Construction of ACR at Primary School Karna Zone Inderwal District Kishtwar under Samagra Shiksha.

Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge All kinds of soil :

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: 25 meter beyond 1 m from cutting edge

Providing and laying in position cement concrete of specified grade including curing but 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size)excluding the cost of centring and shuttering. All work upto plinth level with.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts ans sturts, etc. upto floor five level excluding cost of centring, shuttering, fmishing and reinforcement 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size:

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Thermo-Mechanically Treated bars.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Centering and Shuttering including strulling, popping and removal of form work: Foundation and Plinth:

Centering and Shuttering including strulling, popping and removal of form work: Lintel, beams, plinth beams, girders, bressumers and cantilevers.

Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand)

Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level

Random Rubble masonry with hard stone in superstructure above plinth level and upto floor five level, including levelling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like: Cement mortar 1:6 (1 Cement : 6 coarse sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded

Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G. I limpet washers or with G. I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusse 0.50 mm thick with zinc coating not less than 27 5gm/m 2

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding. 250x32 mm (nominal size )

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) :Natural colour insulating board 12 mm thick.

Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo Fir wood

Providing and fixing wooden moulded corner beading of size 50 x 50 mm (base and height) of triangular shape to the junction of paneling etc. with iron screws, plugs and priming coat on unexposed surface etc.complete.Second class kail wood

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately)2nd class Kail wood

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al!complete as per direction of engineer- in charge. Second class kail wood 30 mm

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. 12 mm thick Coir Veneer Board (conforming to IS: 14842)

Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class Kail wood 30 mm

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete:2nd class teak wood 50 x 12 mm

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. complete. 50 mm thick with 20mm nominal size stone aggregate.

Cement plaster in 1:6 ( 1 cement:6 fine sand ) ,15mm thick.

12 mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 fine sand)

6 mm cement plaster to ceiling of mix 1 : 3 (1 cement : 3 fine sand)

Providing and Applying white cement based putty of average thickness 1mm of approved brand and manufactured over the plastered wall surface to prepeare the surface even and smooth

Distampering with oil based bound washable distemper of approved brand and manufactured on wall surface new work ( two or more coar) ocer and including priming coat with cement primer

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two or more coats on new work

Providing and fixing aluminium sliding door bolts ISI marked anodize ( anodic coating) not less than grade AC10 as per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete (300 x 16)mm

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (100 x 10 mm)mm

Providing and fixing Aluminium tower bolts ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with screw etc complete (200 x 10)mm

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 125mm

Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100mm

Carriage of Sand by mechanical transport including loading , unloading & stacking complete lead upto 15 km

Carriage of Stone aggregate below 40 mm size by mechanical transport including loading , unloading & stacking complete lead upto 25 km

Carriage of sand by Manual means including loading , unloading & stacking complete lead upto 1000 mtr

Carriage of stone aggregate by Manual means including loading , unloading & stacking complete lead upto 1000 mtr

Carriage of stone by Manual means including loading , unloading & stacking complete lead upto 500 mtr

Please Enable Macros to View BoQ information