GE/SRA/T-33/2025-26

Amount

M&L Removing Complaint of Blockage (viz Blockage in Bath, Kitchen, WC & Drainage in Traps/Line from Trap to 1st Manhole, Cleaning of Manhole) by deploying Trades Mens as per Stipulated Time Frame from 9.00 AM to 5.00 PM and maintaining proper Records of COMPLETED and PENDING Complaints including updating status of Complaints through SMS/Manually for OTM AND SINGLE LIVING AREA IN DOMESTIC AREA and ZHOPRA COMPLEX of AF STATION SIRSA, complete all as specified and as directed. NOTES :- (a) If the Complaint is not attended / removed within a Day, Recovery @ Rs 50/- per day per complaint will be levied on the Contractor for non-complelion of the Complaint. (b) It is mandatory on the Part of Contractor to deploy minimum 02 No. of Safaiwala/Mazdoor with requisite T&P throughout the Entire Contract Period. However required manpower and T&P, if required more to meet the requirement as mentioned in BOQ Item is also to be arranged by the Contractor at his own Arrangements and Cost. Quoted Rates shall be deemed to include this factor and nothing Extra will be admissible on this account other than Quoted Rates for BOQ Item. In case of any dispute on this factor, the decision of Accepting Officer shall be final, conclusive and binding.

M&L for Cleaning of Choked Sewer Lines of size 100mm Dia but not exc 150mm dia at any depth, Manually and Making Sewer Line Functional complete including Working Under Foul Condition and depositing the sludge, rubbish, etc. off the Premises outside the MOD/AF Land or Sewage Treatment Plant, complete all as specified and as directed. NOTE : If the Complaint is not attended within a Day, Recovery @ Rs 50/- per day per complaint will be levied on the Contractor for non-complelion of the Complaint.

All as per Item No. 02 above but for cleaning of sewage line of size 200 mm dia but not exc 250 mm dia

Cleaning of Manhole chamber of any size, upto depth 1.0 metre each, manually, removing the manhole cover and taking out all muck / sludge / silt / mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge / debris / rubbish out of MOD land complete all as specified and directed. (NOTE: This item shall be executed only under emergency requirement)

Cleaning of Manhole chamber of any size, upto depth 1.0 metre each, by mechanical means, removing the manhole cover and taking out all muck / sludge / silt / mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge / debris / rubbish out of MOD land complete all as specified and directed.

Cleaning of Manhole chamber of any size, of depth exceeding 1.00 metre but not exceeding 3.0 metre each, by mechanical means, removing the manhole cover and taking out all muck / sludge / silt / mud, liquid etc under any position including foul condition and cleaning the inlet and outlet with water, placing back the manhole cover in position and disposing off the sludge / debris / rubbish out of MOD land complete all as specified and directed.

M&L Dewatering Sludge from Soakage Wells by Pumping out as required to keep the Complete Sewage System in order and as to avoid any Over flowing of Sewage Water including removing of Soak Well water pumped out as such out side of Defence Land by means of Pumps and Tankers (Capacity of Water Tanker shall be minimum 5000 Litres) as required including Operating and Supervisory Staff(s) so as to keep the whole Station area Pollution Free, complete all as specified and as directed. NOTE : In/out register for tanker should be updated at the Guard Room by the contractor and signature of securtiy Guard and contractor are mandatory for payment of the item.

Demolition Cement Concrete (reinforced) of any description (above or below Ground Level) and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed. (NOTE: Reinforcement of the demolished RCC members shall be measured under Sch of Credit.

M&L Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs supported on Walls, etc., top surface finished Even and Smooth without using Extra Cement, complete all as specified and as directed. NOTE : Formwork & Reinforcement will be Measured and Paid separately under relevant Items.

M&L for Use and Waste of Formwork to Soffits of Suspended Slab and similar work not exc. 200mm thick, Fair Finished surfaces, complete all as specified and as directed.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in Slabs, Manhole Cover Slabs, etc., set in Cement Mortar 1:4, with necessary formwork including dismantling and removal of damaged precast slabs etc complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid separately under relevant Item. Old reinforcement will be measured under Sch of Credit.

