138WE/L-54/2025-26

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone-work and precast concrete articles/concrete block walling complete all as specified and as directed by Engr-in-Charge.

M&L for pre cast cement concrete block masonry of 1:3:6, type C-1 (using 20 mm graded crushed stone aggregate) with soild blocks, exc.10cm in width, set and jointed in cement mortor 1:6 specified and as directed by Engr-in-Charge.

All as per item No 2 above but except cement concrete blocks (old blocks obtained from demolition shall be reused).

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in CM 1:6 complete all as specified and as directed by Engr-in-Charge.

All as per item No 4 above but except stone (old stone obtained from demolition shall be reused).

M&L for raised pointing to random or polygonal rubble, uncoursed or brought upto courses in CM 1:4 complete all as specified and as directed by Engr-in-Charge.

Taking down cement plaster of any description on brick or stone walls, concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed by Engr-in-Charge.

Rendering 15 mm thick on fair faces of brick work or stone masonry work, finished even and smooth (without using extra cement) on walls in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of primer including curing before and after applying each coat complete all as specified and directed by Engr-in-Charge.

Preparation of old plastered surfaces of wall and applying one coat of cement base paint including curing before and after applying coat complete all as specified and directed by Engr-in-Charge.

Complete removal of existing old treatment of any description and preparation of surfaces by washing, rubbing down and applying two coats of exterior emulsion weather proof paint over a coat of primer complete all as specified and as directed by Engr-in-Charge.

Preparation of surfaces and applying one coat of terra cotta on plaster, concrete, floor and tiling surface complete all as specified and directed by Engr-in-Charge.

M&L for factory made precast PCC blocks (1:2:4) type B-1 (using 20 mm graded crushed stone aggregates) as in kerb stone of size 300 x 300x 100mm thick (width and depth of kerb stone shall be 100mm & 300mm respectively) set in CM (1:4) including demolition of existing incl necessary earth work complete all as specified and directed by Engr-in-Charge.

Preparation of newly plastered/concrete surfaces of any description over 10cm with width or girth and applying two coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Demolition of unreinforced cement concrete in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.

M&L for plain cement concrete 1:4:8, type D-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

Dismantling chain link fencing wiremesh any type complete all as specified and directed by Engr-in-Charge

Dismantling posts or struts (steel or RCC) any section embedded in concrete, brick work etc including taking out embedded portion.

Excavating in post holes in hard/dense soil (of similar holes) each n. exc. 0.50 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25cm, watering and removing surplus soil to a distance n. exc. 50m and making good surface complete all as specified and directed.

S&F angle iron with swan neck as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc, hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire all as specified and directed.

Supply only mild steel Galvanised wire chain link fencing square mesh of any size made out of any size wire complete all as specified & directed

Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other ends with washers n . exc 12mm dia and not exc 5cm long complete all as specified and as directed.

Preparation of new steel surfaces n exc 10 cm with or girth and applying two coats of synthetic enamel paint over coat of red oxide zinc chorme primer complete all as specified and directed.

S & F in repairs galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised MS wire staple or steel pins etc as directed (each line wire to be measured.) complete all as specified and directed.

Preparation of new steel surfaces exc 10 cm with or girth and applying two coats of synthetic enamel paint over coat of red oxide zinc chorme primer complete all as specified and directed.

Plain cement concrete 1:3:6 type C-1 (using 20mm graded crushed stone aggregate), as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, benching, kneelers, apex stones, bed plates, kerbs not provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Demolition of cement concrete (unreinforced) of any description and in any position not other wise specifically provided for and removing debris outside the MD land to a distance n exc 50m complete all as specified and directed by Engr-in-Charge

M & L PCC 1:3:6 type C1 using 20 mm graded aggregate in surface channels and drain, complete all as specified and as directed.

Extra for forming fair finished drain or channel 45 cm inner girth in cement concrete, using extra cement incl forms, moulds, mitred/stopped ends etc.

Dismantling structural steel work including doors and gates of any description.

S & F, Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete and conforming to Fe 410-W Gde E-250 quality 'A',complete all as specified and as directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite black complete all as specified and directed.

S & F 2mm Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L type J type hooks or cranked bolts and washer in roof, wall etc including dismantling plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed.

S&F rolled tubular sections as in framing for clading, glazing and the like fixed with angle cleats and connecting plates etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

S&F pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling of existing plain or corrugated sheet of any description complete all as specified and directed by Engr-in-Charge

S&F 0.63 mm thick corrugated mild steel sheeting with two corrugations side lap, fixed with J or L hooks, in roofs, walls etc. with grade of zinc coating 275 including dismantling of existing plain or corrugated steel sheeting any guage thickness including nanital or similar pattern complete all as specified and directed by Engr-in-Charge

M & L for 2nd class hard wood clean sawn as in scantling fixed with nails, framed and fixed as in framed work including dismantling of existing timber scantlings 40 Sqcm and over in section, in any position complete all as specified and directed.

TIRUPATI ENGINEERS CORPORATION (BID ID -3338083)

VIMAL TRADERS AND SUPPLIERS (BID ID -3329138)