REPAIR / REPLACEMENT OF INTERNAL ELECTRIFICATION AND ITS CONNECTED WORKS AT CERTAIN MD ACCN UNDER AGE EM (S) OF GE (SOUTH) SECUNDERABAD

Amount

Taking down existing unserviceable point wiring of any type/ size of light/fan/power/two way/bell etc on TW batten/conduit including removal of batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site area complete all as specified and as directed

Taking down existing unserviceable light fittings,security light fittings,bulk head fittings,fall ceiling light fittings etc. from any height of building complete all as specified and as directed

Taking down existing unserviceable MCB's/MCCB's / Distribution boards any capacity complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. for one light point controlled by one switch complete all as specified and as directed Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 4 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator complete all as specified and as directed

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the independent board complete all as specified and as directed

All as per Sl item No 4 above, but for One 5 Amps socket outlet point on the same board complete all as specified and as directed

All as per Sl item No. 4 here in before, but for One Bell point controlled by one, bell push complete all as specified and as directed

All as per Sl item No 4 above but for One light point controlled by two way switch complete all as specified and as directed

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded ,copper conductor FRLS cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade , ISI marked , 20 mm bore with conduit accessories for Concealled wiring mount on wall or fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness including modular cover frame & box of suitable size for modular switch boards/sockets/regulators of any size modules for housing modular switches, sockets, fan regulators etc and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light point controlled by one switch complete all as specified and as directed Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No 10 above but for One ceiling fan/exhaust fan point controlled by one switch through modular regulator complete all as specified and as directed

All as per Sl item No. 10 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent modular board .

All as per Sl item No. 10 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on the same modular board.

All as per Sl item No. 10 here in before, but for One Bell point controlled by one, one way modular switch 5 amps, SP complete all as specified and as directed

All as per Sl item No. 10 here in before, but for One light point controlled by two 2 - w a y modular s w i t c h 5 amps, SP complete all as specified and as directed

M & L for Point wiring complete with two runs of 2.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new non-metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint flush to wall for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw ,cup washer etc. complete concealed in walls and provn of 2.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc for one light point controlled by one switch complete all as specified and as directed Note (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth. (2) The cost of cutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor.

All as per Sl item No. 16 here in before, but for using 4 Sqmm single core copper conductor cable of multistranded PVC insulated sheathed FRLS 1100 Volts grade for 3 Pin 15 Amps switch socket combination point on independent board including running of 4 Sq mm copper conductor PVC insulated cable as earth continuity conductor

M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLS cable of 1100V grade drawn through and including new PVC casing caping, ISI marked, including provision of fabricated branded pressed steel terminal box of suitable sizes with 1.6mm thickness duly painted inner and outer side by anti corrosive paint for housing the switches, sockets, fan regulators etc and covered with 3mm thick plastic laminated sheet cover with cadmium plated screw, cup washer etc. complete concealed in walls and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point and fan point controlled by one switch. Note: The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth.

All as per Sl item No.18 here in before, but for One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board complete all as specified and as directed

All as per Sl item No.18 here in before, but for One 3 pin 5 Amps switch socket outlet same board complete all as specified and as directed

All as per Sl item No.18 here in before, but for One Bell point controlled by one, bell push complete all as specified and as directed

All as per Sl item No.18 here in before, but for One light point controlled by two 2 - w a y s w i t c h 5 amps, SP complete all as specified and as directed

All as per Sl item No .18 Above but point wiring of 2.5 Sqmm complete all as specified and as directed

S & F switch piano single pole flush type 5 amps, 230 volts. complete all as specified and as directed complete all as specified and as directed

S & F switch piano single pole flush type 15 amps, 230 volts.complete all as specified and as directed

S & F single pole Modular switch 1 way 6 Amps, 1 Module complete all as specified and as directed

S & F single pole Modular switch 1 way 16 Amps, 1 Module complete all as specified and as directed

S & F Switch piano two way flush type 5 Amps capacity 230 volts complete all as specified and as directed

S & F Modular switch 2 way 6 Amps, 1 Module complete all as specified and as directed

S & F bell push 5 A flush type complete all as specified and as directed

S & F Modular Bell Push 6A, 1 Module complete all as specified and as directed

S & F Socket modular type multipurpose 2/3 Pin, 6 amps, 230 volts 2 Module complete all as specified and as directed

S & F Socket modular type multipurpose 3/6 Pin, 6/16 amps, 230 volts 2 Module complete all as specified and as directed

S & F Socket flush type multipurpose 2 in 1, 3 Pin, 5 amps, 230 volts complete all as specified and as directed

S & F Socket flush type multipurpose 2 in 1, 3/6 Pin, 5/15 amps, 230 volts complete all as specified and as directed

S & F Switch socket combination flush type multipurpose 2/3 pin 5 amps 2 in 1 230 Volts complete all as specified and as directed

S & F Switch socket combination 5 in 1 multipurpose 3/5 pin 5/15 amps flush typewith complete all as specified and as directed

S & F Modular ceiling fan regulator stepped socket size, 2 module suitable to work on 230 volts complete all as specified and as directed

S & F hot and cold PVC connection pipe 60CM length 120 degrees centigrade temperature suitable for geysers 15/25/50 ltrs complete all as specified and as directed

S & F Electronic type fan regulator stepped socket type, suitable to work on 230 volts complete all as specified and as directed

S&F bell (buzzer/ding dong) working on 230 volts AC Supply complete all as specified and as directed

S & F lamp holder any angle suitable for LED Bulbs of capacity 7/10/12 watts insulated body surface bakelite with back plate suitable for angle / batten fittings complete all as specified and as directed

Supply and Fix in replacement of LED Batten light 4 feet long capacity not less than 20 Watts with alumium housing , integrated electronic driver, rated life not less than 50000 burning Hrs complete all as specified and as directed

Supply and Fix in replacement of LED Batten light 2 feet long capacity not less than 10 Watts with alumium housing , integrated electronic driver, rated life not less than 50000 burning Hrs complete all as specified and as directed

Material and Labour for fix in replacement of Electric water heater,storage type steel body with copper inner tank and heating element not less than 2 kw capacity 25 Ltrs, BEE 5 star rated complete with all accessories such as safety valve, thermostat,NRV, Connection pipe etc. The rate quoted deemed to be Inclusive of taking down of existing unserviceable geyser/accessories and deposited at MES store yard complete all as specified and as directed

S & F In replacement of old unserviceable bulk head light fittings with new LED bulk head ip 65 with prismatic diffuser 1x10 Watt white complete with all accessories internally prewired and incl connecting up three core single wire complete all as specified and as directed

Supply & fix in replacement of Exhaust fan metal body of capacity 300 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector.The rate quoted deemed to be Inclusive of taking down of existing unserviceable Exhaust fan and deposited at MES store yard complete all as specified and as directed .

S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 60 W as light source complete with LED capacity not less than 60 Watts including brackets made out of GI pipe 25 mm dia light grade pipe bent to shape incl 02 Nos MS flate clamps incl nut bolts connection complete all as specified and directed .

Supply & fix in replacement of Exhaust fan metal body with out louvers of capacity 200/225/250 mm sweep and connecting up with PVC insulated copper conductor multistranded cable of suitable size and specification as provided by the manufacturer/company from ceiling rose to connector complete The rate quoted deemed to be Inclusive of taking down of existing unserviceable Exhaust fan and deposited at MES store yard complete all as specified and as directed

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) The rate quoted deemed to be Inclusive of taking down of existing unserviceable ceiling fan and deposited at MES store yard complete all as specified and as directed

S & F MCB SP 6 to 32 Amps 240 volts C type with rupturing capacity 10 KA compete all as specified and as directed

S & F MCB SPN 40 to 63 Amps 240 volts C type with rupturing capacity 10 KA compete all as specified and as directed

S & F MCB TPN,63 Amps, rupturing capacity 10 KA 415 volts suitable for fixing in existing DB of any capacity complete all as specified and as directed .

S & F in replacement sheet metal enclosure MCB DB SPN 4 way with 100 amps rated aluminium bus bar 240 volts double door with locking system complete all as specified and as directed .

All as per Sl item No 54 here in before, but SPN 8 way DB complete all as specified and as directed .

All as per Sl item No 54, here in before but SPN 12 way DB complete all as specified and as directed .

S & F in replacement of TPN DB 4 way double door made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as specified and as directed

S & F Vertical loadline type TPN DB 4 way double door with incoming as MCCB TP 415 volts AC 3 phase 50 Hz with fixed magnetic setting for current rating of 63 Amps 16 KA ,4P made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed .

S & F Single pole and Neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps (AC Box) complete all as specified and as directed

S&F Modular sheet metal enclosure single and neutral with two three pin socket & plug complete with one single pole MCB 20 Amps Capcity 10KA

S&F MCCBs 415V, 16KA, 100 amps 4 Pole suitable for DB including removing the existing unserviceable one complete all as specified and as directed

All as per Sl item No 63 here in before, but 63 Amps, 10 KA complete all as specified and as directed

M & L Submain concealed wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed Note:- (1) The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth (2) The cost of cutting of chases of required width and depth for conduit incl plastering ,painting two coats to match the existing wall colour is deemed to be included in the rate quoted rate. (3) The corresponding runs of copper wire and one run of suitable size of PVC conduit / casing caping shall be measured as one running meter.

All as per Item Sl No-63 above but using 3 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-63 above but using 5 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-63 above but using 5 runs of single core 10 sqmm using 32 mm dia PVC conduit.

M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including PVC Casing & Caping and its accessories including one run of single core 4 sqmm PVC insulated sheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and as directed Note:- (1) The wiring shall be done in proper color coding using red,yellow,blue for phases , black for neutral and green for earth (2) The cost of cutting of chases of required width and depth for conduit incl plastering ,painting two coats to match the existing wall colour is deemed to be included in the rate quoted rate. (3) The corresponding runs of copper wire and one run of suitable size of PVC conduit / casing caping shall be measured as one running meter.

All as per Item Sl No-67 above but using 3 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-67 above but using 5 runs of single core 6 sqmm complete all as specified and as directed

All as per Item Sl No-67 above but using 5 runs of single core 10 sqmm using 32 mm dia PVC casing caping.

Taking down carefully geysers from site of any make and capacity, transporting to MES complaint cell for dismantling the same for inspection, taking out all unserviceable and burnt spare parts, de-scaling and cleaning of tank thoroughly with washing compound or liquid solution, applying one coat of milky white synthetic enamel paint with sprayer after preparation of surface, writing work as per existing pattern with black synthetic enamel paint and re-fixing of geysers at its original position complete all as specified and directed. Note : (a) Spare part shall be measured and paid separately under respective item of this schedule, however minor items which are not catered in this schedule, the cost of the same shall be deemed to be included in the unit rate of these items. (b) Repair works will be carried out at workshop E&M complaint cell. (c) Repair of geyser shall be completed and re-fixed the same with in 72 Hrs after receipt of complaint slip. (d) The cost of transportation to workshop and back is deemed to be included in the quoted rate of this item.

M & L for repairs to copper inner tank, like denting, soldering, brazing, leak testing and reassembling of any Ltrs capacity water heater (Geyser) complete all as specified and as directed

Supply and replace Geyser element 2000 watts /1500watts of any type (Circular OR tringular) or as per site requirement complete all as specified and as directed

Supply and replace Thermostat suitable for existing geyser of any make all as directed.

Supply and replace Indicator bulb 230 V suitable for any make and colour all as directed.

S &F Bib taps chromium plated with crutch or butter fly handle 15 mm dia screwed for iron pipe or for brass ferrule and fixed including cutting of GI pipecomplete all as specified and as directed

Supply and fixing in replacement inner tank, ISI marked made of stainless steel suitable for 25 Litters capacity geyser complete all as specified and directed.

Supply and fixing PVC insulated round copper wire 3 core 2.5 Sqmm for making connection from storage geyser to industrial / power socket complete including removal of existing old damaged wire complete all as specified and as directed

Supply and fix Plug Top 3 pin 15 Amps for storage geyser including removal of existing plug top complete all as specified and as directed Make- Anchor, Havells, cona.

S & F Industrial type Plug top 3 pin, 20 Amps suitable for industrial socket for storage geyser including taking down old UNSV / rusted complete all as specified and as directed

Taking down ceiling fans of any type and size after disconnecting from existing ceiling rose to connector and clamp hooks and transportation to MES Complaint Cell, cleaning externally, dismantling and examining the rotor, startor, bearings, bushes, winding etc; for serviceability and repairing/replacing the defective parts subsequently oiling, greasing, assembling, testing for proper functioning, checking for safety security and proper locking, transporting back to building/site from work shop, hanging at its original position and connecting electrical connections, testing for noise free smooth running etc complete all as specified and as directed

Taking out defective/burnt out windings of ceiling fans of various makes of size 1200 mm sweep working on 230/250 volt single phase AC supply and re-winding with supper enamelled new copper wire of appropriate gauge including varnishing with good quality varnish' baking up, reassembling the fan, testing including replacement of connector, flexible wire of size 23/0.0040 three core up to one metre complete all as specified and as directed Note :- Ceiling fans which have Re-winded shall be in guarentee period for one year, any defect noticed during defect libiality period shall be repaired and cost for the repair shall be borne by the contractor.

Taking down old unserviceable rusted ceiling fan blades and providing new ceiling fan blades with fixing new screws as appropriate shape and size suitable for ceiling fan of any make and size 1200mm sweep complete all as specified and as directed.

supply and fix in replacement new metallic clamps (minium 03 mm thick), rubber bush, nut bolt, washer and cotter pin and for various types of ceiling fans to complete the repair work complete all as specified and as directed

M & L for painting of ceiling fans along with blades of any make/model of size upto 1400mm sweep with spray paint white in colour supper enameled paint, writing MES No in 20mm letter size with black paint etc complete all as specified and as directed Note :- Painting work shall be carried out at site, contractor / his supervisor shall make necessary arrangement for spray painting at users site

Taking out defective/worn out Ball Bearing of any make and supply and fix new bearing suitable for various makes of ceiling fans of size 1200 to 1400mm sweep. Make: SKF/NBC/TATA.

Taking out defective capacitor and supply and fix new capacitor of 2.5 mfd of approved make with holding clamp for various makes of ceiling fans complete all as specified and as directed Make:-Epcos/Bhel/Universal

All as per Item Sl No- 87 above but 3.15 mfd complete all as specified and as directed

Taking out worn out Gun metal bush and supply and fix new Gun metal bush for various makes of ceiling fans of size 1200 to 1400mm sweep. (as per sample) complete all as specified and as directed

Taking down Canopy as approved suitable for Ceiling Fan of any sweep and make complete all as specified and as directed

Taking out defective/burnt winding of exhaust fans of various makes of size180 to 350 mm sweep working on 230 to 250 Volt, single phase, AC supply, and rewinding with supper enameled new copper wire of appropriate gauge including varnishing with good quality varnish baking up, reassembling the fan, testing, transportation, replacement of connector, flexible copper wire of size 23/0.0040 three core up to one metre complete all as specified and as directed

Taking out defective capacitor and supply and fix new capacitor of 4.0 mfd of approved make with holding clamp for various makes of ceiling fans complete all as specified and as directed

S&F in replacement of ceiling fan downrod of required height including drilling of holes and threads of dia 15 mm as per the site requirement complete all as specified and as directed

S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and as directed

Supply and replace PVC rectangular box (Gang box) with 5 Amps switch socket complete all as specified and as directed

Supply and replace PVC rectangular box (Gang box) with 5/15 Amps switch socket all as direted by Engineer-in-charge.

Supply and fix/lay GI pipe 15 mm dia med grade for protection of earth continuity conductor complete all as specified and as directed

Supply and replace Plug top 5 Amps 3 pin 250 Volts complete all as specified and as directed

Supply and replace PVC Dummy sheets circular type of 4" complete all as specified and as directed

Supply and replace PVC Dummy sheets circular type of 6" complete all as specified and as directed

S & F in replacement LED Bulb of capacity not less than 12 watts ,5 star rated,life not less than 25000 Burning hours complete all as specified and as directed

M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of andings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed conduit wiring, etc., making good and matching with the existing colour, cutting not exc 10 cm girth complete all as specified and as directed .

Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GI earth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion all as specified (Note: GI pipe 15mm dia & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate).

M & L for replacement of Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4mm dia galvanised iron or steel wire complete all as specified and as directed

S & F twin core flexible twisted copper conductor wire 1.1 KV for Phase (Red) and neutral (Black) of size 0.5 Sqmm for connecting light/switch /socket etc. as per site requirement including taking down old unserviceable one complete all as specified and as directed

SRI SAI RAM ENTERPRISES (BID ID -3162237)

vvcenterprises (BID ID -3162259)

THE DECAN ENGINEERING AND REFRIGERATION COMPANY (BID ID -3159453)

BHATNAGAR ASSOCIATES (BID ID -3162564)

M/S ROORKEE ENGINEERING (BID ID -3162758)

COSMO ELECTRICALS (BID ID -3161125)

L and S ENTERPRISES (BID ID -3162483)

PARDEEP AND CO (BID ID -3162908)

M/s G.CHAKRAPANI AND SONS (BID ID -3162593)