Repair of roof and providing and fixing ceiling work in hall above the guest house at MC Solan office ward no.7 Electrical work.

Amount

Wiring of light point / fan point / exhaust fan / call bell point with 1 5 Sq. mm PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (fleaxible) copper conductor cable in surface/recessed PVC conduit with modular switch, modular plates, suitable GI/PVC Box and earthing the light point with 1.5 sq mm HRFRLS/PVC insulated single core copper conductor cable as required Group C

Wiring for power plug with 2X2.5 sq mm PVC insulated heat resistant flame retardent(HRFR) and low smoke single core(flexible) copper conductor cable in surface/Recessed PVC conduit along with 1 No..75 Sq.mm HRFRLS/PVC insulated single core copper conductor cable for earthing as required

Wiring for circuit/sub main with following size PVC insulated heat resistant flame retardent(HRFR) and low smoke single core(flexible) Copper conductor cable in surface/recessed PVC conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required

Supplying and fixing 6Module Modular GI/PVC box with modular plate and cover in recess including providing and fixing 5 pin 5/6 amp socket outlet and 5/6 amps.Switch and 5 pin 15/16 amp socket outlet and 15/16 amps.Switch connections etc. as required

Supplying and fixing 12Module Modular GI/PVC box with modular plate and cover in recess including providing and fixing 5 pin 5/6 amp socket outlet and 5/6 amps.Switch and 5 pin 15/16 amp socket outlet and 15/16 amps.Switch connections etc. as required

Supplying and fixing 18Module Modular GI/PVC box with modular plate and cover in recess including providing and fixing 5 pin 5/6 amp socket outlet and 5/6 amps.Switch and 5 pin 15/16 amp socket outlet and 15/16 amps.Switch connections etc. as required

Providing and fixing fan regulator for controlling speed of ceiling fan.

Providing and installation of following surface mounting slim square type LED downlight in white finish with anti-glare polycarbonate diffuser and energy efficient constant curent no integral electronic driver suitable for input voltage AC 220-240 V, 50/60Hz, complete with all accessories, connections,testing and commissioning etc. as required MAKE:-Philips,Syska,Panasonic,havells or any other approved by Engineer-in-charge,

Supplying and fixing of following way segregated TPN double door sheet MCB distribution board. With provision to mount SP MCBs and DP MCB.Make:- Legrand, Anchor, Havells or any other approved by engineer in charge.

8way TPN

Supplying and erection of 6 amps to 32 amps ration 10KA breaking capacity,240V , 'C’ curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:- Cat-A

Supplying and erection of 40/50/63 amps rating 10KA breaking capacity 240V ’C’ curves, miniature ccircuit breaker of following pole in the existing MCB DB complete with connections etc. as required:-lsolator FP-63 amp Cat-A

Providing, installation, testing and commissioning of ceiling fan with regulator , including wiring the down rods of standard length (up to 30cm) with 16/0.20mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: make: havells,Bajaj,Anchor, Crompton greaves, or any other approved by Engineer-in-charge.

Celing fan 1400mm sweep

Providing and installation of following recessed ceiling mounting slim LED panel light in white finish with anti-glare polycarbonate diffuser and energy efficient constant curent no integral electronic driver suitable for input voltage AC 220-240 V, 50/60Hz, complete with all accessories, connections,testing and commissioning etc. as required MAKE:-PhiIips,Syska,Panasonic,havells or any other approved by Engineer-in-charge.

Panel 10W

Providing and installation of light duty,pIastic body, ventilating fan of following sizes in the existing opening, by means of suitable rag-bolts/nuts, including making the hole to suit the size of above fan making good the damages, connections, testing and commissioning etc. as required complete in all respects to the satisfaction of the engineer in charge:-Make: Havells,Bajaj,Crompton,Anchor or any other approved by Engineer-in-Charge.

Exhaust Fan,heavy duty 380mm sweep

Providing and fixing bus bar 100Amp with copper strips including thimbles, nut bolt etc. complete in all respects

Providing and fixing bus bar 63Amp with copper strips including thimbles, nut bolt etc. complete in all respects

Providing and fixing MCCB 100Amp complete with box, spreader terminal, thimbles etc. complete in all respects.

Providing and fixing MCCB 160Amp complete with box, spreader terminal, thimbles etc. complete in all respects.

Providing and fixing LED Strip light with adaptor to be fitted inside Cope complete in all repects

Nitin Bhasin (BID ID -516813)

SHASHANK KUMAR (BID ID -516746)

Vivek Dobhal (BID ID -516822)