REPAIR TO ROOFING FLOORING JOINERY AND CEILING INCLUDING SANITARY FITINGS ETC AT MANASBAL UNDER GE 970

Amount

Taking down chowkhat with shutters (without taking off shutters from the frame) exc. 1.50 Sqm but n exc. 4 Sqm each complete and all as specified.

Taking down chowkhat with shutters (without taking off shutters from the frame) n exc. 1.50 Sqm each complete and all as specified.

S&F plain , solid , straight chowkhat and frames , wrought , framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd class Hard wood complete all as specified.

S&F factory made 35 mm thick 2nd class Hard Wood of plain framed panelled shutter ( two panels) with panels of timber flat on both sides feather edged), or of veneered particle board medium density or particle board with commercial face complete all as specified.

S&F 35mm th 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (b).

S&F 30mm th 2nd class soft wood for Glazed skeleton shutters for door open rebated and prepared to receive glass gauge etc. (with sash bars) edges of framing plain, chamfered or rounded , fitted with cuts and mitred beads for securing glass etc. size of members of shutter as specified in SSR Part- I section -8 clause 8.23 (b).

Factory made solid PVC door frame of size 50 x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as specified.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified.

S&F 200 mm long aluminium tower bolt, complete and all as specified.

S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy all as specified

S&F MS 100 mm size butt hinges medium wt. of cold rolled complete and all as specified.

S&F Aluminium handles, cast type anodised150mm size complete all as specified

S&F Aluminium handles, cast type anodised125mm size complete all as specified

S&F Mild steel pressed handles, oval type, stove enamelled black 150 mm size complete all as specified and directed all as specified

S&F Gate and shutter, Aluminium plate type II, hooks and eyes 150mm size complete and all as specified.

S&F in repair Mild Steel 300mm, ordinary rat tail rod pattern springs,incl roller and roller plate complete all as specified and directed by engineer in charge.

S&F mild steel wire cloth galvanized 0.56mm normal dia of wire and average width of aperture 1.18mm complete and all as specified.

S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in squares n exc. 0.50 Sqm in each panes complete and all as specified.

S&F in repairs 3mm thick sheet glass ordinary quality and glazing with oil putty in square n exc. 0.5 Sqm in each pane including hacking out of glass panes complete and all as specified.

M&L for PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in hold fasts, complete all as specified.

Preparing new surfaces of wood and wood based materials of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified.

M&L for 25mm thick Cement concrete 1:2:4 type B-0 using 12.5 mm graded stone aggregate in leveling course, benching etc, finished even & rough to receive cement mortar screed bed complete

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises.

M&L for Glazed ceramic coloured tiles 450x300x7mm thick on vertical surfaces such as skirting, dados and rises to steps etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all asspecified and directed.

M&L for Virified Ceramic tiles, dark shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match pattern and shade complete all asspecified and directed.

Machine cut kota stone 18 to 20 mm thick in flooring laid over 20 mm thick screed bed or bedding layer of morter and jointed in grey cement slurry mixed with pigment to match the slab including rubbing and polishing complete all as specified and directed by engineer in charge.

All as per item no 27 but in vertical surfaces complete all as specified and directed by engineer in charge.

Demolition of brick work built in cement or cement lime mortar complete.

M & L for Brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

Rendering 10 mm thick cement plaster in cement mortar 1:6 on faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete.

Rendering 5 mm thick cement plaster in cement mortar 1:3 on concrete surfaces in ceiling, finished fair & even complete.

Rendering 15 mm thick in cement plaster in CM 1:4 on faces of brick work or concrete surfaces, of cement, finished fair and even complete all as specified and directed.

Preparing new plastered or unplastered surfaces and applying two coats of oil bound distemper over a coat of primer complete all as specified.

Preparing new plastered or unplastered surfaces of ceiling and applying two coats of white wash complete all as specified.

M&L for preparing new plastered surface of walls and applying two coats of cement based paint complete all as specified and directed by Engr -in-Charge.

S&F in repair harrison curtain rails of anodised alluminium alloy with fixing brackets, stops rollers etc complete all as specified.

M&L for complete removal of existing treatment and applying two coats of cement base paint over a coat of wall puty complete all as specified and directed by Engr-in-Charge.

S & F in repair Gl frame work of grid size 605x605mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr-in-Charge.

M & L in repairs Gypsum 8mm thick plaster of paris celing (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or over metal frame work and reinforced with GI wiremesh (Fillets, metal frame work and GI wire mesh paid separetely) complete all as specified.

S & F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed

S&F in repairs Door closer aluminium (extruded section body) hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

S&F in repairs brass Mortice lock, 4 levers, vertical type, size 100 mm of Make : Godrej or equivalent, complete all as specified.

S&F in repair 15 mm bib tap ( fancy type) , long shank, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by the Engr-in-Charge .

Supply & fix in repair stop valve/angle valve 15mm bore, cast copper alloy, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and direct.

Supply & fix in repair two way stop valve/angle valve 15mm bore, cast copper alloy, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket with long shank (concealed type) complete all as specified and direct.

Dismantling of corrugated or semi corrugated sheets as in roof coverings complete all as specified.

S&F 0.63mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixing at a height of 6 to 8 mtr complete all as directed by Engr-in-charge.

M & L for Running welding in repairs exc 6mm but not exc 9mm thick complete all as specified.

M/S FAYAZ AHMAD BHAT