Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹18.1 LAccepted-AOC RZ 140 A EAST SAGARPUR STREET NO 7 8 NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L1 | Accepted-AOC Being L1 Bidder | |
| 2 | L2₹22.9 L+₹2.6 L (12.9%)Rejected-AOC | L2 | Rejected-AOC Not L1 Bidder |
Tender Value
₹26.3 L
EMD Value
₹52,500
Closing Date
16 May 2022, 6:00 pmClosed
GE U WATER SUPPLY DELHI CANTT 10
GE U WATER SUPPLY DELHI CANTT 10
PETTY REPAIR FOR ATTENDING DAY TO DAY EM EXTERNAL WATER COMPLAINTS AT RRRC AREA LORRY ROAD ARMY TRAINING AREA AND D K PART I AND ALLIED AREA IN THE AREA OF AGE U WS NO II UNDER GE U WATER SUPPLY DELHI CANTT 10
2022_MES_516322_2
8222/GE/WS/D-07/2022-23
Open Tender
Civil Works
Item Rate
330 days
GE U WATER SUPPLY DELHI CANTT 10
Please refer Tender documents.
5 documents required · 5 mandatory
₹500
GE U WATER SUPPLY DELHI CANTT 10
₹52,500
Yes
19 Dec 2022
26 Apr 2022
18 May 2022
26 Apr 2022
16 May 2022
4 May 2022
Amount
Labour only for attending day to day external/treated water supply complaints of all nature including grey water pipe leakage i.e leakage in water supply pipe lines , fitting/fixture, over flow of overhead tank, no water supply in supply tank/direct kitchen tap and grey water supply in graden area and AEPTA landscaping area of Golf Course. Taking out water from trenches during repair including note down the complaints in complaint register complete all as specified and as directed. (Any material required for attending complaints shall be measured and paid separately under respective item herein after) Note :- quoted rates include notes mentioned at srl No. 3 (i) to 3 (ix).
Labour only for attending of Electric supply compliants of day to day maintenace of existing LT Panels including connecting electrical accessories / spares of water supply installation and electrical fitting & light, short circuits in Pump house complete all as specified and as directed.(Any material required for attending complaints shall be measured & paid separately under respectvie item hereinafter) Note :- Quoted rates include notes mentioned at srl No. 3 (i) to 3 (ix)
Notes for item No. 1.00 & 2.00 (i) The complaints shall be attended and the defects shall be rectified by a team of expert and experienced electrician/plumber as applicable assisted with adequate No of helpers complete all as specified and as directed.
(ii) The complaints shall be attended and defect shall be rectified within 04 hrs commencing from date and time of notifying the complaint failing which a penalty @ Rs 250/- per complaint per day (08 hrs) shall be levied upon/imposed on the contractor and recovery shall be made from contractor's dues. Contractor shall appoint suitable staff for receive and register of complaints received in person/through telephone/mobile and issue and control contractors stores and be available wef 0800 hrs to 2000 Hrs to receive and notify the complained
(iii) In case, after checking and attending the defect, it is not possible to rectify the defects within 08 hrs the facts shall be brought to the notice of Engineer-in -charge by the contractor /his rep . If Engineer -in-charge is satisfied with contractors view, no recovery will be made.
(iv) while attending the complaint of water supply /Electric supply if earth work is required then the same shall be measured and paid seperately under appropriate item of Sch 'A' . However no extra payments shall be made for dewatering.
(v) Cutting of GI pipe in position and threading is also deemed to be included in the job rate (Fitting and fixtures will be measured and paid separetely under respective item of Sch A.
(vi) All T & P including safety gears required for attending the complaints shall be provided by the contracor.
(viii) The elecrician shall always be in possession of all Electrician tools , LT Megger, Earth tester , Multimeter , Crimping tool, insulation tape, Hand gloves etc required at site.
(ix) Old retrived materials, if any, will be the Contractor's property and necessary credit shall be offered by the contractor.
Supply only GI Socket mediumd grade ISI Marked of following sizes ;-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
80 mm bore
Supply only GI Elbow Med grade ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50mm bore
Supply only GI Union Med Grade ,ISI marked of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply only GI Nipple of different length as per requirement, both end screwed Medium Grade, ISI marked of following sizes:-
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
Supply only PVC 'L' type Holder suitable for Aluminium rod,Float Ball etc all as required at site and complete all as specified and as directed of following Sizes:-
15 mm bore
20 mm bore
25 mm bore
Supply only GI Reducing socket medium grade ISI marked of the following sizes :-
25 mmx15mm bore
20mmx15mm bore
25 mm x 20 mm bore
50 mmx 40mm bore
40 mmx 20mm bore
40 mmx 25mm bore
50mmx 25mm bore
80 mm x50/40/25mm bore
Supply only GI Tee Med grade ISI Marked of following sizes : -
15mm x15mm x15mm
20 mm x 20 mm x 15 mm
20 mm x 20 mm x 20 mm
25 mm x 25 mm x 25 mm
25 mm x 25 mm x 15 mm
25 mm x 25 mm x 20 mm
40 mm x 40 mm x 40 mm
40 mm x 40 mm x 20 mm
40 mm x 40 mm x 25 mm
50 mm x 50 mm x 50 mm
50 mm x 50 mm x 25 mm
50 mm x 50 mm x 20 mm
Supply only GI solid plug heavy duty ISI marked of following sizes
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply only Lead pig bar
Supply only spun yarn
Supply only lead wool
Supply only gland packing of any size
Supply only 3 mm thick rubber Gaskets suitable for any size of flanges upto 200 mm dia
Supply only PTMT float valve with epoxy coated aluminium rod and high density plastic ball of following sizes complete all as specified and as directed
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply only Gun metal air release valve, 25 mm bore as per IS complete all as specified and as directed
Supply only Tank Nipple suitable for HDPE water tank 20 mm dia
Supply only 15 mm bore Ball Valve of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and as directed
Supply only 20 mm bore Ball Valve of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and as directed
Supply only in replacement of old gun metal gate valves with iron wheel head screwed both ends for iron pipe , ISI marked , as per IS : 778 of following sizes complete all as specified and as directed
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Testing of drinking water collected from local source (bore wells /shallow wells in the area of AGE(U) W/S No.II and submission of detailed test report to the office of Engineer-in-Charge. (i) Carrying out minimum essential testing of water as per IS 10500-2012 mandatory for chemical colour, odour, taste, turbidity, pH value, TDS total hardness, iron, chloride, fluoride and residual free chlorine and Bacteriological total coliform organisms per 100 ml (MPN) and E Coli in 100 ml) with specific recommendation regarding suitability of water for drinking purposes. (ii) Collection of water from[ different sources of water ie. Sump, bore wells & shallow well in a sterilized bottle and testing in NABL Approved laboratory as mentioned in specification
Note 1:- Rate Quoted shall also deemed to be included for the followings:- (i) Cost of sterilized bottle as required. (ii) To and fro transportation charges for collection of samples from source (sump, bore & shallow wells) Note 2:- Test reports so collected will be submitted to the Engr-in-Charge every month and failing to which will attaract a penaly of ₹5000/- per report and will be recovered from his RARs/Bills
Excvation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep for pipe line in soft/loose soil, getting out and levelling of bottom surface to required complete all as specified and as directed.
Returning filling, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick complete all as specified and as directed.
Removing excavated material from site to a distance not exc 50 m away and depositing where directed not exc 1.5 meters above the starting point complete all as specified and as directed.
Surface dressing of uneven surfaces of the natural ground, rough excavated surfaces and filled area where ordered shall be trimed to an even surface horizontal or slopping, by removing vegetation and by scrapping high patches and filling low patches with the scrapping soil to given an even and neat look to the site. depth of cutting not exceeding 15 cm complete all as specified and as directed.
Supply only 15 mm bore Bib tap in replacement of old standard of PTMT any colour high pressure screwed for male/ female treaded, for UPVC pipe of size 15mm bore complete all as specified and as directed
Supply only of 20 mm bore Bib tap in replacement of old standard of PTMT any colour high pressure screwed for male/ female threaded, for UPVC pipe of size 20mm bore complete all as specified and as directed
Labour work required for taking out suction pipe 80 mm to 200 mm bore from sump of any capacity, dismantling of foot valve screwed / flanged type, and relowering after refixing in position the same duly cleaned / minor repair if any required such as replacement of rubber gasket/ lifting bolts & nuts including making thread for the suction pipes off sizes etc complete all as specified and as directed.
Supply only in replacement of old 'stem' made out from SS (all as per sample) of sluice valve of size as under : -
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply only in replacement of old 'stem nut' made out from stainless steel suitable to match with existing sluice valve of sizes as under : -
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply only in replacement of old worn out 'gland plate' made out CI, suitable to match with existing sluice valve of sizes as under : -
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Supply & Fixing in replacement of old rotational moulded Poly-ethylene water storage tanks (cylindrical vertical with closed top) of cap 500 Ltrs hoisted and fixed in position at building top.
Ditto, but capacity of 1000 Ltrs PVC water storage tank
Taking up or down steel tubing with connection including cleaning for removal complete all as specified and as directed of the follwing sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Relaying/refixing jointing and testing of old GI pipes including cleaning completely in trenches complete all as specified and as directed of following sizes :-
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply and fixing in replacement of old rusted/blocked/punctured GI pipe medium grade ISI marked including all fittings in old/new position as in walls and ceilling complete all as specified and as directed of following sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Supply and fixing of in replacement of old rusted/blocked/punctured GI pipe medium grade ISI marked including all fittings in old/new position as in trenches all asdirected of following sizes :-
15 mm dia
20 mm dia
25 mm dia
40 mm dia
50 mm dia
80 mm dia
Labour for cutting and screwing existing steel tubing for alteration or addition complete all as specified and as directed of the following sizes :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply only in replacement of old worn out/broken cast iron/ DI fitting for flanged /spigot and socketed pipes such as bends , reducer, tee pieces , tail pieces , collar, cross , caps & plug upto 150mm bore
Taking up or down old UNSV Cement pipe/Cast Iron/DI pipes with socket and spigot ends and putting/filling lead/tyton joints including burning out old lead joints and recovering lead complete all as specified and as directed for the following sizes
80 mm bore
100 mm bore
150 mm bore
200 mm bore / 300 mm /350 mm / 450 mm bore
Relaying /Refixing only in trenches old CI/DI pipes with socket and spigot ends, after cleaning thoroughly and removal of all blockages if any complete all as specifiedof pipe CI/DI pipes after cleaning from inside with suitable chemical and rodding complete all as specified and as directed of fwg dia :-
80 mm bore
100 mm bore
150 mm bore
200 mm bore / 300 mm /350 mm / 450 mm bore
Supplying ,laying ,jointing ,tesring and commissioning in replacement of old Cement pipe/ DI pipe as per IS 8239 class K-7 with in side cement mortar lining with spigot and socketed end laid in trenches complete with rubber gasket joint complete all as specified and as directed at site for the following sizes:-
80 mm bore
100 mm bore
150 mm bore
200 mm bore
Taking out of Old UPVC /HDPE pipes of any rating laid in trenches complete all as specified and as directed by Engr in charge.
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supply & Fixing in replacement of old Unplalsted PVC pipes of pressure rating 10 kgf/cm2 laid in trenches including taking up/down old pipe UPVC Pipe of any size
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Relaying of UPVC/HDPE pipes retrieved againt item No 44.00 of any type of following size
15mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Making connection of PP-R/UPVC/HDPE distribution branch with main of following sizes by providing and fixing tee including cutting and making fusion joint etc Note:- The contractor will arrange butt jointing machine and the rates quoted will include all to and from transportation cost.
Supply and fixing in replacement of old broken/brittled UPVC Socket ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
Supply and fixing in replacementy of old UPVC Elbow ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
Supply and fixing in replacementy of old UPVC Union ISI Marked of following sizes : -
15 mm bore
20 mm bore
25 mm bore
40mm bore
50mm bore
Supply and fixing in replacementy of old UPVC reducing socket ISI Marked of following sizes : -
25 x15 mm bore
20 x 15 mm bore
25 x 20 mm bore
50 x 40mm bore
Supply and fixing in replacementy of old for mild steel work for manhole cover, stair case steps made of MS angle/ flats/channels etc including cutting out top and bottom to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or rivetting etc and similar works confirming to Fe-290, Gde E-165 and applying two coats of synthetic enamel paint over a coat of red oxide primer including preperation after demolition of existing covers,steps etc complete all as specified and as directed.
Supply only SS made 25 mm to 150 mm long, 6 to 20 mm diameter Hexagonal nuts, bolts and washers/spring washers complete all as specified and as directed
Supply, fixing, jointing & testing Cast Iron Sluice Valve of sizes as under, ISI Marked, flanged ends drilled pressure rating PN-1.0 PD Short body, confirming to IS 14846-2000, having stainless steel spindle with cast iron operation wheel at top including taking out UNSV Sluice Valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
100 mm bore
150 mm bore
Supply, fixing, jointing & testing Cast Iron Non Return Valve without by pass arrangement, swing type confirming to IS 5312, flanged ends pressure reating PN1.0 complete including taking out unsv NRV complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
100 mm bore
150 mm bore
Supply, fixing, jointing & testing Cast Iron Foot Valve flanged ends, swing type operation with rubber sheet confirming to IS 4038 complete including taking out unsv Foot Valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
100 mm bore
150 mm bore
Supply, installation & testing of flanged ends Water Meter ISI marked woltman type, class 'B' of following sized and making good connection with flanged ends,with rubber sheet gasket and nuts & bolts fixing in horizontal/inclind/verticle position, including taking out UNSV water meter complete all as specified and as directed. type operation with rubber sheet confirming to IS 4038 complete including taking out unsv Foot Valve complete all as specified and as directed. Note:- Flanged joints complete with jointing material including replacement of SS Hexagonal nuts, bolts and washers of suitable size including replacement of flange gasket of suitable thickness shall deemed to be included in the units rate of this item
100 mm bore
150 mm bore
Material & Labour for painting on steel and iron surfaces with one coat of synthetic enamel paint as per existing colour scheme or pattern after preperation of old painted surface of any description over 10 cm in width or girth complete all as specified and as directed
Multipurposes grease lubricant for Motors and Pumps
Taking out existing LT UG XLPE cable laid in trenches/fixed to poles etc of following sizes Note : Earth work excavation will be measured and paid seperately under relevant items)
Crossectional area 25 Sqmm x 4 core
Crossectional area 35 Sqmm x 3.5 core
Crossectional area 50 Sqmm x 3.5 core
Crossectional area 70 Sqmm x 3.5 core
Relaying /relaying of old existing LT UG XLPE cable laid in trenches/fixed to poles same after connected repair works cable of following sizes Note : Earth work excavation will be measured and paid seperately under relevant items)
Crossectional area 25 Sqmm x 4 core
Crossectional area 35 Sqmm x 3.5 core
Crossectional area 50 Sqmm x 3.5 core
Crossectional area 70 Sqmm x 3.5 core
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 25 sqmm, 4 core complete all as specified and as directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 35 sqmm, 3.5 core complete all as specified and as directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 50 sqmm, 3.5 core complete all as specified and as directed
Supply and fixing in replacement of XLPE insulated, armoured heavy duty electric cables with aluminium conductor, 1100 volts grade, cross sectional area 70 sqmm, 3.5 core complete all as specified and as directed
Labour only for laying existing burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection complete all as specified and as directed
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 metre depth and getting out in hard/dense soil for taking out/laying cables complete all as specified and as directed Note:- This Excavation to be measured for UG Cable work only)
Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm in hard / dense soil all as specified and as directed Note:- (Returning & filling work to be measured for UG Cable work only)
Removing excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point all as specified and as directed Note:- (Removal of excavated soil to be measured for UG Cable work only)
Supply and spread clean dry river sand to required width at bottom and top for cable cushioning all as specified and as directed
Material and Labour Burnt bricks sub class 'B' old size laid in trenches with equal to length of bricks across the cable for cable protection all as specified and as directed
Repair/maintenance of juction box/pole box as per site including serviceable of bus bar, MCB & changing of cable or make it serviceable condition all as specified and directed.
Taking down the unserviceable electronic timer ST 100 and Supply &Fixing new elecrtonic timer type ST 100 for fixing in panel complete all as specified and as directed
Fixing only in replacement Automatic phase sequence corrector suitable for 25 HP to 100 HP with sheet metal enclousers and indicator lamp output/input, suitable for 3 phase electric Induction motors with Automatically protection against single phasing and sequencing voltages, unbalanced and low/high voltages with time delay. Note 1:- Necessary housing arrangement and hanging arrangements including proper connections as per manufacturers guidelines will be made with proper size of copper conductor with proper dressing (Note 2:- Phase sequance corrector will be supplied by the dept free for fixing Sch 'B')
Supply & fixing in replacement of Fully automatic Star-Delta Starter with sheet metal enclosure ML 1.5
Supply only in replacement of 3 pole power contactor Type MNX 25, 110 Amp ,415/220 volts ,50 hz coil voltage 415 volt
Supply only in replacement of 3 pole power contactor Type MNX 32, 110 Amp ,415/220 volts ,50 hz coil voltage 415 volt
Supply only in replacement of thermal over load relay type MN relay range 28-42 Amps
Supply only in replacement of thermal over load relay type MN relay range 20-32 Amps
Supply only in replacement of thermal over load relay type MN relay range 13-21 Amps
Supply and fixing in replacement LED batten arrow for multi application suitable for 18 watts with & including necessary cable connection to make it functional complete all as specified and as directed
Earthing complete with galvanised steel earth plate electrode 600 x 600 6 mm thick burried directly in ground not less than 2.25 mtr deep below normal ground level with top edge of earth plate not less than 1.5 mtr below normal ground level connected to the Galvanised iron strip 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanised iron and 32 x 6 mm GI strip procted by provision of GI light grade pipe 40 mm bore including provision of concrete pit in PCC 1: 2: 4 type B-1, using 20 mm graded stone aggregates with 40 mm thick cover of RCC (1:2:4) reinforced with XPM weight not less than 4 kg/sqm and 6 mm dia bar handle, excavation and earth work in any type of soil, charcoal dust and salt light grade GI watering pipe 20 mm bore with funnel and wire mashe and medium GI protection pipe 15 mm bore 5 Mtr long and GI strip upto main earthing of pole complete all as shown in electrical plate No 3 of MES Sch 2009 Part-I complete all as specified and as directed.
Note:- 1. Main Earthing strip from earth plate electrode to test point upto length of 7.t meters shall deemed to be included in the unit rate quoted against this items. 2. On testing after completion of the earthing work if the desired resistenance is not obtained, the contractor shall redo the the complete earth work without any extra cost to the department.
Taking down old unserviceable point wiring from existing conduit (light, fan, socket or power) complete such as switches, ceiling roses, pendent holder and socket etc and removing the material from site and making good the distrbed surface of wall/floor/ceiling etc complete all as specified and directed.
Material and labour for point wiring complete with 1.5 sqmm (nominal crossectional area) FRLS PVC insulated unsheathed and stranded copper conductor cable ISI marked and including PVC concealed conduit ISI marked of size 20 mm dia medium grade and PVC conduit fittings such as tees, bends, elbows, reducers except conduit junction box (Junction box will be of MS) including FRLS PVC insulated unsheathed 1.5 sqmm copper earth wire, connecting to common earth dolly and including metal flush box of suitable size for fixing modular switches/sockets/fan regulators etc complete all as directed for the following:- Note:- The cost of modular type Metal Boxes and modular accessories like cover plates will be included in quoted rates)
One light point/fan point/exhaust fan point/circulator fan point/bell/buzzer controlled by one 1 way switch/bell push etc.
One socket outlet point 5 Amps on the same board
One socket outlet point 5 Amps on the independent board
All as per item No 70.03 here-in-before but One 3 pin socket outlet 15 Amp, independent with 4 sqmm copper FRLS wire with 4 sqmm FRLS copper earth wire.
Supply & fixing in replacement of switch piano modular type, flush type single pole 1 way, 5/6 Apms complete all as specified and directed.
Supply and fixing in replacement of swithc Piano Modular flush type single pole 1 way 15 Amps complete all as specified and directed.
Supply and fixing in replacment of socket outlet 6 Amp 2 in 1,3 pin 6 Amps complete all as specified and directed.
Supply and fixing in replacment of socket outlet 16 Amp 2 in 1,6 and 16 Amps complete all as specified and directed.
Supply and fixing in replacement of Fan regulator step type 120 watts complete all as specified and directed.
Supply and fixing in replacement of Ceiling rose, surface bakelite, 3 terminal, 240 volts, 5 Apms with back plate of 3 mm thich bakalite laminated hylem sheet of appropriate size & MS Box of suitable size complete all as specified and directed.
Supply and fixing in replacement of MCB C curve type suitable for 240 Volts AC Single pole with over load and short circuit protection and rupturing capacity not less than 10kA all as specified and directed for 6 to 32 Amps capacity as per site requirement.
Supply and fixing in replacement of street light energy saving environmental friendly long life LED street light/Buldg security light made of pressure die cast alumiinium housing with high power LED 60 Watt as light source product description 60W5700K with WSPD code LHETBXU7PA7B060 IP 66.
Taking down old unserviceable street light fitting 45 W/60W/80W any make and replacement with new driver/LED lamp existing suitable make and model and make it functional complete all as specified and directed.
Supply and fixing in replacement of LED Uniflood with driver inside PDC housing light white, 70 Watts, 240 Volts Elegant and power savings
Supply and fixing in replacement Eco friendly LED lamps of 15/18 Watt capacity.
An amount of Rs 218874.50 shall be deducted from BOQ on account of schedule of credit
Ayushmat Contractors
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .