Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Rejected-Technical | Rejected-Technical Technically Non Responsive |
| 2 | Rejected-Technical | Rejected-Technical Technically Non Responsive |
Tender Value
₹14.8 Cr
EMD Value
₹29.6 L
Closing Date
16 Mar 2026, 3:00 pmClosed
Mission Director, SBM- U
Office of the Mission Director, Swachh Bharat Mission -Urban, Assam, Dispur, Guwahati-6
Design, Supply, Transportation, Construction, Installation, Testing, and Commissioning of 3 Nos. of STPS of total 3.5 MLD Capacity at Kampur MB -1 MLD using WSP, Digboi MB -1.5 MLD and Titabar MB -1.0 MLD using ASP or EA or any Mechanized Technology
2026_UDD_51065_1
SBM(U) 282/2025/27 Dt. 02-02-2026
Open Tender
Civil Works - Water Works
Works
730 days
Kampur MB, Digboi MB and Titabar MB
Please refer Tender documents.
3 documents required · 3 mandatory
₹20,000
₹29.6 L
Dispur, Guwahati- 6
16 Jun 2026
11 Feb 2026
17 Mar 2026
11 Feb 2026
16 Mar 2026
18 Feb 2026
17 Feb 2026
Stage I: Construction of 1.0 MLD Capacity STP in Waste Stabilzation Pond (WSP) Technology and 5 KLD FSTP at Kampur ULB
Schedule I: Engineering Services : Design Services
Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per socpe of the work of tender document..
Schedule II: Civil Works for STP of 1.0 MLD Capacity in Waste Stabilzation Pond Technology
Design, supply, construction, installation, testing and commissioning of Coarse screen chamber & Wetwell
Design, supply, construction, installation, testing and commissioning of Inlet Chamber
Design, supply, construction, installation, testing and commissioning of Bar Screen Chamber
Design, supply, construction, installation, testing and commissioning of Grit Chamber
Design, supply, construction, installation, testing and commissioning of Parshall Flume
Design, supply, construction, installation, testing and commissioning of Anaerobic Pond
Design, supply, construction, installation, testing and commissioning of Facultative Pond
Design, supply, construction, installation, testing and commissioning of Disinfection Tank
Schedule III: Civil Works for FSTP of 5 KLD Capacity
Design, supply, construction, installation, testing and commissioning of Sludge Receiving Chamber
Design, supply, construction, installation, testing and commissioning of Inlet Chamber
Design, supply, construction, installation, testing and commissioning of Sludge Drying Bed
Design, supply, construction, installation, testing and commissioning of Leachate Sump
Design, supply, construction, installation, testing and commissioning of Anaerobic Baffled Reactor
Schedule IV: Electrical Work for STP and FSTP
Design, supply, erection, testing and commissioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, Cable trench, Cable tray, Gland and lugs, internal lighting & exhaust system external lighting, campus lighting, etc and all other associated works as per Employer's Requirements
Schedule V :Power Connection for STP & FSTP
Providing electrical power connection of required kVA to STP & Lifting station site including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL
Schedule VI: Electro Mechanical works for STP and FSTP
Design, supply, erection, testing and commissioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless-Steel Screen, Raw Sewage Transfer pump from STP Inlet Wet Well to Pre-treatment Units, Chlorine Dosing Pump, Chlorine Dosing tank agitator, Electro-Magnetic Flow Meter, Pen stock gate/sluice gate valve for inlet sewage For Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (For All Pumps), Pipe & fittings with all accessories, PH meter, Dissolved Oxygen Meter, Valve & fittings, etc and all associated components installed and completed in accordance with the Employer's Requirements.
Schedule VII: Interception and Diversion (I&D) Work
Design, Construction, testing & Commissioning of Coarse Screen Chamber and Sump Well for Convey System with required dimensions for STP as per design specification Including Excavation in all types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for Construction of R.C.C M30 Well staining internal & external surface, railing, MS ladder, etc. complete and any other works as directed by Engineer in charge/employer.
Design and construction of Pump house in B.B. Masonry common bricks in C.M. 1:4, including 15 mm cement plaster, M.S. shutters, Doors, Windows, with oil bound washable distemper internal & external surface with all complete as per Employer's Requirements.
Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for required length which includes RISING MAIN, GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved grade excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing complete for I&D system as per Technical Specifications and direction of Engineer/Employer.
Road Restoration for interception and Diversion, laying of Raw Sewer line with all respect as per specification of concerned authority and as per the direction of Engineer-in-Charge.
Schedule VIII : Construction of Community Level Soak Pit System.
Design and Construction of Community Level Soak Pit System at ward no- 8, 9 and 10 with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.
Schedule IX: Infrastructure Works
Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.
Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Schedule X: Five Year O&M (Operation and Maintenance after completion of Capex work and trial & satisfactory commissioning of complete project)
Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)
1st year of Operation and Maintenance
2nd year of Operation and Maintenance
3rd year of Operation and Maintenance
4th year of Operation and Maintenance
5th year of Operation and Maintenance
SStage II: Construction of 1.5 MLD Capacity STP in Capacity in Aerobic Process at Digboi ULB
Schedule I: Engineering Services : Design Services
Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per scope of the work of tender document.
Schedule II: Civil Works for STP of 1.5 MLD Capacity in Aerobic Process.
Design, supply, construction, installation, testing and commisioning of Coarse Screen Chamber and Wet Well
Design, supply, construction, installation, testing and commisioning of Inlet Chamber
Design, supply, construction, installation, testing and commisioning of Bar Screen Chamber
Design, supply, construction, installation, testing and commisioning of Grit Chamber
Design, supply, construction, installation, testing and commisioning of Parshall Flume
Design, supply, construction, installation, testing and commisioning of Equalization Tank
Design, supply, construction, installation, testing and commisioning of Aeration Tank
Design, supply, construction, installation, testing and commisioning of Secondary Settling Tank
Design, supply, construction, installation, testing and commisioning of Disinfection Tank
Design, supply, construction, installation, testing and commisioning of Filter Press Housing
Schedule III: Electrical Works for STP
Design, supply, erection, testing and commisioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, cable trench, cable tray, gland & lugs, internal lighting & exhaust system, external lighting, etc and all other associated works as per Employer's requirements.
Schedule IV: Electro Mechanical works for STP
Design, supply,erection, testing and commisioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless Steel Screen, Raw Sewage Transfer Pump from STP Inlet Wet Well to Inlet Chamber, Equalized Sewage Transfer Pump to Aeration Tank, Air Bower for Equalization Tank, Air Blower for Aeration tank, Diffuser System for Equalization Tank, Diffuser System for Aeration tank, Secondary Tank Scraping Mechanism, Return of Activated Sludge Tranfer Pump, Waste of Activated Sludge Transfer Pump, Chlorine Dosing Pump, Chlorine Dosing Tank Agitator, Electro-Magnetic Flow Meter, Pen Stock Gate / Sluice gate Valve for Inlet Sewage for Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (for all Pumps), Pipe and Fittings with all Accessories, pH Meter, Dissolved Oxygen Meter, Valve & Fittings, etc and all associated components installed in accordance with the Employer's requirements.
Schedule V: Interception and Diversion (I&D) Works for STP
Design, construction, testing and commisioning of Coarse Screen Chamber and Wet Well for Convey System with required dimensions for STP as per design specification including Excavation in al types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for construction of R.C.C. M30 well staining internal & external surface, railing, MD ladder, MS Sluice gate, etc. complete and any other works as directed by Engineer in charge/employer.
Supply, erection, testing and commisioning of Sewage Submersible pump as per design specification of Non Clog type Sewage water. Design, supply, erection, construction and commisioning of Pumphouse as per design in BB Masonary common bricks in C.M. 1:4, including 15 mm cement plaster, MS shutters, doors, windows, with oil bound washable distemper internal and external surface with all complete as per Employer's Requirements.
Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for the length as per the site requirement which includes RISING MAIN, GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved graed excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing completefor distribution system as per Technical Specifications and direction of Engineer:
Road Restoration as per requirement including filling of earth, graded aggregates,compaction, concrete casting and bitumen topping.
Schedule VI: Power Connection for STP
Providing electrical power connection to STP of required KVA to STP site + transmission line for I&D pumps including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL
Schedule VII: Infrastructure Works for STP
Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.
Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Schedule VIII : Construction of Community Level Soak Pit System.
Design and Construction of Community Level Soak Pit System at ward no- 1 with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.
Design and Construction of Community Level Soak Pit System at ward no- 2 with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.
Schedule IX: Five Year O&M (Operation and Maintenance (after completion of Capex work and trial & satisfactory commissioning of complete project)
Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)
1st year of Operation and Maintenance
2nd year of Operation and Maintenance
3rd year of Operation and Maintenance
4th year of Operation and Maintenance
5th year of Operation and Maintenance
SStage III: Construction of 1.0 MLD Capacity STP in Aerobic Process at Titabar ULB
Schedule I: Engineering Services : Design Services
Sub Soil Investigation & Survey, Design, Drawings work based on the guidelines laid down in the Manual published by CPHEEO, Ministry of Housing & Urban Affairs and SBM (Urban) 2.0 as per scope of the work of tender document.
Schedule II: Civil Works for STP in Aerobic Process.
Design, supply, construction, installation, testing and commisioning of Coarse Screen Chamber and Wet Well
Design, supply, construction, installation, testing and commisioning of Inlet Chamber
Design, supply, construction, installation, testing and commisioning of Bar Screen Chamber
Design, supply, construction, installation, testing and commisioning of Grit Chamber
Design, supply, construction, installation, testing and commisioning of Parshall Flume
Design, supply, construction, installation, testing and commisioning of Equalization Tank
Design, supply, construction, installation, testing and commisioning of Aeration Tank
Design, supply, construction, installation, testing and commisioning of Secondary Settling Tank
Design, supply, construction, installation, testing and commisioning of Disinfection Tank
Design, supply, construction, installation, testing and commisioning of Filter Press Housing
Schedule III: Electrical Works for STP
Design, supply, erection, testing and commisioning of all Electrical works for STP including electric cables, MCC panel, main panel, earthing, cable trench, cable tray, gland & lugs, internal lighting & exhaust system, external lighting, etc and all other associated works as per Employer's requirements.
Schedule IV: Electro Mechanical works for STP
Design, supply,erection, testing and commisioning of all Mechanical works for STP including Coarse Bar Screen, Fine Stainless Steel Screen, Raw Sewage Transfer Pump from STP Inlet Wet Well to Inlet Chamber, Equalized Sewage Transfer Pump to Aeration Tank, Air Bower for Equalization Tank, Air Blower for Aeration tank, Diffuser System for Equalization Tank, Diffuser System for Aeration tank, Secondary Tank Scraping Mechanism, Return of Activated Sludge Tranfer Pump, Waste of Activated Sludge Transfer Pump, Chlorine Dosing Pump, Chlorine Dosing Tank Agitator, Electro-Magnetic Flow Meter, Pen Stock Gate / Sluice gate Valve for Inlet Sewage for Coarse Screen Chamber Inlet Gate, Pressure Gauge, Level Sensors (for all Pumps), Pipe and Fittings with all Accessories, pH Meter, Dissolved Oxygen Meter, Valve & Fittings, etc and all associated components installed in accordance with the Employer's requirements.
Schedule V: Interception and Diversion (I&D) Works for STP
Design, construction, testing and commisioning of Coarse Screen Chamber and Wet Well for Convey System with required dimensions for STP as per design specification including Excavation in al types of Strata, filling available excavated earth excluding rock, disposing of material, dewatering with providing & supplying, binding, reinforcement as per design requirement for construction of R.C.C. M30 well staining internal & external surface, railing, MD ladder, MS Sluice gate, etc. complete and any other works as directed by Engineer in charge/employer.
Supply, erection, testing and commisioning of Sewage Submersible pump as per design specification of Non Clog type Sewage water. Design, supply, erection, construction and commisioning of Pumphouse as per design in BB Masonary common bricks in C.M. 1:4, including 15 mm cement plaster, MS shutters, doors, windows, with oil bound washable distemper internal and external surface with all complete as per Employer's Requirements.
Design, supply, laying, hydro-testing, and comissioning of Raw Sewerage Main line for STP for the length as per the site requirement which includes RISING MAIN ,GRAVITY MAIN and Manhole Chamber (Bricks & RCC) including excavation in trenches, dismantling of all type of pavements, sand bedding as required, backfilling of trenches and foundations with approved graed excavated materials and approved graded river sand as required including loading and unloading , Shuttering and shoring the earth at different levels in foundations where necessary with required prop, struts, planks, timbers, nails etc. including dewatering if necessary, hydro-testing completefor distribution system as per Technical Specifications and direction of Engineer:
Road Restoration as per requirement including filling of earth, graded aggregates,compaction, concrete casting and bitumen topping.
Schedule VI: Power Connection for STP
Providing electrical power connection of required kVA to STP site + transmission line for I&D pumps including drawal of electrical power line from the nearby APDCL Grid, setting up of required capacity Sub-Station, providing electrical control panel & metering unit etc. and obtaining necessary approval & load sanction from APDCL and payment of supervision & other charges to APDCL
Schedule VII: Infrastructure Works for STP
Design, installation, testing and commissioning of the Deep Tube Well arrangement as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Internal Path and Approach Road, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Design & Construction of Boundary Wall / Fencing along with Entrance Gate at Treatment plant, as directed by the Engineer-in-Charge/Employer.
Design & Construction of office building including Panel, DG and Store Room as per site requirements, complete in all respects, as directed by the Engineer-in-Charge/Employer.
Schedule VIII : Construction of Community Level Soak Pit System.
Design and Construction of Community Level Soak Pit System at ward no- 1,3,6 & * with Screen Chamber, Settling Tank, Soak Pit as per the standard engineering practice outlined in the CPHEEO Manual and IS 2470 & all complete as per Employer's Requirements.
Schedule IX: Five Year O&M (Operation and Maintenance (after completion of Capex work and trial & satisfactory commissioning of complete project)
Operation & Maintenance of the entire Sewerage Treatement project including Manpower, chemicals and material, repairing of all components as required, repair to pipeline leakages, road restoration for the repairing works, painting of civil or non-civil structures (if any), retrofitting works of the civil structure wherever necessary and management of STP, pumps and motors, pumping stations including mechanical, electrical panels, necessary accessories. It also includes activities for maintenance of campus development, laboratory, etc. for 5(Five) years.(APDCL Energy Charges will be borne by the ULB)
1st year of Operation and Maintenance
2nd year of Operation and Maintenance
3rd year of Operation and Maintenance
4th year of Operation and Maintenance
5th year of Operation and Maintenance
stage.html
html • 0.02 MB
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
BiddocumentDigboiKampurTitabar.pdf
Tender Documents • 2.36 MB
BOQ_81248.xls
BOQ • 0.38 MB
DPRs.rar
Additional Documents • 10.13 MB
Drawings.rar
Additional Documents • 12.43 MB
Extensionpackage.pdf
PDF • 0.22 MB
DateExtensionPackage.pdf
PDF • 0.20 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .