8361 SPECIAL REPAIRS TO BUILDING NO.P-47 TO P-50 AND P-54 AT KATTABOMMAN UNDER GE TIRUNELVELI

Amount

Dismantling corrugated or semi corrugated Asbestos Cement sheets in roof covering, complete all as specified and directed.

Supply and fixing Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Supply and fixing prepainted galvalume aluminium zinc coating GI base plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof, fixed with self tapping screws complete all as specified and directed.

Demolition of cement concrete (unreinforced) in roofs and other than ground Floor complete all as specified and directed.

Material and labour for providing 40mm thick cement concrete of type B-1, 1:2:4 (20mm graded aggregate) with water proofing compound @0.2% by weight of cement even and fair surface complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Material and labour rendering 10mm thick plastering on fair faces of concrete surface in CM 1 : 4 with water proofing compound @ 0.2% by weight of cement finished even and fair complete all as specified and directed. Note:- Liquid water proofing compound shall be measured and paid separately.

Material and labour APP based polymeric water proofing membrane minimum weighing 3Kg/ Sqm minimum 3 m thick reinforced with polyester non-woven fabric (weight not less than 150 gms/Sqm) laid over priming/tack coat with bituminous primer at the rate of 0.50 ltr / Sqm on roof surfaces, by forced application and vertical surfaces up to grooves and width of overlap 75mm at the sides and 100mm in ends and applying coat of hot blown bitumen 85/25 at the rate of 1.20 Kg per Sqm over APP membrane complete all as specified and as directed.

Supply only integral water proofing compound

Demolition of cement concrete (unreinforced) in ground Floor complete all as specified and directed.

Material and labour for 25mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and directed.

Material and labour for providing Colour non skid joint free ceramic tiles 7 to 8mm thick Square/rectangular, area of each tile exceeding 0.18 Sqm but to exc 0.38 Sqm in floor of approved quality and pattern set , and jointed in neat cement slurry and pointed in coloured cement to match in floors over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

Material and labour for 40mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and directed.

Material and labour for Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc.,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

Material and labour for Acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors including screed bed or bedding layer of mortar 15 mm thick in CM 1:6 complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Material and labour for glazed ceramic coloured tiles of size 300x450mmx7mm/350x250x7mm thick on vertical surfaces such as skirtings, dados and riser to steps ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10mm thick in CM 1:4 complete all as specified and directed.

Material and labour for Colour non skid joint free ceramic tiles 7 to 8mm thick Square/rectangular polished ,on vertical surfaces such as skirting dado riser to steps ,set and jointed in neat cement slurry and pointed in coloured cement to match in floors over 10mm thick backing coat in CM 1:4. complete all as specified and directed.

Material and labour for 50mm thick plain cement concrete type B-1, 1:2:4 (using 20mm graded aggregate) as in floor complete all as specified and directed.

Forming construction Joint 30mm deep x 10mm wide filled with sealing compound grade 'A' complete all as specified and directed.

Demolition of reinforced cement concrete of roofs, floors (other than ground floors), beams, staircases, landings, chajjas and similar suspended work complete all as specified and as directed .

Material and labour for RCC 1:2:4 (Nominal Mix) type B1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies deck slab and shelves and the like complete all as specified and directed.

Formwork to soffits of suspended slabs such as landings, shelves and similar work : not exceeding 200mm thick (horizontal or sloping) for rough finished surfaces of concrete complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over cut to length bent to shape required incl cranking , bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Material and labour PCC 1:3:6 type C1 20 mm graded aggregate 75 mm thick in plinth protection finished even and fair without using extra cement complete all as specified and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins arches, pillars etc all as specified and as directed.

Material and labour for brick work with fly ash bricks straight or curved on plan exec 6 mtr mean radius with cement mortar 1: 6. complete all as specified and directed.

Taking down cement plaster on brick or stone wall including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material and labour for rendering 10mm thick on brick or concrete surfaces in CM 1:6 on fair faces of brick work or concrete surfaces of wall finished even and smooth (without using extra cement) complete all as specified and as directed.

Material and labour Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2mm thick wall care putty on wall complete all as specified and directed.

Material and labour Preparation of newly plastered surfaces of walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Material and labour for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of alkali resistant primer over 2mm thick wall care putty on wall complete all as specified and directed.

Material and labour for preparation of old plastered surfaces & applying two coat of white wash on ceilings complete all as specified and as directed..

Preparation of old steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Material and labour for preparing old decorated wooden or wood based surfaces over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

Taking down Chowkhats or frames exc 1.50 sqm and n.exc 4.00 sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed..

Taking down Chowkhats or frames n.exc 1.5 Sqm in each with shutters (Without taking of shutters from the frame) and removing from site complete all as specified and directed.

