Constn of Prefab Office at Int.Wing Sec 77 SAS Nagar

Amount

CIVIL WORK

Dismantling of floor tiles at any floor of the building, laid in cement mortar including dismantling of cement concrete base and disposal of malba at a suitable place within a distance of 100 Mtrs of the complex complete in all respect. (CSR Item No.30.95)

Dismantling brick work tile, masonry or tile lining i) In Cement (CSR Item No.8.5)

Removing of existing Steel & SS railing from parapet and existing stair steps safely by the weldor & helpor Complete in all respects as per satisfaction of EIC (NS)

First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres above plinth level. (CSR Item No.11.6)

12.5 mm thick cement plaster 1:5 (CSR Item No.15.10)

20mm thick cement plaster 1:5 in two coat work (CSR Item No.15.21)

Scraping White wash and colour wash (CSR Item No.8.31)

Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish. (CSR Item No.16.15)

Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm (CSR Item No.16.59)

Cement concrete 1:8:16 with brick ballast 32mm / 40mm gauge mixing by mechanical means using concrete mixer volumetric type (CSR Item No.10.6 (b(ii)

Laying Cement concrete 1:2:4 with stone ballast or shingle mixing by mechanical means using concrete mixer volumetric type (CSR Item No.10.13 (a(ii)

Providing and laying vitrified floor tiles 32"x64" size premium quality, manufactured using Double Charge Technology, with water absorption less than 0.08% and conforming to IS: 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement :4 fine sand) complete (Design is homogenous throughout the tile body)(.NS)

Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in- charge. (NS)

Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. (CSR Item No.14.88)

Extra for marble / granite stone flooring in treads of steps and risers using single length up to 2.00 metre. (CSR Item No.14.76)

Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. (CSR Item No.14.86(a)

Removing , shifting of existing Pantry cabin size10'-2" X 10'-9" and Refixing the same at other place complete in all respects. (NS)

Providing and making core cutting in RCC slab or wall as directed by Engineer-in-Charge. (NS)

Providing and fixing in position singel socket SWR UPVC soil Waste or antisyphonage pipes as per IS 13592 of E.D.C Manufacture or of any other reputed firm including cutting, jointing, wastage, but excluding cost of jointing.Single Socket Type A, 160mm o/d single socket SWR UPVC pipe lines laid complete. (CSR Item No.30.74 (iii)

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including make cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. (CSR Item No.30.81 (iii)

For 160mm o/d pipes

Single Tee With Door

Door Elbow 90 Degree (All side socketed)

Disposal of Rubbish material inculding cost carriage Loading & Unloading

Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material within 50 meters lead as directed by Engineer-in-charge. (CSR Item No.8.44)

Providing and Fixing ceiling consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and to the entire satisfaction of engineer-in- charge. (CSR Item No.13.65)

Providing & fixing of perforated Acoustical Ceiling System with high Grade wood panels having hard raisend faced with a pit system backed with . The tile should have Humidity Resistance (RH) of 99%, NRC 0.75, Light Reflectance >84% with Fire Resistance as per BS476 (Part 6 & 7) in module size of 595 X 595 X 12 mm/1200x2400x12mm@ 400kg/m3 density. The Grid should be 24 mm wide T sections i.e. the Main Runner 3000mm in web height of 32 mm, 1200 mm & 600 mm Cross Tees in web height of 26mm to comprise main runner spaced at 1200mm centers securely fixed to the structural soffit using suspension system at 1200mm maximum centre. The First/Last suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm centre to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum centers and as per the drawing and the work complete in all respects to the satisfaction of Engineer in-charge. MAKE: ANAKON/ECOPHON/HIMALYA ACOUSTIC/ECOMUTE/ARMSTRONG. (NS)

Providing and Fixing of 15 to 18mm HDMR Flutted wood grooved panel having system NRC up to 0.88 with lineal perforation The fluted pannel to be fixed GI ceiling section frame and over 12mm thick waterprof ply than fluted pannel to be fixed with nails on the existing ply. MAKE:ANAKON/ECOPHON/HIMALYA ACOUSTIC/ARMSTRONG/DEXUNE. (NS)

