SPL REPAIR TO BLDG NO P73 BUTCHARY MD ACCN AND ROOFTREATMENT AND CONNECTED WORKS OF BLDG NO P22 AT COI AND COVERING OF DRAIN IN LUNGAR AREA IN AGE BRII UNDER GE DANAPUR CANTT

Amount

Demolition of cement concrete in ground floors and paving (un reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified and directed.

Dismantling of floor, walls, roof tiles including bedding but backing and rubbish off permises complete all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc

M & L for Post Antitearmite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete.

M & L for Post Antitearmite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in floors etc. set and joining in neat cement slurry and pointed in coloured cement to match with shade of tiles , including laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.18 sqm but not exc. 0.38 sqm in vertical surface such as skirtings, dados etc. set and joining in neat cement slurry and pointed in coloured cement to match with shade of tiles , including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exc. 0.06 sqm but not exc. 0.11 sqm in floors etc. set and joining in neat cement slurry and pointed in coloured cement to match with shade of tiles , including laid over 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base to receive floor finish complete all as specified and directed.

M&L machine cut kota stone slab flooring 20-25 mm thick in riser, step etc laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & rounding to edges over & incl 10 mm thick screed bed in CM (1:4) complete all as specified and directed.

M&L for glazed ceramics coloured tiles of size 450x300x 7mm thick in vertical surfaces such as on skirting/dados/wall, set and jointed in neat cement slurry and pointed in white or coloured cement to match the surfaces including 10mm thick rendering in cement mortar (1:4) complete all as specified and directed.

Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 in half brick thick wall complete all as specified and directed.

M & L PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation,sub base of floor mass concrete & cinder concrete etc complete all as specified and directed.

M&L 50 mm thick PCC 1:3:6 type C-1 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen 80/100 gde and three part of sand ( all by weight) complete all as specified and directed

M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate for insertion of hold fast incl necessary form work etc complete all as specified and directed.

M&L for providing precast cement concrete of RCC 1:2:4 type B-1 (using 20mm graded stone agg) for landings, chajjas, shelves, cover slab and similar articles with plain faces etc. with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match the shade set in CM 1:4 including necessary form work complete all as specified and directed.

Taking down cement plaster on wall / ceiling / roof etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L rendering 15 mm thick on fair faces of brick wall in cement mortar (1:6) finished surface even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and directed. Note : Liquid WPC will be measured and paid separately.

M&L rendering 5 mm thick in cement mortar (1:3) on ceiling finished surface even and smooth without using extra cement, complete all as specified and directed.

Supply only water proofing compound (liquid),ISI marked complete all as specified and directed.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutter from the frame) complete all as specified and directed.

All as per above item No 24.00 but exc 1.5 Sqm but n.exc. 4 Sqm each..

Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed.

Cutting holes in brick walls exc 1/2 brick & n exc full brick built in cement mortar for inserting hold fasts, cutting and preparation of brick wall for insertion of doors, windows & ventilator and making good dismantled portion in cement mortar 1:3 etc complete all as specified and directed..

S&F factory made 2nd class hard wood 35 mm thick glazed and gauzed skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and shutters as specified in SSR Part I, Section 8, clause 8.24 (a) complete all as specified and directed.

S&F 35mm thick 2nd class hardwood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particle board with commercial veneering on both faces , size of rail and stile as per IS:1003 (Part-I), Klin seasoned and chemically pressure treated all as per SSR complete all as specified and directed.

S & F 35 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowka complete all as specified and directed

S & F steel window with side hung shutters including projecting or box stype hinges with steel handle peg stay and divided into square with glazing bars dovetailed or welded, to receive glazing, or gauzing including one coat of primer including fixing of hold fast of size 25 x 5 mm flat iron etc complete all as specified and directed.

~Ditto~ All as per item No 31.00 above but without glazing bars complete all as specified and directed

S&F Steel ventilator with top hung shutter including, hinges, peg stay, complete all as spd and directed

M&L mild steel framed work such as grills, gates,stand for intricate design with ends of bars welding or forged into spikes including pintle hings stops hand made sliding bolts etc & similar work conforming to Fe-229-0 Gde E-165 complete all as specified and directed.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 105X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

S&F Pressed steel frame for door with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc of size 125X60 mm made out of 1.25mm thick MS sheet , complete all as specified and directed.

M&L PCC 1: 3: 6 type C-0 (using 12.50mm graded stone aggregate) as in back filling of pressed steel frames and similar work complete all as specified and directed.

S&F Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F 28 to 30 mm(stiles) Factory Made Solid PVC Moulded door shutter with particle board core , with 2, 3 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, in frame at site as per specification & drawings as given in SSR part - II (2010 print) on serial page No. 161 complete all as specified and directed.

SS&F 100 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and directed.

S&F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 75 mm complete all as spd and as directed.

S & F aluminium alloy anodised, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy size 300 mm large complete all as specified and directed.

S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed.

S&F 200 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 150 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 150 mm size ISI Marked complete all as specified and directed.

S&F Aluminium handles, cast type, anodized 100 mm size ISI Marked complete all as specified and directed.

S&F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor. complete as directed by Engr-in-charge

S&F small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including MS butt hinges, medium weight, cold rolled 50mm long, articles n exc 200 Cu cm each of Ist class soft wood complete all as specified and directed.

S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified.

Hacking out old boken glass (any thickness, size, quality or description) from wooden frames/steel frames glazed with oil putty or fixed with beads complete all as specified and directed..

S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed...

S & F 3 mm thick figured glass pin head type and glazing with oil putty in squares n exc 0.5 Sqm in each pane etc complete all as specified and directed...

S&F in repair 18/19 mm thick Block baords, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed

S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed

S&F CP Peg set of six powder coated as approved complete all as specified and directed.

S&F in repair mild steel conduit curtain rod with PVC coating fancy type curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

S&F mild steel Bracket and bulb with PVC coating fancy type for curtain rod 20 mm dia of any colour as approved complete all as specified and directed.

Taking up or down of 15 mm dia steel tubing and connections complete all as specified and directed .

Taking up or down of 20 mm dia steel tubing and connections complete all as specified and directed.

Supply & laying of CPVC pipes 20 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Supply & laying of CPVC pipes 25 mm Outer dia, SDR 11 & Plain CPVC SDR 11 fitting on wall/ceiling or laying in floors complete all as specified and directed.

Note for item No 63 & 64 (i) CPVC fittings with brass threading will be measured and paid separately under items No (ii) Cost of normal SDR CPVC fittings Like Bend, Tee, Elbow, Union etc shall inclusive under the quoted rate of pipe including.

S&F of CPVC 20 mm Outer dia Brass Elbow complete.

S&F of CPVC 20 mm Outer dia Brass Elbow (3/4 x 1/2) complete.

S&F of CPVC 20 mm Outer dia Brass Tee complete.

S&F of CPVC 20 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete.

S&F of CPVC 25 mm Outer dia male Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete.

S&F of CPVC 20 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/FBTA) complete.

S&F of CPVC 25 mm Outer dia female Brass threaded Adoptor (3/4 x 1/2) (MTA/MBTA) complete.

S&F of CPVC 20 mm Outer dia Brass Tank Adoptor complete.

S&F of CPVC 25 mm Outer dia Brass Tank Adoptor complete.

S&F of CPVC 20 mm Outer dia Brass Union complete.

S&F of CPVC 25 mm Outer dia Brass Union complete.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S&F in repair chromium plated single lever wall mixer with connecting legs and wall flange complete all as specified and directed.

S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etc complete all as specified and directed.

S&F in repair vitreous china squating pan 'Orissa' pattern WC size 580x440 mm white with integral foot rest and trap and including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor all as spd.

S&F in repair PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection with CP brass nuts on both sides complete all as specified and directed .

S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed.

S & F as in repair 15 mm dia bib taps chromium plated cast copper alloy fancy type, long shank with capstan head screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repair 15mm dia pillar taps, cast copper alloy, with capstan heads, chromium plated , screwed down high pressure, with or without lettered ‘hot’ or ‘cold’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.

S&F CP towel rail, 20mm dia, D type,60cm long complete all as approved complete all as specified and directed.

S & F as in repair 15 mm dia angle cock, chromium plated, cast copper alloy, fancy type, screwed down high pressure with capstan head screwed both ends for iron pipe or for union complete all as specified and directed.

S&F Corner glass shelf 300mm (with brass brackets) including fixing arrangements complete. Make-Prayag or equivalent (Cat No BEA-44) complete all as specified and directed.

S&F in repair of stainless steel soap dish, of standard size and shape complete all as specified and directed.

S&F in repairs sinks with drainge board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.

S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 900 x 750 x 220 mm size fixing with wooden plug with suitable size of screws complete all as specified and directed.

S & F in repair brass chromium plated shower rose fancy type with swivel joints ,125 mm dia with CP arms 300 mm long including fixing to steel pipe or union complete all as specifiedand directed.

S&F PVC (SWR) 'P' trap for 110 mm dia etc complete all as specifiedand directed..

M&L for RCC as in kitchen platform, shelves & chajjas etc type B1 1:2:4 (20 mm graded aggregate) including necessary form work complete. complete all as specified and directed.

M&L for 18 to 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

S&F TMT bars 8 mm dia and over cut to lengths, bent to shape required including cranking bending hooking ends etc and binding with mild steel annealed wire not less than 0.9 mm dia conf to IS-432 complete all as specified and directed.

Taking down PVC/AC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100/75 mm dia pipe complete all as specified and directed.

S&F110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with brackets etc complete all as specified and directed.

S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed.

~Ditto~ all as per item No 99 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) pipes 50mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete all as specified and directed..

S&F clamp made out of 50x5 mm flat iron, 16mm dia round iron stays including bolts & nuts and securing ends of stays to wall or roof for 110mm PVC pipe complete

S&F PVC (SWR) bend/shoes any radius of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius With access door of 110 mm dia complete all as specified and directed.

M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed

S&F PVC (SWR) bends any radius provided with access door of 75 mm dia complete all as specified and directed.

S&F PVC (SWR) branch pieces, single (equal or un equal) , ordinary or inverted (spigot or socket type) or with parralled branches of 110 mm dia with access door complete all as specified and directed.

~Ditto~ all as per item No 107.00 above but 75 mm bore complete all as specified and directed.

S&F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S&F PVC (SWR) nahani/ floor trap, plain with grating with or without waste hole including jointing with solvent cement 75mm dia etc complete

S&F PVC (SWR) multi floor trap with grating including jointing with solvent cement 75 mm dia etc complete.

Dismantling water tanks of capacity exc 250 and n exc 500 ltrs complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layered hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity including CP tank nipple complete all as specified and directed.

S&F Ball valves 20mm dia high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S & F in repair 20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed.

M & L for preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Removing of old paints by paint remover or burning off by blow lamps and cleaning with scrapers, any number of coats,any width or girth complete all as specified and directed.

M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and directed.

M&L for applying two coats of oil bound distemper on wall over a coat of primer on prepared surfaces complete all as specified and directed.

M&L for applying 2mm thick Birla / JK Putty in two layers on old ceiling surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and directed.

M & L for preparation of newly plastered surfaces of ceiling and applying 2 mm thick wall care putty including preparation of new surface complete all as specified and directed

M&L for applying two coats of oil bound distemper on ceiling over a coat of primer on prepared surfaces complete all as specified and directed.

M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed

M & L for preparation of old surfaces of ceiling and applying two coats of white wash complete all as specified and directed.

M&L preparation of new plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed .

M&L Preparing old painted surfaces of walls, chajjas etc by washing rubbing down and stopping and applying two coat of cement base paint white or tinted complete all as specified as directed.

M&L for two coats of weather coat paint over a coat of primer on new surfaces on wall including preparation of newly plastered surfaces complete all as specified and as directed by Engr-in-Charge.

Taking down roofing/Terrazo/Tiles of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd.

M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed,

M&L 10 mm thick screed bed mixed with water proofing compound at 200ml/per beg of cement on roof surfaces/concrete surface in CM 1:4 complete all as specified as directed. Note : WPC shall be measured separately under appropriate item

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm. (iv) Laying unrolled over the bitumen coat surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. (v) Applying a coat of aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. NOTE:- The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed.

Demolition of concrete of any description and in any position not otherwise specifically provided for complete.

Preparing surface of sunken slab and applying 15 mm thick cement plaster 1:4 cement sand mortar with integral water proofing compound both on floor and wall. The surface shall then be cured and allowed to dry then applying Epoxy Resin coating polymer modified cementitious coating like brush bond of Fosroc, Pidilite and Bostic as per manufacturer's instructions both on floor as well as on wall and sunken floor shall be filled with graded cinder complete all as specified.(IWPC will be paid separately)

M&L PCC type C2, 1:3:6 (40 mm graded aggregate) as in sunken slab filling complete all as spd and as directed

M&L for vitrified heavy duty (dura stone) tiles 300x300x9 to 10 mm thick in floor, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for cleaning steel wire brushing and rust remover and (reebaklens solution) to exposed corroded reinforcement @ 0.20 Ltr/Sqm of exposed reinforcement bars/structural members surfaces at any height and applying minimum 40 micron thick (dry film thickness) coat of epoxy zinc rich primer (Nitozink primer of M/s Fosroc chemicals (India) Pvt Ltd/ M/s Choksey chemicals @ not less than 0.25 litre per sqm of exposed steel reinforcement at any height and providing rendering 10 mm thick cement & sand mortar 1:3 using liquid water proofing compound Nitobond AR not less than 2% by weight of cement of M/s Fosroc / M/s Pidilite / M/s Choksey chemicals, at any height including scaffolding, complete all as per manufacturers instructions and all as specified and directed.

M&L for providing precast cement concrete louvres and jallies type B-0 1:2:4 (12.5 mm graded aggregate) 40mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.

M&L Providing precast cement concrete type B-1, 1:2:4 (20 mm graded aggregate) in frame work for louvres & jallies, window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone wallin) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match complete all as specified and directed.

S & F of aluminium composite panel Ex-1 Grade Aludecor Make for overall 4mm thick Aluminium composite panel for external wall cladding the panel consisting of 3mm thick thermoplastic core of sandwich between "TRUE GAUGE" 2 skins of 0.5 mm thick aluminium sheet making a Total Panel Thickness (0.5 mm + 3.00 mm + 0.5 mm) 4mm thickness aluminium composite panel materials with 2 coats of metallic finish of approved colour with KYNAR 500 based coatings on top sides. PVDF coating 25 to 32 microns thickness with 10 years guarantee. The PVDF coating shall confirm to Specification of ECCA/AMMA and conforming to mechanical properties of panel as per detailed technical specification using main frame of vertical and horizontals made out specially designed extruded 38x38x2 mm thick "L" aluminium sections & 50x25x1.5 mm aluminium Tube section withtray system to withstand wind pressure of 150 kg/sqm and fabricated fixed at all levels. Elevation and heights. Extruded section shall be of 6063 alloy or BSH9 conforming to IS-63400. Rate shall include to fix the main frame into masonary wall/RCC concrete surface with necessary items fixed Anti Corrosive Resistant 50x50x3 mm thick MS angle. CI coated Anchor Fasteners, Galvanised bolt nuts and washer screws and aluminium rivets and other hardware's materials and using Dow corning weather Sealant 789 and 12 mm thick backer Rod to ensure water and air tightness. complete all as specified and directed.

S & F for rolled mild steel structural steel work as in trusses in (tubular/rectangular/square) including purlins, rafter, special shaped washer etc. complete using any dia of MS pipe medium grade/angle or using ERW or induction butt welded tubes/angles conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed.

S & F powder coated aluminium door shutter (Double or Single leaf) with following specification:- (a) chowkhat frame of size 101.60 x 44.45 x3.18 mm @ 2.683 Kg/RM (b) Style/Vertical member of size 47.62 x 44.45 x 1.90 mm @ 0.991 KG/RM (c) Top and Middle rail of size 47.62 x 44.45 x 1.90 mm @ 0.991 KG/RM (d) Bottom Rail of size 104.00 x 44.45 x 1.80 mm @ 1.60 KG/RM (e) Partialy 9mm thick prelaminated particle board both side decorative (f) Partialy 5 mm thick tinted glass. (g) Aluminum and ruber gasket beading as per requirment as in fixing for paticle board & Glass. (h) Two No.Disk Type Aluminium handle 200 mm long in each shutter. (j) One No. Mortice lock 6 leaver and joing cleat.

S & F powder coated aluminium window sliding shutter three track with following specification:- (a) chowkhat frame of size 92 x 31.75 x2.00 mm @ 2.04Kg/RM (b) Style/Vertical member of size 39 x 20 x 1.00 mm @ 0.342Kg/RM (c) Top and bottom rail of size 39 x 20 x 1.00 mm @ 0.342Kg/RM (d) Partialy 0.63 mm dia stainless steel wire netting mosquito proof with fixing arrangment. (e) Partialy 5.00 mm thick tinted glass fixing with rubber gasket. (f) Aluminum and PVC beading as per requirment as in fixing for paticle board & Glass, joing cleat including locking arrangement as required etc

Taking down aluminium doors shutters only (area exc 1.0 sqm but not exc 3.0 sqm each) and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beads & cleats of existing make and also refixing the handles & mortice locks in existing position with and including new screws including refixing the door shutters in same opening complete all as specified & directed.

S&F in repair 9 mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination complete for all as specified and directed

S&F in repair 5.5 mm thick ordinary sheet glass panes of size exc 0.5 sqm in each pane fixed with cleats, glazing clips complete all as specified.

S&F in repair Disk type aluminium handle 200mm long on aluminium door shutters complete all as specified and directed.

M & L for double action floor spring for aluminium doors hydraulically regulated made up of minimum 1.5 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including necessary cutting & making good to floor as per existing complete all as specified and directed. Make:- Amar/Kelvin

S&F in repair door closer hydraulically regulated, aluminium (extruded section) body, designation No.2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified & directed.

S&F in repair CP mortice door lock 4 to 6 lever suitable to door shutter complete all as specified and directed.

Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed.

S & F for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mm complete all as specified and directed

S & F for hangers 6 mm dia GI (upto 1200mm length adjusting level fixed to roof/slabs by means of ceiling cleats made out of GI flat 40X30 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified and directed

M & L for 6 mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber / GI / Aluminium framework with screws complete all as specified and directed.

S&F in repair Solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing.

M&L 15 mm thick rendering on other than fair faces of brick /concrete surfaces in CM (1:6), finished even and smooth (without using extra cement ) complete all as specified and directed

M&L Preparing old painted surfaces of walls, pillars etc by washing rubbing down and stopping and applying one coat of cement base paint white or tinted complete all as specified as directed.

Taking down carefully copper / aluminium point wiring (light, fan, switch, socket or power, Bell & Two way point) complete with fitting such as switches, sockets, ceiling rose, sketch light fittings etc, and making good the disturbed surface of walls and floors etc complete all as specified and directed.

Taking down carefully main switches DB's/ MCB DB's with MCB and making good the disturbed surfaces of walls complete all as specified and directed.

Taking down carefully copper / aluminium sub main wiring including teak wood batten / conduit and making good the disturbed surface of walls complete all as specified and directed.

M&L Point wiring complete with cable PVC, insulated, unsheathed, 1100 volts grade conforming to IS-694, 1.5 Sq mm (nominal area) FRLS stranded with copper conductor single core drawn through and including non metallic rigid PVC conduit 20mm dia,medium grade and conduit accessories concealed wiring systeb by cutting of wall and making good in walls disturbed surface, with sunken type pressed steel/welded MS terminal boxes not less than 1.6mm thick MS Sheet concealed in wall with hold fasts duly painted with two coat of black bituminious paint over a coat of red oxide, 3 mm thick laminated sheet cover for mounting of fittings like switches, socket outlets, regulators etc., including a run of PVC insulated unsheathed 1.5 Sq mm FRLS copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed for the following: -

One light/ fan point controlled by one, one-way switch, SP, 5 Amps complete all as specified & directed.

One light point controlled by one, two-way switch, SP, 5 Amps complete all as specified & directed.

