construction of Pre-Fabricated Passanger Shed at Sanasar

Amount

1) Construction & Erecting of Pre-fabricated Passenger shed of 160.00 sq.ft. plinth area all works to conform the relevant IS codes including investigating,designing, providing, fixing, hoisting and installing of all required building components complete finished job as per following specifications & mile stones :- a) Foundations and plinth: For steel columns the footings of the Foundations shall be constructed in cement concrete of 1:1.5:3 grade mix with required anchoring nuts bolts and plates, where as the dwarf walls shall be of cement concrete of 1:3:6 mix grade , strictly as per drawings incl. excavation in earth work, as directed by EIC

. b) Superstructure: The steel structure for the passenger shed will be designed for for designed parameters. All structural steel will be ISI marked with manufacturer's test certificates for raw materials and structural properties. The main columns, verandah beams, rafters ,trussses, purlines, plates bolts/nuts etc. The size of steel sections/thickness of M.S plates, size of bolts and nuts will be as per drawings/relevant specifications as directed by EIC at site. c) Roofing: The roof will be provided with 0.63mm thick green/red colour coated steel profile sheets over trussses purlines, rafters, beams,joists of designed sections. Sheet covering will be fixed with using hot dip zinc coated self drilling hexagonal washers head fasteners/or spacial T or L hooks to resist high wind storms. Ridges in case of such design shall be provided/covered by 0.63 mm thick colour coated steel sheet. The sheets shall be laid with minimum end and side lap of 150mm,

d) Roof projections: The roof will have minimum 600mm projection alaround including front side. Purlines will also be extended in the roof at the eaves and at the gable roof extension( outside the structure). e) Main walls & partitions walls: The main walls or partitions walls will be made up of 60mm thick wall panels of make Lloyed panel System/Jindal _Sintex.The panels will be made of 0 .63mm thick hot dipped galvanized steel sheets on both sides with 60mm thick layer of rigid CFC free close cell polyurethane foam (Density 40kg+2kg/cum) insulation. The walls panels will be provided with tongue and groove joint & will be cam lock System for interlocking. All materials required for the manufacture of shed will be new and shall comply with relevant Bureau of Indian Standard Specifications. Base channels of specified size will be provided for walls. The fire retarding and self extinguishing properties as per international Standard B2 DIN 4102 part-1/BS-4735 Self Ext.

f) False ceiling: Ceiling shall be provided and fixed of GIP board ceiling with square pipes with 24mm grid section for ceiling of size 595×595×15mm. g) Flooring: Vitrified tiles Flooring of approved make ( Kajaria/Nitco/Somany or equivalent) as per PWD SSR conforming to IS. 15622 over cement concrete base mate shall be provided carefully incl. P.C.C plinth protection. h) Electrification: The passenger shed ordinarily electrified with Two no. Lighting points with Two no. wall sockets for mobile charging as per specifications referred in CPWD DSR E&M 2016, complete job with all required materials including installation, testing & commissioning.

i) Seating Facility: M.S benches with rectangular back seat with heavy duty materials with wooden colour finishing paint in seat and back fixed in cement concrete 1:2:4 mix grade shall be provided for a minimum capacity of Ten (10) seats. All the above milestones of activities shall be carried out with relevant codes, designs and clauses. The quality & time shall be the essence of contract and lack of knowledge or vested intentions shall not bo accepted . Payment shall be made only after satisfactory completion of work with one year D.L.P.. Total Qty i.e. Plinth Area =16.0×10.0=160.0Sft

maa durga GIFT

M/S BASHARAT ALI

JAVED IQBAL