GE(U)/CHM-28/2022-23 REPAIR TO JOINERY FLOORING PLUMBING CEILING PERIODICAL SERVICES AND INTERNAL ELECTRIFICATION WORKS FOR ICU OT POSU RSC SURG-I TO III OFFR WD ETC AT 2ND 3RD AND 5TH AND TERRACE OF COMD HOSP UNDER AGE B/R (CH) OF GE (U) CHANDI

Amount

M & L cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, seismic and other similar bands, benching, coping, bed blocks, apex stones and kerbs etc including use of necessary form work all as specified and directed by Engineer - in - Charge .

Cutting chases, pinning in brick walls, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc; and cuttings chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth all as specified and directed by Engineer-in - Charge.

M & L Marble work of baroda green 18 to 20mm (table rubbed and polished) in steps, jambs, pillars, window cills, shelves, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over and including 15mm thick cement screed 1:4 all as specified and directed by Engineer - in - Charge .

M & L 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick cement mortar 1:4 all as specified and directed by Engineer - in - Charge .

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24 (a) ; supplied and fitted to chowkats all as specified and directed by Engineer - in - Charge .

S & F flush shutter 35mm thick solid core construction with particle board core and plywood face panels commercial type on both sides with lipping / frame to match all as specified and directed by Engineer - in - Charge.

Taking down chowkhats or frames with shutters (with out taking off shutters from the frame) not exceeding 1.50 Sqm each all as specified and directed by Engineer - in – Charge.

Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each and all as specified and directed by Engineer - in - Charge.

Taking down shutters of any description not exceeding 1.00 Sqm each all as specified and directed by Engineer - in – Charge .

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .

Taking down shutters of any description exceeding 1.00 Sqm and not exceeding 2.0 Sqm each all as specified and directed by Engineer - in - Charge .

S & F Solid PVC door frame factory made of size 50mmx 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube jointed , supplying and fixing in opening complete all as specified and as directed by Engineer-in-Charge.

Factory made solid panel PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and as directed by Engineer-in-Charge.

S&F PVC wall panelling, hollow cored, 5mm thick, decorative designs with smooths surfaces, fire resistant, water and heat proof, tongue and groove edge for easy assembly with all accessories such as U cap, end cap, tee, plugs, fillets and screws etc as per manufactures instructions and fixing complete all as specified & directed by Engineer - in - Charge.

S & F Aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .

S & F in repairs aluminium anodised barrel tower bolt of extruded section 150mm long all as specified and directed by Engineer - in - Charge .

S & F aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed by Engineer - in – Charge .

S & F as in repairs aluminium alloy anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheets cast or extruded section and fixing bolts of extruded section or cast aluminium alloy 300mm size all as specified and directed by Engineer - in – Charge .

S & F Butt hinges, 100mm size extruded brass, with brass hinge pin, bright polished and fixed, type B-11 all as specified and directed by Engineer - in - Charge .

S & F extruded aluminium alloy handles fabricated type, anodised 150mm size all as specified and directed by Engineer - in - Charge .

S & F in repairs extruded aluminium alloy handles fabricated type, anodised 150mm size all as specified and directed by Engineer - in - Charge .

S & F bright finished brass 100 mm mortice lock with four levers vertical type with necessary screws etc complete all as specified and directed by Engineer - in - Charge.

S & F in repairs curtain rods 20mm dia of anodised aluminium alloy with fixing brackets, stop rollers etc. all as specified and directed by Engineer - in - Charge.

S & F in repairs brass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge .

S & F brackets aluminium anodised fancy type for curtain rods complete all as specified and directed by Engineer - in - Charge .

S & F floor door stopper 150mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed by Engineer - in - Charge.

S&F in repairs door closer hydraulically regulated, aluminium (extruded section) body, designation No. 3, universal type suitable for door shutter upto 1000mm in width and of weight 61 to 80 kg complete all as specified and as directed by Engineer-in-Charge.

S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work for water tanks and similar work conforming to Fe-290 Gde E-165 all as specified and directed by Engineer - in - Charge.

S&F anodized aluminium frame with Powder Coating (minimum thickness of powder coating 50 micron) for doors, windows, ventilators, partitions etc., with one or more rebates including joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.

S&F Anodised aluminium door shutters with Powder Coating (minimum thickness of powder coating 50 micron), aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminium window and ventilator shutters, with Powder Coating (minimum thickness of powder coating 50 micron), side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.), hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and as directed by Engineer-in-Charge.

S & F anodized aluminium snap grid frame work for false ceiling size of grid 605 x 605mm all as specified and directed by Engineer - in - Charge.

M & L perforated particle board / tiles 12mm thick for insulation and acoustic purpose 60 x 60cm size fixed with screw to aluminium frame work or staples on snap grid in ceiling complete all as specified and directed by Engineer - in - Charge.

M & L pre-laminated particle board, 9mm thick interior grade, pre-laminated both sides with decorative choice laminations, fixed with screws to timber frame work complete all as specified and directed by Engineer - in - Charge.

Extra over Granite or marble slabs as in rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as directed. all as specified and directed by Engineer - in - Charge.

M & L 25 mm thick Cement Conrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge .

M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge.

M & L vitrified ceramic light shade coloured tiles with matt finish, 10 mm thick ( square/ rectangular ) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white cement paste pigmented to tile shade over and including 15mm thick cement and sand screed (1:4) complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 38 here-in-before but on vertical surface such as skirting, dado over and including 10mm thick cement sand plaster (1:3) etc complete all as specified and directed by Engineer - in - Charge.

Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge.

M & L rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge .

Taking down cement plaster/ terrazo finish on brick wall including racking out joints, hacking for keys scrubbing down with water all as specified and directed by Engineer - in - Charge.

M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .

M & L one coat of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .

M & L two coats of distemper oil emulsion on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of distempered surfaces complete all as specified and directed by Engineer - in - Charge .

M & L two coats of distemper oil emulsion over a coat of primer and wall putty (Asian / JK / Birla), preparatory to distempering, on newly plastered surfaces of walls including preparation of surfaces all as specified and directed by Engineer - in - Charge.

M & L two coats of distemper oil emulsion over a coat of wall putty (Asian / JK / Birla), preparatory to distempering on old surfaces after complete removal of existing treatment all as specified and directed by Engineer - in - Charge.

M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over plastered or unplastered or concrete surfaces including preparation of surfaces by removal of existing treatment complete all as specified and as directed by Engineer-in-Charge.

M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .

M & L providing two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .

M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .

S & F 15mm bore medium grade steel tubes galvanised with all fittings and fixed complete to walls & ceiling or laid in floor all as specified and directed by Engineer - in – Charge .

Taking down steel tubing 15mm bore and connections including cleaning for refixing/ removal complete all as specified and directed by Engineer - in – Charge.

Dismantling water tanks of capacity exceeding 500 litres and not exceeding 1000 litres all as specified and directed by Engineer - in - Charge.

S & F rotational moulded polythene water storage tanks, white colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I of capacity 1000 Litres all as specified and directed by Engineer - in - Charge .

S & F in repairs Concussive push button taps of cast copper alloy screwed for iron pipe and fixed 15mm bore all as specified and directed by Engineer - in - Charge .

S&F in repair bib taps 15mm bore dia, fancy type, cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe all as specified and directed by Engineer – in – Charge .

S&F in repairs Pillar taps 15mm bore dia, fancy type, cast copper alloy with capstan heads chromium plated screwed down hidh pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe and fixed all as specified and directed by Engineer – in – Charge .

S&F in repairs 15mm bore central hole basin mixer chromium plated brass for mixing hot & cold water screwed down for iron pipe and fixed as specified and directed by Engineer – in – Charge .

S & F in repairs 15mm bore stop valve, cast copper alloy screwed down, fancy type, chromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed all as specified and directed by Engineer - in – Charge.

S & F in repair ball brass valve 20mm bore dia high pressure with polythene float and fly nuts complete screwed with iron pipe and fixed all as specified and directed by Engineer - in - Charge .

S & F as in repairs 32mm size waste fitting, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shank and fly nuts etc complete all as specified and as directed by Engineer-in-Charge.

S & F as in repairs push tap 15mm bore any colour high pressure of PTMT screwed for iron pipe and fixed .(Minimum weight 47gms) all as specified and directed by Engineer - in - Charge .

S & F as in repairs push tap for urinals 15mm bore any colour high pressure of PTMT screwed for iron pipe and fixed .(Minimum weight 50gms) all as specified and directed by Engineer - in - Charge .

S & F grating round 125mm with waste hole of PTMT (minimum weight 40 gms) all as specified and directed by Engineer - in - Charge.

S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm all as specified and directed by Engineer - in – Charge.

S & F in repairs PVC connection 15mm size with PTMT nuts of length 600mm all as specified and directed by Engineer - in – Charge.

S & F CI soil waste and vent sand cast pipe 100mm bore in any length with or without ears with cement joints fixed to walls all as specified and directed by Engineer - in - Charge.

S & F CI soil waste and vent sand cast pipe 75mm bore in any length with or without ears with cement joints fixed to walls all as specified and directed by Engineer - in - Charge.

S & F 100mm bore bends, diminishing pieces or tapers all as specified and directed by Engineer - in – Charge.

S & F 75mm bore bends, diminishing pieces or tapers all as specified and directed by Engineer - in – Charge.

S & F PVC pipes (SWR) single socketed with rubber ring joints 110mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

S & F PVC pipes (SWR) single socketed with rubber ring joints 75mm dia laid in trenches or in floors complete all as specified and directed by Engineer - in - Charge .

S&F PVC (SWR) bends any radius bore of 110 mm all as specified and directed by Engineer - in - Charge

S&F PVC (SWR) bends any radius bore of 75 mm all as specified and directed by Engineer - in - Charge

M & L as in repairs Brass chromium plated bottle trap 32mm bore for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed all as specified and directed by Engineer - in - Charge .

M & L cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in cement concrete type B – 1 (1:2:4) all as specified and directed by Engineer - in - Charge.

S & F in repairs vitreous china wash down water closet pan (Pedestal Pattern), white including plastic water closet seat cover, black, closed pattern with flat bottom with mild steel chromium plated or aluminised hinging device and fixing with all joints to WC pan all as specified and directed by Engineer - in - Charge .

S & F in repairs vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime: 2 sand : 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing including connection to flushing cistern and flush pipe to WC pan all as specified and directed by Engineer - in - Charge .

S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve and float including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed by Engineer - in - Charge .

S & F in repairs ball valve PVC with aluminium connecting rod and polyplast float for low level flushing cistern, complete all as specified and directed by Engineer - in - Charge .

S & F in repairs vitreous china wash basin, white, flat back, size 550x400mm including waste fitting brass chromium plated and fixing with new brackets including cutting and pinning in ends of brackets complete all as specified and directed by Engineer - in – Charge .

S & F as in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long all as specified and directed by Engineer - in - Charge .

S & F in repairs stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen with plug, washers, waste fittings, waste pipe, cast iron cantilever brackets, over all size 915mm x 460mm with bowl size 410mm x 330mm x 160mm with waste pipe PVC 40mm dia all as specified and directed by Engineer-in-Charge.

S & F as in repairs 32mm dia flush pipe of polyethylene of low or high density for low level flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S & F health faucet with tube & wall hook chromium plated brass fixed to 15mm size pipe complete all as specified and directed by Engineer - in - Charge.

S & F as in repairs PVC flexible waste pipe of standard length 25mm dia. with PVC cap suitable for waste coupling 32/ 40mm all as specified and directed by Engineer - in - Charge .

S & F as in repairs toilet paper holder, recessed type (stainless steel) fixed to wall with chromium plated brass screws complete all as specified and as directed by Engineer-in-Charge.

S & F in repairs Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device all as specified and as directed by Engineer-in-Charge.

S & F as in repairs soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge.

S & F toilet cabinet PTMT wall mounted with mirror of size 600 x 450mm as per sample approved by GE complete all as specified and directed by Engineer - in – Charge.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc.all as specified and directed by Engineer - in - Charge .

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified and directed by Engineer - in - Charge.

Dismantling of cast iron pipes jointed in cement mortar and taking out from trenches / floors etc.100 / 75 mm bore all as specified and directed by Engineer - in - Charge .

Taking down aluminium / Copper point wiring (light, fan, socket or power, bell complete fittings such as sockets, ceiling roses, pendants, battens/ conduits (as required), holders, regulators and making good the disturbed surfaces of walls, floors, ceiling etc all as specified and directed by Engineer - in - Charge.

M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in and including PVC casing and capping double locked box type with accessories fixed on surface of walls / ceiling by means of PVC sleeves/dash thru fasteners with cadmium plated screws all as per IS including sunk type MS pressed steel terminal box for mounting fittings like switches, sockets, fan regulators etc with 3mm thick plastic laminated sheet top cover etc including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.

All as per Srl item No. 99 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core stranded / solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.

M & L point wiring complete with 1.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable drawn through in existing conduit including 1.5 Sqmm single core stranded / solid copper conductor 1100 volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly with copper lugs inserted in existing MS boxes for One light/bell point/fan point controlled by one, one way switch all as specified and directed at site by Engineer – in – charge.

All as per item No. 101 here in before but for socket out let 3 pin 5 amp on same board all as specified and directed by Engineer - in - Charge

All as per item No. 101 here in before but for socket out let 3 pin 5 amp on independent board all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 101 here-in-before but with 2.5 Sqmm single core multi stranded copper conductor of 1100 volts grade PVC FRLS insulated and sheathed cable for one multipurpose switch socket outlet 6 pin 5/6 Amps and 6/16 Amps on independent board including 2.5 Sqmm single core solid copper conductor 1100volts grade PVC insulated and sheathed cable as earth continuity conductor to common earth and connecting to earth dolly.

S & F Modular switch 1 way 6A, 1 module, one way all as specified and directed by Engineer - in – Charge.

S & F as in repairs Modular switch 1 way 6A, 1 module, one way all as specified and directed by Engineer - in – Charge.

S & F Modular switch 1 way 16A, 1 module, one way all as specified and directed by Engineer - in – Charge.

S & F as in repairs Modular switch 1 way 16A, 1 module, one way all as specified and directed by Engineer - in – Charge.

S & F Modular Bell push 6A, 1 module, single pole one way, all as specified and directed by Engineer - in – Charge .

S&F electric call bell/ buzzer, AC, 230 volts, single pole, complete all as specified and as directed by Engineer-in-Charge.

S&F modular socket, 6A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.

S&F as in repairs modular socket, 6A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.

S&F modular socket 6A/16A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.

S&F as in repairs modular socket 6A/16A - 2/3 pin combined 2 module all as specified and directed by Engineer-in –Charge.

S&F modular fan step regulator, 120W - 2 module all as specified and directed by Engineer-in –Charge.

S&F modular White cover plate with frame, 3 module all as specified and directed by Engineer-in –Charge.

S&F as in repairs modular White cover plate with frame, 3 module all as specified and directed by Engineer-in –Charge.

S&F modular White cover plate with frame, 4 module all as specified and directed by Engineer-in –Charge.

S&F modular White cover plate with frame, 6 module all as specified and directed by Engineer-in –Charge.

S&F as in repairs modular White cover plate with frame, 6 module all as specified and directed by Engineer-in –Charge.

S&F modular White cover plate with frame, 8 module all as specified and directed by Engineer-in –Charge.

S&F modular Metal flush box 3 module all as specified and directed by Engineer-in –Charge.

S&F modular Metal flush box 4 module all as specified and directed by Engineer-in –Charge.

S&F modular Metal flush box 6 module all as specified and directed by Engineer-in –Charge.

S&F modular Metal flush box 8 module all as specified and directed by Engineer-in –Charge.

S & F as in repairs switch piano flush button single pole one way 5 Amp all as specified and directed by Engineer - in – Charge.

S & F as in repairs switch piano flush button single pole one way 15 Amp all as specified and directed by Engineer - in – Charge.

S & F as in repairs socket outlet 2 in 1, 3 pin, 5 Amps, flush type all as specified and directed by Engineer-in –Charge.

S&F as in repairs socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed by Engineer-in-Charge.

S & F as in repairs switch socket combination 2 in 1, 5 Amp flush type all as specified and directed by Engineer – in - Charge .

S&F as in repairs switch socket combination 5 in 1, and 5/15 Amps, flush type complete all as specified and as directed by Engineer-in-Charge.

S & F MCB distribution board of sheet metal single pole and neutral 12 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.

S & F MCB distribution board of sheet metal single pole and neutral 8 way, double door, with 200 Amp rated bus bar 240 volt all as specified and directed by Engineer-in- Charge.

S & F MCB distribution board of sheet metal single pole and neutral 2 way, single door, without bus bar 240 volt all as specified and directed by Engineer-in- Charge.

S & F sheet metal enclosure distribution board triple pole and neutral 4 way, double door, with 200 Amp rated bus bar 440 volt all as specified and directed by Engineer-in- Charge.

S & F sheet metal enclosure distribution board, vertical type, triple pole and neutral 4 way, double door with 200 Amp rated bus bar 440 volts, suitable for TP/FP MCCB ‘A FRAME’ (MCCB’s /MCB’s shall be paid separately) all as specified and directed by Engineer-in- Charge.

S & F sheet metal enclosure distribution board, vertical type triple pole and neutral 12 way, double door with 200 Amp rated bus bar 440 volts, suitable for TP/FP MCCB ‘A FRAME’ (MCCB’s /MCB’s shall be paid separately) all as specified and directed by Engineer-in- Charge.

S & F MCB single pole 6 to 32 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer– in– Charge.

S & F MCB single pole 40 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer– in– Charge.

S & F MCB single pole & neutral 40 Amp 240 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge.

S & F MCB triple pole 63 Amp 440 volt with rupturing capacity not less than 10 KA all as specified and directed by Engineer – in – Charge .

Supply and fixing single pole and neutral enclosures with two pin and earth plug and socket complete with one single pole MCB 240 V 20 Amps all as specified and directed by Engineer - in - Charge.

S & F ceiling rose 65 x 50mm three terminals PVC/ polycorbonate, isolated body all as specified and directed by Engineer - in - Charge .

S & F 'Rigid non-metallic PVC casing and capping 25mm size inclusive of all tees, bends, elbows, and fixing accessories etc. including all as specified and directed by Engineer-in –Charge.

M&L self ballasted retrofit LED tubes with PC cover/ PC body 20W with high lumens 6500K (4') complete and connecting complete all as specified and directed by Engineer-in-Charge.

M&L heavy duty batten pre coated CRCA body, suitable for retrofit LED 1X18/20W LED tube and connecting complete all as specified and directed by Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5mtr below normal ground level, connected to and including galvanized earth lead wire 4mm dia by means of GI bolts, nuts, check nuts and washers and connected other end to main board duly protected by GI pipe 15mm bore, medium grade, earth plate surrounded by packed layer of coal dust and common salt 15cm thick all around bottom and top watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate No. 3 of SSR Part – I and connecting to earthing test point, main switch board and testing on completion including CI cover, frame and PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in earthing pit with CI cover and frame including necessary earth works etc, all as specified and directed by Engineer - in – Charge. Note:- 1. PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode of the earth pit and pipe for watering shall be provided in slanting manner.

M & L as in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 6 Sqmm multi stranded copper conductor drawn through existing conduit/ casing and capping with and including PVC FRLS insulated 6 Sqmm multi stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in – Charge Notes : 1. PVC casing capping/ conduit, if required extra, shall be measured separately under relevant item. 2. PVC cables two single core and one single core of sizes as mentioned will considered as one unit.

M & L as in repairs submain wiring with two single core cables PVC FRLS insulated unsheathed 4 Sqmm stranded copper conductor drawn in existing conduit with and including PVC FRLS insulated 4 Sqmm stranded copper conductor cable as earth continuity conductor and connecting complete all as specified and directed by Engineer - in – Charge. Notes : 1. PVC casing capping/conduit, if required extra, shall be measured separately under relevant item. 2. PVC cables two single core and one single core of sizes as mentioned will considered as one unit.

S&F in repairs MCCB, (AC 415 V), adjustable thermal (70%-100%) & adjustable magnetic setting, three pole, 160 Amps, breaking capacity 25 KA complete all as specified and as directed by Engineer-in-Charge.

Supplying and fixing as in repairs surface mounted of size 2'x2' LED 36 watt Luminaire equiped with CRCA powder coated housing, antiglare diffuser with separate energy electronic driver of capacity 36 Watt minimum, 5700 K, including fixing arrangement with existing complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs indoor LED batten extruded thermoplastic body 4 feet with milky diffuser including 18 Watt 6500K LED strip including driver, accessories to fix the same with existing wall and all connected accessories as per manufacturers recommendation complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs of surface/recess mounted slim square type led panel with die cast aluminium housing and smooth powder coated finish with antiglare UV stabilized diffuser and separate energy efficient eletronic driver having wattage 12 watt LED panel light, 6500k, having dimensions 120x120mm and making connection accessories complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs LED Luminaire 36 Watt, 6500K suitable for armstorng/ grid ceilling, of size 2'x2' with its super bright LED, including LED strip, recess mounted with drivers and others accessories as per manufactures recommendation including fixing arrengement complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs decorative wall mounted Bed side light with SS base & white frosted glass having Up & down arrangement including 9 watt LED lamp complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs surface/ recess mounted circular LED down lighter with die cast aluminium housing and smooth powder coated finish with anti glare UV stabilized diffuser and separate energy efficient eletronic driver with 12 Watt LED lamp, 6500K and making connection accessories complete all as specified and directed by Engineer - in – Charge.

Supplying and fixing as in repairs recessed backlit panel luminaire of size 1' x 4' having white powder coated CRCA housing, antiglare diffuser with separate energy electronic driver of capacity 36 Watt 5700 K including fixing arrangement with existing complete all as specified and directed.

chahalbuilders

KUNDRA CONSTRUCTIONS