Loading
Loading…
Loading…
| # | Company | Quoted % | Amount | Rank | Status |
|---|---|---|---|---|---|
| 1 | L1₹37.8 LAdmitted-Finance | L1 | Admitted-Finance | ||
| 2 | L2₹38.7 L+₹91,013.21 (2.41%)Admitted-Finance | L2 | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹73,994
Closing Date
14 Sept 2026, 4:00 pmClosed
Er. Balbir Singh, Executive Engineer (E)BM-I
3rd Floor Mohan Singh Place BKS Marg Connaught Place New Delhi
As per NIT
2026_NDMC_297998_1
NIT No. 40/EE(BM-I)/2026-27
Open Tender
Electrical Works
Works
45 days
Car Parking at Chanderlok Building BM-I(E) Divi ND
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹73,994
29 Sept 2026
5 Sept 2026
14 Sept 2026
5 Sept 2026
14 Sept 2026
5 Sept 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supplying, installation, testing and commissioning of EXHAUST BLOWER with Backward curved blower having 20,000 CFM capacity of total pressure of 50mmWG to be indirectly driven through an arrangement of belts and pulleys complete with base frames and motor of 15HP, the exhaust fans supplied and installed shall be of ‘Centrifugal Corrosion Resistant' type and shall be capable of delivering the design flow rate against all duct losses. The fans shall be robust in construction and suitable for continuous duty operation. It shall be mounted with ease of maintenance and shall be installed with proper vibration isolators to minimize vibration transmission to duct work and support structure. The impeller balancing shall be in accordance to VD12060, 06.3 standard. Power transmission should be from motor to impeller by means of a directly mounting the impeller on motor shaft. Motor Standard lEC three phase motors in accordance with IEC. Mounting B5 and B3 in motor-mounted (1P55) or cabinet-mounted versions. The fan shall be driven by a standard TEFC electric motor with class ‘F’ insulation and class ‘B’ temperature rise suitable for outdoor installation with IP55 protection and suitable for operation with 415V/3Ph/50 Hz electrical supply | 2 | Per Job | 7,13,568.78 | ₹14,27,137.56 |
| 2 | Supply, Fabrication & installation of G.l. duct of 22 SwG as per site requirement and hanging materials, supports nuts bolts, painting
complete as per site requirement with the help of ladder/ scaffolding as required at site. | 500 | Per Sq Mtr | 3,200 | ₹16,00,000 |
| 3 | Supplying installation, commissioning and testing of star-delta starter for 15 HP motor in existing panel with suitable over load relay and timer including SITC of ML2 contactor (3 nos.) including copper wiring of starter complete as Per site requirement | 2 | Per Job | 47,221.46 | ₹94,442.92 |
| 4 | Supplying and drawing of following XLPE aluminium conductor armoured power cable of 1.1KV grade including addling and proper fixing etc as required at site.
a) 3x25sq. mm | 100 | Per Mtr | 188.88 | ₹18,888 |
| 5 | SITC of aluminium powder coated linear grill of size 1200x300mmwith volume control damper | 80 | Nos. | 5,240.69 | ₹4,19,255.2 |
| 6 | Construction of exhaust blower room of size10ft (in length) x 10ft (width) x 12ft (height) in the basement of Chanderlok Building brick work with proper curing the same for making it strong with appropriate cement concrete mixture along with making a MS door of size 6ft x 4ft with desired thickness properly welded which shall be intersected at multiple levels on the base of the room in so as to build a strong structure. The Door shall be made of 4mm thick MS sheet with proper locking arrangement. The walls shall be made of Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 complete as per satisfaction of engineer in charge. The door shall be coated with steel primer and 2coats of paint including labour cartage etc. complete as The entire structure should be coated with good Quality epoxy primer and 2 or more coats of exterior synthetic enamel paint of shade desired by the Engineer- In-charge | 2 | Per Job | 70,000 | ₹1,40,000 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.20 MB
BOQ_397230.xls
BOQ • 0.24 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .