WBPWD/SE/SWEC/NIQ14/2026-27

PART-A : MATCHING WITH THE EXISTING SYSTEM & ALLIED EI WORK

Boring the hard metal road / culvert for installation of GI / PVC pipe by Horizontal Directional Drilling / boring machine as per requirement and drilling a pilot bore from the entry pit to a pre-determined exit location.as per direction of EIC. [ At various location throughout the complex of PSP ]

Supply of heavy gauge PVC Pipe ( make Supreme I PWD approved ) and the material grade is PE 80 with PN 10 category type pipe incl. necessary fittings for protection of cable as per direction of EIC [ After cutting the HARD METAL ROAD and mending good the damages the road with new one ]

110 mm dia (OD)

90 mm dia (OD)

50 mm dia (OD)

40 mm dia (OD)

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of 4 SWG on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. [ Connecting the same with existing system ]

Supplying & fixing of GI Loop box cover made of 16 SWG GI sheet and size of the cover is approx 500 mm x 125 mm as per existing cut out of Octagonal pole incl supply & fixing necessary allen screw nuts ,with locking arrangement etc to complete the job as per direction of EIC. [ for the existing poles ]

Supplying & fixing of 32/ 40 Amp rated 4 Way FRP / Bakelite Stud or Terminal ( Make - AC/DC or PWD Appvd .) incl S&F of 16 Amp rated Kitkat Fuse. and the Stud & Fuse are to be fixed on the top of 3 mm thk bakelite / Hylam sheet and the total are placed inside the loop box of Octagonal pole with necessary fixing arrangement at site & inter connection by suitable sizes copper wire to complete the job as per direction of EIC. [ for the existing poles ]

Supplying & fixing of Nut & bolts ( 2'' long x 10 mm dia ) with washer for fixing the Arm bracket at the top of Octagonal pole as per requirement and to complete the job as per direction of EIC . [ for the existing poles ]

Shifting & Carrying the old damaged Octagonal Poles , fittings Arm brackets etc with loading at site and unloading, sorting, stacking properly at the place as per direction upto a distance between from 3 km to 6 km . [ for the existing poles ]

Treatment of baseplates of existing old/damaged poles with the help of gas cutter & drill machine with the expert man power who are doing the same type of job and increase the hole upto 28 mm dia and uses the base foundation nut & bolt of M24 in size as per direction of EIC. [ for the existing poles as per direction ]

Foundation for installation of existing pole [ fixing at the centre of the road] for the Construction work of suitable foundation with 1:2:4 or RCC M20 grade concrete and considering the safe soil bearing capacity at site with civil work,total excavation & labour charges to last finishing with all materials ,Plastering works of 2mm thickness and foundation above structure after cleaning etc. total Erection work to setup the pole on RCC foundation with the help of modern engineering practices as specific tools & tackles, machineries,labour charges and Hydra/JCB/or Excavator with maintains all kind of safety by proper finishing the above work without any damages in original properties.and Earth work in excavation of foundation trenches with Depth of excavation required area with C/C foundation footing - 1000 mm x 1000 mm x 1700 mm , double jally with 12 mm with 1.0 Mtr x 1.0 Mtr x 1.85 Mtr height concreate base block ( 12 mm x 8 nos vertical tor rod , 16 nos and 150 space ring with 10 mm dia tor rod incl earth work filling in foundation trenches and Cement concrete with graded stone ballast shuttering in ground 900 mm and above ground 800 mm ) as per direction by EIC.[ For various location of PSP ]

Dismentling the Sub Distribution Board after disconnection of existing cables of both incoming & outgoing as specific tools & tackles, machineries,labour charges and Hydra/JCB with maintains all kind of safety and shifting incl carrying the old damaged Sub Distribution Board with loading at site and unloading, sorting, stacking properly and dismentalled boards deposited to Section store at the place as per direction upto a distance between from 3 km to 6 km [ After getting the total shut down and arangement the temporary power as per demand & direction ]

Dismentling the old Feeder Pillar Board after disconnection of existing cables of both incoming & outgoing ( after getting the total shut down ) as specific tools & tackles, machineries,labour charges and Hydra/JCB with maintains all kind of safety and shifting incl carrying the old Feeder Pillar Board with loading at site and unloading, sorting, stacking properly and dismentalled board deposited to Section store at the place as per direction upto a distance between from 3 km to 6 km [ After getting the total shut down and arangement the temporary power as per demand & direction ]

Repairing of existing old Feeder Pillar Board incl supply & fixing of 63 & 32 A TPN Main switch , Timer clock , contractor coil etc. as per sample , incl. change the damage internal wiring of the feeder pillar board to complete the board and damage / dismentalled materials deposited to Section store as per direction of EIC.

Installation of the feeder pillar board and carrying the same from Section store at the place upto a distance between from 3 km to 6 km as specific tools & tackles, machineries,labour charges and Hydra/JCB with maintains all kind of safety and installation the feeder pillar with brick foundation of suitable size with hard jhama , cement morter soaling at bottom 300mm below GL & 450mm above GL neatly plastered & neat cemented finish incl. paInting by best quality 2 coats of synthetic enamel Paint over 1 coat of RO primer as per direction of the EiC.

Cutting the hard metal road for laying the cable in underground trench by drill machine with additional manual labour as per direction of EIC .[ Total Mending the HARD METAL ROAD with new one ]

Repairing of existing defective Board for High mast incl supply & fixing of control motor ( as per sample ) which are reqd for the movement of High mast fittings from ground to top of the mast , incl. change the damage internal wiring of the board and painting to complete the board and damage / dismentalled materials deposited to Section store as per direction of EIC.

Supplying & fixing of Inter connection between control panel to fittings by 1.1 KV grade 4 core x 10 sqmm unarmoured copper cable (make-Gloster/KEI / Havells/Polycab/PWD appvd as per direction of EIC [ for the existing High Mast of PSP ]

Excavation of morrum soil by expert additional manual labour with special care and filling & ramming as far as possible and direction of EIC. [ For detection of cable fault at various location of PSP and Mending the HARD METAL ROAD with new one ]

Dismentling the existing cables ( 4 C x 70 Sq mm & 4 C x 10 Sq mm ) from UG trench by Co's own tools & tackles and extra additional manual labour by maintening normaley as far as possible and direction of EIC. [ For various location of PSP ]

Supplying & Laying of 1.1 KV grade 4 core 70 sq mm sizes Al. armoured XLPE cable (make: Gloster /Havells I KEI I Polycab I PWD approved) in underground trench as per direction of EIC [ For various location of PSP ]

Supplying & Laying of 1.1 KV grade 4 core 10 sq mm sizes Al. armoured XLPE cable (make: Gloster /Havells I KEI I Polycab I PWD approved) in underground trench as per direction of EIC [ For various location of PSP ]

Straigh through Jointing for the following sizes of cable by compound jointing kit including S&F ferrul, tapes and jointing materials with expert technician who are doing the same nature of job and complete the job . (Brand approved by EIC) for 4 core 70 sq mm [ For various location of PSP ]

Straigh through Jointing for the following sizes of cable by compound jointing kit including S&F ferrul, tapes and jointing materials with expert technician who are doing the same nature of job and complete the job. (Brand approved by EIC) for 4 core 10 Sq mm [ For various location of PSP ]

Supply & Fixing of 415 Volts 50 Hz, 4 pole, ML type, power contractor ( L&T make) as per sample and direction of EIC [ For existing location of PSP ]

Supply & Fixing of Timer clock ( L&T make) with NO+ NC Aux. Contact as per sample and direction of EIC [ For existing location of PSP ]

Labour charges & supervission charges for temporary rectification the faulty portion with necessary arrangement and as per direction of EIC [ For various location of PSP ]

Inter connection between Loop Box to fittings by 1.1 KV grade 3 core x 2.5 sqmm unarmoured copper cable (make-Gloster/KEI /Havells/POLYCAB /PWD appvd ) for fittings as per direction of EIC [ for the existing poles throughout the complex of PSP ]

