Providing and fixing of Dec...

Amount

Providing and fixing of Decorative Lights at Sadar Bazar from Post office to Masjid, under the Jurisdiction of Municipal Corporation Gurugram

Supply and erection of 2.5 sqmm 3 core unard FRLS PVC insulated ISI Marked copper conductor cable complete as per entire satisfication of engineer in charge.Make RR / Havells / Polycab/Grandley. 2.5 Sq. mm 3 Core Cable.

Providing trench less cuttting by Hydraulic Drilling Device boring/ Manual OR through some suitable alternate method with insertion of HDPE Pipe including supply, Delivery of HDPE pipe at work site and laying of 50mm internal diameter HDPE pipe inside road for road corssing of cable by Hydraulic Drilling Device without opening of the road top surface, laid at a depth of at least 900mm below the road surface from the feeding point to the feeder pillar box in median (OR) from feeder pillar to respective street light pole including cost of all accessories for road crossing for laying of cables..

Erection Testing and commissioning of Three phase CCMS panel petty material required for installation of ccms panel i.e clamp,nut and bolts,thimble ,wire etc complete in all material required for installation on PCC pole or Pedstal. complete in all material required for installation on PCC pole or Pedstal.

Providing and fixing of 4G/5G Sim Card and recharse fees per month for street lights CCMS panel Compelte in all respect required for proper operation of CCMS panel. 500 Nos x 60

Defect liablity period for Replacement of burnt/faulty cables of various sizes 10x2 core,16 X 2 Core,16x4 core and 25 X 4 core cable SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for 1st and 2nd year free of cost complete in all respect.

Defect liablity period for Replacement of burnt/faulty cables of various sizes 10x2 core,16 X 2 Core,16x4 core and 25 X 4 core cable SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for 3rd year @4% of capital cost

Defect liablity period for Replacement of burnt/faulty cables of various sizes 10x2 core,16 X 2 Core,16x4 core and 25 X 4 core cable SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for4th year @4% of capital cost

Defect liablity period for Replacement of burnt/faulty cables of various sizes 10x2 core,16 X 2 Core,16x4 core and 25 X 4 core cable SPMCB, EPMCB, contractor, wiring and other item required for CCMS panel and Installation of material supplied by the M/s Surya Co. as per rate contract term and Condition i.e SPMCB, EPMCB, contractor, wiring etc and other item required for CCMS panel and maintaining the connectivity of CCMS panel with the GMDA/other portal through sim and removing of fault in ccms panel for5th year @5% of capital cost

Supply and installation of a 5-meter (4 meters plus 1 meter) decorative pole along with a decorative bracket made from a combination of cast aluminum and pre-galvanized pipe. The pole features a decorative design in two sections with single-piece construction. The bottom section is 750mm in height with a base diameter of 460mm, gradually reducing to 415mm up to the top ring at 305mm, weighing no less than 25kg. The upper section is 600mm high, starting at a diameter of 170mm, expanding to 220mm in the center, and reducing again to 170mm, weighing no less than 10kg. Both sections are gravity die-cast. The pole includes a pre-galvanized segment of 4000mm with a thickness of 3.6mm, featuring a cast aluminum finial weighing no less than 2.5kg. It has arrangements for flower pots on both sides, each with a 600mm long overhang and a diameter of 32mm, backlit MCG, Khat Shyam Baba Ji logo, provision for a camera, and a V-shape stand provided at the upper section. The round base plate dimensions are 570mm x 12mm thick, weighing no less than 27kg. The pole is designed for mounting on a concrete pedestal with four foundation bolts measuring M16 x 450mm. An internal service window is provided in the lower casted base. The pole is duly primer coated and polyurethane painted with an antique finish in dual shades, followed by a final coat of PU paint with a dry film thickness not less than 90 microns. The pole is suitable for an ornamental single-arm bracket measuring 1000mm long with a 900mm overhang. The bracket is designed for an ornamental LED drop-down fixture. Fixture: Supply and installation of an ornamental 100W LED drop-down luminaire made of spun aluminum housing with dimensions not less than 625mm x 630mm, duly powder-coated and PU painted with a PC clear frosted diffuser for high illuminance glare lighting. High lumen LEDs mounted on pressure die-cast heat sinks, IP-66 protection powered by Phillips driver, and 10Kv external surge protection complete in all respects (design of pole, bracket, and light fitting as per approved drawing)

Bidder Name

Amount

THE ROHINI COOP L&C SOCIETY LTD. (GSTN-NA) BID ID -1319912

The Darba Kalan Shila Coop L/C Society Ltd. (GSTN-NA) BID ID -1319802

The Darba Kalan Shila Coop L/C Society Ltd. (BID ID -1319802)

The Darba Kalan Shila Coop L/C Society Ltd. (BID ID -1319802)