Material and labour for plain solid straight chow at and frames wrought framed received on the solid rounded or chamfered put together with glue pinned at joint in second class hardwood complete all as specified and directed.

Material and labour Flush door shutters, 35mm thick, solid core construction, with both faces is covered with decorative face veneer with lipping/frame to match and glazed vision panels of size 20 cm x 20 cm, including lipping complete all as specified and as directed. (Note- Glass shall be measured and paid separately)

Supply and fixing glazed or gauged shutter 30 mm thick, 2nd class hard wood, divided into squares with plain, chamfered or rounded, mitered and rebated with sash bars any numbers, provided with stiles and rails, sizes at members of shutters as specified in SSR Part I Sec 8 clause 8.24 (b) all as per specified and as directed.

Material and labour for French polishing on surfaces of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

Supply and fix powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fix etc complete all as specified and as directed.

Supply and fixing aluminium sliding windows powder coated with three track frame of section 92mmx31.75mmx1.50mm and shutter of section 18mmx40mmx1.55mm width sliding channel with rubber gasket beading and locking arrangement etc complete all as specified as directed.

Material and labour Powder coated Anodised aluminium window shutters, side hung type without sash bars, aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-21 100mm long (2 no) suitable handle (1 no) complete all as specified as directed.

Supply and fixing in repairs Door closer Aluminium Extruded section body hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified as directed.

Supply and fixing in synthetic fabric roller venetian blinds of 1 st quality of top to bottom movement type of specified colour including brackets, rollers, accessories etc complete all as specified and directed.

Supply and fixing solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as per specification complete all as specified and directed.

Material and labour factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specifications complete all as specified and directed.

Dismantling boarding any description fixed in any position with screws complete all as specified.

Material and labour for 12mm thick Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified as directed.

Material and labour for 5.50mm thick tinted Sheet glass, ordinary quality and glazing with aluminium beading in square exc 0.5 sq. m in each pane complete all as specified as directed.

Material and labour for pre-laminated particle board 18mm thick, exterior grade, prelaminated both side with decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply & Fixing of stainless steel Handle fancy type 100 mm size complete all as specified and directed.

Material and labour for PVC edge lipping, 3/4mm thick fixed with nails for 18/19 mm thick pre-laminated particle board & shutters & etc, complete all as specified and directed.

Supply & Fixing stainless steel roller of size 25mm x 12mm, 450mm length with male female rolling brackets suitable for baskets complete all as specified and directed , Make : Evershine,Olive or equivalent

Supply and fixing for drawer lock with 6 Brass lever locking mechanism and strong sheet metal body zinc plated fancy type complete all as specified and as directed. (Make : Godrej or equivalent)

Material and labour for hacking our old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

Supply and fix 4.0mm thick plain sheet glass of ordinary quality and glazing with oil putty n exc 0.5 Sqm fixed to steel framing complete all as specified and as directed.

Supply and fixing butt hinges heavy weight cold rolled mild steel and fixed in 125mm long complete all as specified as directed.

Supply and fixing in repair butt hinges heavy weight cold rolled mild steel and fixed in 125mm long complete all as specified as directed.

Supplying and fixing aluminium anodised barrel tower bolts of extruded section 150 mm complete all as specified as directed.

Supplying and fixing Extruded aluminium handles fabricated type anodised 150mm long complete all as specified as directed.

Material and labour for aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections (250 mm length) complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified as directed.

Supply and fixing Steel rolling shutters 1.25mm thick , with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete gear operated type with bevel gear box and crank handle complete all as specified and as directed

Supply only ball bearing wheel for the rolling shutter complete all as directed by Engineer-in-Charge.

Supply only Safety lever locks mild steel with 4 levers for the rolling shutter complete all as directed by Engineer-in-Charge.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Dismantling wall and ceiling boards, fibre or pulp, insulation etc. in insulation boards slabs, blankets any thickness incl cover fillets complete all as specified and as directed.

Material and labour Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having knurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified

Material and labour for 8mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having Phillips head with under head cutter at 200 mm centre to centre, including finishing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) finished with 2mm thick putty over calcium silicate board two coats oil bound distemper over a coat of primer complete all as specified and directed.

Supply and fixing in 500 litres capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) and fixed in position all as specified in SSR Pt- I including dismantling and remove from site complete all as specified and directed.

Supply and fixing in repairs of ball brass valve, high pressure with polythene float and fly nut, screwed for iron pipe or brass ferrule of size 20 mm complete all as specified and directed.

Supply and fixing in repair vitreous china wash basin size 550 x 400 mm white flat back excluding taps waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

Supply and fixing in repair pillar taps, fancy type, chromium plated, screwed down high pressure screwed for iron pipe, fancy type 15 mm dia bore complete all as specified and directed.

Supply and fixing in repairs 15mm bore bib taps Chromium plated, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fixing in repairs 15mm dia concealed Angle Stop valves, cast copper alloy, chromium plated screwed down, high pressure, screwed both ends for iron pipe complete all as specified and as directed.

S& F in repair Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe and Union for discharge pipe complete all as specified and directed.

Supply and fixing in repairs Vitreous china wash down water closet pan pedestal pattern (EWC) including plastic water closet seat, closet pattern with flat bottom, and cover and aluminized hinge device complete all as specified and directed by EIC.

Supply and fixing in repair PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float and handle including brackets 10 Ltrs capacity including flush pipe and PVC connections etc.,complete all as specified and directed.

Supply and fixing in repairs Hand shower health faucet Abs body with wall hook and 1 meter long easy flex tube in chrome finish hose pipe for EWC including hinges complete all as specified and directed.

Material and labour WC connector 110 mm PVC SWR for WC complete all as specified and directed.

Taking down steel tubing and connections and removal to store of 15 mm dia complete all as specified and directed.

Taking down steel tubing and connections to removal to store of 20 mm dia complete all as specified and directed.

Supplying and fixing or laying 20 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Supplying and fixing or laying 25 mm dia CPVC pipe SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engineer in charge.

Supply and fixing in repair PVC connection 15 mm size with PTMT nuts of length 450 mm long complete all as specified and directed.

Dismantling of cast iron/PVC drain pipes jointed in cement mortar and taking out of walls for 75mm/100mm dia of Pipe complete all as specified and directed.

Supply and fixing PVC (SWR) pipes single socketed, in any length with rubber ring joints 75 mm dia bore pipe, fixed to walls complete all as specified and directed.

-ditto all as per item above but 110mm dia of pipe

Supply and fixing fix PVC (SWR) branch piece single Y equal or unequal 75mm with access door complete all as specified and directed.

Supply and fixing fix PVC (SWR) branch piece single Y equal or unequal 110 mm with access door complete all as specified and directed.

Supply and fixing fix PVC (SWR) bends 75 mm with access door complete all as specified and directed.

Supply and fixing fix PVC (SWR) bends 110 mm with access door complete all as specified and directed.

Supply and fixing in PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm dia outlet complete all as specified and directed.

E/M WORKS

Taking down existing unserviceable point wiring of any description/type/ size of light/fan/tube/power/two way/bell etc on TW batten/conduit including removal of batten/ conduit/ gutties/ wooden boards/ switches/ sockets/ regulators/ light fittings etc and separating the serviceable items like fan regulators and light fittings for re-use under respective items and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes complete all as specified and directed.

Taking down the existing unserviceable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

Taking down the existing unserviceable sub main wiring of any type / description as existing at site including making good the disturbed surfaces to match with the existing finishes complete all as specified and directed.

Material and labour for point wiring with two single core 1100 V grade FRLSH insulated unsheathed cables of size 1.5 Sq mm multi-stranded Copper conductor FRLSH, drawn through and including rigid PVC conduit and conduit accessories in surface/wall including making good to disturbed surfaces in wall/roof/ceiling where required complete with 3 mm hylam sheet cover with an earth wire of PVC cable 1.5 Sqmm FRLSH multi stranded copper conductor and connected to all metal boxes and common earth dolly all as specified and directed for one light point controlled by one, one way switch complete all as specified and directed by Engr-in-Charge.

Description all as per item No 102 here in before but for one Ceiling Fan / exhaust fan point controlled by one, one way switch and regulator

Description all as per item No 102 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on same board .

Description all as per item No 102 here in before but for one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board .

Description all as per item No 102 here in before but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 15 amps switch socket combination point incl running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Description all as per item No 102 here in before but using 4 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 15 amps switch socket combination point incl running of 4 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly.

Material and labour sub main wiring with two single core 1100 V grade conforming to IS 694 PVC insulated unsheathed cables 6 Sq mm multi stranded copper conductor drawn through non metallic PVC rigid conduit and conduit accessories on walls/roof/floors/ceiling etc with an earth wire of one run 6 sqmm copper wire earth continuity conductor etc. complete all as specified and directed by Engr-in-Charge. Note : Three runs of 6 sqmm cable and one run of PVC conduit shall be measured as one run for payment purpose.

Supply and fixing sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnetic locking system complete including removal of old unsv sheet metal enclosure complete all as specified and directed.

Supply and Fix Sheet metal enclosures, double door, MCB DB, 4 way, TPN, AC 415 Volts complete all as specified and directed.

Supply and Fix Sheet metal enclosures Vertical TPN DB 8 way suitable for MCCB incomer 100Amp, double door, TPN, AC 415 Volts complete all as specified and directed.

Supply and fixing MCCB TP/FP, 100 Amps 415 Volts, 16 KA, 50 Hz, AC with fixed overload and fixed short circuit rating, suitable for fixing on VTPN MCB DB as incomer complete all as specified and directed.

Supply and Fix MCB TPN, AC 415 Volts 40/63 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and Fix in repairs MCB SPN, AC 240 Volts 32 Amps 10KA, 50Hz 'C' curve complete all as specified and directed.

Supply and fixing MCB SP 6 to 30 Amps 240 volts, 10 KA, AC, 50Hz, 'C' curve for fixing on MCB DB's complete all as specified and directed.

Supply and fixing wall mounted LED 20 watts, batten type fitting for surface and pendant application, 230 volts with polycarbonate housing and integrated electronic driver connector block etc complete with all accessories internally pre wired and necessary mounting arrangements and connection from ceiling rose to fitting including dismantling the existing unserviceable fitting, complete all as specified and as directed.

Supply and fix LED mirror light fitting surface mounted type 2 feet x 10W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc, complete all as specified and as directed.

Supply and fixing Recess mounting flat panel 36 Watt LED fitting 2x2 feet with flat panel to enhance the, white powder coated CRCA housing complete with full window acrylic diffuser & electronic driver, high brightness LEDs etc complete with all accessories internally prewired and necessary mounting arrangements, complete incl removal of old unsv fitting all as directed by Engineer-in-charge.

Supply and fixing Highbay luminaries with Al die-cast housing for efficient thermal heat management and secondary modular lens optics for optimized light distribution to improve operational efficiency, with EMC/EMI compliant potted driver, flicker free illumination 100 W complete all as specified and directed.

Supply and fixing Flood light fitting LED type 100 Watt, 42700 lumen output, made up of pressure die cast housing, asymmetric wide beam with IP 66 protection, lens design & optical integration with single die ceramic base high power LED to ensure uniform distribution and maintenance free system all as specified and directed by Engr-in-Charge. Make: PHILIPS, Cat No BVP485 LED427 CW AWB PSU SPD GR or equivalent in makes as mentioned in PS.

Supply and fix Post top lantern fitting LED type with 40 Watt LED made in cast aluminium spigot housing with decorative opal acrylic diffuser and IP 65 protection including 3 core flexible conductor cable for light connection all as specified and as directed.

Taking down old unserviceable light fitting and Supply and fix in repairs LED Security light fitting 18 W LED complete with all accessories internally pre wired and including connecting up with twin / three core flexible copper conductor cable with suitable size from ceiling rose to fitting etc fixing on wall with suitable bracket, complete all as specified and as directed.

Supply and fix GI Pipe light grade bend to shape as required for fixing of street light including fixing on wall of size 25 mm all as specified and directed

Supply and fix GI Pipe medium grade bend to shape as required for fixing of street light including fixing on wall of size 25 mm all as specified and directed.

Supply and Fix Switch Piano, flush type, Single Pole, 230 Volts, AC, one-way 5 Amps all as per specified and directed.

Supply & Fix Switch socket outlet, multipurpose, flush type, 3/5 Pin,AC, 230 Volts, 5 Amps all as per specified and directed.

Supply & Fix switch socket outlet, multipurpose, flush type, 5 in 1, 5 A/16 Amps, AC, 230 Volts all as per specified and directed.

Supply and fixing electronic type fan regulator rotary 2 modules step 100 watts complete all as specified and directed.

Supply and fixing ceiling rose three terminal surface Bakelite type AC 50 Hz 230 volts of size 65 x 50 mm complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of earth plate not less than 1.5 Mtr below normal ground level, earth plate surrounded from all sides by 15cm thick and packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using galvanized earth wire 4mm dia connected by means of bolts, nuts, check nuts and washer of galvanized iron or steel, provision of 15 mm dia GI pipe medium grade for protection of GI earth wire and 20mm dia GI pipe medium grade for watering arrangement and PCC (1:3:6) , type C1 chamber, MS funnel, wire gauge, 50 mm thick RCC 1:2:4, type B1 earth pit cover with 6 Nos, 8 mm dia high strength deformed steel TMT bars on both ways including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to distance not exceeding 50 metre, provision of charcoal and salt complete all as shown in electrical plate No 3 of schedule Part-I

Vinayaga constructions

VVM CONSTRUCTIONS

MSR ENTERPRISES

sri manikandan enterprises

JR ENTERPRISES

AnnaiEnterprises