Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-Finance | L1 | Accepted-Finance Lowest and reasonable | |
| 2 | L2₹44.8 L+₹2.9 L (6.86%)Rejected-Finance DHARAM SALA SINGHAN CHADOORA DISTT BUDGAM J K | CHADOORA | BUDGAM | JAMMU AND KASHMIR | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹50.1 L+₹8.3 L (19.8%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹51.1 L+₹9.2 L (22.0%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹53.1 L+₹11.2 L (26.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
20 Jun 2023, 6:00 pmClosed
GE AF SRINAGAR
GE AF SRINAGAR AF STN SRINAGAR 190007
REPAIR/ REPLACEMENT OF UNDERGROUND GI / CI / DI PIPE LINES, CENTRIFUGAL PUMP SETS, LEGGINGS, VARIOUS EQUIPMENTS INSTALLED AT WATER SUPPLY INSTALLATION AND OTHER MISC WORKS, AT AF STATION UNDER GE (AF) SRINAGAR
2023_MES_597226_1
GE(AF)SGR- 17 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
GE AF SRINAGAR
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE AF Srinagar
₹90,000
Yes
4 Aug 2023
22 May 2023
21 Jun 2023
22 May 2023
20 Jun 2023
8 Jun 2023
Amount
Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for laying CI/DI/GI of pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.
Removing excavated material (soil) to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.
Note for Item 1 to 3:- Excavation & earthwork required for taking down / laying / re-laying of GI / CI / DI pipe shall be measured under thease items.
Disconnecting and taking up or down old unserviceable 100 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 80 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 50 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 40 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 25 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 20 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Disconnecting and taking up or down old unserviceable 15 mm bore GI / MS tubing from trenches / wall incl fittings etc complete all as specified and directed.
Supply laying, jointing and testing 100 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 80 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 50 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 40 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 25 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 20 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Supply laying, jointing and testing 15 mm bore Mild steel galvanised water tubing, medium grade, with and including all GI fittings, laid in trenches complete all as specified and directed.
Re-fixing of 100 bore old steel water tubing as retrieved from item No 4 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 80 bore old steel water tubing as retrieved from item No 5 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 50 bore old steel water tubing as retrieved from item No 6 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 40 bore old steel water tubing as retrieved from item No 7 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 25 bore old steel water tubing as retrieved from item No 8 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 20 bore old steel water tubing as retrieved from item No 9 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Re-fixing of 15 bore old steel water tubing as retrieved from item No 10 here-in-before and connection in new or old position, laid in trenches, including cleaning / removing blockage and including all new fittings and fixtures complete all as specified and directed.
Note for Item 11 to 24:- Quoted rates shall be deem to include for all fittings & fixture required for laying / fixing of GI pipe
Taking up CI / DI water mains of 150 mm diameter (including all fittings), with Spigot and Socket ends and lead joints including burning out joints, all as specified and directed.
Taking up CI / DI water mains of 100 mm diameter (including all fittings), with Spigot and Socket ends and lead joints including burning out joints, all as specified and directed.
Relaying cast iron CI pipes of 150 mm bore diameter with Spigot and Socket ends after cleaning internal surface of serviceable pipes by using of wire brush and cleaning thoroughly with fresh water and taking out mud / soft deposited inside the pipes ( CI pipe obtained from Ser item No. 25.00 shall be reused) complete all as directed .
Relaying cast iron CI pipes of 100 mm bore diameter with Spigot and Socket ends after cleaning internal surface of serviceable pipes by using of wire brush and cleaning thoroughly with fresh water and taking out mud / soft deposited inside the pipes ( CI pipe obtained from Ser item No. 26.00 shall be reused) complete all as directed .
Supply and laying for CI pipes of 150 mm bore diameter with Spigot and Socket ends centrifugally cast, Class LA, in any length laid in trenches all as specified and directed by Engr-In-Charge
Supply and laying for CI pipes of 100 mm bore diameter with Spigot and Socket ends centrifugally cast, Class LA, in any length laid in trenches all as specified and directed by Engr-In-Charge
M&L for Run lead joints for 150 mm bore spigot & socketed type cast iron Pipes and caulking the joints properly for the following sizes, complete all as specified and directed by Engineer-in-Charge
M&L for Run lead joints for 100 mm bore spigot & socketed type cast iron Pipes and caulking the joints properly for the following sizes, complete all as specified and directed by Engineer-in-Charge
Material and labour for C I bends, Tees, collar, Tail piece etc (any type & shape and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for CI pipe upto 150 mm dia.
Supply and lay in trenches 150 mm bore ductile iron pipes, socket and Spigot ends, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K-7 rating, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329 / 2000 including provision of EPDM rubber joints conforming IS: 5382 of 1985 complete all as specified and as directed by Engr-in-charge.
Supply and lay in trenches 100 mm bore ductile iron pipes, socket and Spigot ends, ISI marked Centrifugally Cast (Spun) Ductile Iron Pressure pipes conforming to IS:8329/2000 classification K-7 rating, suitable for push-on-joint (Rubber gasket-D jointing) with cement mortor lining inside the pipes and outside zinc coating with Bituminous finish coat as per IS:8329 / 2000 including provision of EPDM rubber joints conforming IS: 5382 of 1985 complete all as specified and as directed by Engr-in-charge.
Material and labour for D I bends, Tees, collar, Tail piece etc (any type & shape and angle) tapers any type (straight, bend, increasing, decreasing or double socket etc) Tee pieces single branch, 'Y' junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs suitable for DI pipe upto 150 mm dia.
M&L for repairing old run lead joint by burning & removing old run lead from 150 mm bore spigot & socketed Cast iron pipe, in any position, filling the same joint by reusing 50% old run lead and balance new run lead, caulking the joints properly to arrest leakage etc, including necessary earth work, excavation as required, complete all as specified and directed by Engineer-in-Charge
M&L for repairing old run lead joint by burning & removing old run lead from 100 mm bore spigot & socketed Cast iron pipe, in any position, filling the same joint by reusing 50% old run lead and balance new run lead, caulking the joints properly to arrest leakage etc, including necessary earth work, excavation as required, complete all as specified and directed by Engineer-in-Charge
M&L for repairing old lead wool joint by removing old lead wool from 150mm bore spigot & socketed Cast iron pipe, in any position, filling the same joint by reusing 50% old lead wool and balance new lead wool, caulking the joints properly to arrest leakage etc, including necessary earth work, excavation as required, complete all as specified and directed by Engineer-in-Charge
M&L for repairing old lead wool joint by removing old lead wool from 100 mm bore spigot & socketed Cast iron pipe, in any position, filling the same joint by reusing 50% old lead wool and balance new lead wool, caulking the joints properly to arrest leakage etc, including necessary earth work, excavation as required, complete all as specified and directed by Engineer-in-Charge
Supply and fix 200 mm size sluice valve, long body type of pressure rating PN-1.6 with stainless steel spindle, both end flanged, ISI marked complete with cast iron wheel, nut, bolt, washer, rubber packing etc., confirming to IS-14846-2000 including taking down old valve complete.
Supply and fix 150 mm size sluice valve, long body type of pressure rating PN-1.6 with stainless steel spindle, both end flanged, ISI marked complete with cast iron wheel, nut, bolt, washer, rubber packing etc., confirming to IS-14846-2000 including taking down old valve complete.
Supply and fix 100 mm size sluice valve, long body type of pressure rating PN-1.6 with stainless steel spindle, both end flanged, ISI marked complete with cast iron wheel, nut, bolt, washer, rubber packing etc., confirming to IS-14846-2000 including taking down old valve complete.
Supply and Fix cast iron 150 mm size butter fly valve, with both end flanged type, conforming to IS 13095 with nuts bolts and washers of suitable size and necessary rubber gaskets etc complete all as specified and directed by Engr-in-Charge, including taking down old valve complete.
Supply and Fix cast iron 80 mm size butter fly valve, with both end flanged type, conforming to IS 13095 with nuts bolts and washers of suitable size and necessary rubber gaskets etc complete all as specified and directed by Engr-in-Charge, including taking down old valve complete.
Supply and fix 150 mm size cast iron Non return valve heavy duty ISI marked including flanged joints with packing materials, nuts, bolts, etc including taking down old valve complete.
Supply and fix 100 mm size cast iron Non return valve heavy duty ISI marked including flanged joints with packing materials, nuts, bolts, etc including taking down old valve complete.
S&F GI tubes 20 mm bore 'medimum grade' with all fittings including clamps and fixed complete to walls and ceilings or cutting chases in wall and making good to disturbed portion of wall complete all as specified and directed by Engineer-in-Charge.
M & L for Lagging to pipes 15mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
M & L for Lagging to pipes 20mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
M & L for Lagging to pipes 25mm bore used in external water supply or plumbing all around with 50mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25gauge 20mm mesh complete including taking down of old lagging if required all as specified and directed by Engineer-in-Charge
Taking down 15 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing .
Taking down 20 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing .
Taking down 25 mm bore galvanised iron water tubing medium grade and refixing the same after cleaning / removing the blockage including the provision of new fittings and fixtures complete all as specified and directed. Note :- All required T&P will be arranged by contractor for removing / refixing the GI tubing .
S&F 50 mm size Gun metal globe or gate valve, yoke type, full opening with iron wheel head, screwed both ends, heavy duty, ISI marked including taking down old valve complete all as specified and directed by Engr-in-charge.
S&F 40 mm size Gun metal globe or gate valve, yoke type, full opening with iron wheel head, screwed both ends, heavy duty, ISI marked including taking down old valve complete all as specified and directed by Engr-in-charge.
S&F 25 mm size Gun metal globe or gate valve, yoke type, full opening with iron wheel head, screwed both ends, heavy duty, ISI marked including taking down old valve complete all as specified and directed by Engr-in-charge.
S&F 20 mm size Gun metal globe or gate valve, yoke type, full opening with iron wheel head, screwed both ends, heavy duty, ISI marked including taking down old valve complete all as specified and directed by Engr-in-charge.
S&F 15 mm size Gun metal globe or gate valve, yoke type, full opening with iron wheel head, screwed both ends, heavy duty, ISI marked including taking down old valve complete all as specified and directed by Engr-in-charge.
Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete
M&L for servicing of pump sets of capacity 75 HP by repair to shaft with metaling & polishing , oiling, greasing, grinding, machining, finishing and aligning to reqd size and replacing of UNSV nuts, bolts and washers of exisitng / approved make and type including refixing / commissioning at site complete all as directed.
M&L for servicing of pump sets of capacity 50 HP by repair to shaft with metaling & polishing , oiling, greasing, grinding, machining, finishing and aligning to reqd size and replacing of UNSV nuts, bolts and washers of exisitng / approved make and type including refixing / commissioning at site complete all as directed.
M&L for servicing of pump sets of capacity 22.5 HP by repair to shaft with metaling & polishing , oiling, greasing, grinding, machining, finishing and aligning to reqd size and replacing of UNSV nuts, bolts and washers of exisitng / approved make and type including refixing / commissioning at site complete all as directed.
M&L for servicing of pump sets of capacity 15 HP by repair to shaft with metaling & polishing , oiling, greasing, grinding, machining, finishing and aligning to reqd size and replacing of UNSV nuts, bolts and washers of exisitng / approved make and type including refixing / commissioning at site complete all as directed.
M&L for servicing of pump sets of capacity 7.5 HP by repair to shaft with metaling & polishing , oiling, greasing, grinding, machining, finishing and aligning to reqd size and replacing of UNSV nuts, bolts and washers of exisitng / approved make and type including refixing / commissioning at site complete all as directed.
Laboure only for Strip / side opening of 15000 GPH capacity split type / multi stage centrifugal pump for replacement of defective components and reassembling and testing after repair complete all as specified and directed by Engineer-in-Charge Note:- Spare Parts shall be measured and paid separately
Supply only following Spare Parts for 15000 GPH capcity centrifugal pump set of complete all as specified and directed by Engineer-in-Charge incorporate under respective all as per existing approved make & Type:-
Bush bearing No 6307
Cast iron impeller for 15000 GPH cap Pump as per sample
Stainless steel main shaft suitable for 15000 GPH pump set complete with groove and key arrangement
Gun metal rings / bush for impeller of centrifugal pump Model DSM-80 / 36 (Drive / Driven side)
Gun metal inter stage rings of centrifugal pump Model DSM-80 / 36 (Drive/Driven side)
Bearing houing (DE/NDE)
CI split Gland
Labour only for Strip / side opening of 20000 GPH capacity split type / multi stage centrifugal pump for replacement of defective components and reassembling and testing after repair complete all as specified and directed by Engineer-in-Charge Note:- Spare Parts shall be measured and paid separately
Supply only following Spare Parts for 20000 GPH capcity centrifugal pump set of any make complete all as specified and directed by Engineer-in-Charge
Gun metal ring / bushes for impeller
Bronze impeller for 20000 GPH cap pump as per sample
Stainless steel main shaft suitable for 20000 GPH pump set complete with groove and key arrangement
CI split Gland with nuts, bolts and washers
Gun metal inter stage rings of centrifugal pump 20000GPH (Drive/Driven side)
Bearing houing (DE/NDE)
CI split Gland
Supply and Fix in repair Fully automatic star delta starter for 75 HP / 56 KW motor pump, with sheet metal enclosure with contactor, overload relay range 55 to 70 amp complete with prewired accessories complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repair Fully automatic star delta starter for 50 HP / 44.8 KW motor pump, with sheet metal enclosure with contactor, overload relay range 48 to 65 amp complete with prewired accessories complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repair Fully automatic star delta starter for 25 HP / 44.8 KW motor pump, with sheet metal enclosure with contactor, overload relay range 20 to 30 amp complete with prewired accessories complete all as specified and directed by Engineer-in-Charge.
Supply and Fix in repair direct online starter for 7.5 HP motor pump, with sheet metal enclosure complete all as specified and directed by Engineer-in-Charge.
M&L for Disconnecting electric motor from pump side & from foundation taking down carefully AC electric motors, 3 phase, 415 volts of any make of following capacity, from site, and removing the old burnt winding, cleaning surface area, rewinding of stator assembling with super enameled copper winding wire of superior quality of existing SWG and No of turns including insulating materials such as fiber glass, insulation, PVC and cotton tape etc as per manufacturer’s norms, reassembling of the motor after repair, installing and testing complete all as specified and directed by Engineer-in-Charge
Electric motor of 75 HP pump
Electric motor of 50 HP pump
Electric motor of 22.5 HP pump
Electric motor of 7.5 HP pump
Electric motor of 5 HP pump
Electric motor of 1 HP pump
Material and Labour for one coat of Synthetic enamel painting to 25 to 75 HP pump sets with by spray including preparation of old painted surfaces complete all as specified and directed by Engineer-in-Charge
S&F Cooling fan suitable for 75 HP motor
S&F Cooling fan suitable for 50 HP motor
S&F Cooling fan suitable for 22.5 HP motor
S&F Cooling fan suitable for 15 HP motor
S&F Cooling fan suitable for 7.5 HP motor
Supply and Fix in repair Steel coupling set of following sizes, jaw flex coupling suitable for non clog pump set including removing old u/s coupling complete all as specified and directed by Engineer-in-Charge. Make: Love Joy Type in Unik / Everest/ Unitech
Steel coupling of size TC-014
Steel coupling of size TC-015
Steel coupling of size TC-016
Supply and fix 80 mm size cast iron foot valve with one side flanged end including rubber insertion sheet, nut bolt washer including taking down complete
Supply and Fix in repair steel ball bearing of following sizes in electric motor complete all as specified and directed by Engineer-in-Charge
Bearing No 6215 C3 ZZ
Bearing No 6310 C3 ZZ
Bearing No 6315 C3 ZZ
Supply and Fix in water Pressure Gauge 100 mm dia 0-30 Kg / Sqcm complete all as specified and directed by Engineer-in-Charge
Supply and fix in repair star coupling of following size all as specified and directed by Engineer-in-Charge
M/s Jaipal Associates
M/S TARIQ AHMAD SHEIKH
M/S NEW FAROOQ TRADERS
M/S HARJEET ENTERPRISES
M/S KHAN ENTERPRISES
M/S WANI AND SONS
M/S FAROOQ AND SONS
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .