Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l-1₹15.0 LAccepted-AOC R O SKERBUCHAN TEH KHALTSI LEH LADAKH 194106 | LEH LADAKH | LADAKH | 194106 | l-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | l-2₹16.4 L+₹1.4 L (9.20%)Rejected-Finance | l-2 | Rejected-Finance Higher side quoted amount | |
| 3 | l-3₹18.6 L+₹3.6 L (23.9%)Rejected-Finance 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | l-3 | Rejected-Finance Higher side quoted amount | |
| 4 | Rejected-Technical HIMALAYA COMPLEX MAIN BAZAR LEH LADAKH 194101 J K | LEH | LEH | JAMMU AND KASHMIR | 194101 | - | Rejected-Technical Due to not enlisted in appropriate category. |
Tender Value
Refer Docs
EMD Value
₹40,000
Closing Date
5 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
CWE Khumbathang
DAY TO DAY PETTY B/R REPAIRS AND REPAIRS TO DOOR, SHUTTERS, WIRE MESH ETC IN VARIOUS TEMP AND PERMT BLDGS AT LAMAYURU, KHALTSI, HANUTHANG, ACHINATHANG, BATALIK AND BIAMAH UNDER AGE B/R-II KHALTSI UNDER GE KHUMBATHANG
2023_MES_585041_1
80051/147/E8
Open Tender
Miscellaneous Works
Item Rate
330 days
khumbathang
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
GE Khumbathang
₹40,000
Yes
1 May 2023
9 Mar 2023
6 Apr 2023
9 Mar 2023
5 Apr 2023
23 Mar 2023
Amount
Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)complete all as specified and directed by Engr-in-Charge.
Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description n.exc 1 sqm each complete all as specified and directed by Engr-in-Charge.
Taking down shutter of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed by Engr-in-Charge.
S&F in repairs of plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints in 2nd Class Softwood complete all as specified and directed by Engr-in-Charge.
M&L for 35mm thick of 2nd class softwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers to chowkats for doors complete all as specified and directed by Engr-in-Charge.
M&L in repair for 35mm thick of 2nd class softwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge, etc. (without sash bars) edges for receving glass etc sizws of members of shutter as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
M&L in repair for 30mm thick of 2nd class softwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. devided in squares in plain, chamfered or rounded. mittered and rebated with sash bars and providing in windows, ventilators and stiles and rails etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed by Engr-in-Charge.
M&L for preparation of wood and wood based material surface of any descriptiony description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.
S&F 100mm long, mild steel butt hinges, medium weight, cold rolled (including fixing with nails/ screw or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F 75mm long, mild steel butt hinges, medium weight, cold rolled (including fixing with nails/ screw or welded as required) complete all as specified and directed by Engr-in-Charge.
S&F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F in repair for 100 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed by Engr-in-Charge.
S&F in repair for 150mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 100mm long Aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for aluminium extruded section door closer hydrau lically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in-Charge.
S&F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge.
S&F in repair for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed by Engr-in-Charge.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.
S&F 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on walls complete all as specified and directed by Engr-in-Charge.
S&F 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work on ceiling complete all as specified and directed Engr-in-Charge.
M&L plain fillets of second class soft wood (KAIL), sectional area n. exc. 6 Sqcm moulding as in cornices, picture rails and the like complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class soft wood (KAIL), sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in bull nosed, splayed, chamfered or rounded complete all as specified and directed by Engr-in-Charge.
Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.
M&L Plain fillets of second class soft wood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
All as per Srl item no. 35.00 above but except sheeting complete all as specified and directed by Engr-in-Charge.
S&F 0.63mm thick, galvanised, plain mild steel sheeting in ridge, hips, valley gutters, drips andd straight flashings (length and girth as fixed)with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.
M&L preparation of old painted steel surfaces and applying one coat of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
M&L preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.
Taking down cement plaster on brick or stone walls, etc. including raking outjoints, hacking for key, scrubbing down with water, etc. complete all as specified and directed by Engr-in-Charge.
Demolition of precast concrete block masonry, built in cement mortar complete all as specified and directed by Engr-in-Charge.
M&L for Precast cement concrete type-C-1 block masonary with solid blocks 1:3:6 (using 20mm graded crushed stone aggregate) exc. 10cm in width and setting in cement mortar (1:6) complete all as specified. and directed by Engr-in-Charge.
M&L for rendering 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for Rendering 15 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for preparation of new plastered surface on walls and applying two coats of cement based paint complete all as specified and directed by Engr-in-Charge.
M&L for two coats of oil bound distemper on wall including preparation of newly plastered wall surface complete all as specified and directed by Engr-in-Charge.
Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge.
M&L 25mm thick cement concrete 1:2:4 type B-2(12.5 mm graded aggregate) as in floor or similar works complete all as specified and directed by Engr-in-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge.
M&L for Joint free Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tiles exc 0.06 and n.exc 0.11 Sqm in floors etc over 15mm screed bed in cement mortar (1:4) set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed by Engr-in-Charge.
M&L for Vitrified ceramic (Light Shade) tiles 10mm thick (square/rectangular) polished, area of each tiles n.exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl screed bed with CM(1:4) 15mm thick for laying floor tiles complete all as specified and directed by Engr-in-charge.
M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles, comp laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engr-in-Charge.
M&L for Glazed coloured ceramic tiles in vertical surface 300x 200x 7mm/ 450X 350X 7mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4)
Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc laid beddeed and pointed in any mortar complete all as specified and directed by Engr-in-Charge.
M&L for 20-25 mm thick machine cut kota stone slab flooring jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab laid over 20 mm thick screed bed of CM 1:4 over neat cement slurry @ 3 Kg/Sqm over sub base including rubbing and polishing complete all as specified and directed by Engr -in Charge.
S & F in repair vitreous china water closet squatting pan ‘Orrissa pattern” size 580x440mm white with integral foot rests including provision of of cement concrete bedding, connection to flush pipe and making good the disturbed portion of floor to match with the existing surface jointing to PVC/CI bend and flush pipe complete all as specified and as directed by Engr-in-Charge.
S&F in repair vitreous china wash down pedestal pattern EWC, white water closet pan with integral trap including seat cover, making necessary connections to drain and to flushing pipe antisyphonage pipe etc. jointing to PVC/CI and flush pipe including making good to floor complete all as specified and directed by Engr-in-Charge.
Supply and fix in repairs vitreous china wash hand basin (flat black) white of size 550x400mm excluding taps, waste chain and plug and porcelain stopper including a pair of mild steel angle iron brackets of suitable size complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china urinals, half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 , securing urinal to plugs with and including 60 mm long brass screw, pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipecomplete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous china urinals bowl ,flat back of size 465 x 355 x 265 mm with grating and union for discharge pipe, complete including providing and fixing plugs , bedding urinal against wall in cement mortar 1:2 , securing urinal to pluigs with and including 60 mm long brass screw , pointing around urinal back in cement incl provn of flush pipe, grating and union for discharge pipe complete all as specified and directed by Engr-in-Charge
S&F in repair sinks with drainage board made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe , overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160mmcomplete all as specified and directed by Engr-in-Charge.
S&F in repair sinks made of stainless steel 1 mm thick for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarft wall or including fixing cantilever brackets and connecting union to pipe, overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160mm complete all as specified and directed by Engr-in-Charge.
S&F in repair plastic water closet seat cover, black, closed pattern with flat bottom, and cover with mild steel chromium plated or aluminium hinging device complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC flushing cistern valveless syphonic action type flushing cistern low level 10 Ltrs white with inlet ball valve float and handle incl bracket, and connections to pipes and fixing of chain and pull, or lever, if anycomplete all as specified and directed by Engr-in-Charge.
S&F in repair for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge.
S&F in repair Towel rail 600 mm long D type brass chromium plated with and including chromium plated brass screws and wooden/ plastic cleats etc complete all as specified and directed by Engr-in-Charge.
S&F in replacement of 500 ltrs capacity Rotational moulded polythene water storage tanks (cylindrical vertical with closed top, two layers) with plastic lid cover, triple layer, hoisted and fixed in position as specified in SSR Part-I including dismantalling of old tank complete all as specified and directed by Engr-in-charge.
All as per item No 68.00 here-in-before but capacity of 1000 ltrs complete all as specified and directed by Engr-in-charge
S&F in repair HDPE water storage tank of capacity 500 ltr , cylindrical verticle type 3 layer, insulated with 75mm thick PUF insulation of dencity 48 kg/cum covered with lid having locking arrengment including flot valve high pressure PTMT with epoxy coated aluminium rod & high dencity plastic ball secured for iron pipe and fixed of 15mm bore complete all as specified and dirtected by Engr-in-Charge .
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 15 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm pipe complete all as specified and directed by Engr-in-Charge
S&F 15mm dia 3-layer PP-R ( Polylene random copolymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc., complete all as specified and directed by Engr-in-Charge.
Taking up or down existing GI tubing and connections, including cleaning for refixing and making good the disturbed surface for 20 mm dia pipes complete all as specified and directed by Engr-in-Charge.
S&F galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 20 mm pipe complete all as specified and directed by Engr-in-Charge
S&F in repair for 15 mm bore stop valves, fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repairs for 15 mm bore bib taps, fancy type, chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair for 15 mm bore pillar taps, fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm bore brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.
Credit Note:- The accepted amount will arrived after deducting the sch of credit i.e. 42,430.00
M/S LIBE & CO
KASHMIR FAIR DEAL SERVICES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .