Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹40.3 Laccepted-aoc | accepted-aoc |
Tender Value
₹40.7 L
EMD Value
₹40,710
Closing Date
16 Mar 2026, 10:00 pmClosed
Public Works Department
EXECUTIVE ENGINEER
Arresting leakages from expansion joints at 4th floor and terrace at 4th & 7th floor
PWD/2025-26/BD/WORK_INDENT30266/CALL-2
PWD/2025-26/BD/WORK_INDENT30266/CALL-2
Reserved
Buildings
Two Tender Document System(Two Cover)
PWD No.1 Buildings Division Office Bengaluru
5 documents required · 5 mandatory
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 b)Satisfactory completion as prime contractor any Civil Engineering works to an extent of 25% of the cost of the work i.e. Rs 10.20 Lakhs
3.2 To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2020-21 to 2024-25 a)Achieved in at least one financial years an average annual financial turnover (in all classes of civil engineering construction works only) of Rs. 40.70 lakhs
3.6.Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity (AxNx5- B) Where A is Maximum value of civil engineering works executed in any one year during the last five years taking into account the completed as well as works in progress. N is Number of years prescribed for completion of the works for which tenders are invited 2 month. B is Value, at 2025-26 price level, of existing commitments and on-going works to be completed during the next 2 month. Note The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent
The intending bidder shall enter into tie up agreement with authorized Compactor manufacturer or supplier with ISO 9001/ISO 14001/ISO 45001 in Rs.200 stamp paper in which shall be concluded prior to bidding and the same shall be uploaded to bid document with his supply and installation details with Amount. Each Tenderer should further demonstrate
₹1,020
₹40,710
16 Mar 2026
7 Mar 2026
17 Mar 2026
13 Mar 2026
Arresting leakages from expansion joints at 4th floor and terrace at 4th & 7th floor by providing Grouting, cracks filling, Water proofing and other allied works at New kumara krupa guest house, Kumara krupa road, Bangalore.
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
polyurethane based single Component for Existing surface - Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acry...
Crackfilling - Providing Waterproof treatment to the cracks using 1 coat of bondcoat of SBR latex and Cement at the ratio 1:1 and then preparing Cement Mortar of 1:3 admixed with SBR latex...
UGT/oHT (inside) waterproofing with Anti-microbial Coating - Providing and Applying two component, water-based food grade epoxy resin coating on inside surface of Potable water tank having anti-algae,...
structural strengthening with Epoxy Injection Grout - Providing and grouting with two component low viscous Moisture Insensitive Epoxy Injection Grout to strengthen the structure at cocrete cr...
Expansion Joints - Providing waterproof treatment to Expansion joints using 2 coats of acrylic co-polymer elastomeric sealer and protector. The surface shall be prepared free of t...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
KW2 30266 CAT-2A.doc
Tender Document • 0.88 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .