Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹43.0 LAccepted-AOC | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹46.3 L+₹3.3 L (7.64%)Rejected-Finance DHA BEMA | L2 | Rejected-Finance Not lowest | |
| 3 | L3₹48.2 L+₹5.2 L (12.1%)Rejected-Finance | L3 | Rejected-Finance Not lowest | |
| 4 | L4₹48.4 L+₹5.4 L (12.5%)Rejected-Finance BRAJANATHCHAK TOWNSHIP HALDIA HALDIA HALDIA | MEDINIPUR EAST | WEST BENGAL | 721605 | L4 | Rejected-Finance Not lowest | |
| 5 | L5₹48.8 L+₹5.8 L (13.5%)Rejected-Finance | L5 | Rejected-Finance Not lowest |
Tender Value
₹41.2 L
EMD Value
₹82,500
Closing Date
28 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE 860 EWS
GE 860 EWS
PROVN OF TOILET AND BATHROOMS FOR ORS OF 303 FD HOSP , PROVN OF SEPTIC TANK, SOAKAGE PIT AND SEWAGE LINE AT 27 RR AND PROVN OF SENTRY POST AT 303 FD HOSP AT TANGSTE UNDER GE 860 EWS
2023_MES_608326_1
8155/2023-24/E8
Open Tender
Civil Works
Item Rate
270 days
Tangste
Refer NIT
9 documents required · 9 mandatory
₹500
GE 860 EWS
₹82,500
Yes
30 Sept 2023
7 Jul 2023
31 Jul 2023
7 Jul 2023
28 Jul 2023
21 Jul 2023
Amount
Surface dressing n. exc 15 cm deep in hard/dense soil complete all as specified and directed.
Excavating in trenches n. exc 1.5 m wide and n. exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in hard/dense soil complete all as specified and directed.
M&L for PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and similar work complete all as specified and directed.
Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete etc complete all as specified and directed.
Use ans waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished square, rectangular or polygonal surfaces of concrete for rough finished surfaces etc complete all as specified and directed.
Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, helves including sup- ports, overhangs, etc. also splays between floors and beams, etc. vertical or batter for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of formwork to soffits of suspedded slabs such as roof slabs, floor slabs landings and similar work ,vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.
Use and waste of rough finished formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide rough finished surface of concrete complete all as specified and directed.
M&L Mild steel TMT bars 10mm dia and over in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L Mild steel TMT bars 6 to 8mm dia in reinforcement cut to length bent to shape required incl hooking ends and binding with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.
M&L Mild steel TMT bars for reinforcement 5mm to 10mm dia as in stirrups/spacers/binders etc. cut to length bent to shape required including bending cranking and hooking ends and binding with including MS wire not less than 0.9mm(annealed) dia complete all as specified and directed.
M & L RCC M-30 (Design Mix) (20mm graded crushed stone aggregate) in foundations, including rafts,footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed.
M & L RCC M-30 (Design Mix) (20mm graded crushed stone aggregate) in columns, pillars, piers, post and struts etc complete all as specified and as directed.
M & L RCC M-30 (Design Mix) (20mm graded crushed stone aggregate) in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed.
M & L RCC M-30 (Design Mix) (20mm graded crushed stone aggregate) in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.
Returning filling in incl spreading leveling, watering, and well, ramming in layer n.exc 25 cm in layers in hard/dense soil complete all as specified and directed.
Removing excavated material (soil) to a distance n. exc 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all as specified and directed.
M&L for Pre-cast cement concrete block masonry Type C-1 (1:3:6) 20 mm graded aggregate with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed.
M&L for rendering 5mm thick in cement mortar 1:3 on ceiling surface, finished even and smooth without using extra cement complete all as specified and as directed.
M&L for Rendering 10mm thick in cement mortar 1:6 on PCC block walling or concrete surfaces, finished even and smooth without using extra cement complete all as specified and as directed.
Rendering 15mm thick in cement mortar (1:4) using water proofing compound as per manufacturer's instruction in two layers, finished even and smooth surface without using extra cement (WPC measured and paid separately) complete all as specified and as directed.
Rendering 10mm thick in cement mortar (1:4) using water proofing compound as per manufacturer's instruction on concrete roof surfaces, finished even and smooth surface without using extra cement , (WPC measured and paid separately) complete all as specified and directed.
M&L for Glazed ceramic coloured tiles in vertical surface 300x200x7mm thick , set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for broken stone or boulder hard core of gauge exc 63 mm but n exc 100 mm deposited spread and levelled in layers not exc.15 cm thick watered and rammed to a true surfaces complete all as specified and directed.
M&L for plain cement concrete (1:3:6) type C-2 (using 40mm graded crushed stone aggregates) 75 mm thick as in plinth protection and finished the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L for Cement Concrete type C-2, 1:3:6 (20 mm graded crushed aggregate) - 100mm thick as Sub base complete all as specified and directed.
M&L for coloured Non Skid Ceramic joint free tiles 7 to 8mm thick (square/rectangular) area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for preparation of new plaster surfaces, and applying two coat of white wash on walls complete all as specified and directed.
M&L for preparation of new plaster surfaces, and applying two coat of white wash on ceiling complete all as specified and directed.
M&L for preparation of new plaster surfaces and applying two coat of cement base paint over a coat of primer complete all as specified and directed.
Supply only Integral water proofing compound for external plaster complete all as specified and directed.
S&F of 2nd class hard wood, Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
S&F plain 2nd class hardwood 35mm thick framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 100mm Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed
S&F 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed
S&F 150mm Aluminium handles, cast type, anodised complete all as specified and directed
S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed
S&F 250mm long, Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.
S&F 300mm long mild steel ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed.
S&F for 30mm thick 2nd class hard wood glazed and skelton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a) completed all as specified and directed.
S&F of 75mm size, butt hinges, cold rolled steel with screw, medium weight , ISI marked complete all as specified and directed.
S&F 100 mm size, extruded aluminium alloy handles fabricated type anodised complete all as specified and directed.
S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.
M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and directed.
S&F of 4mm thick sheet glass, ordinary quality and glazing with oil putty and glazing pins in square n exc 0.5 sq. m in each pane complete all as specified and directed.
S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 16 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F 3 layer PP-R Polypropylene random copolymer outer dia of pipe 20 mm concealed pipes SDR 7.4 (PN-16) UV stabilzed and anti microbial fusionwelded having thermal stavility for hot & cold water supply including all PPR plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc.
S&F gun-metal 20 mm bore, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
S&F 15 mm bore stop valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe complete all as specified and directed.
S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.
S&F vitreous china wash hand basin including brackets, white size 550 x 400 mm including cutting for and pinning in ends of brackets including waste fittings, brass chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other and fixed complete all as specified and directed.
S&F in repairs vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe including 100mm PVC 'P' trap complete all as specified and directed.
S&F 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including taking down unserviceable cistern complete all as specified and directed.
S&F for Vitreous China bowl type urinals, size of 465x355x265mm white(minimum) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (excluding of fixing supply pipe, flushing cistern, flush pipe, trap and waste pipe) complete all as specified and directed.
S&F urinal spreader of PTMT of any colour for fixing with 15mmdia pipe complete all as specified and directed.
S&F 32mm Dia PVC waste pipe with fly nut, coupling for sinks/urinals or wash basins etc. complete all as specified and directed.
S&F 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends complete all as specified and directed.
S&F 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and directed.
S&F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) triple layered, hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engr-in-Charge.
S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass self 12cm wide with chromium plated brackets guard and railing 60 cm long complete all as specified and as directed.
S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed.
S&F in repairs grating doom 75mm dia of PTMT (Minimum weight 25gms) complete all as specified and as directed.
Excavation over area n.exc 1.50m deep and getting out in any type of soil complete all specifie and as directed.
Excavating over areas, exc 1.5 m and n.exc. 3.00m deep and getting out in hard/dense soil complete.
M&L for precast cement concrete block masonry type C-1 1:3:6 (20mm graded crushed stone aggregate) with solid blocks, exc. 10cm in width and, setting in cement mortar 1:4 complete all as specified.
Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide,for rough finished surface of concrete complete all as Specified.
M&L RCC M 25 (Design mix) as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.
M & L for providing RCC M- 25 (design mix) in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.
M&L for RCC M-25 (Design Mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.
M & L for precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in cover slab for manholes set in cement mortar 1:4 including necessary form work complete all as specified and directed by Engineer in Charge.
M&L for Rendering 15mm thick, in cement mortar 1:4 on PCC block walling or concrete surfaces and finished even and fair without using extra cement complete all as specified and as directed
S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, complete all as specified and as directed
S&F 110 mm dia PVC (SWR) vent cowl complete all as specified and as directed
Plain cement concrete 1:3:6 Type C-2 (using 40mm graded crushed stone aggregate) as in bed to drain pipes including packing under and hunching against the sides of pipes after they are laid and tested for 150 mm bore SGSW pipe complete all as specified.
M&L for 150mm dia salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified and directed.
M&L for 20 mm MS TMT bar as in Rungs complete all as specified and as directed
M&L for preparing new steel surfaces of any description n.exc 10cm width or girth when unconnected with other painting and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed
M& L for Walling of random rubble stone masonry, uncoursed, well bonded, bedded and solidly hearted, build in cement mortar 1:6 complete all as specified and directed.
M& L for Walling of random rubble, uncoursed, well bonded, laid dry in retaining walls, abutments and similar work complete all as specified and directed.
M&L for Plain cement concrete 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping, benching bed plates and the line including necessary form work and finishing all exposed surface of concrete as per clause 4.11.16.2(a) of SSR Part-I(2009) complete all as specified and as directed.
M&L for reinforced cement concrete type B-0, 1:2:4 (using 12.5mm graded stone aggregate) as in beams, cantilevers, bressumm ers, lintels over 1.5m span complete all as specified and as directed.
M&L for providing precast reinforced cement concrete type B-1 1:2:4 (20mm graded aggregate) in landings, cover slabs (for manholes etc.) mangers, shelves and similar articles set in CM 1:6 complete all as specified and as directed.
M & L for providing RCC type B-1, 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L Concrete bed 1:4:8 type D-2 to drain pipes incl packing under and haunching against the sides of pipes after they are laid and tested bore of pipe in 150mm complete all as specified and as directed.
S&F 150mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches complete all as specified.
S&F 150mm dia bore PVC (SWR) branch piece, single (single Y) equal or unequal, complete all as specified and directed.
S&F 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to floors complete all as specified and as directed.
S&F 75 mm dia bore PVC (SWR) bends any radius, complete all as specified and directed.
S&F 75 mm dia PVC (SWR) vent cowl, complete all as specified and directed.
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel in cement concrete 1:2:4 type B-1 smooth finished, and reforming benhing as required for 150mm bore complete all as specified and as directed.
M & L for providing RCC nominal mixType B1 1:1 1/2:3 (20mm graded crushed stone aggregate) in foundations, including rafts,footings, foundation beams, plinth beams, bases of columns and similar work complete all as specified and as directed.
M & L for providing RCC nominal mixType B1 1:1 1/2:3 (20mm graded crushed stone aggregate) in columns, pillars, piers, post and struts etc complete all as specified and as directed.
M & L for providing RCC nominal mixType B1 1:1 1/2:3 (20mm graded crushed stone aggregate) in Beams, cantilevers,and lintels and chajja etc complete all as specified and as directed.
M & L for providing RCC nominal mixType B1 1:1 1/2:3 (20mm graded crushed stone aggregate) in Slab supported in walls beams and columns in roof ,Landing, balconies, deck slabs and in shelves and similar work complete all as specified and as directed.
M&L 3 coats of white wash on ceilings on newly plastered prepared surface complete all as specified and directed.
M&L for joint free glazed ceramic coloured tiles 350x 250x 7mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surfaces over and including 10mm thick backing coat in cement mortar 1:4 such as skirting dado etc including circular cutting or notching and waste etc complete all as specified and directed by the Engr-in- Charge.
M&L for 3 coats of white wash on newly plastered wall and prepared surface complete all as specified and directed.
Material and labour for point wiring with 1.5 Sqmm copper conductor (Multi-standard) PVC insulated and unsheathed electric cable 1100 volts concealed in wall/roof in and including PVC conduit of size 20mm and above (as per conductor run )with all fittings/ accessories and including PVC insulated and unsheathed electric cable 1100 volts1.5 Sqmm ( multi-stranded) copper conductor single core( Green co lour) cable as continuous earth wire connected to common earth dolly including 50 mm deep box made of 2nd class hard board of required size and shape etc covered with 3 mm thick plastic laminated sheet ( Make Hylum) for one light point independent controlled by one, one way switch complete all as specified and as directed by the Engineer-in-Charge.
All as per item No 100 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge.
All as per item No 100 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.
All as per serial item No 100 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge.
Supply and fixing switch piano flush button single pole one way 5 Amps complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing socket outlet multipurpose 2 pin and 3 pin, 5 Amp, flush type complete all as specified and as directed by the Engineer-in-Charge.
Supply and fixing switch socket combination multi purpose 2 in 1, 3 pin 5 Amp and 15 Amp, flush type complete all as specified and as directed by Engr-in-charge.
Supply and fixing angular lamp holder, metal cased body of brass with back plate including 09Watt LED Bulb in batten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge
Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge.
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size..
Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete
S&F LED flood light 70 watt 230 V AC outdoor type with thermal management in optics and equipped with IP 66 protection with impact and corrosion resistance complete with driver and lamp complete all as specified and as directed.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m including making opening of suitable size for fixing of exhaust fan
Supply and fixing sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 8 way with 200 Amps rated bus bar complete including wooden board of required size duly painted with matching colour paint acomplete all as specified and as directed by the Engr-in-Charge.
Supply and fixing SPN 10 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning.
Supply and fixing SPN 40 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning.
Supply and fixing SP 5 to 32 Amp rating 240V, 10KA 'B' curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning.
Earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron and steel earth wire protected by provision of GI light grade pipe 15 mm bore including provision of concrete pit made from PCC ( 1:2:4) type B-1 (using 20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angle iron 40 x 40 x 6 mm and handle of 6 mm dia MS bar made to shape, GI light grade 20 mm bore pipe for watering perforated at bottom, 1.50 metre long placed on top edge of earth plate, common salt & charcoal filling, with fixing arrangement , funnel, wire mesh and earth work in hard/dense soil , returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No 5 of SSR 2009 Part-I and connecting to MCBDB’s earth test point all as specified or indicated including testing on completion .
Supply, laying, testing and commissioning of LT UG cable XLPE insulated PVC sheathed galvanized steel strip armoured electric power cable with stranded aluminium conductor 1100 volts grade 10 sq mm 2 core confirming to IS:7098 (Part-I), suitable for earthed system, laid in duct/trench/along pole/wall etc including nuts, bolts, washers, saddles & screws etc and making connection, complete all as directed. Note : 1. The cost of Al thimbles/lugs and cable gland etc is included in quoted rate and no extra payment will be made for it. 2. Excavation, earth work, sand cushioning and brick protection will be measured and paid separately under respective items.
Material and labour for un-reinforced pre-cast concrete cable covers, class LV type-1, flat size 250mm x 150mm x 40mm thick complete all as specified.
Sand cushioning to under ground electric cable all as per clause No 19.75 of MES SSR Part-I (2009)
S&F of galvanized iron pipe of 50 mm nominal dia light grade fixed to poles with clamps nuts, bolts and washers or laid under road crossing or fixed to wall including painting with two coats of aluminium paint over a coat of red oxide paint, complete all as specified and directed. Note : The cost of MS clamp, nut, bolt, washer and GI fittings etc shall be inclusive in the item rate.
M/S TASHI PHUNCHOK GOVT CONTRACTOR
Takshos Enterprises
M/S MA CONSTRUCTION Co
M/S MOHD MUSSA
M/S ASGAR ALI TIMBER SHOP
M/S BHAT ENGINEERS
M/S MOHD KARIM
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .