Loading
Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical | Accepted-Technical responsive |
| 2 | Rejected-Technical | Rejected-Technical NON RESPONSIVE |
| 3 | Rejected-Technical | Rejected-Technical NON RESPONSIVE |
| 4 | Rejected-Technical | Rejected-Technical NON RESPONSIVE |
Tender Value
₹13.4 L
EMD Value
₹26,880
Closing Date
27 Mar 2026, 12:00 pmClosed
EE
PHED DN BARI
Proposal of Replacement of Centrifugal Pump set and Starter with pannel board at Gendapura Pump House under UWSS Sarmathura Sub Division Baseri Under Summer Contingency 2026 .
2026_PHCJA_547216_1
77/2025-26
Open Tender
Civil Works
Percentage
30 days
BARI
REFER TO TD
2 documents required · 2 mandatory
₹500
EE PHED DN BARI/ MD RISL JAIPUR
₹26,880
Yes
20 Apr 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
27 Mar 2026
19 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing at site with necessary packing, Horizontal Centrifugal Split Casting pumps with 4 pole induction motor operating at synchronised speed of speed 1500 RPM as per IS 12615: 2011 or amended up to date , CI casing and casing ring, SS 316 impeller, SS 410 Shaft and shaft sleeve, coupling guard, common base plate, foundation bolts, Cement concrete foundation etc. complete with all respect as per the specification and scope of work and direction of Engineer in Charge of following range of duty conditions.
Note: Duty condition of required pump shall also be mentioned in BoQ.
Discharge 20 to 30 LPS and head 61 to 70 M
AT GENDAPURA PUMP HOUSE FOR ESR GENDAPURA PUMP HOUSE 2 Nos. | 2 | EACH | 4,17,667 | ₹8,35,334 |
| 2 | Supply & Fixing XLPE insulated / P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor Armoured of IS:7098-I/1554-1 approved make in ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick under layer of sand, second Class bricks covering, refilling earth, compaction of earth, making necessary connection, testing etc. as required of size.
16.0 Sq.mm, 4 core | 40 | MTR | 234 | ₹9,360 |
| 3 | Providing and fixing of flanged/ plain ended MS Specials made from MS sheet strips of relevant IS specification of approved thickness by welding, lowering, laying, aligning, fixing in position at all level/ depths in trenches complete including all taxes, material, labour, inside lining, outside coating, testing and commissioning along with pipe line as per technical specifications and direction of Engineer-in-charge.
MS pipe specials up to 600mm dia (with minimum 5mm thickness sheet) | 300 | KG | 126 | ₹37,800 |
| 4Providing, lowering, aligning, fixing in position in pipe line, CI D/F Sluice valves straight and pocket less body passage of approved make of following Pressure rating & dia complete, confirming to IS:14846 (amended up to date) and of following specifications: Body, Bonnet, Wedge, Gland, Thrust Plate, Cap & Hand wheel of Grey cast iron of IS:210/ FG200 Stem - AISI- 410 ,Body Seat ring, Wedge facing ring & Bushes - LTB2/ SS , Face to face dimensions as per IS 14846/2000 (amended up to date) ,Epoxy ( Non-Toxic- suitable for drinking water) applied inside and outside, Flanges Drilled as per IS 1538. Nut-Bolt confirming to IS:1363 and IS: 1367/ CS/ galvanised steel Insertion rubber of black EPDM 6mm thick . Sluice valves including all jointing & jointing material, labour, testing and commissioning along with pipe line as per Technical Specifications and as per direction of Engineer-in-charge. Note: Rates are exclusive of tail piece/ dismantling joints and earth work. Manually Operated CI Sluice valve of Class PN-1.0 | |||||
| 5 | 100 mm HW | 12 | EACH | 8,649 | ₹1,03,788 |
| 6 | 150 mm dia | 6 | EACH | 21,821 | ₹1,30,926 |
| 7 | SITC of Soft Starters with panel supplied by manufacturer
conforming to applicable standards with logic inputs & outputs, relay outputs and analogue outputs, plug in I/O connections, display of electrical parameters, state of load & operating time, RS 485 serial link for connections to Modbus.
AT GENDAPURA PUMP HOUSE FOR KILA ESR 37 KW 2 Nos. | 2 | EACH | 1,13,555 | ₹2,27,110 |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.11 MB
TD77.pdf
Tender Documents • 11.34 MB
BOQ_975829.xls
BOQ • 0.39 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .