Repair/Renovation and Upgradation of Existing Community hall of V.P Taleigao (Main Hall, Buffet Hall and Open Lawn area) in ward No. 8 V.P. Taleigao Tiswadi Goa

Amount

Floor polishing on masonry or concrete floors with superior quality wax polish of approved brand and manufacture.

FALSE CEILING:- Providing & fixing False Ceiling Yashashri make or equivalent, made out of 2” x 1” M.S sq tube frame support structure & 20mm x 155mm x 1.2mm multi-cavity upvc section, 30mm x 40mm x 2mm Upvc multi-cavity section with hidden screwing system. The average weight of False Ceiling is 8.50 kg per sq mtr. These Upvc sections are tested by using BS 2782 & DIN 53459 test methods.

Demolishing laterite stone masonry in cement mortar including stacking of serviceable material & disposal of unserviceable material within 50 mts. lead.

Dismantling the tile work in floors and roofs laid in cement including stacking of materials within 50 meters lead for thickness of tiles 10mm to 25mm.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) (Square Hollow Section (SHS) IS4923 /Rectangular Hollow Section (RHS) IS4923/ Circular Hollow Section (CHS) IS1161 closed Structural Steel of (SAIL, TATA. VIZAG, JSW ,APOLLO Steel Ltd.) make (Min Yeild Stress 310 Mpa)) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Providing and laying finolex roof covering with fittings on existing battens as directed by Engineer in charge E .PCV corrugated sheet - 2.0 mm thick.

Providing and applying 2 coats of Anti-corrosive, chemically resistant coal tar extended epoxy coating system for below & above waterline application (Normal Wet & Underwater Application) (EPCO-2020-TX) having an adhesion of minimum 3.0 N/mm2 (ASTM-D-4541) and a DFT of 300-350 microns in 2 coats and having excellent chemical resistance against acids, alkalies and salts. Incl. cost of transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent.

Kotah stone slab flooring over 20 mm (average) thick base laid over & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & complete with base of lime mortar 1:1:1 (1 lime putty : 1 surkhi : 1 coarse sand)

Centering & shuttering including Strutting, Propping & removal of forms for lintel Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels plinth beams not exceeding 1m in depth

Providing and laying in position (1:11/2:3) Reinforced cement conrete excluding the cost of centering, shuttering, finishing and reinfrocement (1 cement: 1½ coarse sand:3 graded stone agg 20mm nominal size) In walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and structs etc. upto floor five level

Providing TMT steel reinforcement bars of (SAIL, TATA. VIZAG, JSW Steel Ltd.) ) (Confirming to IS 1786 of 1986) for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors along with the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member.

Providing woodwork in frames of doors, windows, clerestory windows trusses & other frames wrought framed and fixed in positon.A.First class Indian teak wood

Providing and fixing 38 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including black enamelled iron butt hinges with necessary screws:A)Second class Indian teak wood

Providing FRP door shutters 35mm thick with frame size in clear opening of 0.75x2.10m hinges and screws complete.,

Varnishing (two or more coats) with copal varnish of approved brand and manufacture on new work including an under coat Bees waxing on wood work with local made wax polish in proportion of 2:1 5:1 0.5 (2 wax: 1.5 linseed oil: A)With glue sizing

Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) including disposal of excavated earth lead upto 50 m and lift upto 1.5m disposed earth to be leveled and neatly dressed including providing barricading, danger lighting guarding as directed in :A ALL KIND OF SOIL

Rubble packing with hard laterite stone under floors including watering ramming and consolidating etc. in pipeline trenches and other foundations complete.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand: 4 graded granitic or basaltic stone aggregate 40 m nominal size) excluding cost of centering, shuttering and finishing :ALL WORKS UPTO PLINTH

Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation and basement.

Centering & shuttering including Strutting, Propping & removal of forms for xiiiSuspended floors, roofs landings, shelves & their supports

18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) and top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with sponge.

Painting three or more coats with acryllic exterior paint of approved brand and manufacture (such as weather shield,APEX) including applying one coat of cement primer and one coat of surface treatment etc. complete.

Refilling the pipeline/foundation trenches plinth sides, foundation etc. with available excavated earth in layers not exceeding 20 cm depth consolidating each layer ramming and watering lead upto 50 M and all lifts and disposal of surplus earth as directed by Engineer in Charge.

Providing and laying in design & pattern factory made Interlocking Cement Concrete paver blocks of M35/M40 strength, thickness & size/shape, made by table vibratory method using Rubber mould, laid in required colour & pattern over 50mm thick compacted bed of fine sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with river/manufactured sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand in footpath, parks, lawns, drive ways or light traffic parking etc. complete as per manufacturer’s specifications & direction of Engineer. (b)100mm thick -Coloured other than Grey (M35 grade)

Providing and fixing prefabricated compound gate of G.I. pipes 40 – 50 mm dia (medium) with 12mm M.S. square bars of G.I. pipes grill work as per drawing including providing & fixing locking arrangements, pintals, hold fast embedded in cement concrete 1:2:4 (1 cement: 2 coarse sand : 4 granitic or basaltic aggreate 20mm nominal size) including applying priming coat with ready mixed red lead paint and painting 2 or more coats with superior ready mixed paint of approved brand and manufacture in all shades as per direction complete.

Providing and fixing coloured ceramic tiles spartek or equivalent of 8" x 8" size and 6 mm thick in skirting and dados on 12 thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 x 260 x 350 mm and 340 x 430 x 265 mm sizes respectively with pvc automatic flushing cistern with fittings, R.S. or C.I. brackets, standard size galvanised steel flush pipe and spreaders with brass unions & G.I. clamps complete, including painting of cister and fittings, cutting and making good the walls and floors where required. One urinal basin with 5 litres p .v .c. automatic flushing cistern15597

Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps C.P. brass chain with rubber plug 32 mm C.P. brass waste of pattern, 32 mm diameter M.I. or C.P. brass trap and union complete, including cutting and making good the walls where required.Flat back wash basin size 630 x 450mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of the Engineer-in-charge. Internal work exposed on wall (Medium duty SDR 13.5 pipe).e.40 mm outer dia CPVC pipe547

Providing and placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark and conforming to I S 12701; 1996.c1000 ltr

Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws and washers.

Proving and fixing white vitreous china water closet squatting pan (Indian type w.c. pan) size 580 mm with 100 mm sand cast iron P. or S trap 10 litres high level P.V.C. flushing cister (of approved make) with fittings, rack bolts 32 mm diameter P.V.C telescopic flush pipe with fit tings and clamps 25mm P.V.C. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete cutting and making good the walls and floors where required. Long pan pattern W. C. Pan7355

Proving and fixing white vitreous china water closet squating (European type w.c. pan) with seat and lid, C.P. brass hinges and rubber buffers 10 lts. High level P.V.C.. flushing cistern (of approved make ) with fittings, rack bolts 32 mm diameter P.V.C. telescopic flush pipe with fit tings and clamps 25mm P.V.C.. over flow pipe with specials & mosquito proof coupling of approved municipal design and nylon. chain and pull complete, cutting and making good the walls ad floors where required. W.C. pan with white plastic seat and lid.7925

Providing and fixing C.P. brass shower rose with 15 or 20 mm. Inlet: 100 mm diameter.361

Proving and fixing kitchen sink with R.S. or C.I. brackets C.P. brass chain with rubber plug 40 mm C.P. brass waste and 40mm M.I. or C.P. brass trap necessary unions complete, including painting the fittings, cutting and making good the walls where required. White vitreous china sink size 600 x 450 x 200 mm6754

Providing & fixing liquid soap container with C. P. brass lid and brackets fixed to wooden cleats with C. P. brass screwsglass container 2061

Providing and fixing in position S.S. hand rail in main stair case, and landing as per approved design shown in the drawing including bending handrail pipe to proper shape in curves with specials, etc. complete.

Supply of ceiling suspended ductable units comprising of scroll compressor, air-cooled condenser coils with anti-corrosion coating, condenser fans, mounting frame, vibration isolators, etc. all enclosed in powder coated housing and operating in conjunction with Indoor unit connected with copper pipes using eco friendly refrigerant R410 including necessary internal wiring. (BLUE STAR) 11.0 TR DX UNIT NON INVERTER DUCTABLE.

Supply of ceiling suspended ductable units comprising of scroll compressor, air-cooled condenser coils with anti-corrosion coating, condenser fans, mounting frame, vibration isolators, etc. all enclosed in powder coated housing and operating in conjunction with Indoor unit connected with copper pipes using eco friendly refrigerant R410 including necessary internal wiring. (BLUE STAR) 11.0 TR DX UNIT INVERTER DUCTABLE.

Supply of ceiling suspended ductable units comprising of scroll compressor, air-cooled condenser coils with anti-corrosion coating, condenser fans, mounting frame, vibration isolators, etc. all enclosed in powder coated housing and operating in conjunction with Indoor unit connected with copper pipes using eco friendly refrigerant R410 including necessary internal wiring. (BLUE STAR) 8.5 TR DX UNIT DUCTABLE.(ODU)

ITC of DX-UNIT Installation, Testing and Commissioning of Ceiling suspended ductable unit. 11.0TR

SITC of Piping & Cabling DX Refrigerant Piping with Rubber Nitrile insulation Refrigerant piping of copper tubes/piping,with necessary clamps, supports, bends, elbows, reducers, U-bends, oil return & expansion loops, flare nuts /adaptors/any brass fittings, tee connections etc.with insulation

DX Control Cabling 6c x 2.5 sq mm shielded cable DUCTING / AIR DISTRIBUTION.

Supply, delivery, Installation & testing of Galvanised Sheet (GI) Ducting with Angle/TDF flanges with 22 G.

10mm Accaustic insulation inside the duct.

Supply air eye ball eye ball diffuser.

Return air grill.

Controll damper for air balancing.

Canvass connection.

Drain Piping covered with 9 mm insulation 32 mm PVC Drain Piping

Miscellaneous fittings and accessories Gas Charging

Supply and installation of MS structural stand for DX ODU and IDU units.

Unloading, Lifting & Shifting charges of all the ODUs & IDU etc.

B- LOW SIDE STAGE AREA DX-UNIT Dismental .

Installation, Testing and Commissioning of Ceiling suspended ductable unit. 8.5.TR

SITC of Piping & Cabling DX Refrigerant Piping with Rubber Nitrile insulation Refrigerant piping of copper tubes/piping,with necessary clamps, supports, bends, elbows, reducers, U-bends, oil return & expansion loops, flare nuts /adaptors/any brass fittings, tee connections etc.with insulation

DX Control Cabling 6c x 2.5 sq mm shielded cable

DUCTING / AIR DISTRIBUTION. Supply, delivery, Installation & testing of Galvanised Sheet (GI) Ducting with Angle/TDF flanges with Duct modification grill cleaning dampers

Change of Canvass connection

Miscellaneous fittings and accessories Gas Charging

Unloading, Lifting & Shifting charges of all the ODUs & IDU etc.

Supply of ceiling suspended ductable units comprising of scroll compressor, air-cooled condenser coils with anti-corrosion coating, condenser fans, mounting frame, vibration isolators, etc. all enclosed in powder coated housing and operating in conjunction with Indoor unit connected with copper pipes using eco friendly refrigerant R410 including necessary internal wiring.11.0 TR -Non-Inverter Ducted.

ITC of DX-UNITInstallation, Testing and Commissioning of Ceiling suspended ductable unit. 11.0 TR DUCTABLE

SITC of Piping & Cabling DX Refrigerant Piping with Rubber Nitrile insulation Refrigerant piping of copper tubes/piping,with necessary clamps, supports, bends, elbows, reducers, U-bends, oil return & expansion loops, flare nuts /adaptors/any brass fittings, tee connections etc.with insulation 11/8-5/8

DX Control Cabling 6c x 2.5 sq mm shielded cable

Air distribution product Sheet Metal Work 120 GSM Rectangular Ducting with threaded rods and supports G.I. Ducts 22G

Duct Insulation Acoustic Insulation with Nitrile Rubber Insulation 13mm Armasound for Ducting

Air distribution product Supply air Eye ball diffuser.

Return air Grill

Collar Damper

Canvass connection

Drain Piping covered with 9 mm insulation 32 mm PVC Drain Piping

Miscellaneous fittings and accessories Gas Charging

Supply and installation of MS structural stand for DX ODU&IDU units ALL FABRICATION WORK,

Unloading, Lifting & Shifting charges of all the ODUs & IDUs (Lifting Shifting)

Providing and Laying Acostic RIB Carpet WHITE colour to maintain Ambient temperature inside the AC Hall including GST

ALLUMINIUM WORKS Designing , Fabricating, Installing and fixing Aluminium Single Openable window in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Sliding Window in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Double Shutter Doors in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Single Shutter Doors in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Toilet Window in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Fix Window in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Curtain wall Glazing in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge

Designing , Fabricating, Installing and fixing Aluminium Double Shutter Door in accordance with the specification annexed in tender including transportation, scaffolding and handling etc. complete as per direction of the Engineer-in-charge