection of Station type 33KV LAS, single stage or multi stage including fabrication of base if required.

Labour for erection of 110KV single pole stack up right, under hang or suspension. Works carrying out on Line Clear condition.

Labour for erection of 33KV single pole stack up right, under hang or suspension. Works carrying out on Line Clear condition.

Labour for stringing of strung bus including hoisting of insulators Works carrying out on Line Clear condition. 110KV Single Zebra conductor (1 span 3 runs)

Labour for stringing of 33KV Single Zebra conductor (1 span 3 runs) strung bus including hoisting of insulators Works carrying out on Line Clear condition.

Labour charges for erection of bus bar Using 75 mm IPS Aluminium tube with making required bends, including fabrication and any modification of end clamp wherever necessary and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour charges for erection of bus bar Using 75 mm IPS Aluminium tube without making required bends, including fabrication and any modification of end clamp wherever necessary and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour charges for erection of bus bar Using 50 mm IPS Aluminium tube without making required bends including fabrication and any modification of end clamp wherever necessary and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for providing Droppers and jumpers. Works carrying out on Line Clear condition

Labour for erection of HG fuse 3 pole set 33KV. Works carrying out on Line Clear condition

Labour charges machineries, consumables for fabrication of earth electrode 10Mtr. length or as directed by the field Engineer.

Labour charges machineries, consumables for fabrication and erection of earth spikes. Works carrying out on Line Clear condition

Labour machineries, consumables for erection of earth mat and earth raisers, as directed by the field Engineer at site.

Providing 140 / 150mm dia bore including, labour, lead, lift, etc., complete mobilization in all types of soil and erection of earth electrode, supply and providing A4 Grade bentonite powder with 5% common salt mixed with available site clay soil with water 5 Kg / m depth in earth bore and pouring water and tightening of earth bore, upto satisfactory earth. Works carrying out on Line Clear condition

Labour for erection of panel / battery charger Simplex indoor / Out doors / MOM / BMB

Labour for In duct / trunch including the cost of Aluminium tag for identification. Upto 8 Core

Labour for In duct / trunch including the cost of Aluminium tag for identification. Above 8 Core

Labour for laying of cable and clamping in structure. Upto 8 Core

Labour for laying of cable and clamping in structure. Above 8 Core

Labour for provision of cable end gland

Labour for providing Cable Core End termination.

Labour for excavation and refilling of trunch of avg. width of 0.3m & avg depth of 0.8m for earth mat and avg. depth of 0.4m for laying of cable below fixed yard level and any of size as required.

Labour for erection of Yard light pole including laying of cable inside pole. Works carrying out on Line Clear condition

LED lamp 72w fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 amps 2 way strip connector and other consumables. Works carrying out on Line Clear condition

Labour for loading, or unloading or shifting of Non - fragile materials without using Boards Crane (one operation).

Labour for loading, or unloading or shifting of fragile materials without using Boards Crane (one operation)

Labour for loading, or un loading, or shifting of 33KV Breakers, including panels, by own crane arrangement. (One operation). Works carrying out on Line Clear condition

Labour for loading, or un loading, or shifting of 110KV and above Breakers, CT & Etc., by own crane arrangement. (One operation). Works carrying out on Line Clear condition

Labour charges for painting earth raisers by green enamel painting and wherever required including cost of paint (Dulex, Asian Berger perferred) and other consumables as directed by the field Engineer. Works carrying out on Line Clear condition

Hire charges for Crane provided (12 tonne) for any erection or loading, unloading, or shifting of equipments, done by department or by the contractor. Works carrying out on Line Clear condition

Supply of T Clamp for Zebra to Zebra confirm to latest IS

Supply of T Clamp for 75mm Bus To Zebra confirm to latest IS

Supply of T Clamp for 50mm Bus to Zebra confirm to latest IS

Supply of Switch end clamp for 75 mm Bus bar confirm to latest IS

Supply of Switch end clamp for 50 mm Bus Bar confirm to latest IS

Supply of Switch end clamp for Zebra confirm to latest IS

Supply of Switch end clamp for Mink confirm to latest IS

Supply of PG Clamp for Zebra confirm to latest IS

Supply of Free end Clamp for 75 mm Bus Bar confirm to latest IS

Supply of Free end Clamp for 50 mm Bus Bar confirm to latest IS

Supply of Corona Bell for 75 mm Bus Bar confirm to latest IS

Supply of Corona Bell for 50 mm Bus Bar confirm to latest IS

Supply of 6 Bolt Tension fitting for Zebra confirm to latest IS

Supply of 4 Bolt Tension fitting for Zebra confirm to latest IS

Supply of L Clamp for Zebra confirm to latest IS

Supply of 14 S.W.G. M.S.Sheet

Supply of good quality Aluminium Paint

Supply of good quality Red Oxide Paint

Supply of good quality A.C. Black Paint

Supply of GI Bolts & Nuts with washers of various sizes

Supply of Fire Extinguisher foam type trolley mounted 50 Ltr capacity with accessories

Supply of Fire Extinguisher foam type trolley mounted 9 Ltr capacity with accessories

Supply of Fire extinguisher DCP type trolley mounted 25 Kg capacity with accessories

Supply of Fire extinguisher DCP type Portable 10 Kg capacity

Supply of Fire extinguisher DCP type Portable 6 Kg capacity

Rubber Mat 2000X1000X10 mm

Supply of M.S rod of 8mm dia for fencing barricade for LAS Fencing

PVC Pipe 3" Length (75mm Dia-4Kg./cm2) (6Mtr. / No.)

PVC Bend 3" (75mm, "O" Ring Jointing)

Labour charges for structure Dismatling Heavy section (Sectional weight 14kg / m and above) Works carrying out on Line Clear condition

Labour charges for structure Dismatling Light section (Sectional weight below 14kg/m) Works carrying out on Line Clear condition

Dismantling of 33KV / 433V distribution transformer with own crane arrangement. Works carrying out on Line Clear condition

Labour for Dismantling of 33 KV AB Switches, including cost of lubricant, consumable and wiring (if necessary) allignment, checking of operation by both manual and electrical (if necessary) and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour for Dismantling of 110 KV single pole stack up right, under hang or suspension. Works carrying out on Line Clear condition.

Labour for Dismantling of 33 KV single pole stack up right, under hang or suspension. Works carrying out on Line Clear condition.

Labour for Dismantling of 33KV Single Zebra conductor (1 span 3 runs) strung bus including hoisting of insulators Works carrying out on Line Clear condition.

Labour charges for Dismantling of bus bar using 75 mm IPS Aluminium tube with out making bends, including fabrication and any modification of end clamp wherever necessary and as directed by the field Engineer. Works carrying out on Line Clear condition.

Labour charges for Dismantling of bus bar including fabrication and any modification of end clamp wherever necessary and as directed by the field Engineer. Works carrying out on Line Clear condition. with out making bends using 50 mm IPS Aluminium tube

Labour for Dismantling Droppers and jumpers. Works carrying out on Line Clear condition

Labour for Dismantling of HG fuse 3 pole set 33KV. Works carrying out on Line Clear condition

Labour for Dismantling of yard light pole including laying of cable inside pole. Works carrying out on Line Clear condition

LED lamp 48w fitting with fixture and fuse box including wiring and testing for burning condition including the cost of 15 amps 2 way strip connector and other consumables. Works carrying out on Line Clear condition

Handling for Dismantling Labour for loading, or unloading or shifting of Non - fragile materials without using Boards Crane (one operation).

Handling for Dismantling Labour for loading, or unloading or shifting of Fragile materials without using Boards Crane (one operation).

GST for bidders within TamilNadu

GST for bidders outside TamilNadu (IGST)