One bell / buzzer point controlled by one push button complete all as specified & directed

One 5 pin 5 Amps switch socket out let point on controlled by one switch on same board with other switches complete all as specified & directed

One switch socket outlet, 5 pin, 5 Amps, SP, on independent board complete all as specified & directed.

~Ditto~ All as per item No. 164.00 above but with 2.5 Sq mm cable for One 3 Pin, 15/16 Amps switch socket outlet on independent board complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 5 amps, 240 Volts complete all as specified and directed.

Supply and fixing socket outlet flush type 5 Amps, 5 pin, 240 Volts complete all as specified and directed.

Supply and fixing switch piano flush button single pole one way 15 Amp 240 volt complete all as specified and directed.

Supply and fixing socket outlet flush type multipurpose 2 in 1, 3 pin 5 and 15 Amp, 240 volts complete all as specified and directed.

S & F for Switch Piano type 2 way switch 5 amp, 230 Volts complete all as specified and directed at site.

Supply and fixing bell push single pole, 6 Amps, 240 Volts, flush type complete all as specified and directed.

S&F ceiling rose surface bakelite 65 x 50 mm, two to three terminals, complete all as specified & directed.

Supply and fixing for batten/angular fittings complete all as specified and directed.

S&F LED lamp 7/8 watt complete all as specified and directed.

S&F electronic Fan regulator 450 watt step type complete all as specified and directed.

S&F Bell multi music type AC 240 Volts,single pole complete all as specified and directed.

Supply and fixing double door TPN DBs four way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral & DB's will be fitted concealed in wall / surface as per site required complete all as specified and directed .Make: Schneider/ Legrand/ L&T / ABB.

Supply and fixing double door SPN DBs eight way of powder coated DB's suitable for MCB's fitted with bus bar,Neutral link,Earth bar and Din ral as per existing finishing complete all as specified and directed .

Supply and fixing with MCB SPN 5 to 40 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB SP 240 volts 5 to 32 Amps, 10 KA breaking capacity, 'C' type including connection with suitable size aluminium / copper lugs complete all as specified and directed .

Supply and fixing MCB TPN 50 to 63 amps 10 KA ,C-series including connection with suitable size aluminium / copper lugs complete all as specified and directed .

S&F in LED tube light fitting batten type single tube 1x 18/20 watt 230 volt wall/ ceiling mounted luminaire industrial type made of sheet metal box type suitable for T- 8 tube complete with electric electronic driver and bipin holder including one no tube 18/20 watt fixed with wall/ceiling incl fittings accessories and connecting with all accessories internally pre wired and incl connecting up with twin core twisted flexible copper conductor cable suitable size all as specified. Make- Bajaj/Surya/ Havells / Crompton Greaves

Supply and fixing in repair Wall light fixture lantern made up of polycarbonate ; suitable for LED 9 watt, spiral B-22 base holder including connection with all necessary accessories complete all as specified and directed. Make:- Havells, Cat No.LHDLO2160099 / PHILIPS / BAJAJ

Supply and fixing LED bulk head 10 watt fittings environmental friendly ultra modern energy saving surface mounted decorataive bulk head fitting with driver and prewired and necessary electric connection with PVC insulated twin twisted flexible copper wire of size 0.75 Sqmm complete all as specified and as directed. Make: Havell's Cat No: HEXAFT10WLED857SSYMBOPC or equivalent model of Bajaj/CG.

Supply and fixing LED light fitting for bldg security lighting energy saving & environmental friendly long life versatile pressure die-cast housing with individual high power LED as light source and lens embedded PC cover of capacity 25 watt 240 volts AC 50 Hz , IK 07 and IP 66 protection suitable for 40 mm dia GI pipe bracket including three years on site warranty from manufacturer complete all as specified and directed. Make: Havells Cat No: ENDURAPEARLSL25WLED757SASYTOPCMP /CG/PHILIPS/BAJAJ

M & L for security wall light bracket made out of GI pipe light grade 25 mm dia 1.2 metre length bent to shape and reduced to required size at top upto 1.5 metre length by cutting, welding and well finishing including MS clamp of flat iron of size 40x6 suitable length 2 sets complete with drilling, hole, fixing with nuts bolts and washers including painted with two coats of aluminium paints over a coat of red oxide primer including dismantling one complete all as specified and as directed.

M&L for CPRI approved factory made sheet metal box made out of 2 mm thick MS sheet of size 900 X 600 X 300 mm with single door hinged shutter and locking arrangement for fixing DBs, KWH Metter etc flashed / grouting on wall incl painting with two coated of powder coated paint over a coat of red oxide primer with suitable glass vision panel of each meters shall be provided in the door to easy meters reading , including taking down the old one complete all as specified & directed. .

Taking down ceiling fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/ 0.193 from ceiling rose to fan terminal over hauling the fan complete all as specified and as directed.

Supply and fixing metal body air fan / ventilator with louver 230 mm sweep and grouting with nut , bolts & Fastenar on the wall and make good the disturbed surface and electric connection with 1.5 Sqmm three core PVC insulated round flexible copper conductor and sheathed cable upto ceiling rose complete all as specified and directed .Make: HAVELLS Cat No-Ventil Air - DS

M&L for Sub main wiring two single core PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in but excluding non metallic rigid PVC conduit including PVC insulated unsheathed 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly complete.

M&L for Rigid non metallic PVC conduit ISI marked, medium grade, inclusive of all fitting such as tees,bends. Junction boxes, elbows saddles. Pipe hooks,couples and lock outs etc 25 mm external dia, fixed on surface mounted complete and making good disturbed surfaces in repairs all as directed.

Earthing complete with galvanised steel earth plate electrode 600mm X 600 mm X6.30mm thick burried directly in ground (earth plate not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to and including GI earth lead of Gi wire 4 mm size by means of steel bolts,nuts, check nuts and washers, PCC 1:2:4 type B-1 in pit, angle iron 25X25X3mm frame work with precast RCC 1:2:4 type B-1 cover reinforced with 8mm dia TMT bars @ 150mm C/C both ways abd 12mm dia MS fabricated handle, medium grade GI watering pipe 20mm bore with funnel, wire mess and light grade GI protection pipe 40mm bore upto 5m lenght for drawing in earth lead ,salt,charcol etc. including excavation and earth work in any type of soil , removal of surplus soil to a distance not exceeding 50m complete all as shown in electrical plate No. 5 of MES schedule 2009 part-I and connected complete all as specified including testing on completion

Supply , laying & testing in repair for XLPE insulated, armoured, heavy duty electric cable with stranded aluminium conductor, 1100 volts grade, laid in trenches, sleeving through pipes or fixed on poles & walls or laid under floors including jointing with suitable size aluminium lugs complete of size 16 Sqmm nominal cross section x 4 core. Make of cable: Polycab/Havell's/Finolex/Grandlay

M & L for Excavating in trenches, in any type of soil not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation, etc or not exceeding 10 Sqm on plan and not exceeding 1.5m in depth for shafts, cesspits, manholes, pier holes, etc and getting out in any type of soil complete all as specified & directed.

M & L dry sand cushioning to underground cables with 8cm thick before laying of cables and 15cm thick after laying and stretching of cable and gentally hand ramming and consolidation of thickness of sand 18 cm all as specified and directed by Engr - in - Charge. Note :- Sand thickness shall be measured 18 cm only after punning of sand .

M&L for bricks cover of old size bricks sub class 'B' with width equal to the length of the brick laid dry & flet abutted with with each other with gap between adjacent bricks n.exc 10 mm over UG cable for protection complete all as specified & directed.

M & L for Returning, filling in excavated approved soil, including spreading, leveling, watering and well ramming in layers not exceeding 25cm each complete all as specified & directed.

Supply and fixing of GI tubing, light grade, 40 mm bore with all fitting lais in trenches / pole / wall for protection of cables in repairs complete all as specified & directed.

M & L for Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified & directed.

M/S SAROJ KUMAR SINGH

HARINANDAN RAI SONS

MS BIJAY KUMAR AND SONS

MS CHAKRAVARTY PRITHIVI RAJ

M/S Priya Trading Agency

M/S MODERN CONSTRUCTION

jaglalchoudharyandsons

Vijay Bakshi and Son