Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 29 A RANI KA BAG AMRITSAR | AMRITSAR | PUNJAB | 143001 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
Tender Value
Refer Docs
EMD Value
₹14.3 L
Closing Date
31 May 2021, 5:00 pmClosed
Er. Manmohan
Executive Engineer Provincial Division Gurdaspur
Upgradation of Link Road Dhariwal Bhumbli Sidhwan Road Package No PB06306 in Distt Gurdaspur PMGSY 3
2021_PWDBR_109370_1
PMGSY 07 Dated 05.05.2021
Open Tender
Civil Works - Roads
450 days
Block Dhariwal
Please refer Tender documents.
7 documents required · 7 mandatory
₹30,000
Executive Engineer Provincial Division
₹14.3 L
Gurdaspur
27 Jul 2021
11 May 2021
1 Jun 2021
11 May 2021
31 May 2021
11 May 2021
20 May 2021
Amount
Clearing grass and removal of rubish upto a distance of 30m out side the periphery of the area as per Technical Specification clause 201
Construction of embankment with approved materials obtained from borrow pits with a lift upto 1.5m, transporting to site, spreasing, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with lead upto 1000m as per Technical Specification Clause 301.5
Scarifying the Existing Bituminous Road Surface to a depth of 150mm and disposal of scarified material with a lift upto 3m and lead upto 1000 m as per Technical Specification Clause 301.4
Providing and laying brick on end edging
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 404.
Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405.
Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502
Providing and laying bituminous macadam Bitumen VG-10 with hot mix plant using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder, transported to site upto a lead of 1000 m laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled to achieve the desired compaction as per Technical Specification Clause 504.
Providing and applying tack coat with Bitumen (VG-10) using Pressure distributor at the rate of 0.275 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
Providing, laying and rolling of open-graded premix carpet Bitumen VG-30 of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type B as per Technical Specification Clause 508.
Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A, Type B and Type C as per Technical Specification Clause 510
Construction of Cross/Side drainage works
Earth Work in Excavation for Foundation of Structures upto 3 m depth as per drawing and tech. specifications clause 1104 including setting out, const, of shouring and bracing, removal of stumps and other deleterious matter, dressing of sides and botton and backfilling with apporved material
Plain Cement Concrete M 10 (1:3:6 nominal mix) in open foundations Complete as per drawings and technical Specification Clauses 802,803,1202 and 1204
Brick Masonry work in cement mortar 1:3 in foundation of Head Walls Complete excluding pointing and plastering as per drawing and technical specification Clauses 600, 1202, 1203
Brick Masonry work in cement mortar 1:4 in foundation of Complete excluding pointing and plastering as per drawing and technical specification Clauses 600, 1202, 1203
Plain/reinforced Cement Concrete (1:2:4 M-20) in Sub Structure Complete as per drawings and technical Specification Clauses 802,805 1201 and 1204
Plain/reinforced Cement Concrete (RCC Grade M-25) in Sub Structure Complete as per drawings and technical Specification Clauses 802,805 1201 and 1204
Supplying, Cutting, fitting and placing HYSD (Fe500/550) reinforcement bars in substrucure complete as per drawings and technicall Specificatio clauses 1002,1005,1010 and 1202
Plain/reinforced Cement Concrete (RCC Grade M-25) in Open Foundation Complete as per drawings and technical Specification Clauses 802,805 1201 and 1204
Providing and Filling Joint Sealing Compound as per Drawings and Technical Specifications With Coarse sand and 6 Per Cent Bitumen By weight
Deep Struck Pointing with Cement Mortar (1:3) on brick work in sub structures as per technical specification Clause 613.3, 1204
Providing and Laying C.C. Flooring 1:2:4 for bed protection as per MORD Specifications 1303
Wrought Iron & Mild Steel Ladders, Framed Grills, Granings etc. with ends of bars rivetted of modled forged window guards, barred iron doors stair case iron railling etc. including cost of bolts and nuts, screws, welding rod complete fixing in position
Painting Two Coats including Primer Coat after filling the surface with synthetic enamel paint in all shades, including prepration of surface complete as per technical Specification
Supplying of fine sand and back filling as filter media along and behind abutments wing walls complete as per technical specifications clause 1204.3.8
Plastering with cemen mortar (1:4) 15mm thick on brick work in sub structure as per technical specification Clause 613.3
Providing and fixing road furniture and PMGSY boards as per MORD specifications
Providing and fixing of typical PMGSY Logo sign board (Double Sided) as per MORD specifications and drawing.Retro-reflective tape fixed on 3 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable background duly fixed on MS angle iron frame of 25mm x 25mm x 3mm. The angle iron frame welded to 1 no. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. The top diamond plates will be welded to SWG steel plate tube. All M.S. will be stove enameled on both sides. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Providing and fixing of typical PMGSY Title informatory sign board with Logo as per MORD specifications and drawing. Retro-reflective tape fixed on 4 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable background duly fixed with MS angle 25mmx25mm x 3mm size on back on edges. The lower plate 4mm will be fixed with MS flat of 50mm x 5mm. The flat iron frame of plate fixed to 2 nos. 75mm x 75 mm of 4mm sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. The top diamond plate will be fixed to lower plate by 47mm x 47mm of 12 SWG steel tube. All M.S. will be stove enameled on both sides. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Providing and fixing of typical PMGSY Citizen Informatory sign board with Logo as per MORD specifications and drawing. Retro-reflective tape fixed on 4 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable background duly fixed with MS angle 25mmx25mm x 3mm size on back on edges. The plates welded with MS flat of 50mm x 5mm. The flat iron frame of plates welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 600mm x 600mm x 750mm, 750mm below ground level. All M.S. will be stove enameled on both sides. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1
Providing and fixing 900x600mm village boards Retro-reflective tape fixed on 3 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable
Providing and fixing 600x600x600mm Circular Retroreflective Tape fixed on 3mm thick Aluminiu, Composite material (ACM) sheet including lettering & signs as applicable
Providing and fixing of 600mm circular Retro-reflective tape fixed on 3 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable
Providing and fixing of 600mm cautionary mandatory circular Retro-reflective tape fixed on 3 mm thick Aluminium Composite material (ACM) sheet including lettering & signs as applicable
Hazard Marker sign board 300x900mm rectangular as per IRC 67-2012 with retro reflective high intensity microprismatic grade sheeting fixed over 3mm thick aluminium sheet with 25x25x3mm angle iron frame supported on a mild steel angle iron post 65x65x6mm firmly fixed to ground including foundation concrete 1:2:4 of size 0.45x0.45x0.60m for vertical post complete as per technical clause 801 of MORT&H specifications
Reinforced cement concrete M15 grade 5th kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703
Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1704
Reinforced cement concrete M15 grade 200 mtr stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703
Providing and road marking with thermoplastic paint for Zebra crossing at school etc. as per CSR 24.57
Providing and fixing of road stud 100 x 100 mm die cast in aluminium, resistant to corrosive effect of salt and grit, fitted with lense reflectors, installed in concrete or asphaltic surface by drilling holes 30 mm upto a depth of 600 mm and bedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part 4) 1973.
Provision of 15 nos. rumble strips covered with premix bituminous carpet, 15-20 mm high at centre, 250 mm wide placed at 1 m centre-to-centre at approved locations to control speed, marked with white strips of road marking paint.
Routine Maintenance after completion of construction worksas perperiodicity to Routine Maintenance mentioned in the contract data.
AMC for 1st Year (Fixed Rates for Ist Year i.e. 51360.00 Per Km Bidders/Vendors need nor to quote for this)
AMC for IInd Year (Fixed Rates for IInd Year i.e. 61718.00 Per Km Bidders/Vendors need nor to quote for this)
AMC for IIRD Year (Fixed Rates for IInd Year i.e. 83602.00 Per Km Bidders/Vendors need nor to quote for this)
AMC for 4th Year (Fixed Rates for 4th Year i.e. 105487.00 Per Km Bidders/Vendors need nor to quote for this)
AMC for 5th Year (Fixed Rates for 4th Year i.e. 127370.00 Per Km Bidders/Vendors need nor to quote for this)
C & C CONSTRUCTION COMPANY
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Download all tender documents and submit your bid