Up-gradation of Construction work of Balance work of Compound Wall around OHT 1,3,4 and 5, Two No. RCC Culvert 4.70 Span on road R11 and R12 in Ph-II.

Amount

Demolishing lime concrete manually/by mechanical means and disposal of material within 50 meters lead 1:3:6 or richer mix.

Dismantling old plaster or shirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead.

Earthwork in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and bottom ramming and lift upto 1.5 mtr including getting out the excavated earth and disposal of surplus excavated earth within a lead of 50 mtrs from cutting edge: All kinds of soil.

Earthwork in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 mtr in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and bottom ramming and lift upto 1.5 mtr including getting out the excavated earth and disposal of surplus excavated earth within a lead of 1 mtrs from cutting edge: All kinds of soil

Hiring of welding set including labour charges and material charges (subject to actual)

Hiring of D.G set for welding of joints (shifting charges only) subject to actual Plugging of Leakages in 150 mm Dia G.I Pipe (medium class)

Diesel for running of D.G set.(subject to actual)Plugging of Leakages in 150 mm Dia G.I Pipe (medium class)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering (all works up to plinth level) in 1:5:10(1 cement:5 coarse sand 10 graded stone aggregate 40mm nominal size).

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1:4:8 ( 1 Cement: 4 fine sand: 8 graded stone aggregate 40mm nominal size) Crushed.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centering and shuttering (all works up to plinth level) in 1:3:6 (1 cement: 3 coarse sand 6 graded stone aggregate 20 mm nominal size).

Providing and laying in position specified grade of reinforced cement concrete)including curing but excluding the cost of centering and shuttering, finishing and reinforcement. All works upto plinth level.1:1.5:3 (1 cement: 1.5 coarse sand: 3 graded stone aggregate 20mm nominal size.

Providing & fixing exterior vitrified ceramic wall tiles thickness to be specified by the manufacture of Ist quality conforming to IS: 13755 of SOMANY, KAJARIA brand in all colours and shades laid on 20mm thick bed of cement mortor 1:4( 1 cement : 4 coarse sand) pointing the joints with matching pigment including the cost of centering, shuttering cost of chemical adhes including carriages of material complete job.

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and sturts, etc, upto floor five level excluding cost of centering, shuttering, finishing and reinforcement. 1:1.5:3 ( 1 Cement: 1.5 cosrse sand : 3 graded crushed stone aggregate 20mm nominal size.)

Providing & Laying Damp-Proof course 40mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse Sand : 4 graded stone aggregate 20mm nominal size) Crushed

Brick work with common burnt clay F.P.S (non – modular) bricks of class designation 75 in foundation and plinth in Cement Mortar 1:6 (1 Cement : 6 coarse sand)

Brick work with common burnt clay F.P.S (non – modular) bricks of class designation 75 in foundation and plinth in Cement Mortar 1:4 (1 Cement : 4 fine sand)

Extra for brick work in superstructure above floor V level for each four floors or part thereof. (By manual means)

Extra for tile bricks masonry with tile bricks of class designation 100 in square or rectangular pillars.Balance work of Compound Wall Around OHT 1,3,4 & 5

Half brick masonry with bricks of class designation 75 in foundations and plinth in cement mortar 1:4 (1 Cement : 4 Coarse sand)

Extra for half brick masonry in superstructure above plinth level upto floor five level

Steel Reinforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars.

Tile brick masonry with tile bricks of class designation 100 in foundations and plinth in cement Mortar 1:6 ( 1 Cement : 6 Coarse sand)

Extra for tile bricks masonry with tile bricks of class designation 100 in superstructure from plinth level upto floor five level.

12 mm Cement Plaster of mix 1:6

12 mm Cement plaster on the rough side of single or half brick wall of mix 1:6 ( 1 Cement : 6 fine sand)

12 mm cement plaster of mix 1:4 (1cement : 4 coarse sand).

Finishing walls with water proofing cement paint of required shade New work (two or more coats) applied

Applying primary coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanized iron/steel works

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work.

Cement Concrete Flooring 1:2:4 finished with floating coat of neat cement including cement & curing complete (50mm).

Providing and fixing aluminum door, window, ventilator shutters and portions (Complete Job)

Centering and shuttering including strutting, propping etc. and removal of form for :

Foundations, footing, bases of columns etc. for mass concrete.

Columns, Pillars, Piers, Abutments, Posts and Struts.

Suspended floors, roofs, landings, Balconies and access platform etc.

Edges of slabs and breaks in floors and walls. under 20cms wide

Applying one coat of water thinable cement primer of approved brand and manufacture on wall surface. Water thinable cement primer.

Carriage of materials by Mechanical Transport including loading, unloading and stacking;-

Sand for a lead of 23 km

Stone agg. below 40mm nominal size, stone agg. 40mm nominal size and above for 23 kms

Brick for a lead of 5 Km.

Tiles Bricks for 5 Km

Carriage of Steel

Shifting of Mega Sign Board with help of 2 Nos. of Hydra of required capacity:

Hiring plumber for repair work:

Providing & fixing switches boards 6 modular complete with fittings

Steel work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc, as required in gratings, frames, guard bar, ladders, railings, brackets, gates & similar works etc.

Supply at site angle iron posts & struts of required size including bottom to be split and bent at right angle in opposite direction for 10cm length and drilling holes upto 10mm dia etc. complete 1.20m high welded steel wire fabric fencing with 1.8m

Providing and fixing with barbed wire fencing three horizontal line inter woven with horizontal wire 9.38 Kg/100 mtr etc.

Providing and fixing G.I chain link fabric fencing of required width in mesh size 50×50 mm including straightening with 2mm dia wire or nuts, bolts & washers etc.

Removing white or colour wash by scrapping and sand papering the surface smooth including necessary repairs to scratches etc. complete.

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade (on old work)

Lettering with black Japan paint of approved brand

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade with two or more coats on new work.

Distempering with dry distemper of approved brand & manufacture ( two or more coats)

Finishing wall with water proofing cement paint of required shade (two or more coats)

Providing & fixing wire guage shutter using galvanized M.S wire guage for doors, windows & clerestory windows with ISI marked butt hinges etc.Second class kail wood 35mm thick:

Renewing glass pans with wooden fillets wherever necessary with float glass 4mm:-

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade on old steel work:

Applying priming coat with ready mixed red oxide chromate primer of approved brand & manufacture on steel galvanized iron/ steel work.

Painting on G.S sheets with synthetic enamel paint of approved brand & manufacture of required colour to give an even shade on new work (two or more coats)

Dismantling W.C. pan of all sizes including of disposal of dismantling material etc.

Providing & fixing white vitreous W.C pan Orissa patterns of size 580×440 mm

Providing and placing on terrace (all level) PVC water storage tank ISI 12701 with cover and suitable locking arrangement and necessary holes for inlet/outlet and over flows pipe but without fitting and base support.

Making plinth protection 50mm thick of cement concrete 1:3:6 over 75mm bed of dry 40mm nominal size wall rammed and consolidated etc.

Providing & fixing ist quality ceramic glazed wall tiles conforming to IS: 15622 in sterling, rises and dados over bed of 12mm cement mortar 1:3 etc.

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. layers not exceeding 20cm depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m.

Dismantling of flexible pavement (bituminous courses) by mechanical means and disposal of dismantled material upto a lead of kilometer, as per direction of Engineer-in-charge

Providing and Laying non-pressure (NP2) class (light duty) R.C.C pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 Cement : 2 fine sand) including testing of joints etc. complete 250 mm dia RCC Pipe.

Appurtenances for Gravity Sewers:- Construction of brick masonry circular/rectangular type manholes 0.91m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 ( 1 cement : 4 coarse sand), in side cement plaster 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat and neat cement, foundation concrete 1:3:6 mix ( 1 cement:3 coarse sand:6 graded stone aggregate 40mm nominal size), and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design. 0.91 m deep with S.F.R.C cover and frame (heavy duty, HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182 kg, fixed in cement concrete 1:2:4 ( 1 cement : 2 Coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests and 12mm thick cement plaster at the external surface shall be paid for separately.) With F.P.S bricks with class designation 75 & with crushed stone aggregate.900 mm dia with average depth upto 1.50 m

Open timbering in trenches including strutting and shoring complete (measurements to be taken of the face area timbered):

Depth exceeding 1.5 m but not exceeding 3 Mtr

Depth: 3.0m To 4.50 m

Providing MS footrest including fixing in M.H with 20×20×10 cm Cement concrete block 1:3:6 as standard specified with 20mm dia round bar (Complete job as specified)

Removal of unserviceable soil from the site and disposal as per direction of E in C:

Providing and fixing G.I. Pipes complete with G.I. fittings excluding trenching and refilling etc. (external work). (Prakash Surya, Jindal make)

100 mm dia

50 mm dia

Provision of welding work in distribution system for fabrication of bends etc.50 mm dia

Providing and Fixing of G.I. Unions 50mm dia

Providing and Fixing of gun metal gate valve. 50 mm dia:

Providing and Fixing of G.I. Plugs 50 mm dia:

Making connection of G.I. distribution branch with G.I. main etc.50 to 80 mm

Supply of 7.5 HP ×4000GPH × 85 mtr (H) submersible Pump set (Kirloskar/KSB make) with 65 mm sanction head

M/S RADHA KRISHAN GOVT CONTRACTOR

Vivek Gupta

RAJESH SINGH

Praj Construction