Erection and installation of 6.6 kv O/H Line from 33 KV/6.6KV substation 1E at Ara to /.) Proposed one number 250 KVA 6.6 kv/440 V Distribution Transformer to be installed near kundi WB-7(Route length approx. 500 metre) and .(A) Proposed one number 5

Supply of 13 metre Steel Tubular pole

Supply of 16 metre Steel tubular pole

Erection of steel tubolar or rail pole strut in cement concrete 1:3.6 (1 cement: 3 coarse sand 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling and secured with holding clamps, bolts,nuts, etc.as required for 13 metre steel tubular pole.

Erection of metallic pole of length upto 16 mtr in cement concrete 1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required.

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole crass arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for 11KV/22KV/33 KV over head lines as required.

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) pole top bracket/cross arm for single 11 KV over head line conductor complete with 50 mm X 6mm flat iron clamp, bolts, nuts and washers including drilling holes for insulator pins, bolts and nuts etc and painting with primer and finish paint as required

Erection of pole top cross arm on steel tubular/ rail/PCC pole for 11 KV

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) V shape cross arm for two 11 KV over head line conductors complete with 50 mm X 6 mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required

Erection of pole V shape two wire, angle iton/ channel iron, cross arm on steel tubular/rail/ PCC pole for 11KV