S/R to Vigilance Office Malkhana Department such as providing ceiling, plastic-felt, crill sheet AND concrete work etc. at Berhampur for the year 2025-26. BUILDING

Dismentalling and removing old ceiling after carefully removing the nuts including stacking the materials for re use and removing the debris within 50m lead including cost of all labour with T and P etc complete. Excluding GST

DISMANTLING of GCIAC sheet roofing and removing the debris within 50m lead including stacking the useful materials for reuse with cost of all labour and T and P required for the work etc. completeexcluding GST

Providing and laying water proof with POLYMERIC BITUMENIOUS MEMBRANCE PLASTIC FELT of 2.25 kgsqm and 1.5mm thickness consisting of layers having centre to centre of 20 microns thermoplastic high molecular high density polyetgylene HMHDPE film of grade 2504 including priming the surface with bitumenious primer 0.3kg sqm providing a coat of hot blown bitumen of 1.32 kgsqm providing a coat of hot blown bitumen of 1.32kg per sqm applying and laying plastic felt membrance with 10cm overlap adhered to blown bitumen of 8525 of 9015 grade and covered with a layer of hot blown bitumen 1.2kgsqm etc complete with cost of all materials, labour, cess etc. complete.excluding GST

CEMENT CONCRETE 124 in F and F using 12mm 12 size crusher broken hard black granite chips of approved quality from approved quarry including hoisting, lowering and laying concrete, watering and curing for four weeks with cost conveyance cess and royalties of all materials and labour with T and P required for the work etc. complete in all respect in all floors.excluding GST

R.C.C. work 11.53 M20 having minimum compressive strength in work test of 200kgsquare meter in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and 516 using 12mm to 20mm size 20mm not to exceed 25% hard black broken granite stone chips of approved quality and from approved quarry including hoisting lowering laying and compacting concrete, watering and curing for 4 weeks centring, shuttering and finishing the exposed surfaces smooth providing grooves to beads where necessary, providing drip cess and proper randy the joint with wall surface where necessary and providing fan hooks as per requirement and ceiling smooth to receive white washing or painting including cost, conveyance, royalties, of all materials and labour with T and P required for the work etc .complete in all respect but excluding cost of binding wire of 18 to 20 gauge and labour charges for straightening cutting bending binding and laying the grills and placing in proper position etc. complete as per specification and direction of the Engineerincharge. excluding GST

Straightening bent up or coiled HYSD rods, cutting bending cranking hooking welding or jointing if required the M.S. Rods or Tor steel and binding wires and binding tying the grills, hoisting, lowering and placing in proper position as required for RCC works with cost conveyance of m. s. rods or tor steel and binding wires of 18 to 20 gauge and labour with T and P required for the work etc. complete in all floors weight of binding wires will not be made on weight of m. s. rods or tor steel only.excluding GST

Supplying providing fixing of MS grill with cost and conveance royality and taxes of all materials and labour with T and P required for the work etc complete in all respect as per drawing and techincal specification and as directed by the engineer in charge. Excluding GST

Providing fitting and fixing plain formed METASHIELD CRILL STEEL SHEET standard back cost coloured 0.5 nominal TCT 600mm in standard length at 300mm with supporting steps jointing materials etc. including cost of all materials, machineries, T and P etc. Metashield EPG10 Grace special polyester colour coating of 20 micron DFT on exposed surface and 5 micron DFT on unexposed surface over 5 micron DFT of special primer on both surface on OCRCA steel of minimum yield strength 240 mpa with hot dip zinc coating moss of 120gm confirming to IS 277 etc. including cost conveyance of materials and labour with T and P required etc. complete.excluding GST

Providing fitting and fixing of PARTITION walling OEL aluminium anodized section no. 9210 and 9207 as single groove and double groove respectively and horizontal and vertical member and OEL section 4660 as tapered clip for fixing up 12mm thick prelaminated board Nova pan make and jointing angle no. 1855 etc. with cost of all materials, labour cess etc. complete. excluding GST

Providing and fixing of aluminium door with OEL anodized aluminium DOOR section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick prelaminated board fixed on door frame by means of tapperd clip no. 4660 and the frame to be completed by means of jointing angle no. 1855 including cost conveyance cess of all materials and labour with T and P required for the work etc. complete as per the direction of the EngineerinCharge. excluding GST

FLY ASH BRICK 23cm x 11cm x 8cm masonry in cement mortar 16 after immersing bricks for six hours in water before use in Superstructure using clamp burnt bricks of 9 size having a crushing strength of not less than 50 kg per sqm including splays cutting, circular moulding chamfering and corbelling, watering and curing for 7 days after immersing the bricks in water for six hours before use etc. complete including cost conveyance cess and royalties of all materials and labour with T and P required for the work etc. complete in all respect in all floors.excluding GST

16 mm 58 thick cement plaster 16 finished smooth to inside surface of 9 thick brick wallsstone masonry after racking out the joints including watering and curing for 7 days with cost conveyance cess and royalties of materials and labour with T and P required for the work etc. complete. excluding GST

Supplying providing fixing of MS grillgatewindow with cost and conveance royality and taxes of all materials and labour with T and P required for the work etc complete in all respect as per drawing and techincal specification and as directed by the engineer in charge. Excluding GST 67

Wall painting two coat with PLASTIC EMULSION PAINT of approved shade and approved make to give an even shade after scrapping old paint with scrapper, washing with soda water including cost conveyance cess and royalties of all materials and labour with T and P required for the work etc. complete in all respect in all floors. excluding GST

Painting two coat with any approved paint to old WOOD work and iron work including sand papering to polishing the surface smooth with cost conveyance cess and royalties of all materials and labour with T and P required for the work etc. complete in all respect in all floors.excluding GST

Providing fitting and fixing of cup board suing 19mm thick water proof ply laminated both side sunmica using abhesive for pasting and fitting with modul tip cup boosher for using as top and bottom drawer resting on GI channel laminated top using 12mm thick glass for sheves 4 nos including cost conveyance labour with T and P etc complete. Excluding GST

Supplying fitting and fixing up window sliding type made up aluminium section 9778 as windows frame section no 4096, 9777 and 3994 as shutter frame with 5 mm thick black glass as panel fitted with rubber beading locking arrangement including all fitting cost of all material taxes labour T and P etc complete as per the direction of the Engineer in charge. excluding GST