REPAIR OF ROOF TREATMENT AND JOINERY WORKS AT OLD MAP QTRS CARIAPPA VIHAR UNDER GE KAMPTEE

Amount

Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed.

Material & Labour for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer's instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paint of 0.2Kg/Sqm over membrane complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m complete all as specified and directed.

Material & Labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and as directed.

All as per item No 4 above but half brick wall in CM 1:4 complete all as specified and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed.

Material & Labour for Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed.

Material & Labour for Rendering 15 mm thick on fair faces of brick work or concrete surfaces with CM 1:4 with liquid WPC on external walls finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only liquid water proofing compound complete all as specified and directed.

Preparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of Chalk whiting complete all as specified and directed.

Material & Labour for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area n. exc 1.50 sqm complete all as specified and directed.

Taking down door / window frame with shutter (without taking of shutter from the frame ) area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed.

Supply & Fixing Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete Gde Fe 410-W (Gde-E- 250)quality-A, complete all as specified and directed.

Supply & Fixing 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed

Supply & Fixing 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete all as specified and directed.

Supply & Fixing Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Supply & Fixing Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and directed.

Supply & Fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing complete all as specified and directed.

Supply & Fixing 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed.

Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed.

Supply & fixing 125 mm Aluminium pressed handles fixed complete all as specified and directed.

Supply & Fixing 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material & Labour for preparation of old steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed.

Supply & Fixing GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified and directed.

Supply & Fixing Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed.

Material & Labour for built in steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing complete all as specified and directed.

Supply & Fixing in repair 100 mm long SS butt hinges and fixed with screw/welded to frames etc complete all as specified and directed.

Demolition of cement concrete any description and in any position not otherwise specifically provided for complete all as specified and directed.

Material & Labour for 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as specified and directed.

Supply & Fixing in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed complete all as specified and directed.

Supply & Fixing PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed.

Supply & Fixing in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Supply & Fixing in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed

Dismantling water tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed

Supply & Fixing 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Supply & Fixing 1000 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 250 & n exc 500 litres complete all as specified and directed.

Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. & hositing if required reconnecting & re-fixing in position. (Cleaning repairing etc. measured separately).exc 500 & n exc 1000 litres complete all as specified and directed.

Material & Labour for Gun-metal, globe or gate valves, 15mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Material & Labour for Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Material & Labour for cement concrete type B0, (1:2:4) (using 12.5mm graded stone aggregate) as in benching/coping and the like including weathering slightly round or chamfered angles and throating complete all as specified and directed.

Supply & Fixing stack clamps made out of 25mm x 5mm flat iron & 16mm round iron stays including bolts & nuts and securing ends of stays for 100mm bore pipe complete all as specified and directed.

Material & Labour for Stack clamps out of 50mm by 5mm flat iron and 10mm dia round iron stays. Including bolts and nuts and securing ends of stays to wall or roof for 75mm pipe complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with Screw, complete all as specified and directed.

Supply & Fixing in repair 18 mm thick Alstone wood Polymer Composive Board ( WPC) in cupboard shutter and like with decorative on both side design fixed by drilling screws and brackets complete all as specified and directed.

Supply & Fixing 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet shelf, etc complete all as specified and as directed .

Supply & Fixing in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed.

Supply & Fixing magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed.

Material & Labour for Rendering dubbing coat over damaged irregular surface of chajjas roof projections/ ceiling/ facia etc average 15mm thick in cm 1:4 over cement slurry coat thick @ 3 Kg/sqm making the surface even followed by 5mm thick rendering in CM 1:3 furnished even& smooth including making of drip course as reqd complete incl roughening surface of old concrete by picking sweeping clean and washing with water complete all as specified and directed. Note: Rate for form work if reqd to be incl in the rate quaoted by the contractor.

Welding to existing steel door/gate, window in repairs n.exc 2.5 cm in length thickness of meteal exce 6mm but n.exc 9mm complete all as specified and directed.

Welding to existing steel window in repairs exc 2.5 cm in length but n.exc 5 cm in length thicknes of metal exce 6mm but n.exc 9mm complete all as specified and directed.

Supply & Fixing in repair 20 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 20mm-210g complete all as specified and directed. Make : Prayag

Note : The amount against Schedule of Credit on Page No. 36 shall be deducted from the total amount quoted against Sch 'A' while deriving lum Sum for Acceptance.

M/s Rahul Traders

M/s T.S.JOHAR

M/s Shrangi Rishi Construction

DEESHA CONSTRUCTIONS

Bidder Name

M/s Shrangi Rishi Construction

DEESHA CONSTRUCTIONS

M/s Rahul Traders

M/s Jagdish Staioners and General Stores

M/s T.S.JOHAR