REPAIR/MAINTENANCE OF SANITARY SYSTEM, ROOF TREATMENT JOINERY AND OTHER ALIED WORK UNDER AGE BR-II AT NEW CANTT ALLAHABAD

Amount

Dismantling structural steel work including doors, gates but excluding framed trusses etc complete all as specified.

M&L for structural steel work with rolled mild steel sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-290 (Gde E-165) quality A complete all as specified and directed.

Dismantling of AC sheet corrugated/semi corrugted sheets in wall cladding or in roof covering complete all as specified and directed.

M&L 6mm thick non-asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed.

Fixing only 6mm thick Asbestos fibre cement corrugated or semi corrugated sheets as in roofs, walls etc. fixed with 'L' type or 'J' type hooks or cranked hook bolts complete all as specified and directed. NOTE: AC sheets retrieved from dismantling shall be used.

S&F 6mm thick non-asbestos fibre cement two piece serrated ridges for corrugated or semi-corrugated sheet fixed with 'L' hooks or 'J' hooks or cranked hook bolts complete all as specified and directed.

all as per item no 6 here in before but fixing only

Demolition of brick work built in cement mortar or cement lime mortar

M&L for brick work with fly ash old size bricks straight or curved on plan exc 6 m mean radius built in cm (1:6) all as specified and directed.

ditto - but except brick (brick used obtained from demolition) complete.

Dismantling plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering

M & L for prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

M & L for prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified & directed.

Dismantling, floor hearth or wall tiling inclduing cement mortar bedding and removing rubbish off the premises complete all as specified and directed.

S&F first or premium quality joint free non skid Ceramic colour tiles, 7 to 8mm thick (square/ rectangular) , area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for first or premium quality joint free non skid, ceramic “coloured” tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm thick, in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L first or premium quality joint free non skid, ceramic “coloured” tiles 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for first or premium quality joint free non skid, Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L first or premium quality joint free vitrified ceramic coloured tiles of 7 to 8mm thick area of each tile exceeding 0.18 and n.exc 0.36 Sqm in floor, shelves etc, set and jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for first or premium quality Vitrified Ceramic coloured tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 and n.exc 0.36sqm , in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for first or premium quality Glazed ceramic coloured tiles 300 mm x 200 mm x 6 mm to 7 mm thick, in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles 7 to 8mm thick area of tile exceeding 0.13 and n.exc 0.18 Sqm in skirting, dados, risers to steps, etc se and jointed in neat cement slurry, and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab and polishing completeincluding rubbing and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete of item all as directed.

M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto asper item no 23 and pointed in coloured cement to match tiles over and including 10mm thick rendering or backing layer in cement mortar 1:4 complete all as specified and directed.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick screed bed in cement mortar 1:6 all as specified.

M&L for Granite 20mm thick (of any type) work (table rubbed and polilshed)for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing in wite cment (1:2) using marble dust with admixture of pigment to match with shade of granite over 10 mm thick rendering in cement mortar 1:4 all as specified.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal to store complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 15mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

S&F Steel water tubes, medium grade, ISI marked, galvanised, 25 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and directed.

Refixing old 15mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 20mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Refixing old 25 mm dia bore steel water tubing & connection with new fitting in new or old position fixed to wall, ceiling or laid in floors complete all as specified and directed.

Dismantling of brick tiles or terracing tiles, single layer on roofs complete

Demolition of mud in roofs, any thickness, including plastering and leeping ( whether full thickness removed or only a part thereof).

Removing of surplus excavated/demolised materilas to a distance n.exc 50m and deposited where directed at a level n. exc 1.5 m above the starting point.

M&L for PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in roof curbing, padding over roof slab complete all as specified and directed. (Note - Average thickness shall not exceed 40mm complete all as specified and directed.

M&L for rendering 10 mm thick on concrete surface when concrete is green on roof surface in cement mortar 1:4 all as specified and directed.

M&L for normal water proofing treatment on roof slab consisting with following operations:- (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane. (iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above.

M&L for preparation of new or previously untreated surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of aluminium paint, complete all as specified and directed.

S&F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.

S&F Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, fancy type, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete all as specified and directed.

S&F in repair CP Stop valve/angle valve 15 mm bore, fancy type cromimum plated with long shank and cup (concealed type), high pressure crutch or butter fly handle screwed both ends screwed for iron pipe or for unions complete all as specified and directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 1000 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places with fittings and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair rotational moulded,multilayer HDPE water storage tank of 500 ltrs capacity(Cylindrical vertical with closed top) ISI marked fixed in position on existing places complete and refixing of inlet, outlet & overflow pipe etc, complete all as specified and as directed.

S&F in repair PVC waste pipe 32mm dia, 60 cm long for WHB/urinal with cup, complete all as specified.

S&F in repair PVC waste pipe 40mm dia, 60 cm long for Sink with cup, complete all as specified.

S&F in repair PVC connection 15 mm size with P.T.M.T nuts of length 450mm complete.

S & F in repairs wall mixers with provn for over head showers with 115 mm long bend pipe on upper side connecting legs and wall flanges complete all as specified and directed

S&F Ball Valves 20mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms).

S&F in repairs Ball Valves 20 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms).

S&F in repairs Ball Valves 25 mm bore dia of pipe high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight 20mm-210gms).

S&F in repair PVC valve, symphonic action type, flushing cistern 10 liters capacity low level white with inlet ,ball valve ,float and handle including brocket complete all as specified and directed by engineer in charge

S&F in repair for grating doom 100 mm dia of PTMT.(Minimum weight 25gms)

S&F in repair bib taps with wall flange 15mm bore, fancy type, quarter/half turn, brass chromium plated, long body with capstan head and cup screwed down, screwed for iron pipe or for brass ferrule including accessories complete all as specified and directed.

Demolition and breaking up drain waste pipes (SGSW, AC or RCC, CI ) of internal dia 75/110 mm, set in cement mortar complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 110 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes, Single socketed, in any length with rubber ring joints, fixed to walls 75 mm bore complete all as specified and directed.

S&F PVC (SWR) bends any radius, 75 mm bore complete.

S&F PVC (SWR) bends any radius, 110 mm bore complete.

Running welding in repair thickness of metal to be welded Exc 6 mm but n exc 9mm

M&L for water proofing treatment to sunken floor with polymeric water proofing membrane after cleaning the surface by wire brushes,brooming,removing dust and applying treatment as under :- (a) M&L Plastering 15mm thick in CM 1:4 using 100% coarse sand on roof including WPC 3% by weight of cement. (b) Applying a coat of bitumen primer conforming to IS-3384 - 1965 @ 0.50 lit/Sqm and allow to dry. (c) Applying one coat of hot blown bitumen grade 85/25 as per IS-702-1988 @ 1.20 Kg/Sqm of each coat applied over primer incl cleaning of surfaces . (d) Supply and laying polymeric water proofing membrane of 3mm thick with consists of a centre core 90 micron thickness molecular high density polyethylene film protected on both sides with a high quality polymeric asphaltic mix will be protected on both sides with20 micron HMHDPE film, weight not less than 3.00 Kg/Sqm over area including overlapping as per manufacturers instruction. (e) M&L for for applying a tack coat of hot blown bitumen as per IS 702-1988 applying evenly on top of polymeric water proffing membrance @ 1.20 Kg/sqm. (f) M& L for blending of course dry sand @ 0.75 KG/Sqm

S&F in repair vitreous china urinal, half stall type (flat back), of size 635x395x420mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

S&F in repair vitreous china urinal, bowl type, of size 465X355X265 mm, white, with grating and union for discharge pipe (excluding flushing cistern) including 32mm dia PTMT coupling and waste pipe, providing and fixing plugs, bedding urinal against wall in CM 1:2, complete all as specified and directed.

S&F, in repair vitreous china wash down water closet of "Orissa" pattern size 580 x 440 mm white with integral foot rests including removing filled lean concrete from sunken portion and putting of lean concrete after treatment of sunken slab, connection to trap and to flushing pipe etc complete and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.

S&F in repair plastic water closet seat cover, white, closed pattern with flat bottom & cover and aluminium anodised hinging device and fixed WC pan complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick wall in CM 1:6 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick wall or concrete in CM 1:4 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for 5mm thick rendering on fair faces of brick or concrete ceiling surface in CM 1:3 finished even and smooth with out using extra cement complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of cement base paint over a coat of cement wash complete all as specified and directed.

M&L for preparation of new plastered surfaces , applying white cement based wall care putty(Birla/JK white) on the surfaces with minimum 2 to 3 mm uniform thickness making surface absolutely smooth by grinding with sand paper and applying two coats of oil emulsion distemper over a coat chalk whiting of approved shade on old surface of wall complete all as specified and directed.

M&L for preparing of newly plastered ceiling surface and applying two coats of white wash complete all as specified and directed.

M&L for preparing of newly plastered wall surface and applying two coats of white wash complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of white wash on old surface of wall complete all as specified and directed.

M&L for preparation of old distempered surface of wall including cornices etc. by washing, rubbing down,scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and stopping of distempered surfaces and applying one coat of oil emulsion distemper of approved shade on surface of wall complete all as specified and directed.

M&L for preparing old plastered decorated surfaces of wall and applying two coat of exterior emulsion paint (Apex/Weather coat) white or tinted as approved complete all as specified and directed.

M&L for preparation of old painted surface of wood and wood based materials by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of old painted surface of steel and iron by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots of any discription, not otherwise described, over 10cm in width or girth and applying one coat of synthetic enamel paint, white or tinted complete all as specified and directed.

M&L for preparation of old plastered or unplastered surface of wall including cornices etc. by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and removal of vegetation and applying one coat of Cement Base Paint white or tinted of approved shade complete all as specified and directed.

Taking down door chowkhat with shutter area n-exc 1.5 Sqm each(without taking off shutters from the frame) complete all as specified & directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but not exc 4 Sqm each (without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of wooden or aluminium door of any description n. exc 1 sqm each complete all as specified & directed.

Taking down shutters of wooden or aluminium door any description area exc 1 sqm and n exc 2 sqm each complete all as specified & directed.

Refixing wooden or aluminium door shutters of any description not exceeding 1 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete

Refixing wooden or aluminium door shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each in the same opening after taking down, easing and adjusting including refixing builders hardware, glass etc as required and renewal of unserviceable screws complete.

S&F for 2nd class hardwood plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified & directed.

S&F factory made 30 mm thick flush shutter solid core construction with block board core & plywood face panels commercial type on both sides incl 5mm thick teakwood leaping alround complete all as specified & directed.

M&L for PCC 1:3:6 type C-1 using (20mm graded stone aggregate) as in bed blocks for hold fast,Coping errection of posts etc complete all as specified & directed.

M&L mild steel work as in bands, straps, supports or stays for rain water, ventilating pipes including bolts, if required, hooks (stay) heavy for large gates, hooks and pintle hinges, large hasp and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans and similar articles conforming to Fe-290 Gde E-165 complete all as specified and directed.

S&F 2nd class hardwood factory made door, 35 mm thick, glazed and skeleton shutters, open rebated and prepated to receive glass gauze etc (with sash bars) edges of framing plain, chamfered or rounded materials and revated sash bars any number , edges of framing plain chemfered or rounded fitted with cut and mitred beads for securing glass in door etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (a) complete all as specified & directed.

S&F for 2nd class hardwood glazed and skeleton window shutter 30mm thick, divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, to receive glass, gauze, etc or provided with styles and rails as specified in SSR part 1 section 8, clause 8.20 (b) complete all as specified & directed.

M&L work Mild steel conforming to Fe 410-0 or Fe 310-0 in framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes; framed guard bars; ladders; railings and similar work complete.

S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete with glazing bar, dovetailed or welded complete.

S & F factory made steel window with side hung shutter including projecting type hinges with steel handle, steel peg stay, complete without glazing bar, dovetailed or welded complete.

S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete

S&F solid prelam moulded PVC double door frame of size 50mm x 95mm made single side prelam PVC sheet used instead of plain colour PVC sheet duly reinforced with MS tube.

S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed

S&F Anodised aluminium frame powder coated for doors, windows, ventilators, partition, posts to sustain curtain rail etc with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

S&F Anodised aluminium door powder coated shuttrs, aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door, hinges, anodised aluminium snap beading screws with provision of double action floor spring etc complete all as specified and directed.

S&F Anodised aluminium powder coated window and ventilator shuttrs, side hung type, without sash,aluminium sectioin weighing 0.55 kg/m including necessary joinin cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long(1no), hinges type B 21 100mm long( 2no) suitable handle (1no) complete all as specified and directed.

M & L applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces complete.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new steel surfaces , over 10 cm in width or grith not other wise described complete.

S&F for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple complete all as specified & directed.

S&F in repair for galvanised M S Wire cloth of 0.56 mm nominal dia of wire and average width of aparture 1.18 mm fixed with tinned tack for galvanized wire staple all as specified & directed.

S&F in repair 18/19mm thick prelaminated medium density fibre board,commercial type,interior grade adhesive as in cup board shutters/ shelves and pelmets etc., fixed with screw/ nails including 4mm thick teak wood lipping duly french polished alround complete all as specified and directed.

S&F in repair 18/19mm thick prelaminated particle board,interior grade,(one side decoratve and other side balancing white), flat perssed, single or three layer type with BWR adhesive fixed to Timber frame work etc., fixed with screw complete all as specified and directed.

S&F continuous (piano) hinges, mild steel, bright finished or electro galvanised with width of flap 30mm (when open) complete all as specified and directed.

S&F magnetic catches with steel body 'H' type fixed to shutter complete all as specified and directed.

M&L for 4mm thick sheet glass ordinary quality and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

M&L for 4mm thick sheet glass Figured glass, pin head type and glazing with oil putty in square n-exc 0.5 sqm in each pane complete all as specified & directed.

S&F for 5.50mm thick sheet glass ordinary quality and glazing with rubber beading/gaskit in square exc 0.5 sqm in each pane complete all as specified & directed.

S&F in repair Mild steel tubing of 25 mm dia with PVC coating for curtain rod fancy type including fancy type PVC rings and CP brass brackets (wall to wall or flush to wall) for securing to curtain rod complete.

S&F in repair floor door stopper overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised,with hard drawn steel spring complete all as specified and directed.

S&F in repairs aluminium (Die cast) body Door closer hydraulically regulated,designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. (Make- Sandhu/Samrat)

S&F in repair Aluminium Lock,4 Lever,100mm long fixed to Aluminum doors complete all as specified and directed Make Godrej/Link

S&F in repair 100mm mortice lock four levers (vertical type), of brass body

S&F in repair double action floor spring hydraulically regulated made up of aluminium alloy sheet foundation box with stainless steel cover fixed to Aluminium doors complete all as specified and directed. Make Sandhu/Samrat

S&F 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple.

S&F MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F MS 150 mm pressed handles oval type stove enamelled black complete all as specified & directed.

S&F for MS barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

S&F in repair 300mm long MS sliding door bolts , plate type ,stove enameled black , with bright bolt not less than 12mm dia with and incl minimum of 6 bolts and nuts ,four on bolt plate and two on staple.

S&F in repair 300mm long aluminium alloy anodised sliding door bolts , with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium ally .

S&F in repair MS butt hinges cold rolled meium weight of size 100mm etc complete all as specified & directed.

S&F in repair Aluminium alloy handles 150 mm long fabricated type complete all as specified & directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified & directed.

M&L for Mild steel plain black sheet 1.25 mm thick in hearths; covering to door shutters; ducts, etc, cut to size, edges beaded if directed, holes punched; including round headed screws, clout nails or rivets, fixed to wood or steel members with plain 40mm lap joints or welded/riveted seams including bending, turning up, mitred angles, stopped ends, etc as required all as specified & directed.

S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified and directed

S&F 100mm long aluminium alloy handle cast type anodized. complete all as specified and directed

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete all as specified and directed.

S&F 4mm thick E-boards tiles (Make: Everest) false ceiling with powder coated GI snap grid frame work (Make: Armstrong/Saint Gobain or equivalent as approved) including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type BO/Cement mortar 1:3 complete all as specified and directed including all necessary drilling and necessary arrangement to fix electrical items as under:- (a) 25x25x1.6mm thick GI angle powder coated duly plugged @ 600mm centre to centre along perimeter of wall. (b) 25x25x1.5mm thick GI tee powder coated as main and cross runners suspended with 1.6mm dia GI wire suspenders with adjustable clamps and dash free fastners plugging in RCC slab placed @ 600mm centre to centre from perimeter of wall. (c) Fixing of 4mm thick E-boards tiles of size 595x595mm of approved texure and finished complete with two coats of oil emulsion distemper on ceiling. NOTE: The complete ceiling work shall be done as per manufactures instruction and as directed.

S&F solid PVC wall lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing with solvent on to wall to make PVC frame as per specifications complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.

M&L for PCC type E2 1:5:10 using 40mm graded aggregate as in sub base complete all as specified and directed

M&L for 100mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in flooring complete all as specified and directed.

Demolition of Stone slabs and tiles laid dry and dry or pointed of any description or thickness infloors, aprons etc.

M&L for 80mm thick M-40 grade factory made rubber moulded vaibratory cement concrete coloured interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick sand cushion and joints filled with sand complete including dismantling of tiles all as specified and directed.

M&L for rubber moulded chequered cement concrete coloured tile 30cm X 30cm X 25 mm thick with grey cement and pigment set jointed and pointed in neat cement siurry over screed bed or bedding layer 15 mm thick in CM (1:6) in floor all as specified including dismantling of tiles

S & F in repair waste coupling of CP (half or full threaded) (minimum weight 32mm- 45gms/40mm-60gms of 32mm dia for WHB

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S&F in repair PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.

S&F in repair stainless steel soap dish fixed to plugs with chromium plated brass screws complete

S&F in repair jet nozzle for EWC complete with all fittings complete all as specified and directed.

S&F in repair two way angle valves /tap with flange 15mm bore, fancy type, quarter turn, cast copper alloy, chromium plated with long shank and cup screwed down, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair toilet paper holder, superior quality, brass chromium plated, fancy type complete all as specified and directed. Make: Prayag/ Ideal Orient/ Plumber.

S & F in repair Brass CP central hole mixer for mixing hot & cold water screwed down high pressure, with long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore for WHB complete.

S&F in repair health faucet with 1m long flexible CP pipe with wall hook complete with all fittings complete all as specified and directed.

S&F in repair Brass chromium plated shower rose 65 to 90 mm size , shower Arm with swivel joints complete all as specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of 250 to 500 ltrs capacity and from mouth of curculating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning all and specified and directed.

Cleaning and removing all scale and dirt etc from water storage tank of 500 to 1000 ltrs capacity and from mouth of curculating pipes etc and writing date of cleaning of the tank with paint 75 mm height in DD/MM/YY patern and refixing the cover after cleaning all and specified and directed.

Siddhi Constructionn

YASH ENTERPRISES

Anupravesh Enterprises

M/S A P CONSTRUCTION

KHALSA BUILDER

A R ENTERPRISES

Channa Brothers and Co.

SAP ENTERPRISES