Construction of Govt. Degree collage at Sihunta at new site Sihunta Distt. Chamba H.P.

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, ordinary rock ,soft rock ,hard rock chiseling, wedging out rock (where blasting is prohibited) and their intermediate classification of soil complete including setting out true to the lines, grades, width, cutting and trimming of side slopes and levels as shown in the drawings and as directed by Engineer-in-Charge at site, according to the MORD technical specification section 300 and 1600 and sorting out useful materials and stacking the same within all leads and lifts in acquired road width and transportation of un-useful materials for filling in roadways camber ,embankments for grade improvements and disposal of all un-useful materials to approved dumping sites through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machineries ,materials, tools, equipments and safety measures and other incidentals necessary to complete the work by mechanical means and/ labour if required.All useful materials such as stones, shingle aggregate and slates etcetera shall be sorted out and stacked in proper stack. Any loss to the public/ private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be compensated by him in all cases.The rate is inclusive of octroi, royality ,Malkana, toll tax , GST or any other taxes imposed by the Government .

Earth work in excavation for all type of road structure such as retaining walls, breast walls, culverts, drains and parapets etcetera in all type of classification of soil, comprising of ordinary soil, ordinary rock , hard rock chiseling / wedging out rocks (where blasting is prohibited) as per drawings and MORD technical specification section 300 and 1600 as per the directions of the Engineer-in-Charge including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal of un-useful materials upto any lead and lift including dressing of sides bottom and back filling in trenches with excavated suitable / approved materials to the original surface in layers not exceeding 150mm (one hundred fifty millimetre) compacted thickness including shoring, strutting pumping and bailing out water (surface and sub soil water) upto any depth and any quantum of water including cleaning of slush which may arise out during dewatering as per directions of Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate is inclusive of octroi, royality ,Malkana, toll tax , GST or any other taxes imposed by the Government .

Providing and Laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:4:8 (one cement isto four sand isto eight graded) crushed stone aggregate 40 mm (Forty millimetre) nominal size in or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arrise at the time of laying under water complete for all height / depth including the cost of form work complete in all respect as per the drawing and MORD technical specifications Section 800, 900 ,1200 and 1604 and as per direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rates is inclusive of the octori, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Back filling with granular material behind abutments, return walls, wing walls and retaining walls complete as per drawings and MORD technical specification clause 1203 and 1604 or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate is including octoroi, royalty, Malkana, toll tax, sales tax, GST or any other taxes imposed by the Government.

Providing Weepholes in brick masonary / stone masonary / plain / re-enforced concrete abutment, wing wall, return wall, retaining walls with 100 mm (one hundred millimetre) dia meters, PVC pipe of finolux or its equalvalent of pressure 6 kg/ sqm extending through the full width of the structures with a slope of 1 (one) vertical : 20 (twenty) horizontal towards drainage face complete as per drawing and MORD technical specification clause 709, 1206.6 and as per direction of Engineer-In-Charge including carriage of materials with in all leads, lifts and other incidentals. The rates is inclusive of the octoroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Steel work welded in built up sections trusses and framed work including cutting, hoisting fixing in position and applying a priming coat of red lead paint in gratings, framed guard bars, ladders, railing brackets similar mark complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and Laying mechanically mixed and vibrated plain cement concrete in foundation for all type of structure complete of plain concrete nominal mix 1:6:12 (one cement isto four sand isto eight graded) crushed stone aggregate 20 mm (twenty millimetre) nominal size in or under water and curing complete including pumping or bailing out water, dewatering, removal of slush as required at site which may arrise at the time of laying under water complete for all height / depth including the cost of form work complete in all respect as per the drawing and MORD technical specifications Section 800, 900 ,1200 and 1604 and as per direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rates is inclusive of the octori, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government.

Excavation in foundation trenches etc. in earth work in all kinds of classification of soil such as pick work, jumper work, pick jumper work, blasting work in jumper blasting work soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rock where blasting is prohibited, or any other mixed variety of soil including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depth or any quantum of water including slush which may arise during dewatering, removal of slush and stacking the excavated soil clear from the edge of excavation with in all leads, as directed by Engineer-in-Charge and then returning the stacked soil in 15cm (fifteen centimeters) layers when required into plinths, sides of foundations etc. consolidating each deposited layer by ramming watering and then disposing of all surplus excavated earth as directed by Engineer-in-Charge with in all leads and lifts, disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government

Filling in plinth with sand under floors including watering, ramming consolidating and dressing complete as per HPPWD specification or as directed by Engineer-in-Charge, including carriage of materials with in all leads, lifts and other incidental. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights. below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work in foundation footings, basis of columns etcetera and mass concrete, and as directed by the Engineer-in-Charge including carriage of materials. Within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings, shelves, and the like floor, etc. up to any thickness, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, bressumers and lintels upto any depth/heights, up to all floor level and as directed by the Engineer-in-Charge including carriage materials of within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Columns, pillars, posts and struts, (square, rectangular/ polygonal in plan), up to all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, height of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15mm (Three decimal one five millimeters) thick, welded with angle iron in frame 30x30x5mm (Thirty into Thirty into Five millimeters) so as to give a fair finish including centering, shuttering strutting and propping etc, with wooden battens and ballies, heights of propping and centering in all heights below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls upto any width, up to all floor level and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing form work with steel plates 3.15 mm (three point fifteen millimetre) thick welded with angle iron in frame 30 X 30 X 5 mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra with wooden battens and ballies, in all heights of propping and centring below supporting floor to ceiling and removal of the same for insitu-reinforced concrete and plain concrete work in Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters, buttresses, plinth and string courses and the like including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Malkhana, Royality, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 25mm (Fifty five millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying stone filling under floor all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (Twenty design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 330 kg (three hundred thirty) Killogram per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in foundation footings, bases of columns etcetera and the like mass concrete complete as per HPPWD specification and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320 Kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in suspended floor roofs, landings and shelves and their supports, balconies, beams, girders, bressumers cantilevers and the like shelves and work tops etcetera in all upto all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-25 (M-Twenty) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty newton) per square millimeter with cement contents not less than 360kg (three hundred sixty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/thickness and upto all floor level, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-25 (M-Twenty) design mix to obtain the minimum compressive strength of 25 N/mm2 (twenty newton) per square millimeter with cement contents not less than 360kg (three hundred sixty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in Walls (Any thickness but not less than 0.10 (Zero point ten meter) meter thickness including attached pilasters buttersses, plinth and string course etcetra , and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N (twenty newton) per square millimeter with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated reinforced cement concrete work Grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20 N/mm2 (twenty newton) per square millimeter with cement contents not less than 320kg (three hundred twenty) Killogramme per cubic meter and curing complete including the cost of form work but excluding the cost of reinforcement Chajjas not exceeding 10 cm (Ten Centimetre) thickness up to floor all level including finishing the exposed surfaces with cement mortar 1:3 (One cement is to three sand ) to give a smooth and even surface entring/form work and curing complete, and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying upto first floor level mechanically mixed and vibrated reinforced cement concrete 1:2:4 (one cement isto two sand isto four graded stone agreegate 20 mm (twenty millimetre) nominal size) to give smooth and even surface including centring and shuttering etcetra but excluding cost of reinfocement in Mouldings as in cornices windows, sills etcetra exceeding 15cm (fifteen cetimetres) in girth within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in super structure above plinth level upto floor all level including raking out joints in cement mortar 1:6 (one cement isto six sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals .and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Random rubble masonry/polygonal rubble masonry (uncoursed / brought to courses ) with hard stones of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (one cement isto six sand isto twelve graded stone agreegate 20mm (twenty millimetre) nominal size) in cement mortar 1:6 (one cement isto six sand) in breast walls and retaining walls within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals..and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, Royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying Tor steel reinforcement for Reinforced Cement Concrete work including bending, binding and placing in position complete including cost of binding wire and other incidentals for its completion up to all floor level complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying damp proof course 100mm (one hundred millimeters) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (twelve decimal five millimeter) nominal size and curing complete including cost of form work and as required at site and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying a coat of hot bitumen mexphalt 80/100 (eighty/hundred) or equivalent using 1.70 Kgs. (one decimal seven zero Kilogram’s) per square meter on damp proof course after cleaning the surface with a piece of cloth lightly soaked in kerosene oil including carriage of materials within all leads, lifts and other incidental and as per the direction of Engineer-in-Charge. The rate inclusive of Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying cement slurry on R.C.C. slab or cement concrete work using 2.75 kg. (two point seventy five) kilogram) of cement per squaremeter of floor area before laying cement concrete flooring including roughening, cleaning of the concrete surfaces complete within all leads lifts as per the direction of the Engineer-in-charge and other incidentals.

Second class half brick work using common burnt clay building bricks in super structure above plinth level upto all heights/floor level in cement mortar 1:4 (one cement : four sand) shall be provided with hoop iron and curing complete including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in super-structure above plinth level upto all floor level in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Brick work using Second class common burnt clay buildings bricks in foundation and plinth in cement mortar 1:6 (one cement : six sand) and curing complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. Channels in doors and window frames manfactured from Mild steel channel section 75 x 40 x 5 mm (Seventy five into forty into five Millimeter) M.S. flat 75x 5 mm (Seventy five into five millimeter) combination as per design drawing including hinges, jambs, beeds if required threshold of M.S angles 50 x 25 mm ( Fifity into twenty five millimeter) welded or rigidly fixed by mechanical means lugs, with spilt ends tails to each jambs including steel bults hings 2.5 mm (Two point five millimetre) thick with a provision of locking arrangements shock observes and specified and applying coat of approved steel primer after pre-treatment of surfaces as directed by the Engineer-in- Charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing factory made double steel shutter windows side hinge ( 1 glazed and other wire gauge) of standard rolled steel section jointing metered welded with manufactured to relevant ISI standard specification with 16 x 3.15 mm (Sixteen into threee point fifteen millimeter)lugs 20 cm (Twenty centimeter) long embedded in cement concrete block 1:3:6 (1 Cement:3 and:6 graded crushed stone aggregate 20 mm(Twenty millimeter) with wooden/Steel plugs and screw or with fixing clips or with bolts and nuts as required and iron fitting , including providing and fixing of glass pans with special putty of glazed side of shutter and wire gauge of IS designnation 85 G with metal beading on other side complete including priming coat of red lead paint.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing Single rebate angle iron door, window, clerestory window frame manufactured from structural iron section of 35x35x4mm (thirty five into thirty five into four millimeter) thickness welded with 50x6mm ( Fifty into six millimeter) thick flat iron including hinges, jambs, lock jambs mild steel 50x25mm ( Fifty into twenty five millimeter) welded or rigidly fixed by mechanical means lugs with spilt end tails to each jambs including steel but hings 2.5 mm ( Two point five millimeter) thick with provision with locking arrangement and shock observer as specified and applying a coat of approved steel priming after pretreatment of the surfaces as directed by the Engineer- in-charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing double rebate angle iron door Window, clerestory window frame manufactured from structural steel iron section of 35x35x4mm (thirty five into thirty five into four millimeter) thickness welded with 50x5 mm (Fifty into five millimeter ) thick flat iron including hinges, jambs, lock jambs mild steel 50x 25 mm ( Fifty in to twenty five millimeter) welded or rigidly by Mechanical means lugs with spilt end tails with spilt end tails to each jambs including steel butt hinges 3.5mm ( Three point five Millimeter) thick with provision with locking arrageement and shock observer as specified and applying a coat of appproved steel priming after pretreatment of the surfaces as directed by the Engineer-in-Charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing to existing door frames, 30mm (Thirty millimetre) thick factory made PVC Panelled door shutters(Code No. 9.120 of Rajshri) consisting of frame made out of M.S tubes of 19 (Ninteen ) gauge thickness and size of 19 mm x 19 mm (Ninteen into ninteen millimetre) for styles and 15 mm x 15 mm ( Fifteen millimetre into fifteen millimetre) for top and bottom rail, M.S frame shall have a coat of steel primer of approved make and manufactrucre M.S frame covered with 5 mm (Five millimetre) thick heat moulded PVC"C" channel of size 30 mm ( Thirty millimetre) thickness , 70 mm (Seventy millimetre width out of which 50 mm (fifty millimetre ) shall be flate and 20 mm ( Twenty millimetre) shall be tappred in 45 degree angle either side formimg style and 5 mm (Five millimetre)95 mm (Ninty five millimetre) wide PVC sheet out of which 75 mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimeter ) shall be tappred in 45 degree (Forty five ) on the inner side to form top and bottom rail and 115 mm (one hundred fifteen millimetre) wide PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (Twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the nanelb 10 mm (Ten millimetre) thick 20mm (Twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail panelling of 5 mm (Five millimetre) thick both side PVC Sheet to be fitted in the M.S frame welded /sealed to the style & rails, Joints mitred and jointed with solvent cement adhesive including fixing of PVC shutter with existing frame with M.S butt hinges 100x50x1.90( Hundred into fifty into one point nine zero millimetre) size with necessary screws etctra complete as per manufactures specification including carriage of materials within all leads, lifts and other incidental, or as directed by the Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing plain M.S. grills of required patterns in steel frames of window etc. with M.S grill made of 10 x 10 mm (ten millimeter in to ten millimetre) in M.S square bar welded to 20mmx4mm (Twenty millimeter into four millimeter) M.S. flat, round headed bolts and nuts or screws complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate including of toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing flush door shutters interior grade, commercial type,phenol bonded ISI marked Centuary/Alpro/Duro ply/Green ply No. IS-2202- to be finished with mica lamination of approved shade core of black board costruction with 35mm (thirty five millimetre) thick frame of first class hard wood and shall matched commercial ply veneering with vertical grains of cross bands and face vencoro on both faces of shutters including black enamelled MS butt hinges complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals.The rate including of toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing Glazing with Glass panes of 5mm (Five Millimetre) thick plain glass weight not less than 10 kg (Ten Kilogram) of Modiguard/saint gobain for fixed shutters with putty and nails complete, as per specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing Glazing with frosted glass panes 4mm (Four millimetre) thick of modiguard / sant gobain for shutter with screw and nails complete.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing position collapsible steel shutters with vertical channels 20mm X 10mm X2mm (twenty millimetre into ten millimetre into two millimetre) and braced with flat iron diagonals 20mm X 5mm ( twenty millimetre into five millimetre) size with top and bottom rail of T irom 40mm X 40mm X6mm (forty millimetre into forty millimetre into six millimetre) with 38mm (thirty eight millimetre) dia steel pully complete with bolts and nuts locking arangment, stoppers, handles including applying a priming coat of red lead paint within all leads and lifts as per the direction of the engineer-in-charge and other incidentals.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 40 mm (Forty millimeter thick panelled and Glazed shutter with frame of first class deodar wood for door having 12mm thick ( Twelve Millimeter) both side prelaminated water proof partical board in mat finish ISI marked No. 12823 in fill panel of Action/Tesa/Century/Kitlam/Green below lock rail and 6 mm (Six millimeter) thick glazing of Modiguard /Saint gobain above lock rail including black enamelled iron butt hinges with necessary secrews . The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing 40 X 3 mm ( forty into three millimetre) flat iron hold fast 40 cm (forty centimetre) long including fixing to frame with 10 mm (ten millimetre) diametre bolts, nuts and wooden plugs and embeding in cement concrete block 30 X 10 X 15 cm (thirty into ten into fifteen centi metre) 1:3:6 (one cement isto three sand isto six graded stone agreeagte 20 mm (twenty millimetre) nominal size) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 25 mm ( Twenty five Millimeter) thick water proof commercial board of uniply/Green ply/century/ kit ply/ Duro ply/ Marino (ISI Marked ) for cup board shutters including 19 mm ( Ninteen millimeter) thick shelves and back side of the cub board shall be of 6 mm (Six millimeter ) thick ply and all cut portions of shutters shall have 6mm (Six millimeter) thick / 12 mm (Twelve millimeter ) thick hard wood edging. The shutter from out side shall to be finished with 1mm ( One Millimeter) thick lamination of century/ Greenlam/ ActionTesa/ Merionolam of approved shade including fixing Top PTMT handles 125mm (One Hundred Twenty five millimeter long shall be provide in wood colour with nickel plated paino hinges including fixing with nickel plated paino hinges with screws etcetera as directed by the Engineer-in-Charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 25 mm ( Twenty five Millimeter) thick water proof commercial board of uniply/Green ply/century/ kit ply/ Duro ply/ Marino (ISI Marked ) for for SDB shutters with 6mm (Six millimeter) thick hard wood edging. all round and PGI Sheet lining inside of shutters of approved shade asper specification, approved drawing, design etc complete or as directed by the Engineer-in-Charge.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 10mm (ten millimetre) dia brash magnet catcher for cup board shutter with necessary screws etcera complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 65 X 35mm (sixty five into thirty five millimetre) special quality bright finished brass cup board locks or ward robe locks with six levers including necessary screws etcetera complete (Indian make of approved quality) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.

Providing and fixing 25mm(Twenty five millimeter) dia chromium plated brass curtain rod having wall thickness of 1.25 mm (One point two five millimeter) with two cromium plated brass brackets fixed with cromium plated brass screws and PVC sleeves etcetra within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.

Providing and fixing aluminum oxidized sliding door bolts, make of PILOT/Sheel or equivalent anodized transparent or dyed to required colour and shade with necessary bolts, nuts and screws etcetera complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government. 300x16mm (three hundred into sixteen millimeters).

Providing and fixing 250x10mm (two hundred fifty into ten millimeters) aluminum oxidized tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 150x10mm (one hundred fifty into ten millimeter) aluminum oxidized tower bolts (Barrel type) make of pilot/sheel or equivalent anodized transparent or dyed to required colour and shade with screws etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing aluminium handles pivot/steel or equivalent anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 100 mm (one hundred millimetre) oxidized M.S. handles with necessary screws etcetera complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 250mm (Two hundred fifty millimeters) bright finished hard drawn hooks and eyes complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing aluminium oxidized Hydraulic door closer complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 100mm (one hundred millimetre) bright finished brass floor door stopper with rubber cushion screws etcetera to suit shutter thickness complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Octroi, toll tax , GST or any other taxes imposed by the Government.

Providing and laying 25mm (twenty five millimetre) thick mirror polished Kota stone 55x55 cm (Fifty five into fifty five centimeter of uniform color with 7.50 (Seven point five centimeter) wide Jaisalmer Yellow marble band of same shade as that of flooring 20mm (twenty millimetre) average thick base of cement mortar 1:4 (one cement isto four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab includding rubbing and polishing complete within all leads and lifts as per the direction of the engineer-in charge and other incidentals.. The rate inclusive of Octroi, toll tax , GST or any other taxes imposed by the Government.

Providing and laying (600x600x10mm ) Six hundred into six hundred into ten millimetre) Double charged /Ultra Charge Matt finished vetrified tiles of Restile/ Nitco/ Rak/ kajaria/ Johnson / Orient- Bell/ Simpolo/Somany of approved shade and design in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimetre) thick cement Mortar 1:3 (1 Cement:3) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shadee of tiles complete as per approved drawing, design and specifications.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying (600x600x10mm ) Six hundred into six hundred into ten millimetre) Double charged /Ultra Charge Matt finished vetrified tiles of Restile/ Nitco/ Rak/ kajaria/ Johnson / Orient- Bell/ Simpolo/Somany of approved shade and design in skirting Dado etc laid on a bed of 12mm (Twelve millimetre) thick cement Mortar 1:3 (1 Cement:3) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shadee of tiles complete as per approved drawing, design and specifications.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying (400x400x10mm /600x600x10mm/300x450mm) Six hundred into six hundred into ten millimetre/four hundred into four hundred/ three hundred into four hundred fifty millimeter ) Acid resistant vetrified tiles of Restile/ Nitco/ Rak/ kajaria/ Johnson / Orient- Bell/ Simpolo/Somany of approved shade and design in flooring etc etc laid on a bed of 12mm (Twelve millimetre) thick cement Mortar 1:3 (1 Cement:3) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shadee of tiles complete as per approved drawing, design and specifications.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying (300x300x25mm ) Three hundred in to three hundred millimeter into twenty five millimeter ) automatic hydraulic compressive and polished Precast terrazzo tile of NTC ISI marked No. 1237 in 50 % (Fifty percent) white cement and 50% (Fifty percent ) grey cement having 55% (Fifty five percent white chips shall be 0.B and 2B sizes of NTC or its eqivalent as per approved shade with marble chips o specified sizes, laid in floors, treads , l;anding and skirting on a bed of 25 (Twenty five millimetre) thick cement Mortar 1:6 (one Cement :six sand ) and jointed with neat cement slurry finished with pigment of required shade to match the shade of tiles including rubbibg and polishing complete as per approved drawing, design and specifications.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 300 x 300 x10 mm/300 x450 x 10 mm (Three hundred in to three hundred millimeter into ten millimeter) antiskid ceremic coloured premmium of Nitco Khajaria/AGL/RAK/Simpolo/Somany/Orient bell/Johnson in floor on 12 mm (Twelve millimetre ) thick cenment mortar 1:3( one cement is to three sand) and jointed with cement slurry or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 300 x 300 x10 mm/300 x450 x 10 mm (Three hundred in to three hundred millimeter into ten millimeter) ceremic coloured Glazed tile premmium of Nitco Khajaria/AGL/RAK/Simpolo/Somany/Orient bell/Johnson in skirting risers of step and dados on 12 mm (Twelve millimetre ) thick cement mortar 1:3( one cement is to three sand) and jointed with cement slurry or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying 300X450 mm (Three hundred in to four hundred fifty) Ceremic Glazed tiles of Kajaria/ Nitco / Simpolo/Somany / Orient & Bell / AGL/Johnson in skirting risers of steps and dados with one Border matching /Contrast at top in cement mortar 1:3 (1 cement : 3 sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment with one border matching/contrast at top of required shade to match the shade of tiles complete as per approved drawing , design and specifications. or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying 19mm (Ninteen millimeter )thick Polished Grey/Chima Pink Granite in flooring (Work Top Of Kitchen / Pantry) as per pattern laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto three sand and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing , polishing Moulding and Semi/ Double round nosing complete as per approved drawing , design and specifications. or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying 40mm (Forty millimeters) thick cement concrete flooring 1:2:4 (one cement is to two sand is to four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying 50mm (Fifty millimeters) thick cement concrete flooring 1:2:4 (one cement is to two sand is to four graded crushed stone aggregate 20mm (twenty millimeters) nominal size) laid in one layer finished with a floating coat of neat cement and curing complete up to all floor level as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 40mm (Forty millimetre) wide and 4mm (Four millimetre) thick glass strips in joints of flooring.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying 19mm (Ninteen millimetre) thick single slab kota stone in treads and riser of steps with uniform Nosing/Edging laid over 20mm (twenty millimetre) thickness base of cement mortar 1:3 (1 Cement:3 sand) and jointed with grey cement slurry mixed pigment to match the shade of granite stone including rubbing and polshing complete as per Architectural drawing, Design and specification.The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five millimetre ) labrador design rainbow series of NTC red sand stone slab flooring 25mm (Twenty five millimeter) average thick in ramp for person with disability on 20 mm (Twenty millimeter) thick base of cement mortar 1;4 (One cement is to four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish finish as per architect standard design and specification and as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) dia (Stainless steel) hollow pipe handrail slip resistant in ramp at two level including 75 cm (Seventy five millimeter) and 90cm ( Ninty centimetre) height welded with 25mm (twenty five millimetre) diametre S.S hollow pipe baluster embedded in cement concrete 60 cm (Sixty centimetre) Cement concrete and jointing with electrical gas welding at top alongwith hand rail of S.S pipe of 50 mm (Fifity millimetre) diametre. It should extend 30cm( Thirty Centimetre beyond top and bottam of the ramp as per approved drawing, design and specification.The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 50mm (fifty millimetre) dia(Stainless steel) pipe handrail fixed with 35mm (Thirty five millimetre) dia. Stainless steel baluster as per detail in combination of 35mm (Thirty five millimetre) dia and 15x20mm (Fifteen into twenty millimetre) SST pipe baluster knock down railing of kICH hand rail fixed on 10x50mm (Ten into fifty Centimetre) S.S flat balusters placed at 1200mm (Twelve thousand millimetre) Cement concrete along with 3 nod @ 16mm (Sixteen millimetre) mid rail connected at the side of the baluster with fixtures. The baluster would be fixed on the floor with casted base plate minimum 6mm (Six millimetre) thick base plate shall be concealed with suitable S.S 316 grade cover Cap railing made of Hollow tubes Channels, plates etc. including welding, grinding, buffing, polishing and making curvature (Wherever required) and fixing the railing with the necessary stainless steel nuts and bolts complete, including fixing the railing with the necessary accessories& Stainless steel dash fasteners, Stainless steel bolts etc. of required size on the top of the floor or the side of waist slab with suitable arrangement as per approved drawing, design and specification as per approved drawing, design and specificationss.

Providing and fixing factory made pre painted steel sheet in ridges having proper Gola of plain prepainted steel Sheets ISI marked Z-120 ) or hips 60cm (sixty centimetre) overall with hot dipped metallic zinc coated, Kolar Metal or its equivalent make over steel section, pre painted single skin trapezoidal profile sheeting 0.60mm (zero point six zero millimeters) thickness . Top coating with regular modified polyster (RMP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating of polyester to back coat of 5 (five) microns over 5 (five) microns primer coating including fixing with self tapping screws 5.5mm (five point five millimeter) dia and 5.5cm (five point five centimeter) length complete with all accessories as required with EPDM seal complete as per HPPWD specifications or as directed by the Engineer-in-Charge, up to all floor level, including carriage of materials within all leads, lifts, and other incidental. The rate including Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing valley 90 cm (Ninty Centimeter) overall 0.60mm (Zero point Sixty millimetre) thickprepainted steel sheet ISI marked Z-120of Tata/ Sail /Reliance/ Jindals steels in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coated of back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted G.I. limpet and bitumen washers complete as per approved drawing, design and specification.The rate inclusive of Octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 0.60 mm (zero point sixty millimeter) thick preprinted steel sheet ISI marked Z-120 in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 (twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) micron primer coating including Tata/sail/Reliance/Jindal fixing with prepainted iron J or L hooks, bolts and nuts 6 mm dia metre with prepainted limpet and rubber washers completed with all accessories as required within all leads and lifts and as per the direction of Engineer-in-Charge and other incidental. as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Octroi, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 30cm (thirty centimetre) wide 25cm (twenty five centimetre) deep plain 0.80mm (zero point eight zero millimetre) thick PG.I. sheet gutter of Tata/Sail with iron brackets 40x3mm (forty into three millimetre) size bolts and nuts and washers etcetera including making necessary conections with rain water pipe complete as per design within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate including Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing M.S. black plain sheet 2.00mm (one point sixty six two point zero millimeters) thick in facia/eaves boards/soffits /ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per HPPWD specifications and as direction by the Engineer-in-Charge, (base members of steel work shell be measured and paid for separately), including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing water proofing treatment in depressed slab shall be done with Dr. Fixit Torch shield (P-3180-3mm) Pidilite water proof coating shall be in two coats apply First coat of Dr. Fixit Flex to the clean and saturated surface maintaining a coverage 6-7 sft (0.60 Sqm) (zero point six zero squate meter) per Kg to achieve 1mm (one millimeter) thickness this coating shall also be executed up to 300mm vertically. The 2nd coat shall be applied in opposite direction after 4 to 6 hours of application of 1st coat then sprinkle sand on top surface of applied Dr. Fixit Fast flex white still tacky and the second coat. Then apply cement mortar 1:4 (one cement ist four sand) and mixed with Pidiproof LW over the floor with suitable gradient towords drain water pipe while the second coat of Dr. Fixit is still tacky. complete including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing flashing 38 cm (Thirty Centimetre) overall with 0.60mm (Zero point Sixty millimetre) thick prepainted sheet of Tata/Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 microns (Twenty microns) over 5 microns(five microns) primer coating + back coat of polyster of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks bolts and nuts 6mm (Six millimetre) dia meter & prepainted G.I. limpeet & Bitumen washer complete as per approved drawing, design and specification.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing on wall faces PVC (D-plast) or equivalent 150mm dia (one hundred fifty millimetre diametre) rain water pipes working pressure not less than 4.6 Kg (four point six) kilogram per square centimetre of finolex/relpipe/vectul/Reliance including filling the joints with approved adhesive complete including carriage of material within all leads and lifts and as per the direction of the Engineer-in-Charge and other incidentals.The rate including Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) dia PVC plain bend working pressure not less than 6 Kg ( six) kilogram per square centimetre on wall faces PVC (D-Plast) supreme Finolex or equivalent accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 150 mm (One hundred fifty millimetre) dia PVC shoe working pressure not less than 6 Kg ( six) kilogram per square centimetre on wall faces PVC (D-Plast) supreme Finolex or equivalent accessories for rain water pipes including filling the joints with approved adhesives complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing PVC Clamps of approved design to PVC rain water pipe including cost of cutting holes and making good the walls etc. as per approved drawing, design complete.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Steel work welded in built up section beams, joists, channel angle, tee frame work for ceiling flat with connection plates or angle cleats as in trusses and trussed purlins main and cross beams, hip and jack rafters purlins connect to common rafter and the like in building in position and applying a primer coat of red lead paint in trusses and trussed purlins in buildings including cutting, fixing, hoisting and placing in position including carriage of material within all leads and lifts and other incidentals as per the direction of the engineer-in-charge complete.The rate inclusive Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Steel work welded in built up section trusses and framed work, composed of beams, Joist, Channel, angles, Tees, flats and connecting plates or angle cleats etc as in trusses and trussed purlins,main and cross beams, hip and jack rafters, purlin connected to common rafters and the like in building including cutting, fixing, lifting hosting and placing in position completeand applying a primer coat of red lead paint in trusses and trussed purlins in buildings including cutting, fixing, hoisting and placing in position including carriage of material within all leads and lifts and other incidentals as per the direction of the engineer-in-charge complete.The rate inclusive Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surfaces with ready mixed paint of approved brand and manufacture (Narolac/Asian paint) and of approved shade brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying priming coat over new steel & other metal surfaces after & including preparing the surfaces by thorougly cleaning oil grease dirt and other foreign matter and scoured with brushes fine steel wool scrapes and sand paper complete.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with ready mixed paint of approved brand and manufacture (Narolac/Asian or equivalent paints) and of approved shade to give an even shade including cleaning the surface of all dirt, dust and other foreign matter enamel paint other than white complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning, oil, grease, dirt and sand papering and knotting with ready mixed paint brushing wood primer pink of approved brand and manufacture (Narolac/Asian paints) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

6mm thick cement Plaster to Ceiling in cement mortar1:3 (1Cement:3 Sand)The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on rough side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One Cement isto six sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One Cement isto six sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One Cement isto five sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

20mm thick (twenty millimetre) Cement plaster in pattern/Grooving on fair side of brick/Concrete /stone walls for exterior plastering upto all floor level including arises, internal rounded angles, chamfers and rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:5 (1Cement: five sand) above plinth level to floor two level as per Architectural drawing, design and specification.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

20mm thick (twenty millimetre) Cement plaster in two coats backing coat 10 mm (Ten millimeter) and finishing coat 10 mm (Ten millimeter) thick on fair side of brick/Concrete /stone walls for interior plastering upto all floor level including arises, internal rounded angles, chamfers and rounded angles not exceeding 80mm in girth and finished even and smooth with cement mortar 1:4 (1Cement: four sand) above plinth level to floor two level as per Architectural drawing, design and specification.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

15mm (fifteen millimetre) thick cement plaster in single coat on fair side of brick / concrete / stone walls for interior plastering upto floor all levels including arrises, internal rounded angles, chamfers and / or rounded angles not exceeding 80mm (eighty millimetre) in girth and finished even and smooth with cement mortar 1:3 (One Cement isto three sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.The rate inclusive of Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing Unistone 12mm (Twelve millimetre) cladding on Reinforced Cement Concrete, Suraface side as on faces of Arch masonry walls etc. on 12 mm (Twelve millimetre) thick cement plaster 1:3(One Cement isto Three sand ) and jointed with cement slurry including scaffolding etc. complete as per Architectural drawing, design and specification.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing 240x120 cm (Two hundred forty into one hundred twenty) centimeter Black board having 12mm (Twelve millimeter) thick green chalk board (non megnetic) with superior quality framing & square clamps fixed with the help of nylon sleves & screws as per site requirments . The board shall be fixed on the wall with specially designed j clamps. Blackboard shall have backing material of galvanized sheet 28mm.(Twenty eight millimeter) thick with top green surface for smooth writing with chalk over 11 mm (Eleven millimeter) thick. particle board. The board surface shall be non porus ceramic particles on the specially anodized aluminium Profile 20x15mm (Twenty into fifteen millimeter )with corners of black plastic. shall be size. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying Birla White/ J.K white two or more coats wall care putty over plastered surfaces after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final finish to the surface complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Finishing wall with weather proof exterior grade emulsion paint of Apex/Ultima of Dulex paint ,Asian/Nerolac Surksha Paint of approved brand and manufacture and of required shade on undecorated wall surfaces (two or more coats) to give an even after throughly brushing the surface to remove all dirt and remains of loose powdered material incluing applying of putty as required for making the surface complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and applying two coats of Asian Paints , Berger paint/Nerolac Surksha paint of approved shade fire retardant paint on cleaned wood / ply surface @ 3.5 sqm (Three point five square meter) per litre per coat including preparation of base surface as per recommendations of manufacturer to make the surface fire retardant Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two or more coats on new work complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Finishing walls with 100% (Hundred ) Premium acrylic emulsion Premium emulsion paint of Asian / Dulux /Berger paints/Nerolac paints (above Dado/skirting) paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives.New work (Two or more coats applied @ 1.43 litre/ 10 sqm. (One point four three liter per ten square meter) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm (Zero point nine zero liter per ten square meter) complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Wall Painting (Two coat) with Premium Enamel paint of Asian / Dulux /Berger paints/Nerolac paints (upto Dado/skirting) of approved brand and manufacture for interior grade on undecorated concrete/ stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for matting the surface smooth as per Architectural drawing ,design and specifications.or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Distempering with Acrylic washable distemper of Asian Paints/Nerolac Paints/Berger Panits/Dulex Paints (above Dado/skirting) with white colour of approved brand and manufacture(Two coats)and of required shade on undecorated wall surface to given an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth. as per Architectural drawing ,design and specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Applying two coats of Acrylic Washable emulsion of Asian paints / Berger paints/ Dulux paints/Nerolac paints (above Dado/skirting) of approved shade for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic,/special pigment siliceous aggregate anti fungicides anti-rusting & foaming in two coat including necessary putty to give smooth even surface, sand papered smooth complete as per Architectural drawing ,design and specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing mineral fibre false ceiling tiles at all heights of size 600X600x16mm (Six hundred into six hundred into sixteen millimeter ) dune 89 (Eighty nine) tilr of Armstrong of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance > 85%, Thermalconductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm (Zero Point three three Three) thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm (Fifteen into thirty two millimeter )of length 3000 mm,(Three thousand millimeter) cross T of size 15x32mm (Fifteen into thirty two millimeter) of length 1200 mm (Twelve hundred millimeter) and secondary intermediate cross T of size 15x32 mm (Fifteen into thirty two millimeter) of length 600 mm (Six hundred millimeter) to form grid module of size 600x600 mm (Six hundred into six hundred) suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm (Fifty millimeter) long 8mm (Eight millimeter) outer diameter M-6 dash fasteners, 6 mm (Six millimeter) diameter fully threaded hanger rod up to 1000 mm (One thousand millimeter) length and L-shape level adjuster of size 85x25x2 mm,(Eighty five into twenty five into two millimeter) spaced at 1200 mm (Twelve hundred millimeter) centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size 24x24X3000 mm (Twenty four into twenty four into three thousand millimeter) made of 0.40 mm (Zero point four millimetre )thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm (Four hundred fifty millimeter) centre to centre & 40 mm (Forty millimeter) long dry wall S.S. screws. The exposed bottom portion of all Tsections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights.The work shall be carried out as per specifications, drawings and as per directions of the engineer-incharge or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing of expansion joint system related with wall joint (internal/ external) location as per drawings and direction of Engineer-In- Charge. The joints shall be of filled up with polysterence back or rod base members, self aligning / centering arrangement and support . The material shall be such that it provides an Expansion Joints System suitable for vertical wall to wall/ wall to corner application, both new and existing construction in office Buildings & complexes with no slipping down tendency amongst the components of the Joint System. The Joint System shall utilize light weight with polysterence back or rod surfaces mechanically snap locking the multicellular to facilitate movement or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing plinth protection with 40mm (forty millimetre) thick interlocking paver blocks of NTC with 23 cm (twenty three centimetre) dia Half round R.C.C pipe for drainage purpose fixed over 10 cm (Ten centimeter) cement concrete1:4:8 (One cement is to four sand isto eight graded stone aggregate ) bending for pipe as per Architectural drawing, design and specifications and as per the direction of Engineer in Charge . The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government

Providing and fixing factory made PVC door frame of Raj shri (Code No. 1624) single rebate of any colours of size 50x47mm (Fifty into forty seven millimetre) with a wall thickness of 5mm (Five millimetre) made out of extructed 5mm (five millimetre) rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos.(Two) of 150mm (One hundred millimetre) long brackets of 15mmx15mm (Fifteen millimetre into fifteen millimetre) Mild steel square tube, the vertical door profiles to be reinforced with 19mm x19mm (Ninteen millimetre into Ninteen millimetre) Mild steel square tube of 19 Guage EPDM rubber gasket weather seal to be provided through out the frame including fixing of door fame to wall with Mild Steel screws 100 long with wooden or rawl plugs emebded in masonry complete as per manufactures specification & direction of Engineer-in-Charge.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and Fixing 100mm (One hundred millimetre) millimetre dia Mild Steel hollow pipe post for porch.as per Architectural drawing ,design and specifications. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in suspended floor roofs, landing and shelves and their support balconies, beams, Girders, bressumers and cantilever in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (one cement isto three sand isto six graded crushed stone aggregate 20mm (twenty millimeter) nominal size) and curing complete, in or under water, including pumping or bailing out water/dewatering, removal of slush which may arise at the time of laying under water complete excluding the cost of form work in foundation and plinth in all depths/heights as per HPPWD specifications and as directed by the Engineer-in-Charge including carriage of materials within all leads, lifts. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and laying heavy duty precast cement conrete inter locking paver blocks vibration technology compacted upto M-50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks including curing rubbing & polishing complete (Sub base concrete floor to be paid for separately) 60mm (Sixty millimeter) thick block as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing aluminium composite panel ceiling 600x600x15mm (Six hundred into six hundred into fifteen millimetre) including prepainted G.I Channel framing @ 600mm (Six hundred Millimetre) centre to centre complete as per approved drawing, design and specification.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing Acoustical panelling of 600x1200x25mm ( Six hundred into twelve hundred into twenty five millimeter ) of armstrong Acoustial complete in all respect as per approved drawing, design and specification.The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying polished 19 mm (Ninteen millimeter) thick green marble having round nosing on the top of 11.50 cm (Eleven point five millimeter) thick walls upto height 135 cm (One hundred thirty five centimeter) in 20 mm ( Twenty mllimeter) thick base in cement mortar 1:3 (One cement is to three sand ) including jointing with cement mortra (1:2) (One white cement is to two marble dust) with and adminiture of pigment to match the shade of marble .The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Supplying and fixing cast iron cover with rectangle frame 445 x 610 mm (Four hundred forty five into six hundred ten millimeter) light duty single seal pattern of the weight of cover to be not less than 23kg (Twenty three kilograme) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing 200 mm (Two hundred milimeter) wide cast iron rugs with chequered or rubbed non slip surface including fixing in man holes with 200 mm x 200mm x100 mm (Two hundred miliimeter into two hundred miilimeter in to one hundred millimeter ) cement concrete 1:3:6 (One cement isto three sand isto six graded /crushed stone aggregate ) 20 mm (Twenty millimeter ) nominal size complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Supplying and fixing water pump 1.00 HP (One Horse Power) of Kirlosker or its equavalent as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and laying Brick bat filling in soak pit including carriage of materials within all leads, lifts and other incidental, and as per directions of Engineer-in-Charge. The rate including Royality, Malkhana, Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing to wall ceiling and floor polythelene aluminium polythelene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply including clamps with one metre spacing complete with necessary pipe fitting including cutting, fixing and making good the walls ceiling and floor of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (20mm (Twenty millimeter) outer diameters)

Providing and fixing to wall ceiling and floor polythelene aluminium polythelene (PE.AL.PE) composite pressure pipe U.V stabilized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply including clamps with one metre spacing complete with necessary pipe fitting including cutting, fixing and making good the walls ceiling and floor of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (25mm (Twenty five millimeter) outer diameters)

Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm (twenty millimetre) to 40mm (forty millimetre) nominal bore by providing and fixing tee including cutting and threading the pipes complete. of approved brand and manufacture up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 110 mm ( Hundred ten millimeter) 4.00 mm to 4.60mm thick ( Four point to four point six millimetre) thick high pressure PVC spigot and socket, soil, waste, ventilaing pipe of supreme conforming to IS No. 13592-92 including fixing with approved adhesive complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 110mm (one hundred ten millimeter) nominal size.

Providing and fixing 75 mm ( Seventy five millimeter) 4.00 mm to 4.60mm thick ( Four point to four point six millimetre) thick high pressure PVC spigot and socket, soil, waste, ventilaing pipe of supreme conforming to IS No. 13592-92 including fixing with approved adhesive complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 75mm (seventy five millimeter) nominal size.

Providing and fixing P.V.C clamps ISI marked including finishing with approved design with steel screws and rawal plugs etc complete carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (One hundred ten millimeter) diameters.

Providing and fixing P.V.C clamps ISI marked including finishing with approved design with steel screws and rawal plugs etc complete carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (seventy five millimeter) diameters.

Providing and fixing P.V.C Heal Rest Confirming to IS No.14735-99 ISI marked including filling the joints with approved adhesive etc complete carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (One hundred ten millimeter) diameters.

Providing and fixing P.V.C Heal Rest Confirming to IS No.14735-99 ISI marked including filling the joints with approved adhesive etc complete carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (Seventy five millimeter) diameters.

Providing and fixing P.V.C Supreme plain bend confirming to IS-14735-99 including fixing with approved adhesive complete as er HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. Plain bend 110mm (One hundred ten millimeter) nominal bore/diameters.

Providing and fixing P.V.C Supreme plain bend confirming to IS-14735-99 including fixing with approved adhesive complete as er HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. Plain bend 75mm (Seventy five millimeter) nominal bore/diameters.

Providing and fixing P.V.C collars ISI -14735-99 fixing with approved adhesive in all leads, lifts of material and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (one hundred ten millimeter) diameters.

Providing and fixing P.V.C collars ISI -14735-99 fixing with approved adhesive in all leads, lifts of material and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (Seventy five millimeter) diameters.

Providing and fixing P.V.C Cowl ISI -14735-99 fixing with approved adhesive in all leads, lifts of material and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (one hundred ten millimeter) diameters.

Providing and fixing P.V.C Cowl ISI -14735-99 fixing with approved adhesive in all leads, lifts of material and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (seventy five millimeter) diameters.

Providing and fixing ISI marked 110 x 90mm (one hundred ten into ninety millimeters) nominal size P.V.C floor trap of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 110 x 75mm (one hundred ten into seventy five millimeters) nominal size P.V.C floor trap of self cleaning design complete including fixing with approved adhesive cost of cutting and making good the walls and floors etc. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 110 mm (one hundred ten millimeters) nominal size P.V.C P or S trap for vitreous China Wash down water closet squatting pan (Indian type Water closet Pan) complete including fixing with approved adhesive . complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing HIND WARE/Cera/Jaguar of star white orrisa pattern vitreous china wash down water closet squatting pan (Orrisa type W.C. pan Big size 580mmx450mm (Five hundred eighty millimetre into four hundred fifty millimetre) ISI No. 2556 Orissa Pan No-20090 white shade (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing IS marked seat No.-20087 of Hindware/Cera/Jaguar of star white /snow white vitreous China wash down water closet (European type WC pan) having size 570x350x390mm (Five hundred seventy into three hundred fify five into three hundred ninty millimetre) fixed with jet Pressure itegral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat cover to be measured and paid separately) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing IS marked seat No.-20087 of Hindware/Cera/Jaguar of star white /snow white vitreous China wash down water closet (European type WC pan) having size 570x350x390mm (Five hundred seventy into three hundred fify five into three hundred ninty millimetre) fixed with jet Pressure itegral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1 (one cement isto one sand) (Seat cover to be measured and paid separately) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government. (Divyang Toilet)

Providing and fixing to wall ceiling and floor high density polyethylene/ poly proylene 10 (Ten) litres capacity (Dual flush) European standard control low level flushing cistren (Sleek Plus) of Hindware/ cera/ Jaquar of star white/ snow white shade with fittings with a pair of brackets with fittings such as lead valve, syphon, 15 mm (Fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40 mm (Forty millimetre) dia C.P flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closst ( Overflow pipe to be measured and paid for separately) as per Architectural drawing, design and specifications. and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing G.I. Inlet connection for flush pipe with W.C. Pan.complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing (Solid type) coloured plastic seat and cover for wash down water closet with CP brass hinges and rubber buffers complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin DALTA No. 10010 of size 550mmx 400 (Five hundred fifty into four hundred ) with pedestal under counter salin with single hole for pillar tap with C.I or M.S brackets painted white including cutting hole and making good the same but excluding fittings make Hindware/Cera /Jaguar of state white/snow white shade .complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin Garnet No. 10080 of size 580mm x 430 (Five hundred eighty into four hundred thirty )millimeter under counter salin with single hole for pillar tap with C.I or M.S brackets painted white including cutting hole and making good the same but excluding fittings make Hindware/Cera /Jaguar of state white/snow white shade .complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous China wash basin Garnet No. 10080 of size 580mm x 430 (Five hundred eighty into four hundred thirty )millimeter under counter salin with single hole for pillar tap with C.I or M.S brackets painted white including cutting hole and making good the same but excluding fittings make Hindware/Cera /Jaguar of state white/snow white shade .complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government.

Providing and fixing vitreous china flat back No.-60002 bowl pattern urinal with auto cystern of HINDWARE or its equivalent in white shade including connection the urinal with waste pipe by means of white lead mixed with chopped hemp size 39 x 37.5 x 59 cm (thirty nine in to thirty seven point five into fifty nine centimetre) compelete including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 610 x 510 mm ( Six hundred ten in to five hundred ten millimeter ) with bowl depth 200 mm (Two Hundred millimeter ) stainless steel kitchen sink of diamond/Unik , approved standard ISI make with drain board and C.P. waste with C.I. or M.S. Brackets painted white including cutting holes and making good the same but excluding fitting.complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two millimeter) diameter Rubber Plug for wash basin heavy duty ISI makes No. 8931-7893) complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing Mixer for Kitchen sink with casted swinging of Hindare/ Jaguar /Cera make complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 32mm (thirty two millimeters) nominal diameters PVC waste pipe for wash basin or sink including brass check nut complete and carriage of materials within all leads, lifts and other incidental. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing two hole basin mixing faucet of Hindare/ Jaguar /Cera make complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 100 mm dia (One hundred millimeter) chromium plated grating of superior quality for floor, gully or nahani trap complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and laying 150mm (One hundred fifty millimeter) nominal bore/diameter PVC pipes of working pressure 4/6 fourto six kilogramme of Finolex/Relpipe(Reliance)/Vectus grade "A" and jointing with approved adhesive including testing of pipes and joints complete as per HPPWD specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 600x450mm (Six hundred into four hundred fifty millimeters) bevelled edge mirror of superior glass mounted on 6mm (Six millimeters) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 600x20mm (six hundred into twenty millimeters) C.P. CERA/Hind ware/Prayag brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing CERA/Hind ware/Prayag brass liquid soap plastic container with C.P. Brass lid and brackets fixed to wooden plugs with C.P. Brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing chromium plated brass toilet paper holder CERA/Hind ware/Prayag and brackets fixed to wooden plugs with C.P. Brass screws complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing cromium plated jet sparay of approved quality and colour with 1.50m( one point five meter) tube of CERA/HINDWARE/PRAYAG complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government

Providing and fixing 15mm (Fifteen millimeters) diameters C.P. brass bib tap ISI marked of CERA/HINDWARE/PRAYAG approved quality (superior or heavy type) and colour of prayag polymet symet bath assests or its equivalent complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass stop cock 15mm (fifteen millimetre) of CERA/HINDWARE/PRAYAG without Nuts and pipe complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing CERA/HINDWARE/PRAYAG 15mm (Fifteen millimeters) diameters C.P. brass Pillar tap with capstan head complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing PTMT push cock with pot No. 13011 of approved quality and colour 15 mm (fifteen millimetre) female thread. complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing C.P. brass angle valve 15mm (fifteen millimetre) of CERA/HINDWARE/PRAYAG without Nuts and pipe complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing brass full way valve with wheel of CERA/HINDWARE/PRAYAG complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government 15mm (Fifteen millimeters) nominal bore.

Providing and fixing C.P brass valve (Horizontal Plunger) with wheel of CERA/HINDWARE/PRAYAG complete upto all floor level as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST Sales tax or any other taxes imposed by the Government 15mm (Fifteen millimeters) nominal bore.

Providing and fixing ISI marked 45cm (forty five centimeters) long and 15mm (fifteen millimeters) nominal bore PVC connection pipe with brass unions complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 32 mm (Thirty two Millimeter) C.P. Brass waste for wash basin or sink complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing P.V.C Supreme or its equivalent single equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) diameters.

Providing and fixing P.V.C Supreme or its equivalent single equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (one hundred millimeter) diameters.

Providing and fixing P.V.C Supreme or its equivalent single equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (seventy five millimeter) diameters.

Providing and fixing P.V.C Supreme double equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 150mm (One hundred fifty millimeter) diameters.

Providing and fixing P.V.C Supreme double equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 110mm (one hundred millimeter) diameters.

Providing and fixing P.V.C Supreme double equal branch with oval access door, insertion rubber washer 3mm (three millimeter) thick bolts and nuts ISI marked including finishing with approved adhesive and carriage of material with in all leads, lifts and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government. 75mm (seventy five millimeter) diameters.

Providing and fixing 150mm dia ( one hundred fifty millimetre ) PVC door bend with oval acess door, D plast or equivalent insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 110mm dia ( one hundred ten millimetre ) PVC door bend with oval acess door, D plast or equivalent insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 75mm dia ( Seventy five millimetre ) PVC door bend with oval acess door, D plast or equivalent insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 150mm dia ( one hundred fifty millimetre ) PVC offset 45 (Forty five degree) ISI marked including fixing with approved adhisive complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 110mm dia ( one hundred ten millimetre ) PVC offset 45 (Forty five degree) ISI marked including fixing with approved adhisive complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 75mm dia ( Seventy five millimetre ) PVC offset 45 (Forty five degree) ISI marked including fixing with approved adhisive complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals.. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing three layer PVC water storage tank 1000 (one thousand) litres net capacity of IS : 12701 marked of sintex or its equvilant, G.I. inlet and outlet connection, 15mm (fifteen millimeter) nominal bore, ball valve and mosquito proof PVC cover with locking arrangment including hoisting upto all heights above ground level including carriage of material within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (one cement isto four sand isto eight graded crushed stone aggregate 40mm (forty millimeter) nominal size bedding for P.V.C pipes of internal diameter 150mm (One hundred fiftymillimeters) including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (1Cement : 3 Sand : 6 graded stone aggregate 40mm ( forty millimeter ) nominal size in haunching of S.W. pipes of the 150 mm (One hundred fifty millimeter) internal diameters including concrete for beddings necessary form work and curing complete including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing vitreous China pedestal of Hindware/Cera /Jaguar for wash basin complete including carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into one hundred twenty millimeters) glass shelf with C.P brass bracket and guard rail of CERA/Hind ware/Prayag complete fixed to wooden plugs with C.P brass screws including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing vitreous china Tooth brush and Tumbler holder including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Construting manhole with RCC top slab in 1:2:4 ( one cement isto two sand isto four graded stone aggregate) 20mm (twenty millimetre nominal size) ,foudnation concrete 1:4:8 (one cement isto four sand isto eight graded stone aggregate 40mm (forty millimetre nominal size) in side plastering 15mm (fiften milliemtre) thick with cement mortar 1:3 (one cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (one cement isto two sand isto four grade stone aggregate 20mm (twenty millimetre)nominal size finished smooth complete including curing and testing having inside size 800mmx800mm (eight hundred millimeter into eight hundred millimeter) and 500mm (five hundred millimetre) deep including C.I. cover with frame (light duty single seal pattern one) 455mm x610mm (four hunded fifty five millimetre into six hundred ten millimetre) internal dimension total weight of cover and frame to be not less than 38 kg (thirty eight kilogram )weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg (fifteen kilogram) with 300mm (three hundred millimetre) thick walls of square rubble masonry coursed with hard stones of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Constructing manhole with RCC top slab in cement concrete 1:2:4 (One cement isto two sand isto four graded stone aggregate 20 mm (Twenty millimeter)nominal size .Foundation concrete 1:4:8 (One cement is to four sand is to eight graded stone aggregate) 40 mm (Forty millimeter) nominal size inside plastering 15 mm (fifteen millimeter) thick with cement mortar 1:3 (One cement is to three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (One cement is to two sand isto four graded stone aggregate) 20mm (Twenty millimeter) nominal size finished smooth complete including curing and testing. Inside size 800mm x 800mm (Eight hundred millimeter into Eight hundred millimeter) and 1000mm (one thousand millimeter) deep including cast irin cover with frame (Light duty single seal pattern) 455mm x610 mm (Four hundred fifty five millimeter in to six hundred ten millimeter) nominal size total weight of cover and frame to be not less than 38 kg (Thrity eight killogramme) (Weight of cover 23 kgs( Twenty three kilogramme) and weight of fraame 15 kgs (fifteen kilogramme) with 200 mm (Two hundred milimeter) thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 ( one cement is to three sand) complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Constructing brick masonry chamber for under ground C.I. inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement is to five sand) Cast iron cover with frame (light duty) 355mm x 610mm (three hundred fifty five millimetre into six hundred ten millimetre) internal dimensions total weight of cover not less than 38 kgs.(thirty eight killogramme) (weight of frame 15 kgs.(fifteen killogram and weight of cover 23 Kgs.(twenty three killogramme) Reinforcement Cement Concrete top slab with 1:2:4 cement concrete mix (one cement : two sand : four graded stone aggregate 20mm (twenty millimetre) nominal size) foundation concrete 1:5:10 (one cement is to five sand is to ten graded stone aggregate forty millimetre nominal size inside plaster 15mm (Fifteen millimeter) thick with cement mortar 1:3 (One cement is to three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etctra complete. In side dimensions 455mmx610mmx450mm (four hundred fifty five into six hundred ten in to four hundred fifty millimetre) deep single pipe line including necessary form work and curing complete and carriage of materials within all leads , lifts and other incidental. The rate including Octroi Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply equal tees of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (20 mm (Twenty millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply equal tees of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025(25 mm (Twenty five millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply female elbows of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 15mm (Twenty millimeter into fifteen millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply female elbows Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 20mm (Twenty millimeter into twenty millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply female elbows Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 x 25mm (Twenty five millimeter into twenty five millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply female elbows of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620mmx 1620 mmx 20mm (sixteen into sixteen millimeter into twenty five millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply female branch tee of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x2025x25mm (Twenty five millimeter into twenty five millimeter into twenty five millimeter) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply male thread of Kitec/Kishan connector including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 15mm (Twenty millimeter into fifteen millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply male thread of Kitec/Kishan connector including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x25mm (Twenty millimeter into twenty five millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply Reducing tee of Kitec/Kishan for all branches including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (20 mm (Twenty millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply Reducing tee of Kitec/Kishan for all branches including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (25 mm (Twenty five millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply couplers of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (twenty millimeter outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply couplers of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (twenty five millimeter outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 1216 (twenty millimeter in to sixteen millimeter) outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x1216 (twenty five millimeter in to sixteen millimeter) outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x1620 (twenty five millimeter in to twenty millimeter) outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply equal tees of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (20 mm (Twenty millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply equal tees of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (25 mm (Twenty five millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply female elbows of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 15mm (Twenty millimeter into fifteen millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply female elbows of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 20mm (Twenty millimeter into twenty millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply female elbows of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x25mm (Twenty five millimeter into twenty five millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for hot water supply female branch tee of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620x1620x20mm (twenty millimeter into twenty millimeter into twenty millimeter) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for hot water supply female branch tee of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x2025x25mm (twenty five millimeter into twenty five millimeter into twenty five millimeter) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply male thread connector of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 15mm (Twenty millimeter into fifteen millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply male thread connector of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025x25mm (Twenty five millimeter into twenty five millimeter ) outer diameters) thread.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for hot water supply Reducing tee for all branches of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (20 mm (Twenty millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for hot water supply Reducing tee for all branches of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (25 mm (Twenty five millimeter) outer diameters)

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply couplers of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 (twenty millimeter outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply couplers of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 (twenty five millimeter outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 1620 x 1216 (twenty millimeter in to sixteen millimeter) outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 x 1216 (twenty five millimeter in to sixteen millimeter) outer diameters) .

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for Hot water supply reducer of Kitec/Kishan including with necessary pipe fitting including cutting, fixing and making good the walls of approved brand complete as per HPPWD specifications and as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government. 2025 x 1620 (twenty five millimeter in to twenty millimeter) outer diameters) .

Providing and fixing 600mmx300mm (Six hundred millimetre into three hundred millimetre) vitreous china Division plate for Urinals of hindware/cera/jaguar of star white within all leads, lifts of materials and other incidentals The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and fixing grab bar chromium plated 40mm (forty millimeter) dia steel pipes at 78cm (seventy eight centimeter) height with MS plates as per the direction of the Engineer-in-Charge. including carriage of materials within all leads, lifts and other incidentals. The rate inclusive of Malkhana, royality, octroi, toll tax , GST or any taxes imposed by the Government.

Providing and fixing 15 mm (Fifteen ) Millimeter nominal bore cromium plated urinal spreader of approved quality and colour complete. of approved brand and manufacture up to all floor levels complete as per HPPWD specifications including carriage of materials within all leads, lifts and other incidentals. The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government

Excavation in drains and channels etcetra in all heights and depths and in all kinds of soil including saturated soils comprising of pick work, jumper work, blasting work both in soft and hard rock, chiesling / wedging out of rock (Where blasting is prohibited) and their intermediate classification of soil setting out ture to the required lines, grade, width, cutting and trimming of side slopes as shown in the drawing and if water is met within the excavation due to springs, seepage, rain and other causes it shall be removed by the suitable divertion pumping or bailing out and excavation shall be kept dry whereever so required by the contractor at his own cost as directed by the engineer-in-charge and disposal of all surplus excavated soil in acquired width or at an approved dumping side including its stacking leveling dressing in all leads and lifts by head-load, mechanical transportation or by any other mode of transportation with all cost of labours, machinaries and other incidentals to complete the work as per HPPWD specification 1990 Vol.I. The rate inclusive of Octroi, toll tax , GST, Sales tax or any other taxes imposed by the Government.

Providing and laying 20 mm (Twenty millemeter ) nominal bore to wall ceiling and floor galvanised mild steel tubes (Midium grade) tube fittings and clamps including making good the wall, ceiling and floor, within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals . The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (Midium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 15 mm (fifteen millimetre) nominal bore within all leads and lifts and as per the direction of the engineer-in-charge The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

Providing and laying in trenches galvanised mild steel tubes (Midium grade) tube fittings (Earth work in trenches to be measured and paid for separately) 20mm (twenty millimetre) nominal bore within all leads and lifts and as per the direction of the engineer-in-charge The rate including Sales tax, toll tax , GST or any other taxes imposed by the Government.

ANIL MAHAJAN

H. C. Bansal Engg. & Contt.