SPECIAL REPAIRS/REPLACEMENT OF EXISTING SECURITY FENCE WITH CHAIN LINK FENCE AT FAD UNDER GE(SOUTH) BATHINDA AT BATHINDA MIL STATION

Amount

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground, post embedded in concrete.

Dismantling barbed wire fencing) of any type.

Excavation in post holes (or similar holes) each not exceeding 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance not exceeding 50 mtr and making good surface in soft / loose soil.

M & L for PCC (1:3:6) type C2 using 40mm graded stone aggregate in foundations, filling and mass concrete, foundation of posts and struts..

S & F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wires, etc; flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc, and similar work conforming to Fe 290 Gde E-165.

Supply only chain link MS galvanised fencing, made out of GI wire of 10 to 8 gauge, aperture not exceeding 65 mm, weight not less than 3.5 Kg / Sqm etc, all as directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire. (Line wire shall be measured and paid for separately as supply only rate).

Supply only mild steel round bars 10mm dia and over, as in line wires for chain link fencingcut and similar work conforming to Fe 290 Gde E-165.

S & F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt not exc 5 cm, dia of neck 5 to 10mm.

M & L for painting to steel and iron surfaces of any description, not exceeding 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

S & F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured).

M & L for painting to steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surfaces.

M&L for preparing surfaces of ends of posts, backs of chowkats, etc, area tarred exceeding 0.1 Sqm but not exceeding 0.5 Sqm each and treated with tar or coal tar black paint.

ASW ENTERPRISES

M/s BHUPINDRA ENGINEERING WORKS

SHARDA ENTERPRIES

M/S VIAJY BUILDERS & DEVELOPERS

M/s Vandana Builders