PROVN OF SENTRY POST WITH LIVING ACCN ALONGWITH ATT TOILET AND BATH ROOM WITH ALLIED WK AT DSC POST AT JUNIOR LEADERS WING, THE INFANTRY SCHOOL BELGAUM, CONSTRUCTION OF WALKING PATHWAY SHED FROM BUILDING NO 33,34,35 AND 36 OTM ACCOMMODATION NO1 DEMO

Amount

Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/dense soil complete all as specified and as directed.

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for foundation and getting out in Hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete type D2, 1:4:8 (using 40mm graded stone aggregate) in foundation and mass concrete complete all as specified and as directed

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in foundations, including footings, foundation beams, plinth beams, bases for columns, etc; basement slabs, and mass concrete or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate) as in Columns,Pillars,piers ,posts and struts or similar items complete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in beams, cantilever and lintels over 1.5 m span etc or similar itemscomplete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in chajja or similar itemscomplete all as specified and as directed.

Material and labour for RCC M-25 ,Design mix ( using 20mm graded stone aggregate)as in slab supported on walls, , beams and columns in floors,roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

Material and labour for Use and waste of steel form work for flat rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to side andsoffit of roof beams, tie beams, lintels, cantilevers and supports etc complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface of columns pillars,posts,struts,piers, and stanchions concrete square,rectangular or polygonal etccomplete all as specified and as directed.

Material and labour for Use and waste of form work for Chullah hoods,Chajjas,troughs and similar item includind edges etc.complete all as specified and as directed.

Material and labour for Use and waste of steel form work for rough finished surface to soffit of suspended slabs such as roof slabs, floor slabs, landing and similar work n.exc 200mm thick (horizontal or sloping) complete all as specified and as directed.

Material and labour for Use and waste of steel form work to edges of concrete flat, n.exc 20 cm wide horizontal or slooping and similar works. complete all as specified and as directed.

Supply and fix Mild steel TMT bars of FE 550 D 10mm dia and over, cut to length bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and as directed

Description all as per item No 15 here in before but 5 to 10 mm dia as in stirrups/spacers/binders etc

Returning filling in excavated soil including spreading, leveling Watering and well ramming in layers n.exc 25cm complete all as specified and as directed.

Removing excavated soil n.exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point completeall as specified and as directed .

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for Plain Cement concrete type B-0, 1;2;4 (Using 12.5mm graded stone aggregate ) as in damp proof course 25mm thick using water proofing compound complete all as specified and as directed.Note :Supply only water proofing compound will be measured and paid seperately.

Material and labour for Precast cement concrete block masonry 1:3:6 type C1 ( using20mm graded aggregate) masonry with solid block exc10cm in width and setting in CM 1:6 etc complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 75 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for 25 mm thick Plain cement concrete, 1:2:4 type B1, using 20 mm graded stone aggregate, as in floors etc including necessary steel form work complete all as specified and as directed.

Material and labour for Premium quality Non skid joint free coloured ceramic tiles 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match shade with joint free non skid tiles, over screed bed 15mm thick in cement mortar 1:6 complete all as specified and as directed.Note :Make of ceramic tile ; HR Johnson/Kajaria/Naveen

Material and labour for Premium quality glazed ceramic coloured tiles of size 350x250x7mm/450x350x7mm in dado & skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile . etc complete all as specified and as directed.Note : Make of Ceramic Tile :HR Johnson/Khajaria/Naveen

Material and labour for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

Material and labour for Machine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over rendering 10mm thick in cement morter 1:4 on other than fair faces of brick work or stone masonry surfaces as backing coat of skirting, dado etc complete all as specified and as directed

Material and labour for Second class hard wood plain solid straight chowkhat and frames, wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed..

Material and labour for 35mm thick 2nd class hard wood plain, framed, panelled door shutter (two panels) with lock rail and panels of 12 mm thick plywood BWR 9 ply with commercial veneers on both faces with size of rails and stiles sizes of members of shutters as specified in SSR Part-I,Section 8.Clause 8.24(a) and fitted to Chowkats complete all as specified and as directed.

Material and labour for 35 mm thick 2nd class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (with divided in to square with plain,chamfered or rounded,mitered and rebated sash bars any numbers), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and as directed.

Material and labour for Second class hardwood 30mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauze etc for windows, ventilators for etc provided with stiles and rails and divided into square with plain chamfered or mended mix red and rebated sash bars any numbers size of members of shutters as specified in SSR Part-I Section 8 Clause 8.24 (b) supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix Aluminium sliding windows (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including provision of 4mm sheet glass ordinary quality for panels including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . Note : (i) Each window shall be provided with 2 Nos. of glazed shutters + 1 No. of GI wire mesh shutter of required size. (ii) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iv) Make of sheet glass : Saint gobain/Modi guard/ Gold Fish

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thickwood grain printed PVC sheereinforced with MS square tube and fixing in opening and edges painted to match printed sheet, etc complete all as specified and as directed.

Supply and fix Factory made solid PVC moulded door shutter, 30mm thick (stiles), with 2, 4, 6 raised panel design with 2mm thick Moulded PVC sheet on the front face with wood free EPS as per specification & drawings including 3 Nos MS butt hinge ' medium weight' of 100mm long each, 1 No Aluminium barrel tower bolt of 150mm long each, 2 No of aluminium anodized fabricated type door handle of size 150mm and 1 No of aluminium anodized sliding door bolt each not less than 12mm dia with and incl a minimum of 6 bolts and nuts 4 on bolt plate and two on staple 300mm long with fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed. complete all as specified and as directed..

Supply and fix 75 mm long medium weight, stainless steel, Butt hinges complete all as specified and as directed.(ISI MARKED)

Supply and fix 100 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed.(ISI MARKED)

Supply and fix 75 mm long medium weight, cold rolled mild steel, Butt hinges complete all as specified and as directed.(ISI MARKED)

Supply and fix 300mm long mild steel helical door spring, ordinary rat tail pattern spring, including roller and roller plate complete fixed to wooden/ steel chowkats complete all as specified and as directed. (ISI MARKED)

Supply and fix 100 mm long extruded brass handles, fabricated type polished complete all as specified and as directed.(ISI MARKED)

Supply and fix 150 mm long extruded brass handles, fabricated type polished complete all as specified and as directed.(ISI MARKED)

Supply and fix 100 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 150 mm long Aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.Make:Crown/Classic/Adarsh

Supply and fix 300mm long aluminium anodised sliding door bolt with hasp, staple (bolt type) and fixing clip of sheet cast or extruded section and fixing bolts plate type with bright bolt not less than 12mm dia complete all as specified and as directed. Make:Crown/Classic/Adarsh

Supply and fix Floor door stopper of brass body and tongue anodised with 150mm long cover plate and hard drawn steel spring, fixed in floor complete all as specified and as directed. Make :Crown/Classic/Adarsh

Supply and fix MS Flat iron 25x3mm thick as in hold fast , windties and similar small article conforming to Fe-290 Grade-E-165 complete all as specified and as directed.

Supply and fix Stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed .

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beads in square n exc 0.5 Sqm in each pane complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Material and labour for 4 mm thick sheet glass ordinary quality and glazing with oil putty/ wooden beads in square exc 0.5 Sqm in each pane complete all as specified and as directed. .Make :Saint gobain/Modi Guard/Gold fish

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Material and labour for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Material and labour for Rubber coated chequered cement concrete tile of size 30cm x 30cmx 25mm thick, with grey cement and pigments, with glossy finish on top set, jointed and pointed in neat cement slurry laid over and including 15mm thick screed bed in cement mortar 1:6, etc. complete all as specified and directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth in parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra with sand complete all as specified and as directed

Material and labour for Providing cement concrete type C1 1:3:6 (using 20mm graded stone aggregate) in coping /bed block and surface finished fair and even including necessary steel form work complete all as specified and directed.

Supply and fix 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. .Make :Finolex/Supreme/Prince

Supply and fix 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. Make :Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) bend and accessories with access door complete all as specified and directed . Make :Finolex/Supreme/Prince

Supply and fix 75 mm dia PVC (SWR) bend and accessories with access door complete all as specified and directed . Make :Finolex/Supreme/Prince

Supply and fix 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed . Make :Finolex/Supreme/Prince

Material and labour for 10 mm thick Rendering on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.

"Material and labour for Rendering 5mm thick in cement mortar 1:4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry surfaces finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately."

Material and labour for Rendering 5mm thick in cement mortar 1:3 on soffit of ceiling surfaces, finished fair and even without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound. Make :Impermo'Roff/Cico

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Material and labour for Preparation of newly plastered walls, pillasters, cornices etc and applying two coats of exterior emulsion paint (Apex ultima - Asian paint) over a coat of water based primer complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of newly plastered surfaces of walls, cornices, pillasters, etc and aplying two coats of oil bound distemper (Acrylic distemper washable) over a coat of chalk whitening primer over a coat of 1mm thick wall care putty complete all as specified and as directed.

Material and labour for 1000 litres capacity Rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete all as specified and as directed. .Note :Make of HDPE storage tank : Sintex/Infra/Polycon.(ISI MARKED)

Material and labour for PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished surface even and smooth without using extra cement including necessary steel form work completeall as specified and as directed.

Supply and fix Vitreous china Orissa pattern IWC size 580x440 mm white with integral foot rest complete including P or S trap and provision of lime concrete bedding complete all as specified and as directed

Supply and fix PVC grating square of 150mmSize of PTMT (Minimum weight 100 gms) complete all as specified and as directed. Note :Make: Paryag/M/S Shakthi Industries

Material and labour for PVC (SWR) gully trap of size 125/110mm, setting and jointing with solvent cement. complete all as specified and as directed. Note : Make : Finolex/Supreme/Prince

Supply and fix 110 mm dia PVC (SWR) vent cowl .Note : Make : Finolex/Supreme/Prince

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 600mm long complete all as specified and as directed.Note : Make : Prayag/M/S Shakthi Industries

Supply and fix in repairs Vitreous china wash basin white flat back size 550x400mm , including CI Brackets and cutting for and pinning in ends of CI brackets or erecting stand etc.complete all as specified and as directed.

Supply and fix Tubular towel rail 600mm long of CP brass fixed with and including CP brass screws and plastic cleats ( minimum weight190gm ) .complete all as specified and as directed.(ISI MARKED)

Supply and fix in repairs Syphonic action type low level PVC flushing cistern, 10 litres capacity, white, with inlet, ball valve, float, handle and flush pipe including brackets and connections to pipe .complete all as specified and as directed. Note Make : Parryware (Slim Line) /Hindware/CERA

Supply and fix Unplasticised PVC (UPVC) pipe 20mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 25mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Unplasticised PVC (UPVC) pipe 15mm bore of pressure rating 10 Kgf/cm2 with all fittings & fixed complete to walls, ceilings or laid in floors complete all as specified and as directed. Note Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 15mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe for unions complete all as specified and as directed. Note : Make : Seico / GEM /ESS ESS

Supply and fix Gun metal gate valve with iron wheel head screwed boh ends for iron and fixed for 25 mm bore dia of pipe , heavy duty ISI marked complete all as specified and as directed. Note : Make : Kartar/leader/Zoloto

Supply and fix 15 mm bore Bib tapcast copper alloy, chromium plated screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Note : Make : Seico / GEM /ESS ESS

Supply and fix 15 mm bore Pillar tapcast copper alloy, chromium plated screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed Note : Make : Seico / GEM /ESS ESS

Supply and fix Vitreous china urinal bowl type (back or corner wall type), of size 465mm x 355mm x 265mm white (minimum) with grating and union for discharge pipe complete including providing and fixing plug, bedding urinal against wall in cement mortar 1:2, securing urinal to plug with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and as directed

Supply and fix in repairs PVC connection 15mm size with PTMT nuts, 450mm long complete all as specified and as directed.Note : Make : Prayag/M/S Shakthi Industries

Supply and fix Brass chromium plated over head perforated shower rose with swivel joint type 125mm size suitable for fixing with 15mm bore pipe including 195 mm long brass CP shower arm complete all as specified and as directed. Make : Hindware Overhead Shower With Shower Arm & Wall Flange(Project) - F160039

Material and labour Corner glass shelf, 5mm thick, 9" wide, fixed with suitable mild steel CP brackets, nuts & bolts,complete all as specified and as directed. Make: Jaguar /Hindware/CERA

Material and labour for Machine cut Granite stone tiles, 20mm thick, as in risers of steps, skirting, dado, cladding to pillars, etc., laid and jointed with grey cement slurry mixed with pigment to match the shade of the tile including bull nosing the edges, rubbing and polishing complete and 10mm thick backing coat in CM 1:4complete all as specified and as directed.

Material and labour for PCC (1:2:4) type B1 by using 20mm graded stone aggregate as in roof padding/benching for maintaining stope wherever required over slabs n exc 15 cm thick including necessary steel form work and finishing the exposed surfaces even without using extra cement complete all as specified and as directed.

Material nad labour for Preparation of RCC roof slab by removing dust, dirt and applying oil bound bituminuous primer at the rate of 0.2kg per Sqm and providing APP modified water proofing membrane weight not less than 4kg/Sqm reinforced with non oven polyster matt weight not less than 160gms per Sqm including minimum 10cm side/over lap and applying a coat of blown hot bitumen grade 85/25 over membrane at the rate of 1.2kg per Sqm and on drying apply a coat of solar reflective bituminous aluminium paint at the rate of 0.1kg/sqm.complete all as specified and as directed.

Material and labour for Rendering 10mm thick on concrete surfaces in CM 1:3 with water proofing compound and finishing the surfaces even & smooth without using extra cement.complete all as specified and as directed. Note :water proofing coumpund shall be measuerd separately .

Supplying and laying of 40 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete on walls, ceilings or laid in floors complete all as specified and as directed. Note : Make of CPVC Pipe :Astral/Ashirwad

Description all as per item No 95 here in before but of 25 mm outer dia CPVC pipe

Excavation in trenches n. exc. 1.5 m wide and n. exc. 1.5 m in depth for laying of pipe line,cables etc and getting out in any type of soil complete all as specified and as directed.

Supply and fix Gun metal gate valve with iron wheel head screwed boh ends for iron and fixed for 40 mm bore dia of pipe , heavy duty ISI marked complete all as specified and as directed. Note : Make : Kartar/leader/Zoloto

Material and labour for Construction of valve chamber of internal size 900 x 900 x 900mm suitable for 150 mm dia sluice valve including necessary earth work excavation PCC 1:4:8 in foundation type D-2 using 40mm graded stone aggregate, brick wall in CM 1:4, PCC 1:2:4 type B-1 for coping, 15mm thick rendering in CM 1:4 including provision of MS sheet cover 3.0mm thick with MS angle frame 40 x 40 x 3mm all round and at diagonals of size 40 x 40 x 6mm and also MS plate welded to MS angle, embedded in concrete with suitable hinges and locking arrangements, including two coats of synthetic enamel paint over a coat of red oxide primer over new steel surface etc complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 16 Sqmm, 4 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D-2 ( using 40mm graded stone aggregate) as in bed to drain pipes including packing under haunching and benching against the side of pipe after they are laid and tested in 200mm dia of pipe complete all as specified and as directed

Material and labour for 200mm dia RCC pipes class NP-2 (ISI MARKED) laid in trenches and jointed in cement mortar 1:3 complete with collar complete all as specified and as directed

Material and labour for PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) as in channel and benching including necessary steel formwork complete all as specified and as directed

Extra for forming Fair finished drain or channel of inner girth not exc 30 cm in cement concrete using extra cement including forms, moulds , mitred/stopped ends etc.complete all as specified and as directed

Material and labour for Rendering 15mm thick other than fiar faces of brick/block masonry work in CM 1:4 and finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for Rendering 15mm thick other than fair faces of brick/PCC block masonry work in CM 1:6 and surface finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for Precast cement concrete manhole cover slab in 1:2:4 type B-1, with using 20mm graded stone aggregate and jointed in CM 1:6 including necessary steel form work /moulds etc complete all as specified and as directed.

Material and labour for Rendering 15 mm thick on fair faces of brick work or concrte surfaces in CM 1:4 , surface finished even and smooth without using extra cement complete all as specified and as directed..

Supply and fix Mild steel framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe-290 Gde- E-165 complete all as specified and as directed.

Excavation in post holes each n. exc. 0.5 Cum getting out, in hard/dense soil, returning, filling in and ramming earth or broke rubble mixed with earth around in layers n. exc. 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good the surface complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.45mm thick(TFT) of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as in roof covering completec all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.45mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge, fixed with self tapping screws and washers completec all as specified and as directed..Note:Make of Galvalume sheet:Tata Blue scope Ltd/Jindal (Colouron)/Llyod

Supply and fix Mild Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240 completec all as specified and as directed.

Material and labour for PCC 1:4:8 type D2, (Using 40 mm graded stone aggregate ) 50 mm thick as in sub base to floor including necessary steel form work complete all as specified and as directed.

Material and labour for Preparation of newly plastered wall surfaces and applying two coats of cement based paint over a coat of chalk whitening primer complete all as specified and as directed.

Material and labour for Concealed point wiring in and including rigid non - metallic PVC conduit, ISI marked 19/20 mm dia, with 1.5 Sqmm size FRLSH PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as per IS colour code, with cast iron / pressed steel terminal box of suitable size and 1.0 mm thick duly painted inner and outside by anticorrosive paint, for switches, sockets, fan regulator etc with 3 mm thick plastic laminated sheet cover with brass screw, cup washer and including 1.5 Sqmm size FRLSH PVC insulated unsheathed stranded copper conductor cable, single core, 1100 volts grade as continuous earth wire complete all as specified and as directed.NOTE: (i) Make of PVC cable :Finolex/Polycab/Havells(ii) Make of PVC conduit : Avon Plast/Presto plast /Garware

Description all as per item No. 119 here in before but for One fan/Exhaust Fan point controlled by one switchand regulator.

Description all as per item No. 119 here in before but for One 05 Amps socket outlet on independent board.

Description all as per item No. 119 here in before but for One socket point control by one switch with other switches on same board

Description all as per item No. 119 here in beforebut wiring with 4 Sqmm single core PVC insulated FRLSH unsheathed 1100 volt grade copper conductor and with one run of copper conductor FRLSH PVC insulated multi-stranded cable 4 Sqmm for earth continuity conductor and connecting to common earth dolly, complete for one 15 Amps power socket point on independent board all as specified and directed.

Supply and fix Switch piano, flush type single pole, one way, 5 Amps, 240 volts complete all as specified and as directed. Make -Anchor /Indo Asian/Havells

Supply and fix Socket outlet 2 in 1 5 pin, 5 amp, flush type complete all as specified and as directed. Make -Anchor /Indo Asian/Havells

Supply and fix Switch piano flush type 15 Amps 230 volts complete all as specified and as directed. Make -Anchor /Indo Asian/Havells

Supply and fix Socket outlet 15 Amps 3 pin 5 Amps cum 3 pin 15 Amps flush type multipurpose, complete all as specified and as directed. Make -Anchor /Indo Asian/Havells

Supply and Fix Ceiling rose surface Bakelite, 65x50mm three terminals 230 Volts, AC Single phase complete all as specified and as directed. Make -Anchor /Indo Asian/Havells

Supply and fix Fan regulator electronic step type suitable for 1200 mm sweep ceiling fancomplete all as specified and as directed. Make -Anchor /Rider/Havells

Supply and fix in repair LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and connecting up with FRLS PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed . Note :Make: Philips cat part no :BN 021C LED20S PSU CDL or Equivalent in M/S Wipro/CG

Supply and fix LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up withFRLSH PVC twin core twisted flexible copper conductor cable with suitable size complete all as specified and as directed. Note : Make : Philips cat part no : BN 021 LED10S- 6500/4000 PSU GR S1 or in of M/S Wipro/CG

Supply and fix LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and as directed. Note : Make :Philips BRP050 LED 036 CW R1 MF PC S1 PSU GR equivalent in M/S Wipro/CG

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding , sweep 250 mm with necessary grouting and fixing arrangements and provision of FRLS PVC 3 core flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed Note:Make :Almonard/Khaitan/CG

Supply and fix Exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm with necessary grouting and fixing arrangements and provision of 3 core FRLSH PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and as directed. Note:Make :Almonard/Khaitan/CG

Supply and fix Factory made Epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note : Make : Indo Asian/Legrand /L&T

Supply and fix MCCB,4 pole,125 Amps , 16 KA current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified.Note : Make : Indo Asian/Legrand /L&T

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed on wall sunmica board and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified and as directed . Note : Make : Indo Asian/Legrand /L&T

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB with connectioncomplete all as specified and as directed Make - L&T / Legrand/ Indo Asian

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 to 32 AMP following poles and current carrying capacity in the MCB DB with connectioncomplete all as specified and as directed Make - L&T / Legrand/ Indo Asian

Supply and fix Storage type electric water heaters (vertical geysers) of 50 litres capacity, 5 star rating, upto 2000w fixed to wall with suitable bolts and nuts duly grouted including re-connecting the electrical and water supply connection and testing complete all as specified and as directed. Make : 5 Star rated Bajaj Calenta/Havells Monza

Supply and fix PVC connection, ISI marked, 15mm dia 600mm long with brass nuts suitable for hot/ cold water supply all as specified and directed.Note:Make :Finolex/Supreme/Prince

Supplying and laying of 16 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings, fixed complete on walls, ceilings or laid in floors complete all as specified and as directed. Make of CPVC Pipe :Astral/Ashirwad

Description all as per item No 152 here in before but of 20 mm outer dia CPVC pipe

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 40 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle

made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

M/s B C CHOUGULE

AARADHYA ENTERPRISES

SHRI.H.R.PATIL

M/S JAYDEEP CONSTRUCTION

DHANSHRI ENTERPRISES