REPAIR TO JOINERY AND SANITARY FITTINGS FOR OFFRS JCOS ORS OF MAP AND MD ACCN AT SEVOKE UNDER GE SEVOKE ROAD

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed

M&L for non skid ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 20mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18sqm but not exceeding 0.38 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 10mm thick screed bed or bedding layer of CM 1:3 for laying of floor finishes complete all as specified and directed.

M&L for non skid ceramic coloured tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles with and including 15mm thick screed bed or bedding layer of CM 1:6 for laying of floor finishes complete all as specified and directed.

M&L for coloured 450x300x7 mm thick glazed ceramic tiles on vertical surfaces such as skirting,dado and risers to steps etc, set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match, over and including 10mm thick cement mortar backing coat in CM 1:3 etc, complete all as specified and directed.

M&L for vitrified ceramic tiles 8-10mm thick (square/rectangular) polished ,area of each tile not exceeding 0.36 sqm of light shade in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished ,area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for vitrified double charged dark shade ultra charged ceramic tiles 8-10mm thick (square/rectangular) polished ,area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in skirtings etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over and including 15mm thick screed bed in cm 1:6 complete all as specified and directed.

M&L for vitrified double charged dark shade ultra charged ceramic tiles 8-10mm thick (square/rectangular) polished ,area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floor over including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Demolition of cement concrete in ground floors (un-reinforced) and paving not exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC 1:2:4 type B-1(using 20mm graded crushed stone aggregate) as in coping, bed plate, fillets or similar works including rounded or chamferred on edge with and including providing necessary form work complete as specified and directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded mechanically crushed stone aggregate) as in plinth protection/footpath, surface to be finished even and smooth without using extra cement laid in alternate bays and joint to be filled with bitumen filler complete all as specified.

M&L chequred cement concrete tiles 20cmx 20cmx25mm/30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and no pigment laid over and including 20 mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 Type B-0 (using 12.50 mm graded crushed stone aggregate) as in floor finished even and smooth using extra cement complete all as specified and directed.

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete all as specified and directed.

M&L for 15mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finshed even and smooth without using extra cement complete all as specified.

M&L for 20 mm thick rendering on fair faces of brick work in CM 1:4 in two layers of 10mm each using water proofing compound in top layer only including finishing the surface even and fair(WPC shall be measured and paid seperately) complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as in ceiling finished even and smooth without using extra cement complete all as specified.

Supply only water proofing compound complete all as specified and directed.

M&L for preparation of new plastered surface and applying two coats of cement base paint over a coat of primer on wall etc complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of ceiling and applying three coats of white washing complete all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat alkali resistant primer all as specified and directed. .

M&L for preparation new or previously untreated steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation new wooden surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coats of white wash complete as specified and directed.

M&L for preparation of old decorated surfaces of ceiling. including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coats of white wash complete as specified and directed.

M&L for complete removal of existing treatment of wall and applying two coats of oil bound distemper over one coat of primer complete as specified and directed.

M&L applying 1-2 mm mm thick wallcare putty on wall complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including washing, rubbing down and stopping of distempered surface and applying one coat of distemper of any tint on walls complete all as specified and directed.

M&L for complete removal of old decorated surfaces of walls and applying two coats of cement base paint over a coat of primer on wall complete as specified and directed.

M&L for preparation of old plastered surface and applying one coats of cement base paint on walls complete all as specified and as directed,

M&L for complete removal of existing treatment and and applying two coats of weather resistant exterior emulsion over 1 mm wall care putty and a coat of primer on wall etc complete as specified and directed.

M&L for preparation of old decorated surfaces of walls including brooming down or steel wire brushing scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coats of weather resistant exterior emulsion paint complete as specified and directed.

M&L for preparation of old painted surface of wood of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete as specified and directed.

All as per item No 35 above but on steel surfaces complete as specified and directed.

Re-writing letters or figures (Block, Roman, Italic or Indian) n.exc 30cm height with synthetic enamel paint complete as specified and directed.

M&L for removing moss, grass, roots, sapling etc over RCC roof and spreading bleaching powder @ 0.5 Kg/sqm and scrubbing with coir fiber and finally cleaning down with water complete as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks using old size bricks straight or curved on plan exc 6 meter mean radius built in CM 1:6 complete all as specified and as directed.

M&L for brick work with sub class "B" bricks using old size bricks straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.

M&L for cement concrete 1:2:4 type B-1 (Using 20mm graded crushed stone aggregate) as in surface channels and drains including providing necessary formwork complete all as specified and directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position and removing rubbish off the premises complete all as specified and as directed.

M & L for reinforcement with 8mm dia mild steel TMT bars cut to length bent to shape required incl cranking bending spirally for hooping for coloumns hooking ends and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified.

M&L for RCC 1:2:4 type BI (using 20 mm graded crushed stone aggregate) nominal mix as in fins, facias,chajja,lintel etc complete all as specified and as directed.

M&L providing precast cement concrete 1:2:4 type B-1 (20mm graded crushed stone aggregate) as in cover slabs for drain set in CM 1: 6 including form work complete all as specified and as directed

M&L for use and waste form work to fins, louvers, fascia chajja, lintel, etc. for fair finished flat surfaces of concrete, complete all as specified.

Taking down PVC door and frames with shutter ( without taking off shutter from the frames ), area n. exc. 1.5 Sqm each complete all as specified.

S&F PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube fixing in opening as per specification & drawing all as specified and directed.

S&F factory made soild panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed togehter with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and directed.

S&F 12 mm thick frameless single leaf/double toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot and cover plates with brass pivot and single piece M.S sheet outer box with slide plate etc and making necessary holes etc for fixing required door fittings and lock, incl door handle lock and stopper floor spring etc complete all as specified and as directed.

S & F Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing complete all as specified and directed by the Engr-in-Charge.

M&L for etching to 12 mm thick toughened glass by mechanical/manual means and making approved design/pattern/logo all complete as directed by the Engineer in charge.

S&F stainless steel door handles of size 450 mm of approved make complete all as directed by the Engineer-in-charge

Providing & fixing stainless steel door lock of approved make complete as per direction of Engineer-in-charge.

S&F Floor door stopper with overall length of cover plate 150 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed

M&L solar control film 25 micron reflective type sticked to glass panes as per instuctions of manufacturers complete all as specified and as directed

Hacking out old broken glasses ( any thickness/type and in any position ) from wooden frames/metal frames fixed with oil putty or beads etc and removing from site complete all as specified and as directed

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins not exceeding 0.50sqm each pane complete all as specified and directed.

S&F in repairs sheet glass ordinary quality 3mm thick and glazing with oil putty and securing pins exceeding 0.50sqm each pane complete all as specified and directed.

S&F in repairs 3mm thick figured glass pin head type and glazing with oil putty in squares not exceeing 0.50 sqm in each pane complete all as specified and as directed.

M&L for preparation new steel surfaces of any description over 10cm width of grith and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F in repairs vitreous china squatting pan "ORISSA" patern of size 580x440mm white, with integral foot rests (excluding flushing cistern & flush pipe) including provisioning of lime concrete bedding complete all as specified.

S&F in repair vitreous china EWC white with 'P' or 'S' trap front or back inlet any pattern excluding flushing cistern & flush pipe but including plastic water closet seat black closed pattern with flat bottom and cover and hinging device complete all as specified.

S&F 15mm bore CP Toilet Hand Pressed Nozzle (Heath faucet) with 1.5 mtr long tube with CP wall bracket including taking down the old one complete all as specified and as directed.

S&F in repair PVC valveless, syphonic action type flushing cistern low level, 10 litre capacity with it's complete accessories, including connection to water pipe and PVC 32 mm dia flush pipe etc complete all as specified and as directed.

S&F in repairs vitreous china ware wash hand basin white colour flat back of size 550x400mm including CI brackets, CP brass waste coupling 32mm etc complete all as specified.

S&F in repairs CP brass towel rail 60cm long including fitting complete all as specified and directed.

S&F in repairs CP brass overhead shower 80mm dia round shape with and including CP brass shower arm 240mm long with wall flange complete all specified and directed.

Taking up or down 15 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down 20 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.

Taking up or down 25 mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified.

Cutting chases in brickwalls girth exc 10 cm but n exc 20 cm , pinning in making good to facings where required and pointing in cement mortar 1:3 for conceled water tubing etc and making good complete all as specified.

Supplying and laying of 20mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. Note:- Quoted rate includes all plain CPVC fittings and pipe cuttings fixing with CPVC solvent cement and testing. Quoted rate do not includes for special fittings (CPVC Brass fittings). These shall be measured & paid under relevant items of this schedule.

Supplying and laying of 25mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. Note:- Quoted rate includes all plain CPVC fittings and pipe cuttings fixing with CPVC solvent cement and testing. Quoted rate do not includes for special fittings (CPVC Brass fittings). These shall be measured & paid under relevant items of this schedule.

S&F 20 mm dia brass Elbow for CPVC connection complete all as specified and directed.

S&F 20 mm dia brass Elbow (3/4" x 1/2") for CPVC connection complete all as specified and directed.

S&F 20 mm dia brass Tee in CPVC connection complete all as specified and directed.

S&F 20 mm dia male brass Threaded adaptor (MTA/MBTA) for CPVC connection complete all as specified and directed.

S&F 20 mm dia female brass Threaded adaptor (FTA/FBTA) for CPVC connection complete all as specified and directed.

S&F 20 mm dia brass union in CPVC connection complete all as specified and directed

S&F 15 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.

S&F 20 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.

S&F 25 mm bore medium grade galvanized steel water tubing with all fittings fixed to wall/ceiling or laid in floor complete all as specified.

Refixing old steel tubing 15 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified.

Refixing old steel tubing 20 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified.

Refixing old steel tubing 25 mm bore and connections in new or old position (walls/ceilings/floors etc) complete all as specified.

Dismantling PVC water tank of capacity Exc 250 Litre and not Exceeding 500 Ltr complete all as specified and directed

Dismantling PVC water tank of capacity Exc 500 Litre and not Exceeding 1000 Ltr complete all as specified and directed

Dismantling PVC water tank of capacity Exc 1000 Litre and not Exceeding 2000 Ltr complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks of 500 litre capacity double layer black in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks of 1000 litre capacity double layer black in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed

S&F Rotational moulded polyethylene water storage tanks 2000 litre capacity double layer black in colour (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed

S&F in repair Bip tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 90gms complete all as specified and directed.

S&F in repair Pillar tap standard of PTMT any colour screwed for iron pipe and fixed (Minimum weight 15mm - 110gms) complete all as specified and directed.

S&F in repair Stop Valve standard of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm - 90gms) complete all as specified and directed.

S&F in repair 15 mm bore bib tap fancy type chromium plated cast copper alloy with capstan head wall flange screwed down screwed for iron pipe complete all as specified and directed.

S& F in repair 15 mm bore Angle stop cock (male or female thread) cast copper alloy, chromium plated fancy type with capstan heads, wall flange screwed down screwed for iron pipe complete all as specified and directed.

S& F in repair Concealed 15 mm bore Angle stop cock (male or female thread) cast copper alloy, chromium plated fancy type with capstan heads, wall flange screwed down screwed for iron pipe complete all as specified and directed.

S&F in repair 15 mm bore Pillar tap cast copper alloy with capstan heads chromium plated fancy type screwed down high pressure with or without letter hot or cold with long screwed shank and flynuts screwed for iron pipe complete all as specified and directed..

S& F in repair 15 mm bore stop valve (male or female thread) cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe complete all as specified and directed.

S&F in repair Concealed 15 mm bore stop valve (male or female thread) cast copper alloy fancy type chromium plated with long shank and cup (conceled type) with capstan head wall flange etc screwed down screwed for iron pipe complete all as specified and directed. .

S&F in repair 15 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 20 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repair 25 mm bore Gun metal gate or globe valve with iron wheel head screwed both ends for iron pipe complete all as specified and directed.

S&F in repairs 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all as specified and directed.

S&F in repairs 25 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball for iron pipe complete all as specified and directed.

S&F in repairs of PVC connection pipe 15 mm dia 450 mm long with PTMT nut complete all as specified and as directed

S&F PVC waste pipe suitable for 32 mm dia waste coupling for wash hand basin complete all as specified and directed.

S&F PVC waste pipe suitable for 40 mm dia waste coupling for kitchen sink complete all as specified and directed.

S&F stainless steel grating 100mm dia over floor trap complete all as specified.

S&F in repairs sheet glass shelf assembly consisiting of 5.5 mm thick sheet glass shelf 12cm wide with CP brass bracket guard railing 60cm long complete all as specified.

S&F in repairs PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.

S&F in repairs PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed in walls or floor complete as specified and as directed.

S&F PVC (SWR) bends any radius suitable for 110mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) bends any radius suitable for 75mm bore pipe provided with access door complete all as specified and directed.

S&F PVC (SWR) 110mm Junction (Single T) equal or un equal provided with access door complete all as specified and directed.

M&L PVC (SWR) gully trap 125/110mm setting and jointed with solvent cement complete all as specified and directed.

M&L PVC (SWR) floor trap plain with grating including jointed with solvent cement of diametre 75mm complete all as specified and directed.

S&F PVC (SWR) 75mm bore junction (Single T) equal or unequal provided with access door complete all as specified and directed.

S & F in repair plastic seat cover closed pattern with flat bottom and cover fixed with aluminium hinging device complete all as specified and directed.

S&F in repair stainless steel sink with draining board, made out of 1.0mm thick sheet for kitchen or laboratory with plug washers waste pipe, cast iron cantilever brackests connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified.

S&F in repair of wall mixture CP cast copper alloy for 15 mm bore pipe with L-bend for overhead shower complete all as specified and directed.

S&F in repair 15 mm CP brass central hole wash hand basin mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed.

S&F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe including CP Spreader , flush pipe and waste pipe complete all as specified and directed.

Roughening surfaces of existing roof treatment and taking out old APP membrane and removing from site including cleaning and washing down with water to remove dust etc complete all as directed.

M&L for providing, laying water proofing treatment over plastered surfaces of RCC roof shall be as under:- (a) The dried plastered surface of slab shall be painted with one coat of bituminous primer @0.4 liter/Sqm. (b) Over the primed surface a layer of APP based polymeric membrane minimum weight of 3 kg/sqm of approved manufacturer minimum 3mm thick, reinforced with polyster non woven fabric (weighing not less than 160gms/sqm) shall be laid by torch application method. The side over laps of membrane shall be minimum75mm and the end laps shall be minimum 100mm and sealing all overlaps and joints shall be done as per manufacturer's instruction. (c) The finished surface shall be given Aluminium paint @ 0.11 Kg/Sqm on APP as per manufacturer's instructions. Make:-M/S TEXSA INDIA LTD (MOPLY-FP) / M/S STP LIMITED (SUPER THERMOLAY) / IWL INDIA LIMITED (HYPERPLAS)/M/S Tiki Tar Danosa (India) Pvt Ltd (Hydro Stop)/M/s Supreme Bituchem India Pvt Ltd (Super Shield)

M&L for 15 mm thick rendering in Cm (1:4) over RCC roof surface to receive roof treatment finished even and smooth without using extra cement mixed with water proofing compound as per manufacturers instruction (WPC shall be measured and paid separately).

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 250 liters n.exc 500 liters complete all as specified as directed.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 500 liters n.exc 1000 liters complete all as specified as directed.

M&L for cleaning of water service tank (inside area only) of any description, including scraping, scrubbing (without damaging tank surface) deposits / scales, algae formations, silt /sticky matters adhering tank surface and washing inner tank surface with approved grade of chemicals complete, of capacity exc 1000 liters n.exc 2000 liters complete all as specified as directed.

Note for item No 131, 132, and 133 (i) On completion of cleaning of tank, date of cleaning to be marked/written clearly on tank surface in an accessible location with letters or figures n.exc 5 cm high viz (as per example) "TANK CLEANED ON………….". (ii) Cleaning of tank to be carried out in accordance with the schedule published for the purpose of cleaning of tank. (iii) During cleaning of the tanks, any vegetation and growth on the roof slab shall also be removed by the Contractor and the quoted rates are deemed to include for the same.

M&L for repair of alluminium doors by dismantling the same, repair and refix the same including replacing the EPDM neoprene rubbber complete all as specified and as directed.

M&L for repair of alluminium windows/fixed partitions by dismantling the same, repair and refix the same including replacing the EPDM neoprene rubbber complete all as specified and as directed.

Taking down by unfastening all part of steel rolling shutter/collapsible shutter of any size viz hood cover, curtain of steel lathe etc and oiling, greasing the pully shaft including adjusting the spring, V-clamp, bracket plate and manual operated box along with pipe ends arrangements and refixing the same in same opening for making operative complete all as specified and directed.

S&F Steel rolling shutters of thickness 1.25 mm without ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated,complete: push pull or manual type including taking out old unsv rolling shutter and removed from site complete all as specified and directed.

S&F in repairs collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars top and bottom runners, brass handles etc as specified erected in position and securing runners with hold fast and brackets complete all as specified and as directed.

M&L for Powder coated standard aluminium section as in aluminium doors/windows/partitions etc including glazing clips, fabrication and fixing in position complete to receive sheet glass/particle board complete all as specified and directed.

S&F Powder coated Aluminium window and ventilator shutters fixed type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing, handles 02nos in each door,hinges,snap beading, screws complete all as specified and directd.( excluding panels )

Supply only 4 mm thick Sheet glass, ordinary quality any size for aluminium joinery complete all as specified and as directed

M&L solar control film 25 micron reflective type sticked to glass panes as per instuctions of manufacturers complete all as specified and as directed

S&F in repair door closer hydraulically regulated , designation No 3, universal type suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed aluminium body complete all as specified and as directed.

M&L for Grouting 25 mm thick under stanchion bases or grillages, etc. including any temporary shuttering to edges with cement mortar 1:2 and making good surface complete all as specified and as directed

M&L for Hard drawn steel wire fabric cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt weight exceed 4kg/sqm complete all as specified and directed.

S&F in repair Plain, Aluminium sheeting, Alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) 0.56mm thickness as in fixing for door bottoms complete all as specified and directed.

M&L providing precast cement concrete louvers and jallies, 50mm thick (measured solid) including all mouldings but excluding frame type B-0 1:2:4 (12.5mm graded crushed stone aggregate) set in CM 1:4 complete as sepcified and directed.(Note:-Pre cast frame if any shall be measured and paid separately under respetive item)

M&L white granite (of any type) slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

M&L Marble makrana adanga work 18-20 mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of makrana adanga complete all as specified and directed.

S & F in repair stainless steel tubular drapery rod 28mm dia as per sample complete as specified and directed.

S&F stainless steel brackets for drapery rod 28mm dia as per sample complete as specified and directed.

S&F stainless steel knobs for drapery rod 28mm dia as per sample complete as specified and directed.

Dismantling wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets any thickness, including cover fillets, complete as specified and directed.

S&F 605X605mm anodised aluminium snap grid frame work for false ceiling including 2.5mm dia mild steel wire galvanized class 3, @ 60cm centre to entre and fixed to steel or wooden member including 4mm thick decorative type non asbestos fibre cement boards fixed or laid/ inserted to aluminium frame work as in ceiling complete all as specified and directed. Note:- The size of aluminium main and croos tee shall be 40mm x25mm x2mm and size of angle shall be 25mm x 25mm x 2mm)

M & L in repairs 18/19 mm thick pre-laminated particle board exterior grade pre-laminated one side with decorative choice laminated and other side balancing white lamination fixed with screws to timber frame work as in cup board shutters, partitions and shelves complete as specified and directed.

M & L in repair 18/19mm thick block boards grade 1 quality exterior grade commercial type fixed with screws to timber frame work as in cup board shutters, kitchen cabinets, shelves etc complete as specified and directed.

M & L for external teak wood lipping 6mm thick and 18/19mm wide for block boards fixed with nails complete as specified and directed.

M & L for 1st class hard wood fillets area exc 3 sqcm but n.exc 6 sqcm wrought square or rectangular in section plain or bull nosed, splayed, chamfered or rounded on one edge or face fixed with nails complete as specified and directed.

S & F continuous (Piano) hinges mild steel bright finish or electro galvanised width of flaps when open 30mm complete as specified and directed.

S&F anodised Powder coated Aluminium window and ventilator shutters fixed type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,rubber neoprene packing, handles 02nos in each door,hinges,snap beading, screws complete all as specified and directd.( excluding panels )

Dismantling of wrought iron or mild steel work of any description not other wise provided for complete all as specified and directd

S&F rolled mild steel sections any type including hollow section as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates FE -290 Gde E-165 complete all as specified and directed.

Dismantling plain or corrugated steel sheeting any gauge or thickness as in roof covering complete all as specified and as directed.

S&F pre- painted gavalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S&F pre- painted gavalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for sunken floor treatment by roughening of sides and bottom of sunken floor by picking,sweeping clean and washing down with water to remove dust etc. and 10mm thick rendering in CM(1:4) on concrete surface (bottom sides of sunken floor) finished fair and even mixed with liquid water proofing compound 'conplast X 421 IC' mfd by M/S FOSROC chemicals (india) pvt ltd,priming coat of "Nitro proof 100" and after drying of primer applied one coat of 'Nitro proof 120' mfd by M/S FOSROC complete all as specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area exc 1.5 sqm but not exceeding 4.00 Sqm and refixing of old shutter in new chowkats completed all as specified and as directed.

Taking down chowkats with shutters (without taking off shutters from the frames) area not exc 1.5 sqm completed all as specified and as directed.

Taking down shutters not exceeding 1 sqm each complete all as specified and as directed.

Taking down shutters exc 1 sqm but not exceeding 2 sqm each complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters exc 1 sqm but not exceeding 2 sqm each completed all as specified and as directed.

S&F pressed steel frames (size-125X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .

S&F pressed steel frames (size-105X60mm) for doors with one rebate incl necessary fixing lugs, hinges, lock strike plate etc including providing one shop coat or red oxide zinc chome primer complete all as specified .

Supply and fixing factory made shutter, 35 mm thick, 2nd class hardwood rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified.

Supply and fixing 2nd class hard wood factory made 35mm thick glazed skeleton shutters, open rebated and prepared to receive glass, gauge etc. edges of framing, plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

S & F flush sutters, 30mm thick solid core contruction, with block board core and plywood face panels,commercial type on both sides complete all as specified and directed.

S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, including one coat of red oxide primer complete with glazing bars, dovetailed or welded complete all as specified and directed.

All as per item No.178 above, but without glazing bars complete all as specified and directed.

S&F Mild Steel flat iron fillets fixed to fly proof steel window shutters with screws or riveted for securing wiring gauze etc and as in wind tiles for roof complete as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces exceeding 10cm in width or girth complete all as specified and directed.

S&F Cubical of size 0.60x0.60x0.675 mtrs (minimum) madeout from 19 mm thick plywood grade BWR including front facia PVC laminated, with wall supported at back, ply on three sides, resting below cooking platform. The cubical shall have three baskets (cutlery, cup saucer and thali) made out of stainless steel of grade 304 fixed with telescopic drawer channels and accessories. The internal surface shall be laminated with white colour complete all as specified and as directed. Make of plywood/laminates:- Green ply industries/ Century / Archid.

S&F Cubical of size 0.60x0.60x0.675 mtrs (minimum) madeout from 19 mm thick plywood grade BWR including front facia PVC laminated, with wall supported at back, ply on three sides, resting below cooking platform. The cubical shall have two baskets made out of stainless steel of grade 304 fixed with telescopic drawer channels and accessories. The internal surface shall be laminated with white colour complete all as specified and as directed. Make of plywood/laminates:- Green ply industries/ Century / Archid.

S&F Mobility pantry pull out units of 12 baskets alloy steel storage system silver, full 450x560x1850x2080mm made out of stainless steel SS-304 all as directed by Engineer-in-Charge. Make : KAFF/Hettich/Godrej

S&F 19 mm thick plywood grade BWR as in cabinet all as specified and as directed . Make of plywood : Green ply industries Ltd / Century / Archid

M&L 1.5 mm thick PVC laminates and fixed with approved Adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid.

M&L 0.9 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer instructions. Make:- Green ply industries Ltd/ Century/ Archid.

S&F Aluminium anodised profile handle no protuding type and shall match the surface of cubical complete all as specified and as directed. Make: Godrej/ Hettich/ Linc

S&F Kitchen cabinet hinges 2 hole full overlay complete as specified and directed. Make: Godrej/ Hettich/ Linc

BIJAN KUMAR DHAR

D.D. BROTHERS

SHRI JAYANTA GHOSH

M/S S.B. CONSTRUCTION

ASSOCIATED TRADING CORPORATION

SRI SURAJIT SENGUPTA

SHRI JIBANDHAN PAUL