PROVISION OF CERTAIN SANCTIONED WORKS OF WATER SUPPLY IN AREA OF AGE EM EXT (WS) AND EXTERNAL ELECTRIC SUPPLY WORKS IN THE AREA OF AGE EM EXT(ELECT) UNDER GE E/M LUCKNOW.

Amount

Excavation in trenches not exc 1.5m wide and and not exc. 1.5m depth wide in soft/loose soil for laying electric cables/pipes etc including getting out excavated earth and trimming the sides and bottoms of trenches , complete all as specificed and directed by Engineer-in-Charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cables have been laid and tested, complete all as specified and directed by Engineer-in-Charge.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point , complete all as specified and directed by Engineer-in-Charge.

Cutting of road ( in hard /dense soil) for laying pipe line or repairs to pipes / lead joints etc. of any size upto 1 metre depth and getting out including forming bottom surface to required level or slope and making good the road as per existing all as specified and directed.

Boring/Drilling ( horizontally) upto 150 mm bore by penumatic tool or by horizontally boring/drilling machine under existing road ( maximum 10 M in width) suitable for passing GI tubing complete all as specified.

Supply, laying, jointing, commissioning & testing of Ductile Iron , S/S including specials, Class “K-9” ,150 mm (6”) dia with flanged ends and wall thickness 6mm across the RCC Piller /Dome of over head tank at hight of 26 meter approximately from normal ground level including fixing arrangement of bamboo or Steel tubing with suitable locking etc.including taking out of existing unserviceable CI pipe , complete all as specified and directed by Engineer-in-Charge. Note- Rubber gasket joints and DI speicals/fittings shall be measured and paid separately.

Supply, laying, jointing, commissioning & testing of Ductile Iron water mains with flanged ends, centrifugally cast of class K-9, 200 mm dia with flanged ends and wall thickness 6mm including taking out of existing unserviceable CI pipe , complete all as specified and directed by Engineer-in-Charge. Note- Rubber gasket joints and DI speicals/fittings shall be measured and paid separately.

Supply, laying, jointing, commissioning & testing of Ductile Iron water mains with flanged ends, centrifugally cast of class K-9, 150 mm dia with flanged ends and wall thickness 6mm including taking out of existing unserviceable CI pipe , complete all as specified and directed by Engineer-in-Charge. Note- Rubber gasket joints and DI speicals/fittings shall be measured and paid separately.

Cast iron specials 'ISI marked' for pressure water mains up to 150 mm bore spigot and socket Tee, pieces, single or double branch connection or collar etc. fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Note - Joint,Excavation and earth work shall be measured and paid for seperately.

Cast iron specials 'ISI marked' for pressure water mains from 200 to 300 mm bore spigot and socket Tee, pieces, single or double branch connection or collar etc. fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Note - Joint, Excavation and earth work shall be measured and paid for seperately.

Cast iron connecting pieces one end flanged and other socket or spigot or bell mouth or any size taper upto 300 mm bore fixed as in repair, complete all as specified and directed by Engineer-in-Charge. Note - Joint, Excavation and earth work shall be measured and paid for seperately.

Run lead joints suitable for spigot & socketed CI/DI Pipe and caulking the joints properly for avoiding leakage etc including burning out lead joint in position, removing & recovering old lead & necessary earth work excavation as required for 80 mm dia bore fixed as in repair for new/old pipe lines of fittings , complete all as specified and directed by Engineer-in-Charge.

Run lead joints suitable for spigot & socketed CI/DI Pipe and caulking the joints properly for avoiding leakage etc including burning out lead joint in position, removing & recovering old lead & necessary earth work excavation as required for 100 mm dia bore fixed as in repair for new/old pipe lines of fittings, complete all as specified and directed by Engineer-in-Charge.

Run lead joints suitable for spigot & socketed CI/DI Pipe and caulking the joints properly for avoiding leakage etc including burning out lead joint in position, removing & recovering old lead & necessary earth work excavation as required for 150 mm dia bore fixed as in repair for new/old pipe lines of fittings , complete all as specified and directed by Engineer-in-Charge.

Run lead joints suitable for spigot & socketed CI/DI Pipe and caulking the joints properly for avoiding leakage etc including burning out lead joint in position, removing & recovering old lead & necessary earth work excavation as required for 200 mm dia bore fixed as in repair for new/old pipe lines of fittings , complete all as specified and directed by Engineer-in-Charge.

Flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of 80mm size of water mains/fittingsincluding dismantling of unserviceable flange joints ,complete all as specified and directed by Engineer-in-Charge.

Flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of 100mm size of water mains/fittings including dismantling of unserviceable flange joints ,complete all as specified and directed by Engineer-in-Charge.

Flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of 150mm size of water mains/fittings including dismantling of unserviceable flange joints ,complete all as specified and directed by Engineer-in-Charge.

Flanged joints complete with rubber or fibre board gasket for new/old pipe lines including nut bolts & washers etc. of 200mm size of water mains/fittings including dismantling of unserviceable flange joints ,complete all as specified and directed by Engineer-in-Charge.

Cutting of existing Cast Iron pipes water main in position for for insertion of new tee for branch connection by inserting CI fittings etc for 80 mm bore pipe including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge. Note : CI fittings and joints shall be measured and paid separately under appropriate items)

Cutting of existing Cast Iron pipes water main in position for for insertion of new tee for branch connection by inserting CI fittings etc for 100 mm bore pipe including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge. Note : CI fittings and joints shall be measured and paid separately under appropriate items)

Cutting of existing Cast Iron pipes water main in position for for insertion of new tee for branch connection by inserting CI fittings etc for 150 mm bore pipe including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge. Note : CI fittings and joints shall be measured and paid separately under appropriate items)

Cutting of existing Cast Iron pipes water main in position for for insertion of new tee for branch connection by inserting CI fittings etc for 200 mm bore pipe including necessary excavation & earth work and dewatering of residual water,complete all as specified and directed by Engineer-in-Charge. Note : CI fittings and joints shall be measured and paid separately under appropriate items)

Short pieces of CI/DI pipe duly thread and both end flanged as per site requirement upto 60 cm for 80 mm bore sizes,complete all as specified and directed by Engineer-in-Charge. Note - Length of pipe more than 60 cm will be measured and paid in the respective item of CI/DI pipe

Short pieces of CI/DI pipe duly thread and both end flanged as per site requirement upto 60 cm for 100 mm bore sizes,complete all as specified and directed by Engineer-in-Charge. Note - Length of pipe more than 60 cm will be measured and paid in the respective item of CI/DI pipe

Short pieces of CI/DI pipe duly thread and both end flanged as per site requirement upto 60 cm for 150 mm bore sizes,complete all as specified and directed by Engineer-in-Charge. Note - Length of pipe more than 60 cm will be measured and paid in the respective item of CI/DI pipe

Short pieces of CI/DI pipe duly thread and both end flanged as per site requirement upto 60 cm for 200 mm bore sizes,complete all as specified and directed by Engineer-in-Charge. Note - Length of pipe more than 60 cm will be measured and paid in the respective item of CI/DI pipe

Drilling and tapping cast iron/ mild steel water mains ( in position ) for branch connections including supply of GI nipple of medium grade pipe,150mm long of 15 mm bore ,complete all as specified and directed by Engineer-in-Charge.

Drilling and tapping cast iron/ mild steel water mains ( in position ) for branch connections including supply of GI nipple of medium grade pipe,150mm long of 20 mm bore ,complete all as specified and directed by Engineer-in-Charge.

Sluice valve of size 150 mm bore connection & testing 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc including taking down of unserviceable Sluice valve ,complete all as specified and directed by Engineer-in-Charge.

Sluice valve of size 200 mm bore connection & testing 'ISI marked' both ends flanged and drilled cast iron body class PN-1.6 conforming to IS-14846/2000 complete with gun metal spindle including necessary nut bolts etc including taking down of unserviceable Sluice valve ,complete all as specified and directed by Engineer-in-Charge.

Construction of valves pit chamber of size 900x900x900mm (internal dimension), using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS frame including 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame out of 40 x 40 x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coat including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs ,complete all as specified and directed by Engineer-in-Charge.

Construction of valves pit chamber of size 1200x1200x1000mm (internal dimension), using PCC (1:4:8) 40 mm graded stone aggregate for foundation 15 cm thick, 23 cm thick wall in CM (1:4) 10 mm thick rendering all around the brick work with 1:6 cement mortar PCC (1:2:4) type B1 coping with 20 mm graded agregate for grouting MS frame including 4 mm thick MS top sheet cover with locking arrangement including 50 mm pad lock with double key arrangement, MS frame out of 40 x 40 x 5 mm thick angle iron including paintaing of steel surface with two coats of synthetic enamel paint over a coat of red oxide primers finishing coat including necessary excavation in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtrs ,complete all as specified and directed by Engineer-in-Charge.

Luminaries light out door fully cast aluminium body finished with stove enameled paint acrylic window cover (Total Height 3 Mtr ), fully cast Aluminium heavy pole designer leg and broader designer base finished with stove enamelled paint diameter apprx 78 mm body surmounted with fully cast aluminium body finished with PU paint with acrylic window covermax length of fitting 2480 mm ,B-22 Brass holder including 03 Nos LED Bulb 18 Watt ,complete all as specified and directed by Engineer-in-Charge. Make- Mepro Electrical with combined cat Pt No MCPL-04 with CDPB-06 with two nos PTL-003 or any other equivalent make as approved by GE/Engineer -in -Charge.

Supplying and laying, fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 4 core complete all as specified laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Supplying and laying, fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 16 sqmm cross sectional area, 2 core complete all as specified laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Supplying and laying, fixing, jointing and testing LT under ground electric power cable crossed linked polyethylene ( XLPE) insulated, galvanised steel strip armoured, ISI-7098 Marked, with aluminium conductor multi stranded, heavy duty 1100 Volts grade of size 25 sqmm cross sectional area, 4 core complete all as specified laid in trenches/ laid under floor or fixed naked with walls/ on poles/ in ducts /in GI pipes etc. with and including MS clamps, nuts , bolts, washers complete all as specified and directed. Note :- Excavation, earth work, sand cushioning, protection bricks/ tiles/ block and pipe shall be measured and paid separately under appropriate items.

Sand cushioning to cables with a layer of sand 8 cm deep before laying the cable and 15 cm depth (punned down to 10 cm depth after laying and stretching of cable), complete all as specificed and directed by Engineer-in-Charge. Note: Punned thickness (over all 18 cm) shall be measured & paid.

Protection of cable with one layer of bricks laid flat butting to each other in such a way that the length of the bricks is at right angle to the central axis of the cable using old size sub-class ‘B’ bricks, complete all as specified and as directed by Engineer-in-Charge.

End termination heat shrinkable joint including sleeves suitable for LT XPLE underground aluminium conductor cable 1000 Volt of grade 10 Sqmm to 25 Sqmm x 2/4 Core cross sectional area including testing after jointing as in replacment after disconnecting the cable from Panel / Pole, preparing the end for jointing including all earth work,complete all as specified and directed by Engineer-in-Charge.

Boring/Drilling ( horizontally) manually under existing road ( maximum 10 M in width) suitable for passing GI tubing of 40 to 100 mm bore , complete all as specified and as directed by Engineer-in-Charge.

Plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregates, as coping of poles ,complete all as specified and as directed by Engineer-in-Charge.

Galvanised mild steel pipe /tubing, of size 40 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified and as directed by Engineer-in-Charge. Note:- Excavation & Earth work, shall be measured and paid separately.

Earthing complete with Galvanised steel earth plate electrode 600 mm x 600 mm x 6 mm burried directly in ground vertically in pit of depth not less than 2.25 metre below normal ground level with top edge of the earth plate at a depth not less than 1.5 metre below normal ground level surrounded from all sides with mixture of charcoal and common salt in alternate layers and electrode connected to G I earth strip 4 dia G I wire by means of brass bolts, nuts, check nuts and washers, earth strip protected by galvanized steel pipe 40 mm bore (light grade) connected to main switch board or any other electrical equipment all as shown in electrical plate No. 5 of SSR-2009 Part I and including necessary excavation and earth work in any type of soil, 20 mm bore medium grade GI pipe for watering, funnel with wire mesh, PCC (1:3:6), type C-1 chamber, pit cover of precast RCC (1:2:4), type B-1, reinforced XPM of weight not less than 4 kg/ Sq.m and MS frame etc. including taking out of old unserviceable earthing, complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 1.0 metre away from earth.

Twin core, 6 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed, complete all as specified and directed by Engineer-in-Charge.

Twin core, 10 sqmm nominal cross sectional area multistranded aluminium conductor cable, over all PVC sheathed, 1100 Volts grade heavy duty cable PVC insulated and PVC sheathed , complete all as specified and directed by Engineer-in-Charge.

Supply, fixing, connecting and testing energy efficient LED flood light fittings of 120 Watt die cast aluminium housing and IP65 protection with high power LED as light source including XLPE armoured cable 2 core 4 Sqmm up to 5 mtr from fitting to panel box with emitter complete all as specified and directed. Make :- Havells Cat Part no. JETAIRISFLS120WLED75PASYMLTG or any other equivalent make as specified in Annexure of MAKE as per PS.

Supplying, transporting, erecting and fixing Steel tubular swaged poles type 410 SP-31 ( 9.0 metres long) complete with cast iron base plate, finial, taper plug, bolts, nuts and screws as specified, including necessary excavation and earth work , PCC 1:4:8 type D2 in foundations below pole, PCC 1:3:6 type C2 around poles and PCC 1:3:6 type C1 as in plinth block , disposal of surplus soil to a distance not exceeding 50 m and depositing where directed, painting steel tubular poles exposed surafces with Aluminium paint two coats over one coat of red oxide primer and providing 300 mm wide bands (4 bands/ straps with synthetic enamel paint and 2 bands with Black bituminous paint ) from plinth block and numbering of poles , painting embedded portion of poles with one coat of bituminous paint , complete all as specified and directed by Engineer-in-Charge. Note :- (a) Cost of excavation/ earthwork, RCC, PCC foundation as per manufacturer's design, reinforcement, formwork etc is deemed to be included in the rates quoted above. (b) The rates quoted above is deemed to be included for providing all materials and accessories including with fabrication of 9 mtr steel tubular pole and any other item required as per site requirement to incorporate above features.

Earthing complete with galvanised steel plate earth electrode 600X600X6mm thick buried directly in ground (earth pit not less than 2.25 meter below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to GI strip 32x6mm at two points by means of bolts and nut, check nut and washers including charcoal dust, common salt, necessary excavation in hard/dense soil, returning filling in and removal of surplus soil to a distance up to 50metres, PCC pit in 1:3:6 type CI (using 20mm grade stone aggregate) RCC 1:2:4 type B-1 (using 20mm grade stone aggregate ) 50mm thick pit cover, reinforced with 8mm dia TMT bars 75mm c/c, both ways MS handle 12mm dia, GI funnel, wire mesh and GI watering pipe of 20mm bore GI (light grade) and earth lead protection pipe 40mm bore (light grade) all as specified, directed and shown in electrical plate No 5 of SSR Part-I and testing , complete all as specified and as directed by Engineer-in-Charge. Note :- (i) The unit rate includes earth lead and protection pipe up to maximum 7.5 metre from earth plate to earth point/test point. (ii) Earth pit shall be constructed minimum 1.00 metre away from earth. (iii) If the desired earth resistance is not found, earthing shall be redone by the contractor at no extra cost the department.

MS Junction Box powder coated made of 1.6 mm thick MS sheet of size 300mmx200mmx150mm complete with front openable hinged cover and locking arrangements with 4 Nos aluminium bas bar 100 Amps, mounted on porcelin insulator including M&L for MCB SP 10Amp , 10 KA-1No, fixed on box in Din rail complete with electrical connection fixed to pole with suitable size FI clamp nut bolts and washer including duly painted with powder coated paint complete including S&F required size and length of copper conductor cable and making connections , complete all as specified and directed by Engineer-in-Charge.

Street light timer switch digital type having 24 hours to 7 days setting astro type (having longitude and latitude in memory) with 6 years battery backup complete with following accessories provisioned in factory made sheet metal box powder coated and fixing arrangement on pole/wall/ in feeder pillar complete all as specified and directed having following:- MAke-Havells Cat No IHXSS0106A or equivalent of Indoasian or L&T (a) MCB TP 32 Amps, 415 Volts - 01 No (b) Digital timer having 24 hours to 7 days time setting with memory location.-01 No (c) Power contractor ML-3 three pole coil voltage 240V-01 No (d) Complete wiring with suitable size of copper conductor including necessary thimbles.

Supply, installation, testing and commissioning of evaporative desert coolers (steel body) factory made 22 gauge PGI sheet of size 100x70x60cm appx , front and side panels are made of same gauge with wood wool pads having nominal air flow capacity of 4000 cfm, or nearest size,having exhaust fan motor of capacity 1/5 HP with 18” steel blade size, and submersible pump of capacity 1/60 HP, and powder coated including necessary arrangement for connecting to new or existing source of water supply line with all fittings and fixtures complete all as specified and dire cted. Make-Champion or equivalent. Make of Exhaust Fan-Crompton Greaves, Havells, BAJAJ, KHAITAN, Make of submersible pump-BAJAJ, SYMPHONY, ORIENT, KHAITAN

Fabrication of mild steel stand made out of MS angle iron and flat grade Fe-290-Gde E-165 of size as directed suitable for positioning the desert cooler / stablisers including painting with two coat of (black) enameled paint over a coat of red oxide primer and installed at locations ,complete all as specified and as directed by Engineer-in- Charge.

Point wiring for one socket outlet point 5 amps on independent board controlled by one, one way switch by using 1.5 Sq mm nominal cross sectional area multistranded copper conductor, PVC insulated unsheathed FRLS cables in and including PVC concealed conduits and conduit accessories/fittings, pressed steel terminal switch boxes, 3 mm thick Bakelite sheet top cover (ISI Marked) fitted with Chromium plate brass screws washers and 1.5 Sq mm nominal cross sectional area multistranded copper conductor green PVC insulated unsheathed earth wire and connecting to earth dollyincluding taking down carefully aluminium conductor point wiring (light, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc. and removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately)and making good disturbed surfaces of walls, floors, etc. to match with the existing good disturbed surfaces of walls, floors etc. match with the existing ,complete all as specified and as directed by Engineer-in- Charge.

Switch piano flush type , single pole , 5/6 Amps, one way polycarbonate type ,complete all as specified and directed by Engineer-in- Charge.

Socket out let 2 in 1 socket 5 pin , (6 Amps ) flush type controlled by one switch polycarbonate type ,complete all as specified and directed by Engineer-in- Charge.

SB Singh and co.