PROVISION TO CONNECTED ROAD TO SWT OF COMMAND HQ BUILDING AND CONNECTED PATHWAY TO DSOI HQ AT VSN NAGPUR

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers not exceeding 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., using power roller 8 to 12 ton, not exceeding 1.5m high from base complete all as specified and as directed.

Rolling and consolidating formation surfaces in cutting using power roller 8 ton to 12 ton complete all as specified

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

Material and labour for soling or sub base 150 mm thick (spread thickness) (or sub base) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber all as specified.

Material and labour for 15 cm thick (compacted thickness) WBM with coarse aggregate of grading 2 (63 to 40 mm size) of granite, trap or basalt, spread rolled and consolidated to gradient and camber required all as specified and directed.

Material and labour for preparing un-surfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt all as specified and directed.

Material and labour for applying evenly a priming/ tack coat with bituminous primer (using paving bitumen VG-10) at the rate of 10 kg per 10 sqm of road surface complete all as specified.

Material and laobour Bituminous pre-mixed semi dense asphaltic concrete 30mm consolidated thickness with 5.5 % (Bitumen VG-30) binder content by weight of total mix, by hot mix process and laid by mechnical paver finisher, to required camber and gradient using 8 to 12 ton power roller and compacted all as specified and directed.

Material and labour for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface all as specified and directed.

Material and labour for PCC (1:3:6) type C2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and directed.

Material and labour for dry river sand 50mm thick for cushioning below interlocking paver blocks including spreading, levelling, watering and consolidation complete all as specified and directed. Note: Consolidated thickness only shall be measured.

Material and labour for machine pressed precast prepolished concrete interlocking paver block approved shape/pattern and size with grey or white cement and pigments confirming to IS 15658-2006 of 60mm thickness, M-35 grade all as specified and directed

Material and labour for factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3, including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, size of curb stone is as required at site & as approved by GE complete all as specified and directed

Excavation in post holes ( or similar holes) in hard/dense soil each n.exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with eath around, in layers n.exc 25cm , watering, and removing surplus soil to a distance n.exc 50m and making good surface completed all as specified and directed.

Material and labour for PCC 1:2:4, type B1 using 20mm graded stone aggregate for embedding posts all as specified and directed.

Material and labour for mild steel work in tubular trusses including special shaped washer etc, complete using ERW or induction butt welded tubes conforming to I S 1161-1979, grade St-240 complete all as specified and directed.

Material and labour for mild steel plates (plain or chequred) channel squre cut notched ordinary and counter sunk forming holes without any attachment for Fe-410w grade E-250 quality A complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end not exceeding 5 cm long and diameter of neck exceeding 10 mm but not exceeding 15mm dia complete all as specified and directed.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square head at one end and screwed the other end exceeding 22.5 cm long but not exceeding 30 cm long and diameter of neck exceeding 10 mm but not exceeding 15mm dia complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

Supply and fix pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and as directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles including cleaning of debris complete all as specified and directed.

Material and labour for 15mm thick rendering (external) on fair faces of masonry or concrete surfaces of wall in CM 1:4, finished even and smooth without using extra cement complete all as specified and directed.

Supply and fix mld steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc. complete drilled for fixing of steel sheeting or other covering, doors etc. to prepared for hanging or sliding with and including either hooks and hinges or steel hanging doors fittings and hanging, also fastening and fixing complete all as specified and as directed.

M/S Darshan Singh Plaha