REPAIR REPLACEMENT TO TILING PLASTERING JOINERY SANITARY PLUMBING ROOF TREATMENT AND OTHER MISC B/R WORKS IN OTM ACCN OF 505 ABW UNDER AGE BR I OF GE NORTH DELHI CANTT 10

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding and also backing plaster removing serviceable tiles to store and rubbish off the premises complete all as specified.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar 1:6 laying floor finishes complete all as specified.

M&L vitrified ceramic tiles 10mm thick square/rectangular shade as approved)granite or marble texture polished, area of each tiles not exceeding 0.36 sqm, as in floor etc set and jointed with neat cement slurry and pointed with white cement mixed with pigment to match the colour of the tile complete all as specified and directed.

All as per the description of srl item No 3 but on vertical surface as in skirting over and including 10mm thick rendering in CM 1:3 even on fair faces of brick work complete all as specified and directed.

M&L for non skid coloured ceramic tiles (square/rectengular) 7 to 8mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface all as specified.

M&L for glazed coloured ceramic tiles in dado/vertical surface (350mm x 250mm x 7 mm/450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in coloured cement to match the surface complete over and including 10mm thick rendering as backing coat on fair faces of brick /concrete surfaces in cement mortar 1:4 and rough finished on vertical surfaces to recieve tiles complete all as specified and directed.

M&L digital glazed ceramic coloured tiles 600mm x 300mm x 8mm to 9mm thick in repair as in dado/skirting set and jointed in neat cement slurry and pointed in coloured cement to match the colour of tile over and including 10mm thick rendering as backing coat on fair faces of brick /concrete surfaces in cement mortar 1:4 and rough finished on vertical surfaces to recieve tiles complete all as specified.

M&L for ultra design tiles with PU coatingin repair of size 300mm x 300mm x 22mm thick made in rubber moulding with white cement, as in floors jointed and pointed in neat cement slurry all as specified.

M&L for 12mm thick endura tiles (square or rectangular) area of each tile exc 0.08 Sqm but n exc 0.18 sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15mm thick screed bed or bedding layer of cement mortar 1:4, including dismantling old floor tile including cement mortar bedding and removal of debris out of premises complete all as specified and directed.

M&L machine pressed precast rubber mould coloured concrete paver blocks of 60mm thick in repair any shape and size conforming to IS 15658-2006, M-35 grade with grey cement and no pigment complete all as specified and directed.

M&L for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate, 75mm thick as in sub base complete all as directed and specified

M&L for plain cement concrete M-10, nominal mix, type C-1, using 20mm graded mechanically crushed stone aggregate, 75mm thick as in plinth protection etc., surface finished even and smooth without using extra cement and laid to a slope of 1 in 24 in alternate panels n.exc. 1.20 Sqm each, 12mm wide and 5 cms deep joints shall be formed between the bays and shall be filled with mastic filling comprising a mixture of one part of heated blown bitumen VG-10 and two parts of heated coarse sand (by volume), all as specified & directed. Note:- The unit rate include for use of form work (straight or curved).

M&L for cement concrete work in pavement/hard-standing in alternate bays between joints & contraction expansion joint or between the two contraction joints of flexural strength 40Kg/per square centimetre in field using 400 Kg of cement per cubic metre, thickness of concrete 25cm or less including necessary use and waste of side form work for laying pavement concrete all as specified and directed.

M&L for forming 12-15mm thick expansion joints, up to 100mm depth, in new or old concrete machenically, cleaned it and filled with pre-formed bituminous filler and tip 30mm primed and sealed with sealing compound, Grade 'B' complete all as specified and directed.

Demolition of plain cement concrete (unreinforced) of any thickness of any description and in any position not specifically provided for complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls/ceiling etc including raking out joints, hacking for key, scrubing down with water etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast articles, complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan on exceeding 6m mean radius, using old size brick, built in cement mortar 1:6, complete all as specified and directed.

All as per the description of srl item no 18 above but except bricks ditto

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick on brick work or concrete surface in cement mortar 1:4 mixed with water proofing compound finished even and smooth without using extra cement all as specified. Note:- The cost of WPC is deemed to be included in quoted rate against this item.

M&L for rendering 10mm thick on brick or concrete surface as in ceiling in cement mortar 1:3 finished even and smooth without using extra cement all as specified.

M&L preparation of newly plastered surface on walls and applying two coats of oil bound distemper over 2mm thick wall care putty complete all as specified and directed.

M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for preparing newly plastered surfaces of ceilling and applying three coats of white wash complete all as specified and directed.

M&L preparation of newly plastered surfaces of walls and applying two coats of cement base paint complete all as specified.

M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat 1mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment of wall including cornice etc by washing rubbing down and stopping holes, and applying two coats of cement base paint over one coat of primer of approved shade complete all as specified and directed.

M&L for preparation of old or new plastered surface of wall and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489;2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @0.90litre/10sqm over new surface complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified.

M&L for preparation of old steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area not exceeding 1.50 Square Metre each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt ), all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from frames) area exceeding 1.50 square metre and not exceeding 4.0 square metre each, including cutting holes for taking out holdfasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.), all as specified and directed.

Taking down door shutters of any description exc 1 Sqm & n.exc 2 Sqm each complete all as specified and directed

S&F rolled section as in framing for door/vent/CB chowkhats and the like fixed with angle cleat and connecting plates incluidng welding 3 Nos MS butt hinges 100mm & 01 No 50mm complete Note:- Butt hinges shall be measured and paid for separately.

M&L for factory made, 2nd class hard wood 35mm thick, plain framed, panelled shutters (two panels) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered partical board with commercial veneering on both sides. The size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

S&F 35mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars) chamfered or rounded, fitted with cut and mitred beads for securing glass etc., sizes of members of shutters as specified in SSR Pt I Section 8, clause 8.24 (a)

S&F 40mm thick flush shutter (Factory made) soild core construction, with black board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F powder coated aluminium window made of aluminium tubular frame and double shutter of section 63.50mm x 38.10mm x 1.60mm and style fixed openable horizontal and vertical member aluminium beading, rubber gasket, aluminium fittings such as tower bolts, handle stay and rod and hinges including 5mm thick glass and gange etc complete all as specified and directed. Note:- The cost of fixtures / fittings of window shutter including glass and wire mesh are deemed to be included in the quoted rate against this item.

S&F powder coated aluminium anodised hollow section door frame and shutter (swing type) openable with top rail, style of section 47.62mm x 44.45mm x 1.60mm and lock rail, bottom rail of 101mm x 44.5mm x1.6mm including jointing cleats, snap beading, glass/ novapan board, gasket for fixing glass/board in panel including 1 door closer (hardwyn) 2 nos dish type handle, hinges, tower bolts -02 Nos 150mm in each leaf and screws complete all as specified. Note:- The cost of fixtures / fittings including glass of door shutter is deemed to be included in the quoted rate

S&F anodised aluminum alloy powder coated standerd hollow section for window two tracks including aluminum frame/ chowkhat with following specification including anodised aluminum snap beading, channels, 5mm thick tinted glass, glazing clips joint cleats, rubber gassket etc and other accessories complete all as specified and directed. (a) Frame of section :- 83.50mm x 44.50mm x 1.60mm thickness. (b) Sliding window section (channel):-40mm x 18mm of 1.20mm thickness with locking arrangement. Note:- (1) The rate also included the cost of cutting, waste and making good disturbed surface, matching with existing surface and finish as directed. (2) Minimum thickness of powder coating shall be 50 micron. (3) Make for PVC sheet :- sintex, Rajshree & Tata.

S&F casement windows with net & MS Grill single or multi shutter turn window are made out of UPVC multi-cavity frames sections of 60mm x 60mm x 2.5mm suitably reinforced and double multi-shutters division are made by using sash mullion having 50mm x 64mm x 2.5mm multi-cavity UPVC section, suitably reinforced with GI and shutters are made out of 50mm x 85mm x 2.5mm UPVC section, reinforced and welded in corners with EDPM gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges handles, stays etc complete. Mosquito mesh shutter is made out of UPVC extruded section of 61mm x 27mm x 2mm with GI channel of 1.2mm thick, welded in corners. Stainless steel wire mesh (Mosquito net) to be fitted in shutter with proper required accessories like hinges, MS grill of 12mm round or square bar are inserted in main frameas guard bar & screwed by hidden screwing system with powder coating and filled the gap between wall and frame with weather proof silicon sealant over backer rod of required size and of approved quality etc complete all as specified and directed. Note - The cost of float glass of glazed shutter thickness not less than 4.00mm and wiremesh of gauged shutter with stainless steel wire mesh 0.36mm dia with aparature 1.4mm shall deemed to be included in quoted rates and No extra payment will be made separately). Make/Manufactruer:- Fenesta/ Winkraft/ Yashpoly/ Duraplast/ Accura (Accucel).

S&F UPVC ventilators made out of UPVC multi-cavity frames sections of 60mm x 60mm x 2.5mm UPVC section, reinforced and welded in corners with TPE gaskets provision for glass and for air tight at frames and outer side of shutter with single glaze window shutters using suitable glass bead with perfect hardware like hinges, handles, stays etc complete. with MS grill of 12mm thick round/square shape bar duly painted with oil paint over a coat of red oxide are fabricated as per manufactruer and installed in UPVC frame section of 35mm x 35mm x 2mm by drilling and surveying system filled the gap between wall and frame with weather proof silicon sealant over backer rod of required size and of approved quality complete all as specified and directed Note - The unit rate quoted by contractor is deemed to be included cost of glass pan and stainless steel wire mesh and MS Grill etc all as specified and directed. Make/Manufactruer:- Fenesta/ Winkraft/ Yashpoly/ Duraplast/Accura (Accucel).

S&F stainless steel wire cloth 0.36mm nominal and average width of apreture 1.40mm and fixed with tinned tacks of stainless steel wire staple complete all as specified and directed.

S&F 10mm thick frosted toughned glass pan ISI joint togather for making partitions, cubical walls/door etc, fixed with Stainless steel screw 'L' & 'T' as jointing material and seal with transparant selicon gel, including 6 Nos of Brass CP 450mm long handles, suitable magnet and 3 Nos suitable 100mm long CP hinges to each frame less door shutters with fitting double action floor spring etc complete all as specified and directed.

S&F stainless steel sliding door bolt plate type 250mm long stove enamelled black with bright bolt not less 12mm dia bolt with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate, complete all as specified .

S&F of stainless steel butt hinges medium weight 100mm log fixed to steel /angle iron frame by welding, if required complete all as specified.

S&F continuous MS CP piano type hinges 30mm flap (when opened), bright finish or electrogalvanised complete all as specified.

S&F stainless steel handle, oval type, stove enamelled black 150mm long complete all as specified.

S&F stainless steel barrel tower bolts, stove enamelled black, with bright bolt 200mm long. all as specified.

S&F stainless steel handles cast type, anodised, 150mm size complete all as specified.

S&F stainless steel barrel tower bolts of extruded section with 150mm long bolt complete all as specified .

S&F rubber gasket for fixing glass pane all as specified.

S&F glass panes of plain sheet glass 5.50mm thick of ordinary quality in square exc 0.50 sqm each pane all as specified.

S&F in repairs 100mm size butt hinges, stainless steel ISI marked.

S&F in repairs drapery curtain rods mild steel powder coated polished 20mm dia including brackets, finials complete all as specified and directed.

M&L water proofing treatment on sunken floor consisting of the following operation including demolition/taking down old treatment :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) M&L PCC 1:2:4 type (BO) using 12.5mm graded crushed stone aggregate 50mm thick, finishing the surface even and smooth without using extra cement (iii) Applying a coat of Chemical Dr fixit Pidifin 2K (iv) Applying fibre mesh setting with chemical . (v) Final coating with Pidifin 2K and sprinking of sand Note:- All water proofing treatment will be executed by the authorisedrepresentative of Dr fixit.

M&L for plain cement concrete 1:5:10 type E2 (using 40mm graded crushed stone aggregate) as in sunken floor complete all as specified and directed.

Taking up or down steel water tubing and connections, including cleaning for refixing or removal to store 15mm bore pipe complete all as specified and directed.

M&L 15mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per the description of srl item No 60 above but except GI tubing.

Taking up or down steel water tubing and connections including cleaning for refixing or removal to store 20mm bore pipe complete all as specified and directed.

M&L 20mm bore GI tubing medium grade with all fittings and fixed complete to walls, ceiling or laid in floor complete all as specified and directed.

All as per the description of srl item No 63 above but except GI tubing.

Dismantling water tanks and removing to store exc 250 & n.exc 500 ltrs of capacity all as specified

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 500 liters including all accessories complete all as specified .

Dismantling water tanks and removing to store exc 500 & n.exc 1000 ltrs of capacity all as specified

S&F rotational moulded polyethylene water storage tanks ( cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I of capacity 1000 liters including all accessories complete all as specified .

S&F in repairs ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule 20mm and fixed complete all as specified.

S&F in repairs viterous China wash hand basin white, flat back size 550mm x 400mm including CI or Angle iron 50mm x 50mm x 6mm brackets one No CP fancy Pillar tap 15mm bore, one No 32mm dia CP waste coupling, one No 32mm dia PVC flexible waste pipe and one No 15mm bore 450mm long PVC connection complete all as specified and directed.

S&F in repairs vitreous china water closet squatting pan 'Orissa pattern' size 580mm x 440mm white with integral foot rests ‘P’ or ‘S’ trap front or back inlet including lime concrete complete all as specified and directed

S&F in repairs 10 litre capacity PVC low level flushing cistern with dual flush type‘ white’ with inlet, float valve including bracket with 32mm dia PVC waste/flush bend pipe appx 600mm long complete.

S&F in reapirs hand shower (helath faucet) with 8mm dia, 1 metre long flexible tube and wall hook with NRV (Black flow preventor) complete all as specified.

S&F in reapirs angular stop valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, all as specified..

S&F in repairs 15mm dia stopcock fancy type chromium plated with long shank and cup (concealed type) complete all as specified and directed.

S&F in repairs bib tap 15mm bore fancy type chromium plated all as specified.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white including fixing bolts, flushing cistern and flush pipe connection to trap and to flushing pipe inbend cluding provn of cement concrete beading complete all as specified and directed.

Supply only EWC seat cover black/white colour as approved of PVC closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed.

S&F in repairs table top wash basin white, flat bottom size 525mm x 415mm x 140mm of make Jaguar or equivalent excluding tap, chain, plug but including brackets, waste fitting 32mm dia brass chromium plated push type coupling with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed.

M&L for demolition of stone slab and tiles of any description or thickness in floor, aprons etc laid,bedded and pointed in any mortar all as sfcd and directed

M&L granite 18-20mm thick colour as approved ( of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms or making oval shape hole for fixing of wash hand basin and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite over 15mm thick screed bedor bedding layer in cement mortar 1:6 including moulding and polishing the edges complete all as specified and directed.

M&L granite 18-20mm thick colour as approved ( of any type) work (table rubbed and polished) in for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shed of granite including moulding and polishing the edges etc complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25mm thick over and including 15mm thick screed bed or bedding layer in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar over and including 10mm thick cement plaster in CM 1:4 finished even and faire for recieving kota stoen and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Removing of existing water proofing membrane, damage plaster, vegitation/plants, PCC, Tar-felt, loose particles and all forgin materials over the roof and shifting the debris from site to out-side defence area. Cleaning the surface & removing of dust, existing paints from wall & roof surface, finding visible crack Making V-groove by machine on crack area, providing & applying Polymer Bonding agent (1:2) & filling those grooves by modified cement & sand mortar 1:4 with WPM liquid (5% by wt. of cement). complete all as specified and directed.

Waterproofing coating-Providing & applying 1st coat WPM with brush/roller after mixing with cement at 1:1.5 (1 part of WPM and 1.5 part of cement & 2nd coat with an interval of 10 to 12 hrs by brush or roller to get average thickness of 1.5mm. The system will be allowed to air cure for 7 days covering including parapet both side wall. Note - The work is to be executed through authorised applicator.

Providing and fixing stainless steel as in railing, gril,etc fabrication as in any shape & size as directed by Engr-in-charge, of 16 gauge SS 304 food grade etc ,including fixing with necessary arrangement, complete as specified. including dismantling existing wooden ballsters as in gril & railing.

S&F in repairs WPC Jali 18mm thick any design and colour as directed.

S&F in repair frame work of WPC size of frame 75mm x 50mm all as per direction.

S&F in repair vertical venetian blinds of any colour or size as approved by Engr-in-Charge including all accessories fixed to wall all as directed.

S&F powder coated aluminium frame partition with frame of standard anodised aluminium section, of size 101.60mm x 44.45mm x 2mm, in vertical and horizonal members and glazed with 5mm thick tinted prelaminated partical board interior grade both side laminated or plain glass including joining cleats, glazing pins, rubber packing including dismantling of old partition complete all as secified and directed.

P.H. CONSTRUCTION CO. (BID ID -3068448)

M/S AADI ENTERPRISES (BID ID -3064572)

Rohan Construction Company (BID ID -3068725)

Paradise Interior (BID ID -3067902)

V M CONSTRUCTION (BID ID -3078066)