M&L Pre-cast Reinforced Cement Concrete 1:2:4 (20mm graded stone aggregate) in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to matchin Slabs, Manhole Cover Slabs, etc., with necessary formwork including dismantling and removal of damaged precast slabs etc complete all as specified and as directed. NOTE : Reinforcement will be Measured and Paid separately under relevant Item. Old reinforcement will be measured under Sch of Credit.

M&L TMT Bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for Columns, hooking Ends and binding with and incl Mild Steel Wire (annealed) not less than 0.90 mm dia, complete all as specified and directed.

Demolition Brick work built in Cement Mortar and in any Position including all Quoins, Arches and Pillars, etc. and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

M&L for Brick Work with Sub Class 'B' Bricks (Old Size Bricks), Straight or Curved on Plan exc. 6.0 Metre mean Radius, built in Cement Mortar 1:6, complete all as specified and as directed.

Taking down cement plaster on wall of any description hacking for key scrubbing down with water including racking out joints and removal of debris outside AF land and disposed off complete all as specified and as directed..

M&L for 10 mm thick plastering in cement mortar 1:4, on brick or concrete surfaces, finished even and smooth without using extra cement, for external surfaces (not exc 10m height) including necessary scaffolding etc complete all as specified and directed.

M&L for 15 mm thick plastering in cement mortar 1:4, on brick or concrete surfaces, finished even and smooth without using extra cement, for external surfaces (not exc 10m height) including necessary scaffolding etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces and applying two coats of exterior acrylic emulsion paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade over and including a coat of suitable exterior primer, applied to new wall surfaces of any description, over 10cm width or girth not otherwise described, not exc 10m height incl necessary scaffolding complete all as specified and directed.

M&L Rough Cast Plaster on Brick Walls upto double storey consisting Under Coat of Cement and Sand Mortar 1:3 not less than 10mm thick and while it is still in Plastic state the Rough Cast Mixture consisting of Crushed Stone or Fine Gravel mixed with Coarse Sand and Cement in the ratio 1:1:1 shall be applied and finish Even, complete all as specified and as directed.

M&L preparing newly Rough Cast plastered surfaces of Walls and applying two Coats of Exterior Emulsion Paint (having anti-dust & anti-algae properties) duly mixed with stainer to achieve approved Tint/shade over and including a coat of suitable exterior Primer complete all as specified and as directed.

M&L Cement Concrete 1:2:4 (20mm graded stone aggregate) as in Coping, Bed Plates, Holdfast, Bed Block etc including necessary formwork and weathering, slightly rounded or chamfered angles and throating, finished even and smoouth without using extra cement complete all as specified and as directed.

Demolition & breaking up Drain Pipe 150mm dia (Salt Glazed Ware, AC or Reinforced Concrete) set in Cement Mortar, alongwith concrete bedding and removing debris, etc. to Outside of MD/AF Land, complete all as specified and as directed.

Supply and laying Reinforced Concrete Pipes 150mm (internal dia), Class NP-3, laid in Trenches on Concrete Bed, to required Slope, jointed with jute & cement mortar 1:1, complete with collars all specified and as directed.

M&L Cement Concrete 1:3:6 (40mm graded stone aggregate) as in Concrete Bed to Drain Pipes of 150mm bore (dia), including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and as directed.

Excavating in Trenches, not exc. 1.50 Metre wide and not exc. 1.50 Metre in depth; for Foundation, etc. or for Shafts, Wells, Cesspits, Manholes, Pier Holes, etc. not exc. 10 Sqm on Plan and not exc. 1.50 Metre in depth and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, filling in approved Soft/Loose Soil including spreading leveling, watering and well ramming in layers not exc. 25 Cm thick, complete all as specified and as directed.

Removing Excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point including spreading over ground, complete all as specified and as directed.

S&F in repairs PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, laid on floors, trench etc complete all as specified and directed.

S&F in repairs PVC (SWR) 75mm bore (dia) Soil, Waste and Ventilating Pipe, single socketed, in any length with PVC Joints, with or without Ears, fixed to Walls with PVC clips, complete all as specified and directed.

S&F in repair PVC (SWR) 110mm bore (dia) Soil, Waste and Ventilating Pipe, Single Socketed, in any length with Rubber Ring Joints, fixed to Walls with PVC Clips, complete all as specified and directed.

S&F in repair PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 75mm bore OD, jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F in repair PVC (SWR) Bends (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 110mm bore OD, jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F in repairs PVC (SWR) single T (any radius), Diminishing Pieces or Tapers (larger bore measured) Fittings for PVC (SWR) Pipe 110mm OD, jointing with Solvent Cement and fixed, complete all as specified and as directed.

S&F in repairs PVC (SWR) Floor Trap 75mm bore (dia) with Grating including jointing to Waste Pipe fixed in Cement Concrete 1:2:4 (20mm graded stone aggregate), complete all as specified and as directed.

M&L Cutting into existing Manholes for Connecting New Drain Pipes of 150mm (Internal dia), Making Good to Pipe and rendering, cutting out existing Benching for and forming Branch Channel (½ Round or ¾ Section) in Cement Concrete 1:2:4 (20mm graded stone aggregate), Smooth Finished and Reforming Benching as required, complete all as specified and as directed.

S&F in repairs Vitreous China White Squatting Pan of size 580x440mm, Orissa Pattern with Integral Foot Rests, ‘P’ or ‘S’ Trap, providing Joints between Flush Pipe and Socket of WC Pan, Cones, India Rubber (nozzles of WC Pan) including provision Concrete Bedding and Making Good to disturbed surfaces complete all as specified and directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, with 'P' or 'S' trap front or back inlet, fixing bolts (except flushing cistern and flush pipe) including plastic water closet seat cover (white) and mild steel chromium plated or aluminium hinging device complete all as specified and directed. (NOTE: Quoted rate shall be deemed to include for the cost of PVC seat cover)

S&F in repairs PVC Flushing Cistern 10 Litre capacity White, Low Level, Valve less, Syphonic action type with Inlet, Ball Valve, Float and Handle, PVC flush Pipe 32mm bore (dia) of suitable Length, a pair of Cast Iron Bracket/ Erecting Stand duly painted including cutting and pinning in Ends, Making Good Disturbed Surfaces in cement mortar 1:3, complete all as specified and as directed.

S&F in repair PVC Connection Pipe 15mm size and 60 Cm in length with Adopter Nuts of PVC, complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description in rafters, purlins and wind ties wtc and removal from site complete all as specified and directed. NOTE: If the planned MS structure, truss, etc is different from the existing structure, proper measurement of the existing structure to be dismantled shall be recorded in MB duly signed by the Engineer-in-Charge.

Dismantling structural steel work of any description in rafters, purlins and wind ties etc and removal from site complete all as specified and directed. NOTE: If the planned MS structure, truss, etc is different from the existing structure, proper measurement of the existing structure to be demolished, shall be recorded in MB duly signed by the Engineer-in-Charge.

M&L for mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-290, (Gde E- 165) complete all as specified and directed. (NOTE: Quoted rate shall deemed to include for the cost of all GI anchor bolts & nuts, screws, rawl plugs, etc as required for fixing the grills/MS structure to walls or openings. No claim shall be entertained during currency of work.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 or RHS/SHS Sections conforming to IS 4923:1997 grade YST 210 complete all as specified and directed. (NOTE: Quoted rates shall be deemed to include for cutting to dead length where required, notching, drilling, fitting, riveting and/or welding or connecting with bolts and nuts (including rivets or bolts and nuts), providing and fitting angle cleats, fish plates, gusset plates etc., also for wedging, plumbing, truing up and fixing complete. No extra measurement for the same will be considered except for base plates at top & bottom of columns)

S&F 3mm thick translucent Polycarbonate sheet, embossed design, density 1.2 kg/m3, in any colour, as in wall claddings, gates, etc including necessary side or end laps duly fixed with coach screws and washers complete all as specified and directed.

M&L for preparing New or previously untreated Steel and Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint (First quality) over a Red Oxide Zinc Chrome Primer, complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting any gauge, thickness, including nainital or similar pattern roof covering & removing off the site complete all as specified and directed.

S&F 0.50 mm thick TCT (total coated thickness) pre-coloured galvalume sheets with minimum base metal thickness of 0.45 mm, single skin high rib/multi rib profile galvalume sheeting having 1000-1020 mm width and 28-30 mm high crest @ maximum 250-255 mm pitch (centre) with sheets manufactured out of 0.50 mm this TCT (total coated thickness) high tensile galvalume sheets having tensile strength 550 MPA with 18-20 micron top coat over 5 micron primer and 8-10 micron alkyld backer zinc aluminium alloy AZ-150, sheets having a dip metallic zinc (43.5%0 aluminium (55%) & silicon (1.5%) with total mass coating of 150 gms/sqm on both sides, having wide pans with minimum 3 small stiffening ribs for effective water shedding and special male/female ends with full return legs on laps for purlin support and fixed as per existing profile of roof complete all as specified and directed.

S&F in repairs precast cement concrete jallies or louvers, of approved design, 40mm thick (measured solid), type B-0 ,1:2:4 (using 12.5 mm graded broken stone aggregate), including all mouldings but excluding frame, set in cement mortar 1:4, complete all as specified and as directed. (NOTE: In the case of louvres and jallies, thickness refer to the thickness of louvres and jallies and not to the thickness of frame. The superficial areas of louvres and area of opening filled by jalli shall be measured in the case of louvres and jallies.

M&L for Dismantling Stone Slabs and/or Tiles of any description or thickness in Floors, Aprons, etc. laid, bedded and pointed in Cement Mortar, removal of debris outside AF land, cleaning of area to remove dust, loose particles, washing with water complete all as specified and directed.

M&L for providing Granite (of any type) Slab, table rubbed and polished, 12-14mm thick, machine cut, in wall lining (veneering to walls), fixed over and including 10 mm thick cement screed (1:3) and jointed with suitable stone adhesive (as per manufacturer's recommendations), slabs fixed with spacers to provide uniform joints and after setting of adhesive, removing the spacers and filling the joints with suitable epoxy grout and pointed with grout complete all as specified and directed. NOTE : Cost of cement screed bed, tile adhesive and epoxy grout shall deemed to be included in the quoted rate.

S&F in repairs galvanized 2 strand steel barbed wire fencing conforming to IS : 278, with 2.24 mm dia. barb wire conforming to IS : 280 with zinc coating as per IS : 4826, barbed with 2 mm dia. barbs at 75 mm spacing and straining and fixing to any type of standard rails/RCC fencing posts straining bolts, including securing or tying at crossing with and fixing of galvanized mild steel wire, staples or steel pins etc., incl dismantling of existing barbed wires complete all as specified and directed. (Note: - Each line of wire will be measured)

Demolition Cement Concrete (un-reinforced) of any description in Ground Floors, Pavings, etc. not exc. 150mm thickness (above or below Ground Level) and removing debris, etc. to Outside MD/AF Land, complete all as specified and directed.

M&L for Cement Concrete 1:3:6 Type D2 (40mm Graded Stone Aggregate), 75 mm thick, as in Sub-base of floor, path, hardstanding etc complete all as specified and as directed.

M&L for providing outdoor type heavy duty ceramic Floor (Paver) Tiles, 300 x 300 x 10mm thick, having geometric patterns, Anti-skid type, Impact Resistant, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade, laid over and including 15mm thick Screed or Screed Bed in Cement Mortar 1:4, complete all as specified and directed. NOTE: Cost of Cement Screed Bed shall deemed to be included in the quoted rate.

M&L for providing cement concrete coloured chequered tiles 300x300x22-25mm thick, as per approved shade & quality, set, jointed and pointed in neat cement slurry in floors, with grey cement and pigment laid over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified & directed. NOTE : Quoted rate shall deemed to inlude for the cost of Cement Screed Bed.

M/s Shree Bala Ji Construction Company (BID ID -3352963)