MISC REPAIR WORKS OF WATER PROOFING TREATMENT AND ROOF SHEETS RELATED TO PREMONSOON MAINT WORKS IN AREA OF AGE BR I UNDER GE SAUGOR

Amount

Dismantling unframed timber scantlings 40 sq. cm & over in section, in any position complete all as specified and directed

Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section framed/unframed complete all as specified and directed.

S&F 6mm thick asbestos cement, corrugated or semi-corrugated shets in roofs Fixed with L-type or J-type or cranked hook bolts including dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed

All as per Srl item No.3 as above but except sheets Note:-Serviceable AC sheets obtained from dismantling shall be re-used in this item

S&F 6mm thick asbestos cement serrated ridge or hip ridge for corugated or semi corugated sheets, fixed with L-type or J-type or cranked hook bolts with GI & bituminous washer including dismantling AC sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed

S&F 0.50 mm thick galvalume sheet profile pattern precoated coloured having tensile strength 550 Mpa as in roof covering, fixed with self driving screws including dismantling existing GI sheet of any type and any thickness in roof coverings complete all as specified and directed Make: JSW or TATA,blue scope building product or equivalent as approved by GE

S&F 0.50 mm thick galvalume sheet precoated coloured Profile ridge ,fixed with self driving screws including dismantling GI sheet ridge/hip for corrugated or semi corrugated sheets from roof complete all as specified and directed Make JSW or TATA,blue scope building product or equivalent as approved by GE

M&L for second class hardwood in scantlings , timber clean sawn framed and fixed complete as specified and directed

M&L for preparing surfaces of wood & wood based materials, new or old, of any description & girth, not otherwise described & treated with one coat of cresote complete all as specified and directed

S&F mild steel rolled section as in roof trusses (framed), trussed, purlins, rails , post and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc including bending and welding angles, as necessary, gusset plates, riveting, bolting etc complete all as specified and directed

S&F mild steel for wind ties for roof including securing bolts, posts including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165 complete all as specified and directed

S&F mild steel hollow tube section as in post, main & cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecction plates including drilling hole for bolting ,connecting to gusset plate complete all as specified and directed

S&F mild steel plates (plain or chequered) channels square cut to or notched forming holes with riveted bolted or welded attachment for Fe-410W complete all as specified and directed.

S&F GI ( cold rolled) snap grid size of 600mm x 600 mm frame work of 24mm x 38mm x 0.60mm, Tee Section ( bottom pre coated ) and 24mm x 24mm x 0.5mm thick angle rung along the wall incl GI suspenders wire as per manufacturer instruction as in ceiling with and including S&F coloured Non Asbestos designer ceiling cement boards 4 mm thick including dismantling of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness, frames complete all as specified and directed.

M&L for Armstrong mineral fibre acoustical suspended ceiling system with dune supreme (Beveled Telgular) Edge tiles with armstrong silhouette black reveal 15mm exposed grid ,tiles should have humidity resistance (RH) of 99%,NRC 0.5 ,Light reflectance >83% ,Thermal conductivity K=0.052-0.057 w/m K ,colour white, fire performance UK class 0/class 1 (BS 476 pt-6&7) in module size of 600x600x15mm with bio block coating on the face of the tile ,suitable for green building application ,with recycled content of 38-41% .The tile shall be Armstrong silhouette black reveal profile grid system with 15mm white flanges incorporating a 6 mm central reveal in white /black and with a web height of 38mm and a load carrying capacity of minimum 15.68kgs/M2 .Silhouette ,main runners &cross tees to have mitred ends & birdsmouth notches to provide mitred cruciform junctions including dismantling of existing ceiling boards (fiber, pulp, insulation, etc.) or insulation board/slabs/blankets, any thickness, frames complete all as specified and directed.The T section have a Galvanizing of 90 grams per metre square Installation :To compose main runner spaced at 1200 mm centre securely fixed to the structual soffit using suspension system at 1200mm maximum centre .The first /Last suspension system at the end of each main runner should not be graeter than 450 mm from th adjacent wall .Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200x600mm module ,cut cross tees longer than 600mm required independent support 600x600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor complete all as specified and directed

Dismantling of floor, hearth or wall tiles / terrazo including cement mortar bedding (but not backing), and rubbish off the premises complete all as specified and directed.

M&L for brickwork with subclass 'B' bricks old size, straright or corved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brick work or rubbled stone masonry including all qoins arches , pillars etc built in cement mortar complete all as specified and directed

M&L for 600mm x 600mm x 8mm to10mm thick coloured vitrified tilesas in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&LK for 600mm x 600mm x 8mm to 10 mm thick coloured vitrified tiles as in skirting or dado set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured vitrified tiles area of each tile exc 0.42 Sqm but not exc 1.00 Sqm as in floors set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for coloured vitrified tiles area of each tile exc 0.42 Sqm but not exc 1.00 Sqm as in skirting or dado set & jointed in neat cement slurry and pointed in white /coloured cement to match the colour of tiles laid over and including 10mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent make as approved by GE ) 10mm thick as in floors laid over and including 15mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with white cement and pigment i complete all as specified and directed

M&L for coloured designer tiles exterior grade ( ENDURA or equivalent ) 10mm thick as in skirting laid over and including 10mm thick cement mortor 1:4 set and jointed and pointed in neat cement slurry with white cement and pigment complete all as specified and directed

M&L for 25mm thick PCC (1:2:4), type B1 (using 20 mm graded stone aggregates) as in sub base of floor to receive tiles or kota stone complete all as specified and directed

M&L for 40mm thick PCC (1:2:4), type B-1 (using 20mm graded stone aggregates) surfcae finished even & smooth using extra cement complete all as specified and directed

S&F glass dividing strips, 3mm thick & inserted in position to conform to design width of strip 38 mm complete all as specified and directed

M&L for raking out joints/ pointing in cement mortar to squared rubble masonry, coursed or uncoursed complete all as specified and directed

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:4 on brick wall / concrete surfaces of finishing the surfaces even and fair complete all as specified and directed.

M&L for rendering 20 mm thick on stone masonry surface or surface other than fair face of brick work in CM(1:4) finished even and smooth without using extra cement complete all as specified and directed

M&L for rendering 15mm thick cement plaster on wall in cement mortar 1:6 on brick wall / concrete surfaces of finishing the surfaces even and fair complete all as specified and directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) finishing the surface even and smooth as in ceiling complete all as specified and directed

M&L for cement concrete 1:2:4, type B-1 ( using 20 mm graded stone aggregate ) as in coping, bed plate, kerbs including weathering , slightly rounded or chamferred angles and throating and including necessary form work complete all as specified and directed

M&L for taking down cement plaster and rendering 15mm thick in cement 1:6 for work in isolated widths or widths not forming part of general plastering such as band, Jams,cornices ,skirting,drip mould, and similar work exc. 15 cm but n. exc. 30 cm in width or girth , including cutting to edges all mitres and stop ends etc including finish the surface with existing finish complete all as specified and directed.

M&L for applying two coats of elastomeric-acrylic waterproof protective cum decorative coating on external surface of RCC, concrete panels, plastered surface of wall etc., over a coat of primer including preparation of surfaces all as per manufactures instructions complete all as specified and directed. Make: Dr Fixit (Raincoat) or equivalent make as approved by GE

M&L for applying evenly a coat of blown type bitumen 85/25 at the rate of 1.50 kg per square metre over a coat of bitumen primer @ 0.30 to 0.50 kg per Sqm and blinding with clean dry sand @ 0.05 Cum. per sqm over roof surfaces including preparation of old surface complete all as specified and directed.

M&L for preparing the new plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.

M&L for three coats of white wash on new ceiling including preparation of surface complete all as specified and directed

M&L for two coats of distemper acrylic emulsion, white or tinted on new wall surface including preparation of surface complete all as specified and directed

M&L for Birla / J. K. wall care white putty 2mm thick for levelling the surfaces on wall surface including preparation of surface complete all as specified and directed.

M&L for two coats exterior weather coat over one coat of exterior primer including preparation of surfaces of new walls complete all as specified and directed. Make:- Asian Apex or equivalent make as approved by GE

M&L for one coats of distemper acrylic emulsion, white or tinted on old wall surface including preparation of surface complete all as specified and directed

M&L for applying one coats exterior weather coat including preparation of surfaces of old walls complete all as specified and directed Make:- Asian Apex or equivalent make as approved by GE

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

S&F in repairs 110mm dia PVC(SWR) pipes single soketed in any length with jointed with solvent fixed to wall including ms clamps complete all as specified and directed.

S&F in repairs PVC (SWR) bends 110 mm dia complete all as specified and directed.

S&F in repairs PVC (SWR) pipes 75mm bore single socketed, in any length jointed with solvent joints laid in trenches or in floors complete all as specified and directed

S&F in repairs PVC (SWR) bends 75mm dia complete all as specified and directed.

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15mm dia GI tubing and connections complete all as specified and directed

Taking down and refixing old 15mm GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed

Taking down and refixing old 20mm GI tubing and connection in new or old position ( wall, floor, wall etc ) complete all as specified and directed

S&F in repairs PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed

S&F rotational moulded polyethylene three layered water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed 500 Ltrs Capacity including dismantling exisitng water tanks of capacity not exceeding 500 Ltrs complete all as specified and directed

S&F rotational moulded polyethylene three layered water storage tanks (cylindrical vertical with closed top) three layered wall construction hoisted & fixed 1000 Ltrs Capacity including dismantling exisitng water tanks of capacity exceeding 500 Ltrs but not exceeding 1000 Ltrs complete all as specified and directed

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and removing the dismantled material (debries completly) from site to a distance exc. 1.5 km and depositing, from the roof complete all as specified and directed

Taking down and refixing PVC water storage tank of any capacity including GI pipe/filttings complete all as specified and directed

M&L for PCC 1:2:4, type B-1 (using 20mm graded stone aggregates) as in padding on roof surfaces for correcting /making proper slope on roof,surface finished fair and even without using extra cement complete all as specified and directed.

M&L rendering 10 mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 3% by weight of cement applied over roof slab complete all as specified and directed . Note:-WPC shall be measured and paid seperately under respective item

Supply only integral water proofing compound complete all as specified and directed

M&L for provn of water proofing roof treatment to RCC roof with approved APP modified membrane of weighing not less than 3 kg/sqm comprising with following items complete all as specified and directed.

The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.

Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm

Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (+10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc.

Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane

M&L for aluminium paint in two coats @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed

M&L for cement concrete tiles 25cm x 25cm x 22mm thick,with grey cement and no pigment, machine pressed; set, jointed and pointed in neat cement slurry in floors, and cut and polished laid over and including 15mm screed bed in CM (1:4) complete all as specified and directed

A Raza Enterprises

SAGAR MOTOR AND TRACTOR CO

M/s Mohan Singh

M K Construction

M/s Rahul Kumar Agrawal

M/s Om Infracon