PERIODICAL SERVICES IN VARIOUS BLDGS IN 10 AFH AREA, REPAIR/MAINT OF CHAIN LINK FENCING, PLINTHS IRON ANGLES AND OTHER MISC ITEM, REPAIR/MAINT OF JOINERY AND ALLIED WORKS AT KV AREA AND REPAIR/REPLACEMENT OF GI/CPVC DISTRIBUTION NETWORK OF WATER SUPP

Amount

M&L for one coat of white washing on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots, complete all as specified and directed

All as per item No 01 here-in- above but on ceiling surfaces, complete all as specified and as directed

All as per item No 01 here-in- above but two coats on ceiling surfaces, complete all as specified and as directed

M&L for complete removal of existing treatment of on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying two coats of white wash, complete all as specified and directed

M&L for preparation old surfaces of plastered or unplastered old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of distemper oil emulsion on walls including cornics, complete all as specified and directed.

All as per item No 05 here-in- above but on ceiling surfaces, complete all as specified and as directed

M&L for complete removal of existing treatment on old decorated surfaces of wall including preparation of surfaces by scrubbing down with steel wire brushing scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying two coats of oil bound distemper over a coat of primer including cornics, pilasters etc, complete all as specified and directed.

All as per item No 07 here-in- above but on ceiling surfaces, complete all as specified and as directed

M&L for preparing of old painted surfacs of wood or wood based material of any description exc 10cm width or gridth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M&L for preparing of old painted steel surfacs of any description exc 10cm width or gridth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed.

M & L for applying wall care putty not less than 3mm thick on prepared surface of wall to obtain a smooth surface including making good any undulations on the surfaces, complete all as specified and directed.

M & L for complete removal of existing treatment & preparation of old decorated surfaces of wall and applying two coats of plastic emulsion paint over a coat of wall primer with any colour and pattern, complete all as specified and directed.

Demolition of unreinforced cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level), complete all as specified and directed.

M&L for 100mm thick plain cement concrete (1:2:4), type B-2, ( using 40mm graded crushed stone aggregate) as in plinth protection/hardstanding etc, complete all as specified and directed.

M&L for 75 mm thick plain cement concrete (1:2:4), type B-2, ( using 40mm graded crushed stone aggregate) as in plinth protection/hardstanding etc, complete all as specified and directed.

Dismantling fencing wire mesh any type including fillets and removing from site, complete all as specified and directed.

Supply only chain link fencing made out 4mm dia hot dipped galvanised iron wire of mesh 75mm x 75mm / 100mm x 100mm size made up to into mattress or cages, complete all as specified and as directed. Note :- Pre meter weight of chain link brought by the contractor shall be fixed through a BOO.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc., complete all as specified and directed.

Straining & fixing old chain link fencing including any type of standards, rails, straining bolts, including securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins, etc., complete all as specified and directed.

Dismantaling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement, complete all as specified and directed.

M&L for rolled mild steel, channel, angle, tee sections fixed independently without connecting plates etc. (cut to ordinary lengths i.e. within 20mm of the length indicated), complete all as specified and directed.

M&L for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes without any attachment, complete all as specified and directed.

Dismantling of asbestos cement (corrugated or semicorrugated sheets etc.) of any thickness including ridges hips valleys in roof coverings, complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area exc. 1.5 Sqm but n. exc. 4 Sqm each and removing from site, complete all as specified and directed.

Taking down chowkhats with shutters (without taking off shutters from the frames) area n.exc 1.5 Sqm and removing from site, complete all as specified and directed.

Taking down shutters only of any description area not exc. 1.00 Sqm each, complete all as specified and directed.

Taking down shutters only of any description area exc 1.00 Sqm but not exc. 2.00 Sqm, complete all as specified and directed.

S&F pressed steel frames for doors size of frame 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F pressed steel frames for doors size of rame 105 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M & L plain cement concrete (1:2:4) type B-0, (using 12.5mm graded crushed stone aggregate) in door frame filling, bed plate, fixing of hold fast etc, complete all as specified and directed.

S&F 2nd class hardwood plain,solid,straight chowkats and frames, wrought, framed rebated on the solid, rounded or cahmfered put together with glue pinned at joint, complete all as specified and directed.

S&F solid PVC door frame of size 50mmX47mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

S&F factory made solid panel PVC moulded door shutter with particle board core 30mm thick (stile), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm prelam PVC sheet on back face, supplying and fixing in frame at site as per specification and drawing, complete all as specified and directed.

M&L 35mm thick 2nd class hardwood glazed and skeleton door shutter open rebated and prepared to receive glass edges of frames plain chamfered or rounded fitted with cut and mitred beads for securing glass etc., complete all as specified and directed.

S&F floor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and directed.

M&L for 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 30mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

S&F 25 mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed.

Supply and fixed in repairs second class hard wood 15mm thick boarding clan sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc., complete all as specified and directed.

Taking down and refixing in the same opening shutter of any dedcription not exceeding 1 Sqm each after necessary repair work, complete all as specified and directed.

Taking down and refixing in the same opening shutter of any dedcription not exceeding 1 Sqm each and n. exc. 2 Sqm each, complete all as specified and directed.

S&F MS butt hinges medium weight, cold rolled in 100mm, complete all as specified and directed.

S&F 75mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed type C-21, complete all as specified and directed.

S&F aluminium alliy,anodised,sliding door bolt 250mm long with hasp, staple(bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy, complete all as specified and directed.

S&F 150mm long aluminium anodised tower bolt of extruded section, complete all as specified and directed.

S&F 150mm long extruded aluminium alloy handles, fabricated type anodised, complete all as specified and directed.

S & F mild steel 300mm, ordinary rat rail rod pattern springs including roller and roller plate, complete all as specified and directed.

M&L for clamps, hold fast, hook, washer & similar small articles comfirming to Fe-290 Gde-E-165, complete all as specified and directed.

S&F mild steel window with side hung shutter incl projecting type hinges with steel handle and steel peg stay complete with glazing complete with glazing bars, dovetailed or welded, complete all as specified and directed.

S&F steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dove-tailed or welded, complete all as specified and directed.

S&F steel ventilator with top hung shutter (ISI marked) including hinges steel peg stay, complete all as specified and directed.

M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

S & F 3mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

S & F 3mm thick figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane, complete all as specified and directed.

M&L preparation of new or previously untreated wooden surface any description not otherwise described and exc 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed.

S&F hasp & staple safety type aluminium with mild steel hing pin including bolt to hinge plate and fixed with screw 100mm size, complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described and exc 10cm width or girth and applying two coat of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and directed.

Excavation in trenches not exceeding 1.5m depth and not exceeding 1.5m width for foundation and getting out for laying pipes etc.including forming bottom surface to required level in soft/loose soil, complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25cm thick, complete all as specified and directed.

Removing excavated soils to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified and directed.

M & L for road cutting/removing the hard standing/cutting plinth protection of building/path for laying of pipe line of any size, complete all as specified and directed.

M & L for PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) for making good to the excavated portion of road/hard standing/plinth protection of building etc, complete all as specified and directed.

Horizontal boring under the road below 1mtr from the road surface and dia of hole not exc 100mm, with out damaging the existing road, getting out and disposal of soil to a distance not exceeding 50m from the site of work, complete all as specified and directed

Supply and laying 75mm inner dia CPVC pipe with CPVC shedule 40 pipes and plain shedule 80 fitting in trenches, complete all as specified and directed.

Supply and laying of 50mm outer dia CPVC pipes with SDR-13.5 pipes & plain CPVC SDR 11 fittings in trenches, complete all as specified and directed.

All as per item No. 68 here-in above but 40mm outer dia, complete all as specified and directed.

All as per item No. 68 here-in above but 25mm outer dia, complete all as specified and directed.

All as per item No. 68 here-in above but 20mm outer dia, complete all as specified and directed.

S&F CPVC ball valve of size 50mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceble vall valve, complete all as specified and directed.

S&F CPVC ball Valve of size 40mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceble vall valve, complete all as specified and directed.

S&F CPVC ball Valve of size 25mm dia suitable for CPVC pipe incl necessary fittings and taking down old unserviceble vall valve, complete all as specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 50mm and taking down old unsrviceble valves, complete all as specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 40mm and taking down old unsrviceble valves, complete all as specified and directed.

Supply and fix gun metal gate/globe valve with iron wheel head, screwed both ends suitable for fixing with CPVC pipe of outer dia 25mm and taking down old unsrviceble valves, complete all as specified and directed.

Supply and fixing of rotational mouldede polyethylene water storage tanks (cylinderical vertical with closed top) of capacity 500 ltr cap. liters hoisted & fixed in position incl taking out u/s old one, complete all as specified and directed.

S&F float valve PTMT of size 20mm dia high pressure with polythene ball of size 6" dia and flynut including taking down old one, complete all as specified and directed.

Taking up or down steel tubing and connections, of size up to 40/50mm including cleaning for refixing or removal to store, complete all as specified and directed.

Refixing old steel tubing 40/50mm size and connections in new or old position (walls, ceiling, floors,trench etc.), complete all as specified and directed.

M & L for cutting existing steel tubing of size 40/50mm for alterations or additions (each cut measured), complete all as specified and directed.

M & L for screwing existing steel tubing of size 40/50mm for alterations or additions (or lengthening screw on pipe to from connector), complete all as specified and as directed.

Dismantling of valve pit cover made out of angle iron or mild steel, complete all as specified and directed.

Material and labour for mild steel work as in valve pit cover comprising of MS sheet ,bracings,supports,clamps and back plates fabricated from structual steel sections including nuts, bolts washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat ,one coat of synthetic enamelled paint (1st grade quality), complete all as specified and directed. Note: An amount of Rs.75045.00 on account of credit schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S. VINITA CONSTRUCTION

M/S I P GROUP

BHARAT ELECTRIC

M/S. NARENDRA KUMAR GARG

M/S. KUMAR CONSTRUCTION CO.

M/S ROY ENTERPRISE

M/S BISHAL ENTERPRISES