E.I. Work for the newly build basketball ground and canteen at the APC Roy Govt. College, Himachal Vihar, Matigara, Dist. Darjeeling.

Amount

S&F double door 6WAY VTPN MCB DB for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and eutral link & provision for earthing attachment i/c: 01 no. 415V, 100A FP MCCB, o/g: 6nos. 415V, 63A TPMCB [Make: L&T/SIEMENS /ABB]

S&F double door 8WAY HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with Suitable size of copper wire and neutral link & provision for earthing attachment i/c: 01no. 415V,63A FP MCB, o/g: 6-32A SP MCB-----24nos. [Make: L&T/SIEMENS /ABB]

S&F double door 4WAY HTPN MCB DB with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with Suitable size of copper wire and neutral link & provision for earthing attachment i/c: 01no. 415V,40A FP MCB, o/g: 6-32A SP MCB-----12nos. [Make: L&T/SIEMENS /ABB]

S&F 415V, 63A Changeover switch with SS enclosure on angle iron frame on wall with nuts bolts etc. [Make: Havells/ HPL/Standard]

S&F sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD speci fication Book – May 1991)4 bars AL busbars 415V,315A Dimension of Al. bars [85mm long]4 x 50x10mm Dimension of Sheet Metal Box 500x150mm

S&F dd 2+6 way SPN MCB db with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. i/c:32ADP MCB-----01no. o/g: 6A sp mcb ------ 6 nos[Make: Havells/Standard/L&T]

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with perspex /bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] Average run 6 mtr

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)

2 x 56/0.3 (4 sqmm) + 1 x 22/0.3 (1.5 sqmm)

S&F 230V,50Hz 20W 100lm/W LED tubelights in the garrage with cable ties with proper connections[Make:Crompton TRIM LINEA /SYSKA LED/IB LED]

S&F 230V, 50Hz 120W LED flood light[Make: SYSKA FLN 120W/IB LED/Havells]

S&D 9mtr 125mm dia GI pole. [Make:ISI approved company]

Erection of Single Steel tubular pole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x 600x150 mm thick CC (4:2:1) base block below sole plate /pole with hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work-site including filling up the excav ated earth pit with shifted soil and ramming properly Upto 9.0 mtr. Size 0.6x0.6x1.70 mts

Extra on items 1& 2 above, for providing CC (6:3:1) base block (around the pole) dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) suitable for alkathene/ polythene pipe entry as directed for street light wiring, incl. S & F 25cmx25cmx10cm GI Loop box, 16SWG & incl. drilled hole in pole

Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paint Upto 9.0 mtr. long pole 1.One coat of red lead/Zinc chromate priming 2.1st coat of synthetic enamel paint over the primer 3.2nd coat of synthetic enamel paint over the 1st coat

Supplying & Fixing GI waterproof type looping cable box size 200x150x100 mm deep having 4 mm thick comprising of one 250 V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint

S&L 1.1kV grade PVC/XLPE Al armoured cable 4X16sqmm in wall by saddling it as per GS.

S&L 1.1kV grade PVC/XLPE Al armoured cable 2X6sqmm in wall by saddling it as per GS.

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below : 4X16sqmm

2X6sqmm

S&F 50 mm dia medium gauge GI Pipe ( ISI-Medium) Prote ction with necessary fittings and jointing metarials as reqd.

Supply & Fixing of outdoor type LED Sign Board (35’(L) X 5’(B) X 5”(W)) fabricated from 3mm thick ACP sheet on all six sides finished with approved metallic colour & suitable size hollow MS rectangular bar as frame inside the box. All LED Module, wiring to be fixed inside the ACP box.

Silicon adhesives, SS screws to be used in such a way so that ingress of water can be restricted inside the box and maintenance / replacement of the LED modules can be done easily. All screws / nuts& bolts / clamps etc metals used inside the box should be of non-ferrous metal / Stainless steel .Appropriate size of MS Angle , nuts / bolts and clamp to be used outside for fixing the box.

Supply & Fixing of Special type of 3D Boxing type letter with top cover openable made from imported 3mmthhick Acrylic sheet (Letter Height: 30”, Width: 24", Depth: More than 1.5") to accommodate LED module . Only front side of the letter should emit light.

Side to be made from opaque acrylic sheet . Width of the letter will be proportionate . Suitable Ratio should be maintained between the letter size, spacing between each letters & spacing between each words as per the direction of EIC. (Calculation of area( Square inch) of a letter will be Height X Breadth of the letter inclusive all wastage.

Supply & Fixing of LED within the acrylic letter from backside [Make: SAMSUNG/ Meanwell or equivalent] having the following specifications: COLOUR: WHITE or as per the choice of EIC. LIFE: 70,000 burning hours.

INTENSITY: Uniform without any bright/dark patches. VISIBILITY: 100Mtrs at least for normal eye vision. AMBIENT AIR: 0-50⁰ C ; 100% Relative Humidity. POWER CONSUMPTION: 1.5 Watt per module. (1 module consisting of 3Nos of LED with lens)

Supply installation testing and commissioning of waterproof type Power Supply unit to be fitted inside the Signboard box.Input- 100V - 240V AC; 4A; 50Hz.Output- 12V DC; 17-20A constant power supply.[Make: Meanwell / Ven / Resang or equivalent]

Supply and fixing MS Structure for holding 35’x 5’ LED sign board by 65 x 65 x 6 angle as Vertical members and 50 x 50 x 6 angle and 25x6 MS flat as horizontal member including paint ing the MS structure and fixing with CC found ation on the roof as per direction of the EIC

Fixing outdoor type fluorescent/SV/MV light fitting on pole including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-M) bracket with 40 mmx10 mm thick, MS clamp etc. and prov iding wiring with 2x1/1.40 PVC insulated & sheathed wire (single core) partly in GI conduit & partly through above bracket from OH line to the fitting, without control switch, incl. making connections and painting

S&F 240 V, 1 no. 6A, & 1 no. 20A plug socket with separate 1 nos. 6 A & 1 nos. 20A Piano key type switch,(Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 200 mm x 150 mm x 65 mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite/ perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 20 A Piano key type switch (Brand approved by EIC) on sheet metal switch board incl. S & F 100x100x65mm MS (16SWG) switch board and bakelite /perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

S&F 240V, Sweep 450 mmAir Delivery 150 M3/MinSpeed 1440 RPMPower Input 58 W all body metallic wall fan. [Make: USHA DOMINAIRE WALL/ CROMPTON Vortex]

S&F 230V, 50Hz, 12'' or 300 mm sweep heavy duty meatal body exhaust fan with al louver shutter as per GS [Make: Usha TURBO HEAVY DUTY/EPC/Orient/Havells]

S&F 415V, 63A 300mA RCCB in 4module GI modular board [Make:L&T/Siemes/ABB/Crabtree]

S&F 230V,50Hz, 20W recessed mounted LED lights in the false ceiling after cutting the false ceiling.[Make:SYSKA SSK-RDL-R-20W/IB LED/Havells]

Add 12% GST

Add 1% Labour Welfare Cess

RAJESH ENTERPRISE

A.K.CHOUDHURY AND SONS