Supply & fixing of MS structural works with structural members of channel sections 150 x50 cross with necessary support MS angle (50x50x6mm) of required length by nuts, bolts, washers etc. at the bottom & top as required.The MS angles (approx 12 inch) are to be grouted and fixing arrangement by special arranmgement with necessary chera angle, nuts bolts etc to complete the work for Signboard fixing as per requirement and direction EiC. conforming to IS : 226, IS:808 & SP (6) -1961 connected to one another with bracket direction of Engineer-incharge complete incl cutting to requisite shape and length fabrication with necessary bolting.metal are welding conforming to IS: 816-1969 & IS : 1995 using electrodes of approved make and brand conforming to IS:814-2004 and erection all complete and direction of EIC [ For the 3 nos Gate at PSP ]

Supply of 1.1 KV grade 4 Core x 16 Sq. mm XLPE Insulated & Sheathed Armoured Aluminium Conductor cables ( Make Gloster I Polycab/ KEI / PWD Appvd ) [ for the existing installation at various location throughout the complex of PSP ]

Supply of 1.1 KV grade 4 Core x 10 Sq. mm XLPE Insulated & Sheathed Armoured Aluminium Conductor cables ( Make Gloster I Polycab/ KEI / PWD Appvd ) [ for the existing installation at various location throughout the complex of PSP ]

Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per Mtr. including filling the space between the bricks and cable and also the trenchwith shifted soil, leveling up and restoring surface duly rammed [ After cutting the HARD METAL ROAD and mending good the damages the road with new one ]

Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables 4 Core 10 Sq. mm

Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials 4 Core 10 Sq. mm

S&F of LED Sign Board of suitable Size with 10"depth Board made 3 mm thick ACP Sheet (Alstrong/ Aludecor) finished with approved metallic colour as back ground (blue) after router cutting. The riser structure also shall be covered with ACP Sheet.& appx 6- 7 inch depth (Both size ACP sheet) incl Supply & Installation of acrylic lettering (imported 3 mm) signages.The facia should be made of acrylic provision should be as such that inside each letter LED lights (defused type, waterproof) will glow throughout the letter.The led will be connected through driver.The board should be fixed on 30'x6'x 1' iron frame,The letters will be fixed on the board by the steel nuts & bolts etc and to the complete board from manufacturing unit and carrying to the site ,unloading the board and lifting it to the top of the gate by manpower and fixing on proper place as per direction of EIC [ For the 3 nos Gate at PSP ]

Supply & Installation of Feeder pillar box of suitable size made with 5 mm MS plate having front opening hinged with door handle and locking arrangement with lock and keys. There should be proper ventilation The pillar box should be erected over suitable brick structure with plaster and neat cement finish and to be painted by two coats of paints over two coats of primer. The pillar box should be provided with following items with necessary fixing arrangement & connection etc. as required to complete as per direction of EIC 1) S & F of 415V, 50Hz, 40 A ,TPN MCB Isolator (Make-Legrand/ L & T) ---1no. 2) S & F of 415V 63 A, 4 Bar Copper BBC 3) S & F of 415V, 50Hz 32A, TPN MCB (Make-Legrand / L & T) --- 1 nos

4) S & F of 250V, 50Hz, 40 Amp, DP MCB Isolator (Make-Legrand/ L & T) - 1no 5) S & F of 230V 50 Hz, 16 Amp Single dial 1 x 24 Hrs. Timer (Microrex QT 31) of quartz driven running reserve Day dia back up by nickle cadminum battery (Make-GEC / Legrand) -1no. 6)S & F of 250V, 50Hz, 40 Amp DP Conctractor with ( 2NO or 1 NO + 1 NC Aux. Contract) (Make-Legrand/ L &T ) -1 no. 7) S & F of Auto / Manual By pass Toggle Switch arrangement -1no. 8) S & F of 250V, Diode type neon Indicator lamp (Make -Legrand/ L & T) -1no 9) S&F of necessary Terminal block [ For the controlling of sign board at PSP ]

Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall as per GS .

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages No. 4 SWG [ For the iron structure at PSP ]

Supply & Fixing of 9W or above rating LED Spike/ Bush light with die-cast aluminium housing designed for rugged outdoor usage & IP65 protection .

Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. Jong and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm Jong GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled witb bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level by ISI Medium [ for the existing location throughout the complex of PSP as per direction ]

Excavation of soil for installation of Earth Electrode and filling & ramming. (For Morrum Soil) [ for the existing location throughout the complex of PSP as per direction ]

Service charge towards inspection & Service of Cummins Engine

Servicing, checking, testing commissioning of AMF panel of DG set.

S & F of Separator Fuel Water (Pr. Code 3329989)

S & F of Filter Lubricating Oil (Pr. Code 4096196)

S & F of Filter, Oil Bypass. (Pr. Code 3880311)

S & F of Element. CRN Resistor (Pr. Code 4072352)

S & F of Clean Master Engine and Genset parts cleaner . (Pr. Code AX1017108)

S & F of Hand Cleanx Waterless Industrial Hand Cleaner . (Pr. Code AX1017109)

S & F of Rrust Guardian Instant Rust Fighter.(Pr. Code AX1017110)

S & F of Funnel Fuel Filter - Conductive -l (Pr. Code AX1015647)

S & F of Valvoline Premium Blue 7800 Plus 1/55 Ltr (Pr. Code 506655)

S & F of Valvoline Premium Blue 7800 Plus 1/10 Ltr (Pr. Code 506924)

Delivery Charges of all material from store to site.

S&F of Cummins Engine Controller as per existing sample

Supply of HSD Oil

Diesel Filling charges into DG Set.

Dismantling & disconnection & Reconnection the of H.T & L.T cables / copper bars etc to its original position with the expert technician with the co's own tools & tackles at site to complete the job as per direction of EIC .

Charges of various test of Transformer winding resistance. voltage ratio. , phase displacement. short-circuit impedance ,no-load loss etc as per requirement at the works as per direction of EIC.

Checking , Cleaning, Servicing , Tightning of 11 KV , 630 Amp rated , H.T switch gear with the expert technician with the co's own tools & tackles at site to complete the total work as per direction of EIC i) Checking , Cleaning and testing of front cover, push button, locking device etc comp. ii) Checking , Cleaning and testing of electrical spring charging system iii) Checking , Cleaning and testing of tripping coil comp. iv) Checking , Cleaning and testing of closing coil comp. v) Checking , Cleaning and testing of Protection Relay comp. vi) Checking , Cleaning and testing of main contact comp. vii) Checking , Cleaning and testing of fixed contact comp viii) Checking , Cleaning and testing of moving contacts comp ix) Checking , Cleaning and testing of Breaker main Mechanism

x) Checking , Cleaning and testing of main spring/tripping spring/locking spring comp. xi) Checking , Cleaning and testing of spring charging handle comp. xii) Checking , Cleaning and testing of breaker rear terminals comp. xiii) Checking , Cleaning and testing of racking mechanism properly comp. xiv) Checking , Cleaning and testing of cams gears , spring ,etc comp. xv) Checking , Cleaning ,testing and tightening of control unit connection block and chasis rear terminals comp.. xvi) Checking , Cleaning , testing and tightening of all bus bar / support. xvii) Checking , Cleaning , testing and tightening of all live terminal properly xviii) Cleanness & dryness of the panel.

Supplying and fixing of 250V A.C. timer fixed on wall with flat iron frame as per direction of EIC and the Box should be comprising with the following accessorise-- i) Double-door SPN MCB Distribution Board with IP-42/43 protection 10 /12 way Enclosure as requd. (Make- Legrand / L & T ) -1 no. ii) 230V 50 Hz, 16 Amp Single dial 1 x 24 Hrs. Timer (Microrex QT 31) of quartz driven running reserve Day dia back up by nickle cadminum battery (Make-GEC / Legrand) -1no. iii) 250V, 50Hz, 40Amp DP Conctractor wit ( 2NO or 1 NO + 1 NC Aux. Contract) (Make-Legrand/ L & T )-1 no. iv) 250V, 50Hz, 40Amp, DP MCB Isolator (Make-Legrand/ L & T) -1no v) Auto / Manual By pass Toggle Switch arrangement -1no. vi) 250V, Diode type neon Indicator lamp (Make -Legrand/ L & T) -1no vii) Bakelite base with FP bolt type stud / Terminal block incl S & F Neutral Bar etc with this box for termination of power. viii) The complete arrangement must be wiring by 2.5 sq mm PVC insulated Cu wire with suitable length incl socketing/lugs etc as per requirement & direction of EIC.

PART-B : INTERNAL EI WORK

Supplying and fixing double door Vertical TPN MCB Distribution board for MCCB incomer with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand//L&T / ABB) of the following sizes as to GS.

6 way Enclosure upto 160 Amp

Supplying and fixing double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment (Make Legrand/L&T/ ABB ) as to GS

6 way Enclosure

Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment Make-Legrand (607712) /L&T/ ABB) as to GS.

2+ 12 way Enclosure

Supplying and fixing double door sheet steel (16SWG), powder coated cable end box for VTPN DB horizontal / vertical enclosure with IP-42/43 protection, on angle iron frame on wall & mending good the damages to original finish with nuts bolts etc incl. provision for earthing attachment Make-Legrand /L&T/ ABB) as to GS.

Supplying and fixing 415 V four pole MCCB of breaking capacity 25kA/35kA with fixed thermal and fixed magnetic/adjustable thermal and fixed magnetic setting in existing DBs/ enclosure and necessary connection Make-Legrand/L&T/ABB, as to GS.

Supplying and fixing MCCB SS enclosure with IP-20/30. protection, powder coated provision for four pole MCB/MCCB , concealed at wall after cuttmg the wall & mending good the damages to original finish/ on flat iron frame incl. painting, connection & provision for earthing attachment.

Supplying and fixing 240/415 V Isolator on din rail of existing DBs and necessary connection Make-Legrand / L&T/ ABB, as to GS.

Supplying and fixing 240/415 V, MCB of Breaking capacity 10 kA & C characteristics on din rail of existing DBs and necessary connection Make- Legrand/ /L&T/ ABB as to GS.

6A - 32A SP MCB

63A TP MCB

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen pipe complete with all accessories embedded in wall to light/fan/ call bell points with Modular type switch (Brand approved by EIC) fixed on Modular GI switch board with top cover plate flushed in wall incl. mending good damages to original finish.

㈀㐀㈀㌁Ȁ㈁ഀ㄁฀㈁ᄀ㄁᐀㈁─㄁☀㈁㠀㄁㤀㈁儀㐁刀㈁最㄁栀㈁爀㄁琀㈁缀㄁耀㈁대㐁똀㈁먀㄁묀㈁ሀ癁牥条⁥畲〱洠牴䄀敶慲敧爠湵ㄠ′洠牴Ȗ䠈䐀獩湴‮眠物湩⁧湩㈠⼲⸰″ㄨ㔮猠浱⥭猠湩汧⁥潣敲猠牴湡敤⁤䘧❒倠䍖椠獮汵瑡摥†…湵桳慥桴摥†猠湩汧⁥挠牯띥瑳慲摮摥†挠灯数⁲楷敲⠠牂湡⁤灡牰癯摥戠⁹䥅⥃椠㤱洠潢敲‬㌠†浭琠楨正瀠汯瑹捨楰数挠浯汰瑥⁥楷桴愠汬愠捣獥潳楲獥†浥敢摤摥椠慷汬琠㐲‰⁖䄶㔠瀠湩瀠畬⁧潰湩⁴湩汣‮♓⁆㐲

3 pin Modular type plug socket & Modular type switch (Brand approved by EIC) incl. S&F earth continuity wire, fixed on 4 Module GI switch board with 3/4 Module top cover plate flushed in wall incl. mending good damages to original finish.12421212.112D1E2Q1R2\1]2_1`2a1d2h5i2‘1“2¥1¨2À1Â2Ë1Ì2Ù1Ú2Ý1á2
1
2;
1<
2G
4H
2Q
1R
2d
1e
2t
1w
2
1’
2§
1¨
2°
1±
2º
1»
2Ë
1Ì
2Ñ
1Ò
2Ø
3Ù
2ã
4æ
2ï
4ð
2û
1ü
2ý
1þ
2ÿ
1212 On Board¯
(Supply & Fixing 240 V. 3 nos. 16 A, 3 pin Modular type plug socket with 3 nos. 16A Modular type switch (Brand approved by EIC). 20A Modular switch type SP MCB (C-Curve) and Indicator without plug top on 2 row 12 Module GI Modular type switch board with 2 row 12 Module top cover plate flushed in wall incl. S&F switch hoard and cover plate and making nccy. connections with PVC Cu wire and earth continuity wire etc.12$3'27182A1B2Q1R2g1h212•1–2ª1«2Ç1È2î4ï2ø1ù2
4
2
4
2F
1G
2g
4h
2q
1r
3t
2~
1€
2¤
1¦
2®
1É
8Supply & Fixing 240 V, 4 nos. 6 A. 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC). 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc (Computer Board)121213"2%1+2/1028192B1C2S1T2^4_2h1i2m4p2‚1„2”4•2™3š2ª1«2¬1­2Ï1Ñ2â1å2ü1ý2
1
22
13
44
2d
1e
2i
1j
2w
1z
2„
1†
2
1
2¹
1Â
2l
3Supply & Fixing 240 V. 6 A. 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch. without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.41 21212-1.221328192B1C2V1W2`1a2n1o2r4s2y1z21€2”4•2²1³2Å1Æ2Ê1Ì2Ù1Ú2é1ê2

1
2+
1.
2<
4=
2D
1E
2H
1I
2`
1c
2[
#Supply & Fixing 240 V. 16 A. 3 pin Modular type plug socket (Brund approved by EIC) with 16A Modular type switch. without plug top on 4 Module GI Modular type switch hoard with top cover plate flushed in wall incl. S&F switch hoard and cover plate and making neey. connections with PVC Cu wire and earth continuity wire etc.412!1%2213294:2V1\2n4o2u1v2z1{242¬1­2É1Ê2Ð1Ñ2
1
2)
1+
2.
40
25
48
2P
1R
2»
2Supplying and fixing polythene pipe complete with fittings as necy under ceiling I beam. bound with 22 SWG GI binding wire incl. supplying and drawing 1 x 18 SWG GI Wire as fish wire inside the pipes and fittings and providing 50 mm dia disc of MS sheet (20 SWG) having colour paint at one face fastened at the load point end of the polythene pipe with fish wire (synchronizing with roof/beam casting work of building construction)4242122432@1B2U6W2¡1¤2µ3¶2À1Á2È4Ê2ä1å2
1
2
4
2,
1-
21
12
2A
1B
2g
4h
2m
1n
2w
1y
2€
1
2
1
2—
1˜
2¢
1£
2«
4¬
2±
1²
2$19 mm dia 3mm thick Polythene Pipe$25 mm din 3mm thick Polythene Pipe aDistribution wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire (Polycab/ Havells/ KEI/ Gloster) after Cutting Channel of size (40 mm x 40 mm) ( on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 19 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.1421242#1$2/102;4<2H4I2S1T2r7s2u1v2y1z3}27‚4„2 1†4‡2–4—2˜1›2Ÿ1 2¦1§2¨1©2Ã1Å2ú1û2þ4ÿ1
2
1
2
1!
2.
4/
21
42
23
44
2C
1E
2Z
4\
2a
1c
2n
4o
2
1
2ˆ
4‹
2
4
2“
1–
2£
1¦
2³
1µ
2·
1¸
4»
2Í
1Î
2Ó
1Ô
2×
1Ú
2à
1á
2ê
1ë
2ñ
1ò
2ý
4þ
1
2 4 262 x 1.5 sq mm + 1 x 1 .5 sq mm (for separate plug)F2 x 2.5 sq mm + 1 x 1 .5 sq mm ( for computer board, Power plug)12 x 4 sq mm + 1 x 2.5 sqmm (for AC Machine )šÝSupplying and Drawing 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed single core stranded copper wire (Polycab/ Havells/ KEI/ Gloster) (Brand approved by EIC) of the following sizes after Cutting Channel of size (43 mm x 43 mm) on masonry wall by Electric operated cutting machine incl. supplying & fixing heavy gauge 25 mm, 3 mm thick Polythene pipe by means of anchoring chemical (Hilti/Sika) and GI 'U' hooks of 8 SWG incl. supplying and drawing 18 SWG GI wire as Fish wire and mending good damages to original finish by using own tools and tackles.98989 8989898!9%8'9(8)9-8.9/8093849688998D9J8K:L8N9[8]9^8_9b8c9i:j9k8l9u8v9~8€9‰8Š9‹89¹8º9¼8¿9À8Ã9É8Ê9Ô8Ø9Ü8Þ9á8â9ç8è9ó8õ9÷8ù9ü8þ9ÿ8

9
8
9
8
9
8
9
8
9
8
9
8
9)
8*
9+
:,
9-
8.
95
8A
9D
8F
9K
8L
9O
8P
9V
8Y
9Z
8[
9`
8a
9c
8f
9j
8l
9m
8p
9q
8r
9t
8u
9v
8w
9ƒ
8„
9‡
8ˆ
9
8‘
9–
8š
:
9Ÿ
8¤
9¦
8ª
9«
8¬
9­
8¯
9°
8±
9¶
8·
9¸
8¹
9¼
8½
9¿
8À
9Â
8Ã
9Å
8Æ
9È
8É
9Ë
8Ì
9Í
8Ð
9Ô
8Õ
9Ö
8Ù
9Ú
8à
9á
8ã
9ä
:å
8è
9ï
8÷
9ù
8ú
9û
8ý
:898 9898"9$8&9*8+9/87998:9B8D9F8G9J8N9O8S9[8\9]8^9d8e9i8j9k8m9n8w9x8{9}8~989†8‰9‹8Œ98“9•8—9J4 x 10 sqmm + 2 x 6 sqmm (VTPN to TPN and any Special requirement)X2 x 6 sqmm + 1 x 4 sqmm ( from TPN MCB DB to SPN MCB DB s & Power Board )89 8 :89:89&8'9*85978E9I8J9P8Q9S8W94x 6 sqmm + 2 x 4 sqmm 7Supplying of 1.1 KV Grade following sizes Al. Armoured PVC/ XLPE Cable ( Make: Havells/ Gloster/ Polycab/KEI) as per direction of EIC989898989$8&9(8*9-:.8/:0958?9C8E9I8L9N8R9X8Y9Z8[9\:b8c9f8h9i;l8o9p8s:v8w9x8y9z8{9|8};9‹8Œ98’9”8š9›862 core 6 sqmm (for street light & Security light) : 898:989 8$9&8'9)8*908293859+4 core 70 sqmm ( from Panel to VTPN )˜2Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required 80 mm dia.989 8989898989 8!9%8)9*8+9085968:9>8B9D8F9G8J9K8P9Z8`9e8i9k8o9s8t9w8{9:8‚9„8‡9ˆ8Ž9‘8–9=
qLaying of cable above 35 sqmm to 95 sqmm at an average depth of 100 mm in floor/pavement/wall etc. after cutting floor/pavement/wall/ and making holes incl., embedding the cable at an average depth as below and mending good the damages to original finish incl. removing the rubbish.
989 8 9 898#9*8/90839486988:9?8G9K8V9X8Y9Z8[9]8_9`8a9e8k9l8n;q9r8t9w8}9€8‚9„8 :†8‡9‰8‹9Œ89‘8“9—8œ98 9£8¤9¥8¦9¬8­9®8°:´8·9¹8¼9À8Â9Ä8Å9Æ8Ê9Ë8Î9Ï8Ò9Õ8Û9Ý8à9ã8æ9ê8ï9ð8ò9ó8ô9û8
9
8
9
8
9
8
9
8
9
8
9
8
9
8#
9$
8(
9,
8.
91
83
95
89
9

9" (23 cm)½Supplying & Fixing angular holder (Anchor) on 3" wooden double round block incl. S&F 9 Watt LED lamp (Make Philips I Wipro I Crompton I PWD Approved ) as per direction of EIC4*4 *h4l*x4y*€@ƒ*‰*Š@Œ*”*•@—*™4›*¿Fixing only single/twin florescent light fitting

洀⼀渀℀瀀⼀猀℀渀ࠁˆ⥇䌠扡敬䄠汬祥਺慃汢⁥湥牴⁹牡慲杮浥湥⁴†眠汩敢瀠潲楶敤⁤湩琠敨挠扵捩污†瀠湡汥†椠敶瑲捩污瀠獯瑩潩†漠⁦猠畩慴汢⁥†猠穩⁥眠瑩⁨㈠〰†流⁰挠灡捡瑩⁹‴眠祡†䍁䐯⁃洠歡⁥

Please Enable Macros to View BoQ information