Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC KALIBARI ROAD TINSUKIA TINSUKIA ASSAM 786171 | TINSUKIA | ASSAM | 786171 | L1 | Accepted-AOC DUE TO L1 RATE | |
| 2 | L2₹15.9 L+₹60,955 (3.99%)Rejected-Finance | L2 | Rejected-Finance BEING OTHER THAN L1 BIDDER | |
| 3 | L3₹16.5 L+₹1.2 L (7.59%)Rejected-Finance MILLONALLY LANE 3 POST TINSUKIA ASSAM PIN 786125 | TINSUKIA | TINSUKIA | ASSAM | 786125 | L3 | Rejected-Finance BEING OTHER THAN L1 BIDDER |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
29 Jun 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE LEKHAPANI
TINSUKIA ASSAM
REPAIR TO LEAKAGE SEEPAGE PLUMBING AND MISC WORKS IN ZONE I II AND VI OF VARIOUS UNIT AT LEKHAPANI UNDER GE LEKHAPANI
2024_MES_651242_2
8786/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE LEKHAPANI
Class E and category a (i)
9 documents required · 9 mandatory
₹500
Yes
GE LEKHAPANI
₹30,000
Yes
31 Aug 2024
10 Jun 2024
1 Jul 2024
10 Jun 2024
29 Jun 2024
15 Jun 2024
Amount
Taking down existing treatment of any description and any numbers of layer from roof including scraping and roughening old by picking, sweeping clean and washing down complete all as specified and as directed
M & L for rendering 15mm thick cement mortar 1:4 over Roof mixed with water proofing compound as per manufacture instruction instruction finished even and smooth complete all as specified and as directed
M & L for applying APP modified bituminous water proofing membrane with polyester reinforcement and plain finish of 3 mm thick (not less than 3.8 kg/ sqm ± 5 % per sqm) consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25° C, 0.87-0.89 kg/ litre and viscosity 70-160 cps over the primer coat the layer of membrane shall be laid using Butane Torch and sealing all joints etc. and including applying bituminous aluminium paint @ 0.125 Kg / sqm on finished APP surface complete all as specified and as directed.
Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as directed.
Cutting out cracks to V-section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as directed.
M & L for 1.5mm thick self adhesive water proof membrance consisting of SBS modified bitumen compound covered on top with high density HDPE film with a reinforcement of glass fibre of polyester fixed over Asbestos/CGI sheet after cleaning the surface complete all as specified and as directed
Demolition of unreinforced cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.
M& L for Cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate in cills, seismic and other similar bands, plinth courses, copings, bed plates, bond stones, etc including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete.
Supply only Integral liquid water proofing compound conforming to IS-2645-2003 complete all as specified.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified
Taking up or down steel water tubing and connections, including cleaning for re-fixing or removal from site, for bore of pipes 20mm dia complete all as specified and directed.
Taking up or down steel water tubing and connections, including cleaning for refixing or removal from site, for bore of pipes 15mm dia complete all as specified and directed.
S&F 15mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubings or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete.
S&F 20mm dia bore of pipes, medium grade, galvanised iron, with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified & directed.
S&F PVC (SWR) pipes 110mm dia single socketed, in any length with rubber ring joints, fixed to walls as in repair complete all as specified and as directed.
S&F PVC (SWR) pipes 75mm dia of single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.
S&F PVC (SWR) bends 110mm dia any radius with out access door all as specified and directed.
S&F PVC (SWR) bends 75mm dia any radius provided with access doorall as specified and directed.
S&F PVC (SWR) junction single, (single T) 110mm dia any radius provided with access door all as specified and directed.
S&F PVC (SWR) junction single (single T) 75mm dia any radius provided with access doorall as specified and directed.
Dismantling water tanks exc 250ltr but not exceeding 500ltr capacity complete all as specified and as directed.
S&F rotational moulded polyethylene water storage tanks of 500 ltr capacity,(cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I & as directed.
S&F 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.
S&F in repair 20mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball, screwed for iron pipe & fixed (Minimum weight 210 gms) complete all as specified & as directed.
S& F in repairs 20mm Gun metal,globe or gate valve, with iron wheel head screwed both ends for iron pipe and fixed complete
Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) Exc 250 Ltr an Nexc 500 Ltr.
M & L for Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc.
M&L Taking down existing plaster over window chajja and similar location of area n exc 2 Sqm in patch work and applying primer coat of Pidilite 301 URP (@ 4 sqm per ltr of URP)mixed with cement in proportion 1:1 the and and applying 15mm thick cement plaster in CM 1:4 mixed with WPC of Pidilite 101 of 200ML for 50 Kg of cement and applying two coats of Cement Base Paint with and including necessary preparation to match with the existing shade.
Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water & removal of debris off the premises etc. complete all as specified & directed.
M&L for rendering 15mm thick in CM 1:4 mixed with WPC and finished fair and even all as specified and directed by Engr-in-Charge. (Note : WPC measured seperately)
Material and labour for preparation of new surfaces of walls , chajja , facia , roof projection and applying two coat of cement base paint , white or tinted over a coat of external primer including washing floors, cleaning glass, joinery,electrical fittings, wiring etc. , of drops and splashes complete all as specified .
Dismantling of plain or corrugated steel / Asbestos sheeting any guage, thickness including Nanital or similar pattern roof coverings complete all as specified and as directed.
M&L for pre-painted hot dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550 MPa as in roof covering fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed
M&L for hot dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ 150, 0.50mm thick of an approved colour and having yield strength of 550MPa as in ridge/valley/gutter/eaves boardings fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided complete
S&F steel work in tubular truses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161/4923 of grade (Yst-310) complete all as specified and directed
Demolition of floor, hearth or wall tiling including cement mortar bedding incl backing, and rubbish off the premises all complete.
Demolition of lime concrete/ lean concrete/ brick bats from sunken portion exc. 15 cm thickness (above ground level), including removal of rubbish outside MoD land, complete all as specified.
Material and labour for water proofing treatment to sunken floor with the following course of treatment as specified below, all as per manufacturer’s instructions complete and all as directed by Engr-in-Charge :- (i) Cleaning top surface of floors/slabs and laying 50mm thick (avg) PCC of grade M10 (Nominal mix), mixed with WPC as per manufacturer’s instruction laid in slope 1:20 towards spouts including coveting corners. (ii) 15 mm thick plastering in CM (1:4) on sides & bottom mixed with WPC as per manufacture’s instruction. (iii) Applying 1st layer of slurry of cement @ 0.488 kg/sqm mixed with acrylic based polymer modified Cementitous compound @ 0.253 kg/sqm. This layer shall be allowed to air cured for 4 hrs. (iv) Applying 2nd layer of slurry of cement @ 0.242 kg/sqm mixed with acrylic based polymer modified Cementitous compound @ 0.126 kg/sqm. This layer shall be allowed to air cured for 48 hrs. (v) Applying a coat of industrial bitumen 85/25 conforming to IS:3384:1986 penetration @ 1.50 kg/sqm on plastered and concrete surface. (iv) Providing 150 micron thick polyethene sheet in two layer (each 75 micron measured dry on dry surface over a coat of PU primer including preparation. (vii) 2 Nos 32mm bore GI medium grade 450mm long spout to be provided through external wall to drainout accumulated water. (viii) Sunken floor shall be tested for water tightness as specified at para 12.3 of PS. (ix) Sunken portion shall be filled with lean concrete of grade (1:3:6) type C-2 (using 40mm graded stone aggregate)
M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded stone aggregates), in sub base of floors, finished even & fair to receive bedding layer of cement mortar complete all as specified and directed.
M&L for glazed coloured ceramic tiles in vertical surface 450x300 x 7mm , with an highlighter tile of same size of one row at the top of each toilet/bath/kit to be provided and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles laid over & including 10 mm thick rendering as in backing wall plaster in cement mortar (1:4) complete all as specified & directed.
M&L for coloured Anti skid joint free ceramic tiles of 7mm to 8mm thick (Approx Size 300x300) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified & directed.
S&F in repairs vitreous china squating pan, 'Orissa' pattern, size 580x440mm white, with integral foot rests, including 100mm cast iron 'P' or 'S' trap and 100mm cast iron sanitary connection socket to fit WC outlet including connection to trap, to flushing pipe, anti-syphonage pipe etc. complete including making good to floor complete all as specified and directed.
S&F in repairs 15mm bore dia angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified & directed.
S&F in repairs Bib taps cast copper alloy chromium plated with crutch or butterfly handle, fancy type, screwed down, screwed for iron pipe or for brass ferrule 15mm bore complete all as directed.
S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.
M&L 75mm dia PVC (SWR) floor trap/nahani trap, plain with grating including jointing with solvent cement complete all as specified and directed.
M&L for PVC connections of PTMT, non corrosive, with nuts & washers on both ends, 450 mm longs suitable for 15 mm bore, ISI marked, fixed in repairs, complete all as specified.
S & F CP Brass wall mixer with L Bend with provision for over head shower for mixing hot and cold water screwed down for iron pipe and fixed for 15mm bore dia of pipes complete all as specified and as directed
S & F 100mm dia size chromium plated overhead shower ABS with Brass Arm 225mm and flange complete all as specified and as directed
S&F PTMT shelf fixed with and incl chromium plated brass screws and wooden/plastic leats (Min weight 300gms) complete all as specified & as directed
M&L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and evenly applying two coats of synthetic enamel paint (1st quality) over a coat of red oxide primer including cleaning, stopping and rubbing down and removing all dropings etccomplete all as specified and directed.
ASSAM VALLEY CONSTRUCTION
M/S D R GOPE
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .