85876 SPECIAL REPAIRS IN DARC HALL (AUDITORIUM) OF THE OFFICE OF PCDA(O) UNDER GE SOUTH PUNE

Amount

Dismantling boarding of any description, fixed in any position like partition etc with nails including frame work of timber complete all as specified and as directed.

M&L for elegant Tile made of perforated cement fiber composite 595x595/295X1195/595X1195x5mm covered with absorptive microfiber coating on the front side and Acoustics fiber on the back side, water resistance, fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and installed on T24 grid system of 0.6mm thick Main 'T' length minimum 3000mm, web minimum 35mm to be placed at 600mm center to center and secondary cross 'T' of length 600mm web minimum 35mm inter locked, Wire Support for Main T to be taken at every 1200mm length wise and 600mm width wise, with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and as directed.

M&L for elegant Fabric Tile made of perforated cement fiber composite 600X600/600X1200X5mm with square edge density 1050kg/m3 covered with fabric on the front side and Acoustics fiber on the back side, water resistance, and fire resistant absorption coefficient upto 0.89 at 160 Hz tested as per ISO 354. The tiles are anti-sag and are installed with Aluminum H Profile on G.I studs 600x600mm center to center 2400mm X 50mm web thickness 0.5mm, flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel with 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing of 50mm 1000 GSM thick absorb wool tested as per Fire Retardant IS 15061-2002 for excellent results complete all as specified and as directed.

Dismantling in timber fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section unframed work complete all as specified and as directed.

Dismantling timber scantling 40 sqcm and over in section, in any position in unframed work complete all as specified and as directed.

S&F of 75x25mm teakwood plank / boarding (1200mm long) planed one side & edges tongued and grooved or rebated and fixed with secret nailed complete all as specified and as directed.

M&L for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

M&L for 2nd class hard wood plain fillets square, rectangular or triangular in section clean sawn secured with nails, sectional area exc. 13 Sqcm but not exc 25 Sqcm etc complete all as specified and as directed.

S&F second class hard wood clean sawn timber fixed as in scantling complete all as specified and as directed.

M&L for 2 coats of bees-wax polishing on surfaces of any description, width or girth including cleaning and preparing the surface after filling wood filler and sand papering up to smooth finish in natural color complete all as specified and directed.

M&L for 0.90mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and as directed.

Taking down chowkats or frames wooden/steel with shutters (w/o taking off shutters from frames) exc 1.5 Sqm and not exc 4 Sqm each complete all as specified and as directed.

M&L for 18mm thick medium density fibre board, exterior grade, fixed to timber framework with screws as in door complete all as specified and as directed.

S&F of 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F of MS sliding door bolts, stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of six bolts and nuts for a bolt plate and two on staple plate of size of 300 mm long complete all as specified and as directed.

S&F of SS butt hinges, medium weight cold rolled of size 100mm complete all as specified and as directed.

Supply and fixing Glass Fiber Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete as specified by the manufacturer and as per directions of Engineer-in-charge.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames, complete as specified by the manufacturer and as per directions of Engineer- in-charge

S&F of 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and as directed.

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

S&F three track sliding aluminium window with two or more shutters With 4 mm thick tinted glass one shutters of stainless steel wire cloth 0.36mm nominal dia and 1.18mm width aperture for mosquito proofing with good quality bearing handles, locks, etc using rubber beading and glazing clip etc using following powder coated sections conforming to catalogue of 'JINDAL' or equivalent make complete all as directed by Engr-in-charge. Bottom frame - 20620 Shutter top & bottom - 20844 Shutter side - 20606 Top frame and slide - 20621 Shutter interlock - 20845 Glazing clip - 19352

S&F aluminium powder coated ventilators/louvers 5mm thick x10cm wide frosted glass strips and following aluminium powder coated section conforming to catalogue of Jindal or equivalent make and rubber beading etc complete all as specified and directed. (a) SP- 20048 (b) Glazing clips-19352

S&F of anodised aluminium Deco grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge

Taking down chowkats or frames wooden/steel with shutters (w/o taking off shutters from frames) not exc 1.5 Sqm complete all as specified and as directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and as directed.

S & F factory made solid PVC moulded door shutters 28 to 30 mm thick (stiles) with 2,4 or 6 raised panels design with 2mm thick moulded PVC sheet on front face & 2 mm plain colour PVC sheet on back face, supplying & fixing solid in frame at site as per specification & drgs with particle board core etc. including 3mm thick, 1st Class HW (TW) beading all around on edging and welding 3 Nos Stainless Steel butt hinges size 100mm with existing MS frame complete all as specified and as directed.

S&F aluminium anodised barrel tower bolts of extruded section 150 mm long complete all as specified and as directed.

S&F aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and as directed.

S&F of 100mm long stainless steel butt hinges medium weight and fixed complete all as specified and as directed.

S&F aluminium handles, anodised, fabricated type, of size 150 mm complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6, type C-2, (40mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and as directed.

M&L for PCC 1:4:8, Type D2 (40mm graded crushed stone aggregate) Cement concrete in foundations, filling and mass concrete complete all as specified and as directed.

M&L for chequered cement concrete tiles 30cm x 30cm x 25mm thick with grey pigment cement and pigment, set, jointed and pointed in neat cement slurry in floors over and including 20mm thick screed bed in CM 1:6 over and including 75mm thick PCC type C-2, 1:3:6 (40mm graded stone aggregate) without using extra cement complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non-skid Ceramic Joint free tiles 300 x 300 x 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L for glazed coloured ceramic Joint free tiles of size 300mm x 600mm x 7-8mm thick in vertical surfaces etc set and jointed in neat cement slurry and pointed in coloured cement to match with colour tiles including 10mm thick backing coat in CM (1:4) and filleting at top etc complete all as specified and as directed.

M&L for vitrified tiles of size 800 x 1200 x 8-10mm thick (square / rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed.

All as per Ser. Item No. 38.00 above but in skirting over and including 10mm thick backing coat in CM 1:4 complete all as specified and as directed.

Demolition of stone slab and tiles of any description or thickness laid bedded and pointed in cement mortar, as in floors, hard standing, Aprons etc complete all as specified & directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including cement screed over 20mm thick screed bed in CM 1:4 complete all as specified and as directed.

Supply and fixing Vinyl flooring of 2mm thick PVC flexible, homogeneous antistatic calendared compacted floor covering, minimum weight 3120 g/m2 in minimum sheet of size 2mtrs. x 20mtrs. approved pattern & colour combination with PUR Protect or equivalent surface treatment having wear minimum resistance of ≤ 4.0mm3 as per EN 660.2 and wear group P as per EN?649 and should have a minimum residual indentation of <0.03mm confirming to EN-433. The laid flooring should have non- directional design, colour dyed as a raw mixture to ensure even colour throughout the thickness and its surface should be densely compacted for improving wear and ease of maintenance with Anti-bacterial and Fungicidal properties. The laid flooring shall confirms the fire rating B1 class as per EN 13501-1. The floor finish should terminate at the room perimeter passing over a concealed cove former and continuing up the wall for 100mm. The joints in the flooring should be sealed by using a PVC welding bar of matching colour to be supplied by the manufacturer, using a hot air gun for fusion of welding bar with flooring and self levelling required underneath with all accessories cove etc complete all as specified and as directed.

S&F cement concrete, Type B-1, 1:2:4 using (20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

Excavation in post holes each not exc 0.50 Cu.mtr & getting out in hard / dense soil including returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering and removing surplus soil to a distance not exc 50 M & making good surfaces complete all as specified and as directed.

S & F steel work in tubular trusses including special shaped washer, including tubular purlins, braces/cross beams, MS base plate to column top with anchoring bolts and base plates to tubular trusses etc. complete all fixing by using ERW or induction butt welded tubes confirming to IS- 1161 - 1979 grade St-240

M&L for MS structural steel work, framed as in trusses, purlins, rafter, post etc. conforming to grade E-250 (Fe-410W, quality A) including shaped washers including necessary cutting required length, notching drilling, riveting and or welding or connecting with nut bolts with angle cleats, fish plat, gusset plate and also erecting in true position complete all as specified and as directed.

M&L for Preparing of new steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M & L for brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified & directed by Engr-in-Charge.

Taking down cement plaster on brick or concrete surfaces including raking out joints,hacking for key scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar (1:6) on brick /surfaces of other than fair face even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in ceilling finished fair and even without using extra cement complete all as specified and as directed

M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick/concrete surfaces in two layers, 5mm thick in CM 1:4 with finished even and fair without using extra cement with water proofing compound in finishing top layer complete all as specified and as directed. (Note :- WPC shall be measured and paid separately)

Supply only integral water proofing compound.

M&L for preparation of new plastered ceiling surface of any description over 10cm girth or width, not otherwise described and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over and including 2mm thick wall care putty on wall , as per manufacturer's specification complete all as specified and as directed.

M&L for preparation of new ceiling plastered surface and applying two coats of white wash complete all as specified and as directed.

M&L for Preparation of new plastered surfaces of walls & applying one coat of primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio 5:4:1 followed by application applying two coats of modified acrylic apex exterior emulsion paint which gives 5 year of performance warranty complete all as specified & directed.

S&F in replacement 1000ltrs rotational moulded polyethylene water storage tanks (vertical cylindrical with closed top) double layered with existing inlet, outlets & provision of washouts, (vent pipe all as directed including all new tank nipples of suitable size complete all as specified and as directed.

M&L for preparation of old plastered ceiling surface of any description over 10cm girth or width, not otherwise described and distempering with two coats of 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete over and including 2mm thick wall care putty on wall, as per manufacturer's specification.

M&L for preparation of old ceiling plastered surface and applying two coats of white wash complete all as specified and as directed.

M & L for Scrapping and removing old paint, loose material and algae, fungus then cleaning of surface with water using pressure washer machine, then crack filling with acrylic based textured crack filler with an application of one coat of primer cum sealer having alkali resistance property diluted with water and mixed with bio block in ratio 5:4:1 followed by application of two coats of modified acrylic exterior emulsion paint of approved shade having silicon additives in paint which gives 5 year of performance warranty complete all as specified & directed.

M & L for preparation of old steel surfaces exceeding 10 Cm width or girth and apply two coats of synthetic enamel paint complete all as specified & directed.

M&L for one coat of synthetic enamel paint on wooden surfaces of any description not otherwise discribed over 10 cm width of girth including preparation of old painted surfaces complete all as specified and as directed.

Removing of old water proofing treatment including screed bed and cleaning the surface of slab with steel wire brushes removing dust, foreign materials including flushing at junction of wall and removing the rubbish off the premises to a distance exc 500m complete all as specified and as directed by Engr-in-Charge

M&L for water proofing treatment to RCC roof slab and shall be carried out as specified below and as directed (a) 10mm thick screed bed in CM 1:3 on concrete surfaces of roof slab and parapets mixed with and including WPC @ 3% by weight of cement finished even and smooth without using extra cement. (b) The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projection, surface washed, dried up and cleaned of all foreign matter and dust to receive primer. (c) Applying bituminous primer on cleaned surface @ 0.40 Litre/Sqm. (d) Providing APP polymer modified approved membrane 3mm thick, non woven, polyster,weighing not less than 3.6 Kg/Sqm and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and applied completely by torch application method, the overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise; all as specified & directed.

ITEM No. 66 Contd.... (e) Carrying out test by flooding water for 24 hrs for leakages & seepages and rectifying the same to the entire satisfaction of GE. (f) Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 litre/Sqm on the top of membrane surfaces complete all as specified & directed. (g) The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer. (Note:- The contractor shall furnish the following :- (i) Quality confirmation from the manufacturer of the product alongwith quantity supplied. (ii) Manufacturer test certificate. (iii) The result if tested any of the independent laboratory, the testing charges shall however be borne by the contractor).

S&F in repairs vitreous china wash down water closet pan, 'Pedestal' coloured, including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F in repairs, PVC seat cover white with flat bottom for vitreous china wash down water closet pan including MS, CP or aluminium anodised hinges devices etc complete all as specified and directed.

S&F in repair of Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F in repair of PVC valveless syphonic action type flushing cistern, low level star white with inlet ball valve float and handle including brackets complete all as specified and as directed.

S&F in repairs of PVC connections 15mm size with PTMT check nuts of length 450mm complete all as specified and as directed.

S&F in repairs of angular stop valves 15mm bore, cast chromium plated, screwed down, high pressure with long shank and cup, screwed both ends for iron pipe and fixed complete all as specified and as directed.

S&F in repairs CP jet spray (L-bend) with flexible 1mtr tube complete all as specified and as directed.

S&F in repair 15mm bore Bib tap, fancy type, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

Taking up or down steel tubing and connections including cleaning for re-fixing or removal to store for the following sizes of pipe :-

15mm bore

20mm bore

S&F of GI tubing tubes "medium grade" galvanized with all fittings and fixed complete to walls / concealed and ceiling or laid in floors in any position or location etc complete all as specifed and as directed.

15mm bore

20mm bore

S&F in repairs 100/75mm PVC floor trap/nahani trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repairs SS grating 75 to 100 mm dia with/without waste hole complete all as specified and as directed.

S&F in repair vitreous china wash hand basin white flat back size 550x400mm incl suitable brackets and fixing with fasteners, PTMT waste coupling 32 mm dia, waste pipe complete all as specified and as directed.

S&F in repairs 15mm dia chromium plated fancy type, pillar tap with fly nuts capstan head screwed down high pressure with or Without lettered hot or cold with long scewed shank complete all as specified and as directed.

S&F of 32/40mm waste coupling of PTMT (half or full threaded) (Minimum weight 32mm- 45gms/40mm-60 gms complete all as specified and as directed.

S&F in repairs high density polyethylene and unplasticised PVC pipe 40mm blue in colour HDPE at pressure rating 6kgf/cm2 fixed complete to wall or floor incl bend tee elbow etc for waste pipe at wash basin /flush tank complete all as specifed and directed.

S&F in repairs 20mm dia brass chromium plated tubular towel rails, D Type , 60cm long between flanges fixed complete all as specified and as directed.

S&F in repairs soap dish SS ISI mark complete all as specefied and directed.

S&F of vitreous china urinals, bowl type (back or corner wall type) with urinal spreader of PTMT any colour for fixing with 15mm dia pipe (min wt 60gms), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement ; fixing automatic flushing cistern with brackets, flush pipe, grating and unior for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed.

S&F in repair of CP toilet paper holder with flat recessed type stainless steel Complete all as specified and directed fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

S&F in repairs 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in tranches complete all as specified and as directed.

S & F PVC (SWR) bends 110mm bore of any radius complete all as specified and as directed.

S&F of PVC(SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F in repairs 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls or laid in tranches complete all as specified and as directed.

S & F PVC (SWR) bends 75mm bore of any radius complete all as specified and as directed.

S&F PVC (SWR) 'P’ trap 110mm bore complete all as specified and as directed.

Taking down aluminium point wiring( light, fan, socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants holder,regulators sockets, light fitting etc removing materials deposited to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc.as per engr-in-charge.

M & L for Point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly all as specified and directed for the following :-

One light point controlled by one, one way switch 5 Amps complete all as specified.

One fan point/ exhaust fan/wall fan point controlled by one, one way switch 5 Amps and regulator complete all as specified.

One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified.

One 3 point 5 Amps switch socket outlet point controlled by one switch on the same board complete all as specified.

One bell point controlled by one, bell switch 5 Amps complete all as specified.

All as per item No 95.00 above but with stranded copper conductor 2.5 Sqmm (nominal area), single core, PVC insulated and unsheathed multistranded FRLS cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet on independent board including PVC insulated multistranded copper conductor 2.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to earth dolly complete all as specified.

S & F modular Bell push modular 6 Amps single module, 230V complete all as specified and as directed.

Suply and fix Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ AC supply including removal of old unserviceable one complete all as specified and as directed

S & F for Modular switch one way 6 Amps, single module, 230V complete all as specified and as directed.

S & F for Modular switch one way 16 Amps, single module, with neon indicator complete all as specified and as directed.

S & F for celling rose 2/3 terminals, PVC/ polycarbonate, isolated body ISI marked complete all as specified and as directed.

S & F for modular step type fan regulator 120 watt single module suitable for operation on 230 volt 50 HZ AC supply complete all as specified and as directed

S & F for Modular socket, 6 Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S & F for Modular socket, 6/16Amps, 2/3 pin combination 2 module complete all as specified and as directed.

S & F Rigid non-metallic PVC conduit of 25 mm dia exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. complete all as specified and as directed.

Supply and replace on load change over switch disconnector in Sheet metal enclosure 200 Amps 415 Volt 4 Pole all as specified and directed

S&F vertical 4 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 160 amps rating, IP- 43 protection & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB complete all as specified and as directed.

S&F vertical 8 way TPN double door recess mounted/wall mounted MCCB's as incommer is 3 pole V- Tec of 160 amps rating, IP- 43 protection & 16 KA breaking capacity MCCB is pre fitted at factory & including price of MCCB complete all as specified and as directed.

Supply and fix in replacement of MCCB 100 Amps, 16 KA, 4 Pole, 415V with thermal release complete all as specified and as directed.

All as per Item No 109.00 above but 160 amps capacity FP rup capacity 35 Ka complete all as specified and as directed by Engineer -in-Charge

S&F MCB DB, SPN, sheet metal enclosure, 8 way with 200 amps rated bus bar double door, with locking arrangement fixed in wall including cutting & making good to disturbed surfaces with existing complete all as specified and as directed.

S&F MCB TP 63 amps,10KA, 240V,'C' series complete all as specified and as directed.

S & F for MCB Single pole and neutral rated capacity 40-63 amps,C curve 240 Volts breaking capacity 10 KA complete all as specified and as directed.

S & F for MCB Single pole rated capacity 6 to 32 amps, 240 Volts breaking capacity 10 KA, c curve complete all as specified and as directed.

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 6.0 Sqmm nominal area and drawing into PVC non metallic rigid PVC conduit including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete including taking down old unsv sub main all as specified and as directed. (Note :- Three runs of 6.0 sqmm cable and one run of PVC conduit will be measured as one unit)

M & L for Sub main wiring with approved colour coding as per IS with two single core PVC insulated FRLS cable with stranded copper conductor of size 4.0 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 4.0 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete including taking down old unsv sub main all as specified and as directed. (Note:- Three runs of 4.0 sqmm cable, and one run of PVC conduit will be measured as one unit)

M & L for Sub main wiring with approved colour coding as per IS with four single core PVC insulated FRLS cable with stranded copper conductor of size 6 Sqmm nominal area and drawing into PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessories ISI marked heavy duty of suitable size concealed in wall etc including one run of PVC insulated 6 Sqmm (nominal area) stranded copper conductor FRLS cable as earth wire complete including taking down old unsv sub main all as specified and as directed. (Note :- Five runs of 6.0 sqmm cable, and one run of PVC conduit will be measured as one unit)

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high output diffuser 2 feet, 10 watt, 220V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S&F LED light luminaire 600 mm x 600mm, 35/36 W, 220V AC recessed type with high efficiency PMMA diffuser soft glare freelight complete with driver holders & LED lamp suitrable for roof ceiling incl connecting up with driver three core flexible copper conductor cases of suitable sizes complete all as specified and directed

Supply and fix LED lamp type flood light fittings, pressure die cast housing with IP 66 protection of capacity 150 watt suitable for operation on 230 volt 50 Hz AC supply complete with all standard accessories and necessary fixing arrangements all as specified and as directed by Engineer-in-Charge (Make - JETAIRISFLS150WLED757PSYMLTG of Havells or of equivalent in Wipro / HPL/ Bajaj)

Supply and fix street light fittings Pressure die cast aluminium housing, IP 66 Proptection, heat resistance toughened glass with frame LED street light luminaries complete with driver and all standard accessories of capacity 30 Watt LED including necessary fixing arrengements with GI Pipe 25mm and MS clamp 02 Nos, necessary connection etcall as specified and directed by Engineer-in-charge

S&F exhaust fan made out of sturdy engineering plastic complete with louvres shutter, 230V, 50Hz, 1200 RPM, coppper winding of 300 mm sweep, 230V AC complete all as specified and directed

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

S & F wall mounted Fan 400 mm sweep of speed 1400 RPM capacity complete all as specifed. (Make- Supreme MKII of Bajaj or Equivalent specified here-in-after)

M & L for earthing with galvanised steel earth plate electrode 60 cm x 60 cm x 6.3 mm buried directly in ground earth pit not less than 2.25 m deep below normal ground level, with top edge of the plate vertically to depth of not less than 1.5 m below ground level connected to and incl GI wire 4 mm dia and GI pipe 15 mm dia light grade for protection to the extent of 7.5 m as earthing lead by means of GI bolts and nuts etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Pt-I incl RCC cover and MS angle iron frame, watering arrangement with GI pipe 20 mm dia and MS funnel, concrete pit incl excavation and earth work in any type of soil and testing on completion etc complete (NOTE:-GI earth wire and protection pipe beyond 7.5m will be measured and paid separately)

Supply, lay, test connecting and commissioning underground stranded aluminium conductor cable LT 1100 volt grade heavy duty XLPE insulated armoured complete laid in trenches / fixed to poles /drawn through pipes with suitable size cable glands criping type cable lugs etc all as specified and directed of size 25 Sqmm 4 core, including taking down old unserviceable cable complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth for taking out cable etc and repairs / laying cables etc and getting out in Soft/Loose soil complete all as specified and as directed by the Engineer-in-Charge.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed by the Engineer - in - Charge.

Removal of excavated material [soil] to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed by the Engineer-in-Charge.

M&L for laying of Reinforced concrete pipes, class NP2 of dia 100 mm bore, 2 nos half round (for bottom and top) and before laying excacaved area shall be leveling complete all as specified and directed Engr-in-charge.

Gauri Associates

S G Enterprises

Suma Construction

Anand Trading Co

M/s.BAJRANG CONSTRUCTION

Vijay Construction and Company

Bidder Name

Vijay Construction and Company