REPAIRS TO CHEQUERED TILE, PAVER BLOCK, HARD STANDING AND MISC B/R WORKS AT RESTRICTED/ UNRESTRICTED AREA OF AGE B/R II AREA

Amount

Demolition for brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, facings, dressed stonework and precast concrete articles and removal or rubbish off the site complete all as specified and directed.

M&L for brickwork with old size subclass 'B' bricks, except bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed

M&L for brickwork with modular flyash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:4) complete all as specified and directed

M&L for extra for forming fair finish drain channel 45 cm inner grith in cement concrete using extra cement complete all as specified and directed

Demolition of concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) and removal of rubbish off the site complete all as specified and directed

M&L for cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) in surface channels and drains for benching complete all as specified and directed

Demolition of reinforced cement concrete of any description including facilitate to cut the reinforcemment and removal of rubbish off the site complete all as specified and directed

M&L for RCC 1:2:4 type B1 using but in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar art swet in CM 1:6 complete all as specified and directed

M&L for providing reinforcement cement concrete 1:2:4 (Nominal mix) (20 mm graded stone aggregate) as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and directed.

M & L for TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for Providing precast cement concrete 1:2:4 (12.5 mm graded stone aggregate) louvres and jallies, 25mm thick (measured solid), including all mould- ings but excluding frame complete all as specified and directed.

M & L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work, vertical or to batter complete all as specified and directed.

M&L for cement concrete type B-0 1:2:4 (using 12.5mm graded stone aggregate) in cills, steps, plinth courses, string courses, lacing courses, parapets, copings, kneelers, apex stones, bed plates, kerbs water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed rounded or chamfered on edges complete all as specified and directed

Dismantling post (Wood/Steel or RCC) any section including taking out embedded portion and making good disturbed portion complete all as specified and directed

Excavation in post holes (or similar holes) each n.exc 0.5 cum getting out, returning filling in and ramming earth and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed.

M&L for PCC as in fdn filling and mass concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed

S&F mild steel angle and flat and round bars iron section fixed independently with out connecting plate of Fe-290 (Gde-E-165) complete all as specified and directed

S&F framed work such as grills, gratings,etc,with ends of bars shouldered and /or riveted, or forged into spickes; framed guard bars; barried iron door;ladders;framed balustars; walk ways; railings; framed workof water tans and similar work conforming to Fe 290 Gde-E--165 complete all as specified and directed

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4 )and finish smooth & even with using extra cement complete all as specified and directed

M&L for preparation of new plastered surface of wall applying of two coats of cement based paint over a coat of chalk whitening primer complete all as specified and directed

M&L for two coats of synthetic enamel paint on new surface over one coat of red oxide primer including preparation of surface of any description, over 10 cm in width or girth not other wise described all as specified and directed by Engr-in-Charge.

Dismantling fencing wire mesh any type complete all as apecified and directed by Engineer- in -Charge

Supply and fix galvanised iron wire using Hot Dip technology chain electrgalvanised coating chain link fencing wire mesh of size 75 x 75 mm minimum dia of wire 3 mm confirming to IS- 2712-2003 having tensile strength 400 to 500 mpa. The mesh wire and line wire of the fabric shall be macnufactured from ISI marked (Make: Tata Wireson) galvanised steel confirming to IS 280: 2006 (4TH Revision). The kumcled ends should be long lasting and resistance to corrosion and testing criteria fullfill the requirement as per IS 1161:1998 complete all as specified and directed

S&F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured) complete all as specified and directed

Restraining resecuring including making good staples etc, galvanised 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc as directed (each line wire to be measured ) complete all as specified and directed

S&F mild steel screw bolts (machine made)with hexagonal or square heads at one end and screw other .and each screw end to be fixed with washers and nut exc 5 cm but n.exc 10 cm long of dia 11 to 15mm complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L one coat of aluminium paint complete all as specified and directed.

M&L for 75 mm thick cement concrete Type D2, 1:4:8 (using 40 mm graded stone aggregate) as in sub bases complete all as specified and directed

M&L for 50 mm thick cement concrete Type B1 1:2:4 (using 20 mm graded stone aggregate) as in floor for receiving floor finish complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size with mixture of grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

Fixing only for machine pressed precast concrete interlocking paver block any shape and size with mixture of grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified and directed

M&L for Chequered cement concrete tiles 30X30X25mm thick, set, jointed and pointed in neat cement slurry in floors complete all as specified and directed over screed bed or bedding layer of 15mm thick in CM 1:6 complete all as specified and directed

M&L out door Vitrified parking tile of size 300x300 mmx10-12 mm thick /400x400 cmx 10-12 mm thick including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and directed.

M/S Ali Trading Co (BID ID -3270490)

M/S TILKU ENTERPRISE (BID ID -3269591)

M/s Raj Kumar Chopra (BID ID -3270957)

Goswami Enterprise (BID ID -3269597)

SANJAY KUMAR SUPAN (BID ID -3269580)

UNITED BUILDERS (BID ID -3269565)

NATIONAL CONSTRUCTION CO (BID ID -3270759)