AMC for Electrical Installation work of WBUAFS at K.B. Sarani,Kolkata-700037, Belgachia , Kolkata including Hostel and Quarters during CFY 2024-25- Repair and renovation EI work and replacement of LED street light on existing pole.

Amount

Supply & delivery of BIS approved new genaration energy saving ,environment frindly and long lasting ,heat resistant 250V, 100W (Minimum) LED Flood light (CT- 5700K-6000K) with IP-66,IK10 individual Secondary Optics Peanut Lens and Separate Toughned Glass Diffuser, Potted Driver to be used, Efficacy > 110 LPW (minimum) output fittings, as directed by EIC. Fittings should be included of --i) 4 KV internal & 10 KV external SPD ii)Driver wattage should be greater than or equal to ratted fitting wattage) [Make:WIPRO equivalent spec of Lighting Technology(LT)/Philips/Crompton] ( Driver Make : Xitanium / Philips-signify / Wipro) ( LED Chip Make : Nichia / Cree / osram/lumiled)

Supply & delivery of BIS approved new genaration energy saving ,environment frindly and long lasting ,heat resistant 250V, 90W (Minimum) LED street light (CT- 5700K-6000K) with IP-66, individual Secondary Optics Peanut Lens and Separate Toughned Glass Diffuser, Potted Driver to be used output fittings & Efficacy > 110 LPW, as directed by EIC. Fittings should be included of --i) 4 KV internal & 10 KV external SPD ii)Driver wattage should be greater than or equal to ratted fitting wattage). [Make:wipro-Dot/equivalent spec of Lighting Technology(LT)/Philips/Crompton ]. ( Driver Make : Xitanium / Philips-signify / Wipro) ( LED Chip Make : Nichia / Cree / osram/lumiled)

Supply & delivery of BIS approved new genaration energy saving ,environment frindly and long lasting ,heat resistant 250V, 35W (Minimum) LED postop light (CT- 5700K-6000K) with IP-65, , Potted Driver to be used output fittings & Efficacy > 100 LPW, as directed by EIC. Fittings should be included of --i) 4 KV internal & 10 KV external SPD ii)Driver wattage should be greater than or equal to ratted fitting wattage). [Make:Philips-BGB200 LED 35 CW PSU GR CPC SPD /wipro /equivalent spec of Lighting Technology(LT)/Crompton]. ( Driver Make : Xitanium / Philips-signify / Wipro) ( LED Chip Make : Nichia / cree / osram/lumiled)

Fixing only Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure.

Supply of single LED light fitting with S & F 1 no. 18W LED tube with Alluminium Heat Sink body including inbuild driver and complete accessories. ( Make : Philips-TMC 502 -1 X T-LED 22 W with MAS LED Tube1200 mm 18 w 865 T8I-2100lm / wipro)

Supply of twin LED light fitting with S & F 2 no. 18W LED tube with Alluminium Heat Sink body including inbuild driver and complete accessories ( Make : Philips-TMC 502 -1 X T-LED 22 W with MAS LED Tube1200 mm 18 w 865 T8I-2100lm / wipro)

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Dismantling steel tubular/Rail/Strut embedded in CC foundation incl. excavation, filling of holes, restoring surface, loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km

Erection of Single Steel tubular pole of length as given below with sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate with hard jhama metal including CC (6:3:1) muffing dimension 0.60x0.60x0.76 mt. above ground level, neatly cemented finish (3 mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable for alkathene/polythene pipe entry, for street light wiring, without Loop Box. (For 9 mtr pole)

Supply and fixing of Junction Box Syntex make with front side opening door and locking arrangement, with clamp. Junction box having 250 x 200 x 105 (Inside) dimension. Each have consist of the following materials EARTH Stud, 2 WAY Stud Type Power Terminal – 32A, 6A MCB with base (L&T/ Havells)- 1no, Make- Syntex, Type No- GSJB. 2520 Make- Syntex/ Hensel/ or similar make

Supply & Laying of 3 core 2.5 sqmm PVC insulated flexible cables(FRLSH) from loop box to fitting as per GS. [Make-Finolex/KEI/Havells/Polycab/Glostar]

Supply & Delivery of 1.1 kv grade 2Cx4 sqmm XLPE-armoured AL. cable, as directed by EIC. [Make-Finolex/KEI/Havells/Polycab/Glostar]

Laying of above 2Cx4 sq.mm/ 2Cx10 sqmm. XLPE/Ar. AL Cable on wall/surface incl. S&F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting, as per GS.

Supplying and fixing 2 Way MCB SS enclosure with IP-20/30 protection, powder coated provision with 20ADP MCB (Legrand), concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (Make- L&T/Havells/Cabtree)

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables of 2 core 4 sqmm ( as per GS)

Finishing the end of 2 core 4 sqmm cable XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials, as per GS.

Earthing with 50 mm dia TATA-Medium GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level .

Excavation of soil for installation of Earth Electrode and filling & ramming.(For soft soil)

Connecting the equipments to earth busbar including S & F Solid 8 SWG GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages

Dismantaling of all existing fiitings,loop box,muffing,cable etc.(All dismentaled matirials should be hand over to the pwd store in that campus)

Note: 1) All the above rates should be quoted inclusive of all taxes & duties as applicable. 2) The warranty for the LED light fittings and Flood/Area/Street Light fittings of BOQ ltem Sl. No. 1.00, 2.00 and 3.00 has to be provided for 5 years by the manufacturer/OEM .. The Sl. No’s of the Fittings must be mentioned in the Delivery challan on site along with the warranty certificate provided by the Manufacturer/OEM specifying the fittings with Serial number and date. 3) LM 79 and LM 80 Report of BOQ ltem Sl. No. 1.00, 2.00 and 3.00 have to be submitted before submission of bill

BHARAT INFOCOM (BID ID -6109888)

GUHA ENTERPRISE (BID ID -6120193)

CARRYON ENGINEERS (BID ID -6127778)

RAMKRISHNA ELECTRIC (BID ID -6102846)