Providing and Fixing of Spandex stretch System on G.I studs 2400mm X 50mm web flanges 15 & 50mm fully knurled giving it high strength, hot dipped galvanized steel With 120GSM zinc coating specially designed for Acoustic vibration management and long life with a backing 50mm thick Rock wool @48kg density insulation intact with chicken mess wires. 600x1200x15mm Magnesite pine wool tile with NRC 0.9-1 to be mechanically fastened on the G.I Studs. Then 12mm clip rail system are screw fixed on to the 12 mm MDF waterproof and Acoustics panel’s .Then the Spandex is stretched over the clip rail system. The installed system should provide NRC OF 1.00. Spandex colour as per Architect choice-Ref attached specifications for more details. . MAKE: BAUX/ANAKON/HUNTER DOUGLAS. (NS)

Providing and fixing 5mm thick Lacer glass fixed over 10mm thick MDF Board as per entire satisfaction of engineer in charge. (NS)

Providing and Fixing of Akous wood grooved panel having system NRC up to 0.88 with lineal perforation. The high grade MDF/HDDMR panels shall be melamine laminate of size 2440mm x128mm x 18mm with 2mm groove at 14mm pitch, Tongue and Groove edges for seamless mounting having density of 800kg/m3(base panel confirming to IS 12406 and laminated panel confirming to IS 14587). The back of the panels are perforated with a nonwoven fabric covering of 0.2mm for providing Sound absorption via the acoustic impedance method. Panel is fixed by using GI Framework 2400mmx50mmx0.50mm spaced at 600mmx600 c/c & 12 mm ply framework spaced at 400mm centres with suitable brackets and the system is backline with 50 mm polyester wadding@48kg density and along with all accessories example: chicken mesh and all. MAKE: ANAKON/ECOPHON/HIMALYA ACOUSTIC/ARMSTRONG/DEXUNE. (NS)

Providing and fixing rockwool 50mm thick and 18mm thick waterproof ply board on single side and 1mm laminate finish from outer side including necessary joinary fitting complete as per satisfaction of EIC. (NS)

Providing & Fixing in position M.S. hollow ISI Marked square / rectangular / round pipe structure made of different sizes as per structural drawing complete including cost of cutting, welding, grinding, painting and carriage to site complete fixed in position as per Architectural drawings and to the entire satisfaction of Engineer-in-charge.

Providing and fixing wooden partition for office cabin made of 50mm X 50mm thick padtal wood frame filled with 50mm thick rockwool and 18mm thick waterproof ply board on boath sides and 1mm laminate finish for inner and outer side including door and necessary joinary fitting complete as per satisfaction of EIC. Make of PLy & Laminate-Green/ Marino/Century/ Sonear (NS)

Providing and fixing 8mm thick toughned glass with beeding complete as per satisfaction of EIC. (NS)

Providing and fixing 5mm thick toughned glass with beedingcomplete as per satisfaction of EIC. (NS)

Supply of 80mm thick PUF insulated Wall Panel with 0.60mm thick PPGI sheet with micro ribs both sides with PUF Density 44 Kg/m3 +-10% in metallic tongue and Groove joint system, cut to size, with no loading of wastage with additional 90 degree bends in Male & Female groove to have proper sealing, Strength & Air Tight joints Panel to Panel, CFC free & Ozone friendly. (Pentane Based) Including flashing, Top and bottom channels, outer corners, inner corners, roof channels, gutter, sunshade including hardware and trasportation complete in all respects. (NS)

Supply of 70/40mm thick PUF insulated Roof panel with 0.60mm thick corrugated profile sheet from outside and micro ribbed 0.50 mm thick PPGI inside with PUF Density 42 Kg/m3 +- 5% with proper overlapping of two corrugations and projections on all sides, CFC free & Ozone friendly.(pentane Based) Including flashing , Top and bottom channels, outer corners ,inner corners,roof channels, gutter, sunshade including hardware and trasportation complete in all respects.

Supply of Single Leaf Clean Room doors shall be of 44mm leaf thickness, 0.80mm-GP/SP powder coated metal sheets on both sides (60-80 microns) filled with Fire Retardant Grade PUF Density 42 Kg/m3 instead of Honeycomb/Rockwool. The door fitted with 1.2mm GPSP Powder coated Chowkhat. The following accessories will be provided with doors. Item includes cost of SS ball bearing hings, Hydraulic door closer ,SS dead lock with both sides key operations,SS D type handle both sides,Double glazed view glassof size 400X 600mm with SS channel, concealed tower bolt for double leaf door, automatic doorbottom drop seal, door cap complete in all respect as per satisfaction of EIC. (NS)

1000 x 2100mm (Single Leaf Door)

1200 x 2100mm (Double Unequal Leaf Door)

THREE TRACK SLIDING WINDOW.Providing and Fixing of Factory made UPVC approved colour Sliding window Three Track made of extruded Profile with wall thickness of 2.2mm(+ -0.2mm). Window Profile with hollow section with multi chamber, Frame (108mm X 45mm), Sliding Sash(39mmX75mm) Sliding Mesh Sash (25mm x58mm) Sliding Interlock(0ne vertical length in each Shutter) (45.5mm X 28mm) Glazing bead(20mmX18mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc. Making arrangement for fixing of hardware. EPDM gasket .1.2mm(+-0.2mm) thick, Galvanized steel frame(30mmX18mm) 2 nos, Sliding Sash (30mmX 18mm)and sliding mesh sash (26mmX10mm) to be inserted in required profile, Frame will be fixed to the wall with 8mm x100mm long fastners, 5mm thick glazing with approved make. Hardware: Sliding handle made of Zinc Alloyed (approved colour powder coating) with Transmission gear made of mild steel with multi point locking system./Touch lock, Steel roller system. Stainless steel wire, Drainage cap etc.(NS)

Providing and fixing 16mmdia fastners including including drilling and fixing complete as per satisfaction of engineer in charge. (NS)

Providing and fixing aluminium profile skirting. (NS)

Extra for carriage of material beyond first 5 kms from approved quarry to the site of work.

Fine Sand

Coarse Sand

Stone Ballact & Bajri

ELECTICAL WORK

SURFACE PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWITCHES: CSR 38.07

Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/ 25mm dia (ISI Marked) installed on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), MS saddle clamp, PVC Circular junction Boxes (Four way 1½" deep for walls), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material and painting as required:-

Wiring fan point (Without fan box)

Wiring light point

Wiring call-bell point

Wiring 6Amp. wall socket point

Wiring 6Amp. Plug control comprising wall socket point

Wiring 16/20Amp. power plug control point

SURFACE TV, TELEPHONE & NETWORKING SOCKETS OUTLET POINTS (USED FOR HGW, PVC CONDUIT & HDPE PIPE WIRING SYSTEM WITH MODULAR ACCESSORIES): CSR34.07

Wiring TV socket, Telephone socket and Networking socket points on surface etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having TV sockets, Telephone sockets RJ11 & Networking socket RJ45 (one module), covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:-

Wiring TV socket point (one module)

PVC, HDPE PIPES & PVC FLEXIBLE PIPES:

Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III & HDPE pipes (ISI marked) as per IS:4984:1995 for wiring purposes including bends, junction boxes, Steel hooks, M.S. saddle clamps and other petty materials etc., as per PWD General Specifications:-CSR 34.12

Heavy Gauge PVC Conduit Pipe 25mm dia. (On Surface)

Heavy Gauge PVC Conduit Pipe 32mm dia.(On Surface)

Heavy Gauge PVC Conduit Pipe 25mm dia. (Flushed)

Heavy Gauge PVC Conduit Pipe 32mm dia. (Flushed)

Supply and erection of PVC flexible pipe complete without compression glands, locking arrangement, check-nuts as required:-

PVC Flexible Pipe 25mm dia.

G.I. EARTHING:

Supply erection of Chemical earthing of Sheet metal/ iron clad Switches and metallic cases etc., with 3 mtr long GI pipe including erection of the same, 3 metre below ground level with necessary Ground Resistance Improvement Powder (BackFill Compound), watering tank etc. and making connections (including boring & refilling).(NS)

GALVANIZED IRON PIPES AND G.I. EARTHING CSR 34.13

Fixing additional length of earthing with G.I. wire/ rope in G.I. pipe (Flushed in wall and floor) with sockets, elbows and Steel hooks including the cost of cutting and filling up of chases (with finishing the surface):-

Additional length G.I. wire 7/14 S.W.G. (7/2.18mm dia.) in 20mm dia. G.I. pipe (Flushed)

PVC INSULATED FR COPPER CONDUCTOR CABLES:34.09

Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:-

Overall size 1.5sq.mm (Un-sheathed)

Overall size 2.5sq.mm (Un-sheathed)

Overall size 6sq.mm (Un-sheathed)

Overall size 10sq.mm (Un-sheathed)

MINIATURE CIRCUIT BREAKERS/ RCBO's/ RCCB's:CSR 34.16

MINIATURE CIRCUIT BREAKERS:

Supply and erection of Miniature Circuit Breaker MCB's for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-

MCB Single Pole 6-32amp. (10kA, Curve-C)

MCB Triple Pole 40amp. (10kA, Curve-C)

MCB Four Pole 50, 63amp. (10kA, Curve-C)

SHEET METAL DOUBLE DOOR DISTRIBUTION BOARD FOR MCB's/ RCBO's/ RCCB's:CSR 34.17

Supply and erection of sheet metal Double Door Distribution Boards IP 43- IK09 metal door (dust protected) as per IS 8623-1&3, IEC 61439-1&3 suitable for flush mounting with fully insulated copper busbars, shrouded neutral bars, earth bars, cement spill protector, color- coded interconnecting wire set, cable ties, blanking plates and circuit identifications label and of required no. of ways for mounting miniature circuit breakers/ RCBO's/ RCCB's in the distribution board (For SP&N distribution board with provision DP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings and for TP&N horizontal distribution board with provision TPN/ FP MCB's/ RCCB's/ RCBO's as incomer and SP MCB's as outgoings) as per PWD General specifications including connections with suitable size of thimbles and bonding to existing earth etc:-

TP&N Horizontal Double Door Distribution Board 4 way each

TP&N Horizontal Double Door Distribution Board 6 way each

SUPPLY AND ERECTION OF WIRING ACCESSORIES:CSR 34.15

Supply and erection of switches, sockets and other accessories (flush piano type/ modular accessories) in the existing bakelite/ modular cover frame including fixing & connections and petty material etc.,:-

Ceiling Rose (Flush Piano type)

Call Bell 220/230 volts AC Ding Dong

Supply & erection of Indoor extruded aluminium LED tube fitting in aluminium alodized finish with opal diffuser Crompton (LTT8-20 With DMLN1LT8-16) with batten or equivalent model of Philips /Wipro / Havells including making connections (NS)

Supply & erection of reccessed mounted LED down lighter 12 watt, in powder coated white finished housing, round shaped, make Crompton (CDR-205-12-40-SL-NWH) or equivalent model of Philips/ Wipro/ Havell's, including making connections.

Supply & erection of reccessed mounted tiltable LED Spot light 6 watt, in powder coated white finished housing, round shaped, make Crompton (CDR-211-06-40-SL-NWH) or equivalent model of Philips/ Wipro/ Havell's, including making connections.

Supply & erection of Indoor suspended type linear LED fitting 36watt with opal diffuser Crompton (LCLP54-36-WW) including with suspended rope and other necessary material as required or equivalent model of Philips /Wipro / Havells including making connections

Supply & erection of LED Profile light in 25mm housing with diffuser cover,including making connections.

Supply & erection of Driver for LED Profile light , including making connections.

S/E of Electric ceiling fans of 1200mm sweep, Ortem/ Usha/ Crompton/ Havells make (Without regulator) capacitor type with double ball bearing, complete with 300mm down rod, canopies, shackles and suitable for operation on 230/240 volts 50 Hz single phase AC supply confirming to IS 374:1979 or 2 star rated, with latest ammendments including making connections and cost of petty material:

S/ E of wall mounting fans 400mm sweep Crompton make, Hi Flow Wave or equivalent of equivalent of Usha/Almonard/Havell's/Ortem with class B insulation dynamically balanced blades suitable for operation on 220/240 volts single phase 50 cycles AC supply including connections with petty material.

S&E of fresh air fan 10" sweep (Crompton/ Usha/Khaitan/ Havell's/ Almonard/Ortem make), propeller type complete with impeller, PVC louvers with moving chanel, totally enclosed motor with class-B insulation dynamically balanced blades suitable for operation on 220/240 volts single phase 50 cycles AC supply. including making connections & cost of petty material.

Supplying, laying, connecting and testing of annealed copper conductor PVC insulated PVC sheathed of telephone cable, 2 pair 0.5mm dia (Polycab/ Havell's/ Finolex/ RR Kabel/ Delton/ Ecko/ equivalent) in existing conduit/ trunking etc complete in all respects or desired by Engineer-in-charge.

Supplying, laying, connecting and testing of Co-axial copper Cable for TV ,in existing conduit/ trunking etc complete in all respects or desired by Engineer-in-charge.

SUPPLY AND ERECTION OF WIRING ACCESSORIES. CSR 34.15

BAKELITE SHEET:

Supply and erection of brown bakelite sheet white glazed translucent backside painted 3mm thick (thickness not less than 3mm) on the existing metal box/ metal inspection boxes including fixing and other petty material etc.

S/E of Modular type Double module Switch 32Amp. with modular plate cover and box including making connection and complete in all respects as desired by Engineer-in-charge.

XLPE INSULATED ARMOURED CABLES (ON SURFACE):

Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid (On Surface) as per PWD General Specifications:-

Overall size 25sq.mm (3½ Core) Armoured (On-Surface)

Overall size 16sq.mm (4Core) Un-armoured (On-Surface)

LT PANELS & MCCB's (MOULDED CASE CIRCUIT BREAKERS):

MCCB's (MOULDED CASE CIRCUIT BREAKER):

Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubical type) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100% Icu, 100% neutral with spreader links and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:-

MCCB Four Pole 63/80/100amp., 415volts, ≥25kA Fixed Magnetic and Adjustable Thermal Setting

MS SHEET ENCLOSURE FOR MCCB's:

Supply & Erection of indoor type MCCB enclosure of suitable size having provision for MCCB with extended rotary handle. The Enclosure shall be made from 14/16 SWG CRCA sheet, confirming to IS 8623/1977-82. The door should be double folded without edge and the gasket should be ‘S’ type puffed neutral rubber gasket for long life. The hinges of the door should be bolted type with double hole arrangement. The Enclosure door lock should be quick openable type spring loaded. There should not be any special tool or key to open the lock. The Enclosure will be wall mounting type having provision for cable entry from bottom/top with cable glands etc. The sheet metal is sprayed with corrosion resistant etch primer. The finishing treatment shall be applicable with air drying paint (7/9 tank Powder coated process should present in company pemises) after necessary putty work:-

MS Sheet Enclosure having provision for MCCB 40-160Amp.with extended rotary handle (Approx. Size 500mm x 300mm x 200mm)

PROVIDING CASSETTES AND SPLIT AC

Supply of ceiling mounted cassette type Air conditioner Non Inverter of 3TR capacity Daikin make Cool only (without copper pipe, Drain pipe & cables etc

Supply of Wall mounted Spilit Air Conditioner Non Invertor of 1.0 TR capacity Daikin make Cool only (without copper pipe, Drain pipe & cables etc

Supply & Errection of Interconnecting copper piping with nitrile installation

Supply & Errection of Interconnecting communication wire for indoor to outdoor

Supply & Errection of Drain pipe of following sizes 6-10 Kg Pressure with necessary fittings such as elbow,sockets and reducers etc.

25mm dia

32mm dia

Supply & Errection of MS stand for Outdoor Unit of cassette type Air conditioner 3TR

Supply & Errection of MS stand for Outdoor Unit of Split type Air conditioner 1TR

Supply & Errection of 4KVA Voltage Stablizer Make V Guard

Installation of cassette type Air conditioner 3TR

Installation of Spilit Air Conditioner 1.0 TR