1.Construction of Anganwadi building in Arungal panchayat in Ariyalur block of Ariyalur District under AGAMT 2024-25

Amount

Earthwork excavation for foundation in all soils and sub-soils to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring, strutting and baling out water wherever necessary and refilling the sides of foundation with excavated earth

Supplying and filling in foundation and basement with filling sand in layers not more than 15cm thick well rammed, watered and compacted complete complying with standard specification

Filling with good river sand including cost and conveyance of all materials to site and all labour charges etc., complete

Cement concrete 1:4:8 mix (one cement four sand and eight hard broken stone) using 40mm ISS HBG metal for foundation including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing, etc., complete as per standard specification

Brickwork in Cement Mortar 1:5 mix using country bricks of standard size including cost and conveyance of all materials to work site and including all labour charges and all incidential charges etc., complete.

Supplying and erecting Centering and Shuttering for soffits including necessary supports and strutting up to 3 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at about 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specification. (Earth beam, Lintel beam and sun shade)

Roof beam alround, Cross wall, hall, store, kitchen, latrine, septic tank

Supplying and fabrication of steel including cost and conveyance of steel to site and all labour charges for straightening, cutting to length, bending to shape and tying in position and forming grills for all R.C.C works

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing etc complete

Weathering course Concrete using best quality broken Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost and conveyance of all materials to site and all labour charges for mixing, laying and finishing, etc., complete

Finishing the top of roof with one course of pressed tiles of size 20x20x2cm with cement mortar 1:3 mix and pointed with the same oiled mortar including cost and conveyance of all materials to site and all labour charges etc., complete

Plastering in Cement Mortar 1:5 mix, 12mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Plastering in Cement Mortar 1:3 mix, 10mm thick including cost and conveyance of all materials to work site and all labour charges etc., complete.

Paving th floor with Vitirified tiles in CM 1:3, 20m thick including cost and conveyance of all materials to site and all labour charges etc., complete

Dadooing of walls with colour glazed tiles of size 150x150x6mm of best qulaity including cost and conveyance of all materials to site and all labour charges etc., complete

White washing two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc., complete

Emulsion painting with approved colour two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Painting with approved colour ready mixed paint two coats including cost and conveyance of all materials to site and all labour charges etc., complete

Construction of Granular Sub base by providing well graded material (25 mm to 4.75 mm IRC HBG metal @ 65 %,4.75 to 2.36mm IRC HBG metal @20%&2.36 mm below IRC HBG metal @15%)& (the material passing 425 microns sieve shall have liquid limit and plasticity index not more than 25 & 6% repectively) spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotovator at OMC and compacting with three wheel 80-100 KN capacity and finished in accordance with the requirements of the specification and thickness as per approved plans or as directed by the Engineer (Mix -in - place method) .

Paving the flooring withPaver block laid over, interlocking blocks including cost and conveyance and all labour charges for 60mm thick

Supply of steel door 0.90 x 2.10m

Supply of steel ventilator 0.90 x 0.45m

Supply and fixing of RCC jolly 0.90 x 0.45m

Supply of steel door 0.75 x 1.20m

Supply of steel window 1.20 x 1.30m

Cost and supply of cuddaph slab 500 thick

Supplying & Fixing in position of Indian type Water closet 580x440mm of approved quality including all labour charges etc., complete

Supplying & Fixing in position Europeon Water Closet with all fittings and 10 lit capacity flusing tank including all labour charges etc., complete

Supplying and Fixing in position of best quality make White glazed wash basin of size 550x 400mm including all labour charges etc., complete

Supply and fixing 500 lr PVC tank

Provision for Rain water harvesting structure Arrangements

Construction of rain water recharge well

Provision for Eletrical arrangements

Provision for Bala painting

Provision for Name board

GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column "BB" for all works in this package}

Shuruthi Engineering